Chemistry of a family of semiquinone monochelates of carbonyl ruthenium(II) generated by reacting quinones with hydridic species

The reactions of [Ru(H)(Cl)(CO)(PPh₃)₃] with 3,5-di-tert-butyl-o-benzoquinone (dbq) and 3,4,5,6-tetrachloro-o-benzoquinone (tcq) have afforded the corresponding semiquinone complexes [Ru^II(dbsq)(Cl)(CO)(PPh₃)₂] and [Ru^II(tcsq)(Cl)(CO)(PPh₃)₂], respectively. The reaction of [Ru(H)₂(CO)(PPh₃)₃] with tcq has furnished [Ru^II(tcsq)(H)(CO)(PPh₃)₂]. Structure determination of [Ru(dbsq)(Cl)(CO)(PPh₃)₂] has revealed that it is a model semiquinonoid chelate with two equal C---O lengths ( 1.291(6) and 1.296(6) Å). The complexes are one-electron paramagnetic (1.85μ_B) and their EPR spectra in fluid media display a triplet structure (g2.00) due to superhyperfine coupling with two trans-³¹P atoms (A_iso17 G). The stretching frequency of the CO ligand increases by 20 cm⁻¹ in going from [Ru(dbsq)(Cl)(CO)(PPh₃)₂] to [Ru(tcsq)(Cl)(CO)(PPh₃)₂] consistent with electron withdrawal by chloro substituents. For the same reason the E_1/2 values of the cyclic voltammetric quinone/semiquinone and semiquinone/catechol couples undergo a shift of 500 mV to higher potentials between [Ru(dbsq)(Cl)(CO)(PPh₃)₂] and [Ru(tcsq)(Cl)(CO)(PPh₃)₂].     

Reaction of alkenyl carbonyl ruthenium(II) complexes with t-butyl isocyanide. Synthesis of η1-acylruthenium(II) complexes by intramolecular CO insertion

Reaction of Ru(CO)Cl(CHCHR)(PPh₃)₂ or Ru(CO)Cl(CHCHR)(PPh₃)₂L (L = py, Me₂Hpz) with 1 equivalent of t-butyl isocyanide gives the alkenyl derivatives Ru(CO)Cl(CHCHR)(PPh₃)₂(t-BuNC). When an excess of isocyanide is used, further reaction results in intramolecular CO insertion to yield η¹-acyl complexes [Ru(COCHCHR) (t-BuNC)₃(PPh₃)₂]Cl. Related complexes were obtained from [Ru(CO)(CHCHR)(MeCN)₂(PPh₃)₂]PF₆ and an excess of isocyanide.     

New routes to carbonyl complexes of general formula [RuCl2(CO)(S)(PPh3)2] (S = DMA,DMF, DMSO): crystal structure of [RuCl2(CO)(DMA)(PPh3)2] · 1/2CH2Cl2

The compound [RuCl₂(CO)(DMA)(PPh₃)₂] [DMA = dimethylacetamide] was obtained from [RuCl₃(PPh₃)₂-(DMA)] · DMA and CO in DMA. Orange crystals of [RuCl₂(CO)(DMA)(PPh₃)₂] · 1/2CH₂Cl₂ were isolated by slow evaporation of a CH₂Cl₂/DMA solution and its structure was determined by single crystal X-ray diffraction. The analogous compounds containing DMF and DMSO were obtained from the precursor ttt-[RuCl₂(CO)₂(PPh₃)₂]. Characterization of the other complexes is based on i.r. and n.m.r. spectroscopy, including ³¹P{¹H} data.     

Synthesis of organometallic hydrotris(pyrazol-1-yl)boratoruthenium(II) complexes

The reactions of K[HB(pz)₃] (pz = pyrazol-1-yl) with the coordinatively unsaturated σ-vinyl complexes [Ru(CRCHR)Cl(CO)(PPh₃)₂] (R = H, Me, C₆H₅) proceed with loss of a chloride and a phosphine ligand to provide the compounds [Ru(CRCHR)(CO)(PPh₃){HB(pz)₃}] in high yield. Similar treatment of the complex [Ru(C₆H₄Me-4)Cl(CO)(PPh₃)₂] leads to the related σ-aryl derivative [Ru(C₆H₄Me-4)(CO)(PPh₃){HB(pz)₃}] whilst the complex [RuClH(CO)(PPh₃)₃] treated successively with diphenylbutadiyne and K[HB(pz)₃] provides the unusual derivative [Ru{C(CCPh)CHPh}(CO)(PPh₃){HB(pz)₃}].     

