Synthesis of conjugated polymers containing anthracene moiety and their electro‐optical properties

Both fully conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene‐alt‐9,10‐anthrylene vinylene] [poly(MEHPV‐AV)] and conjugated/nonconjugated block copolymers poly(alkanedioxy‐2‐methoxy‐1,4‐phenylene‐1,2‐ethenylene‐9,10‐anthrylene‐1,2‐ehthenylene‐3‐methoxy‐1,4‐phenylene)[poly(BFMPx‐AV), (x = 4, 8, and 12)] were synthesized by Horner–Emmons reaction utilizing potassium tert‐butoxide. Of these synthesized polymers poly(BFMP4‐AV) and poly(BFMP8‐AV), which has four and six methylene groups as solubility spacer in the main chain exhibited liquid crystalline to isotropic transition in addition to the two first order transitions. Light‐emitting diode (LED)s made from the organic solvent soluble poly(BFMP12‐AV) as emitting layer showed blue shift in the emission spectrum compared to the one made from fully conjugated poly(MEHPV‐AV). Although poly(BFMP12‐AV) had higher barrier to the electron injection from cathode than poly(MEHPV‐AV), the luminance efficiency of LED made from poly(BFMP12‐AV) was about 25 times higher than the one made from poly(MEHPV‐AV), which had fully conjugated structure. LEDs fabricated by both poly(BFMP12‐AV) and poly(MEHPV‐AV) exhibited Stoke's shift in the range of 155 to 168 nm from the absorption maximum due to the excimer formation between the ground and excited state anthracene groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3173–3180, 2000     

Photoluminescent,liquid‐crystalline,and electrochemical properties of para‐phenylene‐based alternating conjugated copolymers

Novel liquid‐crystalline alternating conjugated copolymers [ P(P(6)CN‐alt‐Cz) and P(P(6)CN‐alt‐MeP) ] with phenylene and carbazolylene or phenylene with methyl substitution onto the main chain have been synthesized through palladium‐catalyzed Suzuki coupling reactions. The influence of the incorporation of carbazolylene and the substituted phenylene into the main chain on the thermal, mesomorphic, and luminescent properties has been investigated by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, polarized optical microscopy, ultraviolet–visible spectroscopy, photoluminescence (PL), and cyclic voltammetry. These polymers show highly thermal stability, losing little of their weights when heated to 360 °C. The conjugated copolymers exhibit liquid crystallinity at elevated temperature. The existence of the chromophoric terphenyl core endows the copolymers with high PL and the polymer P(P(6)CN‐alt‐Cz containing carbazolylene unit can emit more pure blue light. All the copolymer films with low band gaps about 2.3–2.4 eV undergo reversible oxidation and reduction processes, significantly lower than the band gap of poly(p‐phenylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 434–442, 2010     

Advances in liquid crystalline conjugated polymers

We review advances in liquid crystalline (LC) conjugated polymers by focusing on (i) ferroelectric and (ii) photoresponsive LC conjugated polymers. In Part 1, LC polyphenylene derivatives were synthesized through substitution of fluorine‐containing chiral LC groups into side chains. Poly(para‐phenylene) [ P1 ] and poly(meta‐phenylene) [ P2 ] derivatives showed chiral smectic C phases responsible for ferroelectricity. They exhibited quick response to electric field, giving switching times of <1 s between two bistable states. The spontaneous polarization (P_S) of P2 remained unchanged even after the electric field became zero, affording the residual polarization (P_R) whose value was the same as that of P_S. This indicates that P2 has a potential memory function based on FLC nature. In Part 2, poly(para‐phenylenevinylene) [ P5 ] and poly(bithienylene‐phenylene) [ P6 ] derivatives were synthesized by introducing dithienylethene moieties into side chains. Drastic quenching of fluorescence occurred when the photoresponsive moiety changed from an open form to a closed one upon an irradiation of ultraviolet light. The quenched fluorescence was recovered through a photoisomerization from the closed form to the open one. Macroscopically aligned P6 film exhibited a linearly polarized fluorescence with significant anisotropy. Reversible quenching and emitting behavior in anisotropic fluorescence was controlled by the photochemical switching. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2463–2485, 2009     