Synthesis and characterization of transition metal complexes of a new bidentate ligand {2-(diphenylphosphino)ethyl}benzylamine

A new bidentate ligand {2-(diphenylphosphino)ethyl}benzylamine(DPEBA) was synthesized and characterized based on the IR, mass and ¹H, ¹³C and ³¹P NMR spectra. Various complexes of platinum group metal ions and Ni(II) and Co(II) ions with the ligand were synthesized. Reaction of RuCl₂(PPh₃)₃ or RuCl₂(Me₂SO)₄ with the ligand DPEBA, resulted in formation of a penta-coordinate, Ru(II) species of the composition [RuCl(DPEBA)₂]Cl. Carbonylation of [RuCl(DPEBA)₂]Cl gave an octahedral carbonyl complex of the type [RuCl(CO)(DPEBA)₂]Cl. The reaction of RuCl₃·3H₂O or RuCl₃(AsPh₃)₂MeOH with a twofold excess of the ligand gave an octahedral Ru(III) cationic species [Ru(DPEBA)₂Cl₂]Cl. Carbonylation of the Ru(III) complex gave rise to a carbonyl complex [RuCl(CO)(DPEBA)₂]Cl₂. The ligand DPEBA reacts with cobalt(II) chloride in methanol to give the 1 : 1 complex [Co(DPEBA)Cl₂]. A series of Rh(I) complexes [Rh(DPEBA)₂Cl], [ RhCl(CO)(DPEBA)] and [Rh(DPEBA)₂]Cl were synthesized by the reaction of DPEBA with RhCl(PPh₃)₃, RhCl(CO)(PPh₃)₂ and [Rh(COD)Cl]₂, respectively. Reaction of [Ir(COD)Cl]₂ and IrCl(CO)(PPh₃)₂ with the ligand DPEBA, gave the square-planar complexes [Ir(DPBA)₂]Cl and [Ir(DPEBA)(CO)Cl], respectively. Octahedral cationic complexes of the type [M(DPEBA)₂Cl₂]Cl (M = Rh(III), Ir(III)) were synthesized by the reaction of the ligand DPEBA and rhodium and iridium trichlorides. Reaction of NiCl₂·6H₂O with DPEBA in 1 : 2 molar equivalents, in boiling butanol gave an octahedral neutral complex [Ni(DPEBA)₂Cl₂] which readily rearranges to the square-planar complex [Ni(DPEBA)₂]Cl₂ in methanol. Reaction of Pd(II) and Pt(II) chlorides with DPEBA gave square-planar, cationic complexes of the type [M(DPEBA)₂Cl]Cl (M = Pd, Pt). All the complexes were characterized on the basis of their analytical and spectral data.     

Ruthenium complexes containing group 5b donor ligands : Part VII. Rearrangement reactions of some ruthenium (II) complexes containing triphenylphosphine,tri-p-tolylphosphine or ethyldiphenylphosphine ligands.

As for [RuCl₂(PPh₃₃], carbonylation of [RuCl₂(PR₃)₃] [PR₃ = P(p-tolyl)₃, PEtPh₂) in N,N ¹-dimethylformamide (dmf) gives [Ru(CO)Cl₂ (dmf) (PR₃)₂] (II). For PR₃ = PEtPh₂, rearrangement of (II) in various solvents gives inseparable mixtures (³¹P evidence) but for PR₃ = P(p-tolyl)₃ [Ru₂(CO)₂Cl₄-{P(p-tolyl)₃}₃]is obtained. Reaction of [Ru(CO)Cl₂ (dmf) - {P(p-tolyl)₃}₂] with [RuCI₂{(P(p-tolyl)₃}₃] (1:1 mol ratio) gives [Ru₂ (CO) Cl₄ {P (p-tolyl)₃}₄] whereas reaction of [Ru (CO) Cl₂ (dmf) - (PPh₃₂] with (Rul₂ {P (p-tolyl)₃}₃] gives [Ru₂(CO)Cl₄ (PPh₃)₂] - {P(p-tolyl)₃}₂] - Reaction of [RuCl₂ {P(p-tolyl)₃}₃] with CS₂ gives the related [Ru₂Cl₄(CS) {P(p-tolyl)₃}₄] and [{RuCl₂(CS)}P(p-tolyl)₃{₂}₂] whereas [RuCl₂(PEtPh₂)₃] and CS₂ produce [RuCl₂(S₂CPEtPh₂) (PEtPh₂)₂]CS₂ and [Ru₂Cl₄(CS)₂(PEtph₂)₃].     

Synthesis,Structures, and Reactivities of Pincer‐Type Ruthenium Complexes Bearing Two Proton‐Responsive Pyrazole Arms

A new metal–ligand bifunctional, pincer‐type ruthenium complex [RuCl( L1‐H2 )(PPh₃)₂]Cl ( 1 ; L1‐H2 =2,6‐bis(5‐tert‐butyl‐1H‐pyrazol‐3‐yl)pyridine) featuring two proton‐delivering pyrazole arms has been synthesized. Complex 1 , derived from [RuCl₂(PPh₃)₃] with L1‐H2 , underwent reversible deprotonation with potassium carbonate to afford the pyrazolato–pyrazole complex [RuCl(L1‐H)(PPh₃)₂] ( 2 ). Further deprotonation of 1 and 2 with potassium hexamethyldisilazide in methanol resulted in the formation of the bis(pyrazolato) complex [Ru(L1)(MeOH)(PPh₃)₂] ( 3 ). Complex 3 smoothly reacted with dioxygen and dinitrogen to give the side‐on peroxo complex [Ru(L1)(O₂)(PPh₃)₂] ( 4 ) and end‐on dinitrogen complex [Ru(L1)(N₂)(PPh₃)₂] ( 5 ), respectively. On the other hand, the reaction of [RuCl₂(PPh₃)₃] with less hindered 2,6‐di(1H‐pyrazol‐3‐yl)pyridine ( L3‐H2 ) led to the formation of the dinuclear complex [{RuCl₂(PPh₃)₂}₂(μ₂‐ L3‐H2 )₂] ( 6 ), in which the pyrazole‐based ligand adopted a tautomeric form different from L1‐H2 in 1 and the central pyridine remained uncoordinated. The detailed structures of 1 , 2 , 3 , 3.MeOH , 4 , 5 , 6 were determined by X‐ray crystallography.     

Synthesis and structures of two ruthenium dibenzoylmethane triphenylphosphine mixed ligand complexes

The reaction of dibenzoylmethane (HDBM) with [RuCl₂(PPh₃)₃] in benzene in the presence of a supporting base (Et₃N) under reflux gives two different complexes, the side product as a green-yellow Ru(III) compound of composition [Ru^IIICl₂(DBM)(PPh₃)₂] (2) and the main product as a red Ru(II) complex of composition [Ru^II(DBM)₂(PPh₃)₂] (3). The products were studied by spectroscopic methods, cyclic voltammetry and X-ray single crystal diffraction. The molecular structure of 2 shows a distorted octahedral environment around the Ru atom with two phosphine ligands in trans positions. The octahedral complex 3 shows a cis arrangement of two phosphine ligands.     

Coordination,oligomerisation and transfer hydrogenation of acetylenes by some ruthenium and osmium carboxylates: Crystal and molecular structures of bis(trifluoroacetato)carbonyl-(methanol) bis(triphenylphosphine)ruthenium(II) and (1,4-diphenylbut-1-en-3-yn-2-yl)trifluoroacetato-(carbonyl) bis(triphenylphosphine)ruthenium(II)

The hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] (M = Ru or Os) react with disubstituted acetylenes PhCCPh and PhCCMe to afford vinylic products [M{C(Ph)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] and [M{C(Ph)CHMe}(O₂CCF₃)(CO) (PPh₃)₂]/[M{C(Me)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] respectively. Acidolysis of these products with trifluoroacetic acid in cold ethanol liberates cis-stilbene and cis-PhHCCHMe respectively thus establishing the cis-stereochemistry of the vinylic ligands. The complexes [M(O₂CCF₃)₂(CO)(PPh₃)₂] formed during the acidolysis step undergo facile alcoholysis followed by β-elimination of aldehyde to regenerate the parent hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] and thereby complete a catalytic cycle for the transfer hydrogenation of acetylenes. The molecular structure of the methanol-adduct intermediate, [Ru(O₂CCF₃)₂(MeOH)(CO)(PPh₃)₂] has been determined by X-ray methods and shows that the coordinated methanol is involved in H-bonding with the monodentate trifluoroacetate ligand [MEO-H---OC(O)CF₃; O...O = 2.54 Å]. The hydrides [MH(O₂CCF₃)(CO) (PPh₃)₂]react with 1,4-diphenylbutadiyne to afford the complexes [M{C(CCPh)CHPh} (O₂CCF₃)(CO)(PPh₃)₂]. The ruthenium product, which has also been obtained by treatment of [RuH(O₂CCF₃)(CO)(PPh₃)₂] with phenylacetylene, has been shown by X-ray diffraction methods to contain a 1,4-diphenylbut-1-en-3-yn-2-yl ligand. The osmium complexes [Os(O₂CCF₃)₂(CO)(PPh₃)₂], [OsH(O₂CCF₃)(CO)(PPh₃)₂] and [Os{C(CCPh)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] all serve as catalysts for the oligomerisation of phenylacetylene. Acetylene reacts with [Ru(O₂CCF₃)₂(CO)(PPh₃)₂] in ethanol to afford the vinyl complex [Ru(CHCH₂)(O₂CCF₃)(CO)(PPh₃)₂].     