Copoly(p‐phenylene)s containing bipolar triphenylamine and 1,2,4‐triazole groups: Synthesis,optoelectronic properties,and applications

Two novel copoly(p‐phenylene)s ( P1 – P2 ) containing bipolar groups (12.8 and 6.8 mol %, respectively), directly linked hole transporting triphenylamine and electron transporting aromatic 1,2,4‐triazole, were synthesized to enhance electroluminescence (EL) of poly(p‐phenylene vinylene) (PPV) derivatives. The bipolar groups not only enhance thermal stability but also promote electron affinity and hole affinity of the resulting copoly(p‐phenylene)s. Blending the bipolar copoly‐(p‐phenylene)s ( P1 – P2 ) with PPV derivatives ( d6‐PPV ) as an emitting layer effectively improve the emission efficiency of its electroluminescent devices [indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS)/polymer blend/Ca (50 nm)/Al (100 nm)]. The maximum luminance and maximum luminance efficiency were significantly enhanced from 310 cd m^?2 and 0.03 cd A^?1 ( d6‐PPV ‐based device) to 1450 cd m^?2 and 0.20 cd A^?1 (blend device with d6‐PPV / P1 = 96/4 containing ～0.5 wt % of bipolar groups), respectively. Our results demonstrate the efficacy of the copoly(p‐phenylene)s with bipolar groups in enhancing EL of PPV derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electro‐optical behavior of ferroelectric liquid crystalline polyphenylene derivatives

Liquid crystalline (LC) polyphenylene derivatives, such as poly(para‐phenylene) (PPP), poly(meta‐phenylene) (PMP), poly(meta‐biphenylene) (PBP), and poly (meta‐terphenylene) (PTP) derivatives, were synthesized through substitution of fluorine‐containing chiral LC groups into side chains, with an aim to develop ferroelectric LC (FLC) conjugated polymers. All the polymers, except PTP, showed enantiotropic liquid crystallinities, where several types of mesophases were observed in both heating and cooling processes. Among them, PPP and PMP derivatives showed chiral smectic C (S_C*) phases responsible for ferroelectricity. In fact, they exhibited quick response to electric field, in spite of high viscosities inherent to polymers, giving rise to switching times of less than 1 s between two S_C states with reversely directed alignment. Hysteresis loops between the polarization and electric field were also observed for PPP and PMP. The spontaneous polarization (P_S) of PMP remained unchanged even after the electric field became zero, affording the residual polarization (P_R) whose value was the same as that of P_S. This indicates that PMP has a prospective memory function based on FLC nature. The present study is the first report for realizing a quick switching in macroscopic alignment using electric field and also for generating a potential memory function in π‐conjugated polymers. It is elucidated that unusual polymer main chains such as polyphenylenes can be used to prepare new ferroelectric polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3591–3610, 2008     

Synthesis,Electrochemical, and Optical Properties of a Novel PPV/PPE Block‐Copolymer

Summary: A novel poly(p‐phenylene vinylene) (PPV)/poly(p‐phenylene ethynylene) (PPE) block‐copolymer was synthesized by a cross‐coupling polycondensation with Pd(PPh₃)₂Cl₂ and a phase‐transfer catalyst, and was confirmed by ¹H NMR and IR spectroscopy and elemental analysis. The thermal, electrochemical, and photoluminescent properties of the new copolymer have been investigated. The incorporation of triple bonds into the cyano‐substituted PPV (CN‐PPV) backbone leads to higher oxidation and reduction potentials than poly(2‐methoxy‐5‐(2‐ethylhexyloxy)‐p‐phenylene vinylene) (MEH‐PPV) and CN‐PPV, potentially making the copolymer a good electron‐transporting material for use in a light‐emitting‐diode device.