Dihapto-acyl derivatives of ruthenium(II). Preparation and structure of Ru[η2-C(O)CH3] I(CO)(PPh3)2 and Ru[η2-C(O)p-tolyl]I(C0) (PPh3) 2

Reaction between Ru(CO)₂(PPh₃)₃ and MeHgI yields Ru[η²-C(O)CH₃]I(CO)(PPh₃)₂ which in solution exists mainly as RuCH₃I(CO)₂(PPh₃)₂ and crystal structure determination of Ru[η²-C(O)CH₃]I(CO)(PPh₃)₂ and previously described Ru[η²-C(O)p-tolyl]I(CO) (PPh₃)₂ confirms that in the solid state both molecules contain dihapto-acyl ligands.     

A SIMPLE ROUTE FOR SYNTHESES OF TRIHALIDE-BRIDGED CARBONYL DIRUTHENIUM(II,III) COMPLEXES: CRYSTAL AND MOLECULAR STRUCTURE OF ttt-[RuIICl2(CO)2(PPh3)2],[(CO)(AsPh3)2RuII(μ-Cl3)RuIIICl2(AsPh3)] AND ([CO)(PPh3)2RuII(μ-Br3)RuIIIBr2(PPh3)], SPECTROSCOPIES,ELECTROCHEMISTRY AND PROPERTIES

Abstract

The triply halide-bridged binuclear complexes [Ru₂Cl₅(CO)(AsPh₃)₃] (AsPh₃ = triphenylarsine), [Ru₂Cl₅(CO)(PPh₃)₂(AsPh₃)] (PPh₃ = triphenylphosphine), [Ru₂Cl₅(CO)(AsPh₃)₂(PPh₃)], [Ru₂ Br₅(CO)(PPh₃)₃], [Ru₂Cl₅(CO)(P{p-tol}₃)₂(PPh₃)] (P{p-tol}₃ = tri-p-tolylphosphine) and [Ru₂ Br₂Cl₃(PPh₃)₂(AsPh₃)] were prepared from the precursor compounds ttt-[RuX₂(CO)₂(P)₂] (X = Cl or Br) and [RuY₃(P')₂S]·S (Y = Cl or Br; P=PPh₃, AsPh₃ or P{p- tol}₃ and P' = AsPh₃ or PPh₃; S=DMA or MeOH, where DMA = N,N'-dimethylacetamide). The molecular structures of the binuclear complexes [Ru₂Cl₅(CO)(AsPh₃)₃] (P2_1/c), [Ru₂Br₅(CO)(PPh₃)₃] (P2_1/c) and ttt-[RuCl₂(CO)₂(PPh₃)₂] (P1) were determined by X-ray diffraction methods. The complexes are always formed by two Ru atoms bridged through three halide anions, two of which are × type (from the Ru^II precursor) and the other is Y type (from the ruthenium^III precursor) confirming our previously suggested mechanism for obtaining this class of complexes. The Ru^II atom is also coordinated to a carbon monoxide molecule and two P ligands from the ttt-starting isomer whereas the Ru^III atom is bonded to two non-bridging Y halides and one P' molecule. The presence of Ru^III was confirmed by EPR data, a technique that was also useful to suggest the symmetry of the complexes. The absence of intervalence charge-transfer transitions (IT) in the near infrared spectrum confirms that the binuclear complexes have localized valence. The IR spectra of the complexes show; (CO) bands close to 1970 cm^?1 and ν(Ru-Cl) or(Ru-Br) bands at about 230–380 cm^?1 corresponding to halides at terminal or bridged positions. Two widely separated redox processes, Ru^II/Ru^II←Ru^II/Ru^III→Ru^III/Ru^III, were observed by cyclic voltammetry and differential pulse voltammetry.     