The cyclic voltammogram of the novel poly(p‐phenylene vinylene) (PPV)/poly(p‐phenylene ethynylene) (PPE) block‐copolymer synthesized here.     

New crystalline polymers: poly(2,5‐dialkyl‐1,4‐phenylene oxide)s

New heat‐reversibly crystalline poly‐(alkylated phenylene oxide)s are described. the oxidative polymerization of 2,5‐dimethylphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane) copper dichloride produced poly(2,5‐dimethyl‐1,4‐phenylene oxide), which showed heat‐reversible crystallinity with a high melting point at ca. 300°C, although the isomeric polymer, poly(2,6‐dimethyl‐1,4‐phenylene oxide), never recrystallizes once melted. The polymerization of 2,5‐diethylphenol and 2,5‐dipropylphenol gave the polymers consisting of 1,4‐phenylene oxide units; the latter polymer possessed heat‐reversible crystallinity, however, the former one did not.     

Block copolymers of telechelic poly(phenylene sulfide) and semiaromatic thermotropic liquid crystalline polyester segments

We report the synthesis and characterization of copolymers comprising poly(phenyl sulfide) (PPS) blocks and semiaromatic thermotropic liquid crystalline polymer (TLCP) blocks. The copolymers, synthesized by melt-transesterification of dicarboxy-terminated poly(phenylene sulfide) with poly(ethylene terephthalate-co-oxybenzoate) (PET/OB), were characterized using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and polarized light optical microscopy (PLOM). The crystallizability and liquid crystalline properties of the copolymers are greatly influenced by the extent of interchange reactions, the mole percent of oxybenzoate with respect to the PET, the PPS : PET/OB weight ratio, and the reaction time. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2707–2713, 1998     

Heat capacity and thermodynamic functions of crystalline poly(p‐phenylenebenzobisoxazole), the synthetic polymer with the highest Young's modulus

The heat capacity of crystalline poly(p‐phenylenebenzobisoxazole) was measured below room temperature by adiabatic calorimetry. The standard thermodynamic functions (enthalpy, entropy, and Gibbs energy) were established and tabulated. The temperature dependence of the heat capacity was compared with those of polyethylene and poly(p‐phenylene), with attention paid to the low dimensionality of the systems. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1584–1588, 2000     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Studies on the thermotropic liquid crystalline polymer. VI. Synthesis and properties of homo- and co-poly(amide-azomethine-ether)

Two series of poly(amide-azomethine-ether)s and poly(ester-azomethine-ether)s were prepared by the condensation of dialdehydes with N,N'-bis(aminobenzamide)s and 4,4′-bis(p-aminophenyl)terephthalester, respectively. The thermotropic liquid crystalline properties were examined by DSC microscopic observations. Almost half of the synthesized polymers exhibit thermotropic liquid crystalline properties which are in the nematic phase since threaded and/or Schlieren textures are observed under polarizing microscope. The effects of the number of amide group and the nature of the nonlinear bibenzamide moiety, which link in the rigid segment, on the thermotropic liquid crystalline properties of the homo- and co-poly(amide-azomethine-ether)s were also investigated.     

Novel polypyromellitimides and their liquid crystal aligning properties

Various aromatic poly{3,6‐bis[(4‐n‐alkyloxy)phenyloxy]‐pyromellitimide}s [poly(Ar‐C_m‐PMDA)s, m = 1, 4, 8, 12] were prepared in film form by routine two‐step condensation of 3,6‐bis[(4‐n‐alkyloxy)phenyloxy]pyromellitic dianhydrides (C_m‐PMDAs) with various aromatic diamines. After characterization of their chemical structures their solution, thermal and liquid crystal (LC)‐aligning properties in terms of pretilt angle at various rubbing densities were measured and discussed with respect to their backbone structures. All polyimide films showed excellent thermal stability and homogeneous LC alignment, but the poly(p‐phenylene‐C₁₂‐PMDA) exhibited completely homeotropic alignment while the pretilt angle values of poly(p‐phenylene‐C₈‐PMDA) varied with varying rubbing density.     