Synthesis and spectroscopic studies of some new metal carbonyl derivatives of 1-(2-pyridylazo)-2-naphthol

Interaction of 1-(2-pyridylazo)-2-naphthol (PAN) with [Mo(CO)₆] in air resulted in formation of the tricarbonyl oxo-complex [Mo(O)(CO)₃(PAN)], 1. The dicarbonyl complex [Ru(CO)₂(PAN)], 3, was obtained from the reaction of [Ru₃(CO)₁₂] with PAN. In presence of triphenyl phosphine (PPh₃), the reaction of PAN with either Mo(CO)₆ or Ru₃(CO)₁₂ gave [Mo(CO)₃(PAN)(PPh₃)], 2, and [Ru(CO)₂(PAN)(PPh₃)], 4. All the complexes were characterized by elemental analysis, mass spectrometry, IR, and NMR spectroscopy. The thermal properties of the complexes were also investigated by thermogravimetry.     

Synthesis of low-valent thiocarbonyl complexes via 1,2-elimination of methylthiol from cis-metal-hydrido-dithiomethylester complexes. Os(cs)(CO)2(PPh3)2 and IrCl(CS)(PPh3)2.

[OS(η²-CS₂Me)(CO)₂(PPH₃)₂]⁺ and [Ir(η²-CS₂Me)Cl(CO)(PPh₃)₂)⁺ react with NaBH₄ giving OsH(CS₂Me)(CO)₂(PPh₃)₂ and IrH(CS₂Me)Cl(CO)(PPh₃)₂ respectively; These compounds contain mutually $\text{cis}$ hydride and η¹-dithiomethylester ligands and upon heating undergo 1,2-elimination of MeSH producing Os(CS)(CO)₂(PPh₃)₂ and IrCl(CS)(PPh₃)₂.     

Reactions of trans-[RuCl2(CO)2(PEt3)2] with 1,1-dithiolates: Stepwise formation of cis-[Ru(CO)(PEt3)(S2X)] (X = CNMe2, CNEt2, COEt,P(OEt)2, PPh2)

Trans-[RuCl₂(CO)₂(PEt₃)₂] reacts with two equivalents of a series of 1,1-dithiolate ligands to form the bis(dithiolate) complexes, cis-[Ru(CO)(PEt₃)(S₂X)₂] (X = CNMe₂, CNEt₂, COEt, P(OEt)₂, PPh₂). Two intermediates have been isolated; trans-[Ru(PEt₃)₂Cl(CO){S₂P(OEt)₂}] and trans-[Ru(PEt₃)₂(CO)(η¹-S₂COEt)(η²-S₂COEt)], allowing a simple reaction scheme to be postulated involving three steps; (i) initial replacement of cis carbonyl and chloride ligands, (ii) substitution of the second chloride, (iii) loss of a phosphine. Thermolysis of cis-[Ru(CO)(PEt₃)(S₂CNMe₂)₂] with Ru₃(CO)₁₂ in xylene affords trinuclear [Ru₃(μ₃-S)₂(PEt₃)(CO)₈] as a result of dithiocarbamate degradation. Crystal structures of cis-[Ru(CO)(PEt₃)(S₂X)₂] (X = NMe₂, COEt), trans-[Ru(PEt₃)₂Cl(CO){S₂P(OEt)₂}], trans-[Ru(PEt₃)₂(CO)(η¹-S₂COEt)(η²-S₂COEt)] and [Ru₃(μ₃-S)₂(PEt₃)(CO)₈] are reported.     

Platinum,iridium and rhodium complexes with substituted bis-(diphenylphosphino)methane ligands Ph2PCH(R)PPh2 (R = Me,Ph or SiMe3)