Electronic Properties of Two Series of Blue-Emitting Conjugated Oligomers and Polymers Based on Cyanostilbene： A Quantum Chemistry Study

One of the drawbacks of the electroluminescence （EL） polymers is that they are usually much better at accepting and transporting holes than electrons due to their inherent richness of π-electrons. One approach improving electron injection and transport in conjugated polymers is to incorporate moieties with high electron affinities. In this theoretical work, to gain an insight into the chemical structure-property relationships was aimed by controllable modification of the main chain structures. Two cyanovinylene derivatives with 2,7-fluorenylene and p-phenylene moieties in the main chains, namely, poly { （2,5-dimethoxy-p-phenylene- 1,4-ylene）-alt-[ 1,2-bis（p-phenylene）- 1- cyanovinylene]} （PPhCN） and poly{[9,9-dimethyl-2,7-fluorenylene]-alt-[1,2-bis（p-phenylene）-1-cyanovinylene]} （PFCN）, were studied employing density functional theory （DFT） and time dependent density functional theory （TD-DFT） with B3LYP functional. The electronic properties of the neutral molecules, extrapolated ionization potentials （IP） and electron affinities （EA）, and energy gaps were investigated in comparison with pristine poly（2,7- fluorenylene）. From comparison with poly（2,7-fluorenylene） （PF）, the 1,2-bis（p-phenylene）-1-cyanovi-nylene unit was found to be a good electron-withdrawing moiety for electronic materials and the incorporation of 1,2-bis（p- phenylene）-1-cyanovinylene resulted in a narrow band gap and a red shift of both the absorption and photoluminescence emission peaks. Most importantly, the LUMO energies of PFCN are around 1 eV lower than those of PF, which results in the decrement of EA about 0.9 eV, indicating that the 1,2-bis（p-phenylene）-1-cyanovinylene unit has significantly improved the electron-accepting properties of the copolymer PFCN. Substitution of 2,5-dimethoxy-p-phenylene for 9,9-dimethyl-2,7-fluorenylene induced larger band gaps and thus a blue-shift in absorption and emission peaks, which can be attributed to the better conjugated backbone in PFCN.     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Density functional crystal orbital study of cyano‐substituted poly(para‐phenylene‐vinylene) and poly(quinoxaline‐vinylene)

We have calculated the optical and electronic properties of several conjugated organic polymers: poly(p‐phenylene‐vinylene) (PPV) and its derivatives. Cyano substitutions on the phenylene ring: poly(2,5‐dicyano‐p‐phenylene‐vinylene) (2,5‐DCN‐PPV) and on the vinylene linkage: poly(p‐phenylene‐7(,8)‐(di)cyano‐vinylene) are considered. In addition, poly(quinoxaline‐vinylene) (PQV) is studied. The infinite isolated quasi‐1D chains are treated with periodic boundary conditions, using atomic basis sets. In a comparative study of PPV, some issues regarding the selection of the functionals and basis sets are discussed and excitation energies derived from time‐dependent and from ordinary methods are compared. It is concluded that for these polymers the calculations are informative at the B3LYP/6‐31G** density functional theory (DFT) level. The absolute values might change with improved methods, but the similarity of the polymers suggests that the relative characterization is adequate. Band structures are communicated along with characteristics of the highest occupied and the lowest unoccupied crystal orbitals (HOCO and LUCO). Electron affinities, ionization potentials, valence and conduction bandwidths, and effective masses at the bandgap are given. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Synthesis and luminescence of yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐ alt‐(1,3‐phenylenevinylene)]s

Soluble yellow/orange‐emitting poly[tris(2,5‐dihexyloxy‐1,4‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)] derivatives ( 6 ) were synthesized and characterized. These polymers contained oligo(p‐phenylene vinylene) chromophores of equal conjugation length, which were jointed via a common m‐phenylene unit. An optical comparison of 6 and its model compound ( 8 ) at room temperature and low temperatures revealed the similarity in their absorption and fluorescence band structures. The vibronic band structure of 6 was assigned with the aid of the spectroscopic data for 8 at the low temperatures. 6 was electroluminescent and had an emission maximum wavelength at approximately 565 nm. With the device indium tin oxide/PEDOT/ 6 /Ca configuration, the polymer exhibited an external quantum efficiency as high as 0.25%. Simple substitution on m‐phenylene of 6 raised the electroluminescence output by a factor of about 10. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5853–5862, 2004     

Determination of percolation threshold electroactivity and phase behavior study on conducting blends of thermotropic polyesters and polyaniline

The new thermotropic polyester/polyaniline (PIn/PAni) blends have been prepared by solution blend of synthesized liquid crystalline poly[4,4′‐bis (ω‐alkoxy) biphenylisophthalate]s having four and six methylene units in spacer (PI4 and PI6) with PAni doped with camphorsolfonic acid (CSA). The percolation threshold electroactivity of prepared blend films has been determined by cyclic voltammetry. The effect of the PAni concentration, solvent nature and polyester structure on the electroactivity of the blends has been investigated. The extremely low percolation threshold of prepared PIn/PAni‐CSA blends from dimethylformamide (DMF) and m‐cresol solution was 3% weight of PAni‐CSA. The amount of conducting polymer necessary to retard the formation of the liquid crystalline (LC) phase is up to 45% by weight. Phase behavior studies by differential scanning calorimetry and polarizing microscopy show that blends with 45% of conducting polymer are both liquid crystal and conductive. The morphology of the blends has been investigated by scanning electron microscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

Preparation and emission properties of various poly(dimethylsilylenearylenevinylene)s: Effects of geometric structures and π units on their emission properties

trans‐Poly(dimethylsilylenearylenevinylene)s (trans‐rich) and cis‐poly(dimethylsilylenearylenevinylene)s (cis‐rich) containing phenylene, biphenylene, and phenylenesilylenephenylene units were prepared by hydrosilylation catalyzed with the RhI(PPh₃)₃ complex. The addition of a phenylene π unit to poly(silylenephenylenevinylene) expanded the conjugation in the main chain, whereas the insertion of a dimethylsilylene σ unit in the biphenylene moiety reduced the conjugation. UV spectra of the trans‐type polymers showed redshifts and hyperchromic effects with respect to those of the cis‐type polymers, indicating wider conjugation, and the quantum yields of emission of the former polymers were much higher than those of the latter polymers. The quantum yield of the trans‐rich polymer with the biphenylene moiety reached 0.15, which was about 10² times as large as those of trans‐type polymers with phenylene (3.4 × 10^?3) and phenylenesilylenephenylene (1.9 × 10^?3) moieties. The effects of the geometric structure and π unit on the absorption and emission properties of these polymers were examined with molecular orbital methods. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 535–543, 2002; DOI 10.1002/pola.10139     

Novel route to poly(p‐phenylene vinylene) polymers

Poly(p‐phenylene vinylene) (PPV), poly(2,5‐dioctyl‐p‐phenylene vinylene) (PDOPPV), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylene vinylene] (MEHPPV) were synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran containing 1,4‐bis(bromomethyl)benzene, 1,4‐bis(chloromethyl)‐2,5‐dioctylbenzene, or 1,4‐bis(chloromethyl)‐2‐methoxyl‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 2 mm. The experimental results demonstrated that the reaction conversions of PPV and PDOPPV were fairly high (～65%), but the conversion of MEHPPV was only 45%. Moreover, gelation was found in the polymerization processes. As a result, PPV was insoluble and PDOPPV and MEHPPV were partially soluble in the usual organic solvents, such as tetrahydrofuran and chloroform. Soluble PDOPPV and MEHPPV were obtained with chloromethylbenzene or bromomethylbenzene as a retardant regent. The molar mass of soluble PDOPPV was measured to be 2 × 10⁴ g mol^?1, and that of MEHPPV was 6 × 10⁴ g mol^?1. A thin, compact film of MEHPPV was formed via spin coating, and it emitted a yellow light. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 449–455, 2003