Substituted phosphines of the type Ph₂PCH(R)PPh₂ and their Pt^II complexes [PtX₂{Ph₂PCH(R)PPh₂}] (R = Me, Ph or SiMe₃; X = halide) were prepared. Treatment of [PtCl₂(NCBu^t)₂] with Ph₂PCH(SiMe₃)-PPh₂ gave [PtCl₂(Ph₂PCH₂PPh₂)], while treatment with Ph₂PCH(Ph)PPh₂ gave [Pt{Ph₂PCH(Ph)PPh₂}₂]Cl₂. Reaction of p-MeC₆H₄C≡CLi or PhC≡CLi with [PtX₂{Ph₂PCH(Me)PPh₂}] gave [Pt(C≡CC₆H₄Me-p)₂-{Ph₂PCH(Me)PPh₂}] (X = I) and [Pt{Ph₂PC(Me)PPh₂}₂](X = Cl),while reaction of p-MeC₆H₄C≡CLi with [Pt{Ph₂PCH(Ph)PPh₂}₂]Cl₂ gave [Pt{Ph₂PC(Ph)PPh₂}₂]. The platinum complexes [PtMe₂(dpmMe)] or [Pt(CH₂)₄(dpmMe)] fail to undergo ring-opening on treatment with one equivalent of dpmMe [dpmMe = Ph₂PCH(Me)PPh₂]. Treatment of [Ir(CO)Cl(PPh₃)₂] with two equivalents of dpmMe gave [Ir(CO)(dpmMe)₂]Cl. The PF₆ salt was also prepared. Treatment of [Ir(CO)(dpmMe)₂]Cl with [Cu(C≡CPh)₂], [AgCl(PPh₃)] or [AuCl(PPh₃)] failed to give heterobimetallic complexes. Attempts to prepare the dinuclear rhodium complex [Rh₂(CO)₃(μ-Cl)(dpmMe)₂]BPh₄ using a procedure similar to that employed for an analogous dpm (dpm = Ph₂PCH₂PPh₂) complex were unsuccessful. Instead, the mononuclear complex [Rh(CO)(dpmMe)₂]BPh₄ was obtained. The corresponding chloride and PF₆ salts were also prepared. Attempts to prepare [Rh(CO)(dpmMe)₂]Cl in CHCl₃ gave [RhHCl(dpmMe)₂]Cl. Recrystallization of [Rh(CO)(dpmMe)₂]BPh₄ from CHCl₃/EtOH gave [RhO₂(dpmMe)₂]BPh₄. Treatment of [Rh(CO)₂Cl₂]₂ with one equivalent of dpmMe per Rh atom gave two compounds, [Rh(CO)(dpmMe)₂]Cl and a dinuclear complex that undergoes exchange at room temperature between two formulae: [Rh₂(CO)₂(μ-Cl)(μ-CO)(dpmMe)₂]Cl and [Rh₂(CO)₂-(μ-Cl)(dpmMe)₂]Cl. This revised version was published online in June 2006 with corrections to the Cover Date.     

Diphenylphosphine and diphenylphosphido derivatives of [Ru3(μ-H)(μ3-ampy)(CO)9] (Hampy = 2-amino-6-methylpyridine)

The reactions of [Ru₃(μ-H)(μ-ampy)(CO)₉] (1) (Hampy = 2-amino-6-methylpyridine) with one or two equivalents of PPh₂H lead to the complexes [Ru₃(μ-H)(μ₃-ampy)(CO)₈(PPh₂H)] (2) or [Ru₃(μ-H)(μ₃-ampy)(CO)₇(PPh₂H)₂] (3), in which the PPh₂H ligands are cis to the bridging NH fragment and cis to the hydride. Complex 2 can be transformed in refluxing THF into the phosphido-bridged derivative [Ru₃(μ₃-ampy)(μ-PPh₂)(μ-CO)₂(CO)₆] (4), which contains the PPh₂ ligand spanning one of the two RuRu edges unbridged by the amido moiety, and presents an extremely high ³¹P chemical shift of 386.9 ppm. Under similar conditions, complex 3 gives a mixture of two isomers of [Ru₃(μ-H)(μ₃-ampy)(μ-PPh₂)₂(CO)₆] in a 5:1 ratio; the major product (5) has a plane of symmetry, whereas the minor one (6) is asymmetric.     

The preparation and X-ray crystal structure of [Ru(SC6F52{P(C6H5)2(H4C6H-2)}2]

The complex [Ru(SC₆F₅)₂(PPh₃)₂] has been prepared from [RuCl₂(PPh₃)₃] and [Pb(SC₆F₅)₂] and shown by X-rays to have a pseudo-octahedral structure apparently with two RuHC interactions. It reacts with CO to give [Ru(SC₆F₅)₂-(CO)₂(PPh₃)₂].     

Derivate des borols: IX. (η5-borol)metall-komplexe von ruthenium,osmium und rhodium

Dehydrogenating complexation of borolenes with carbonyls (Ru₃(CO)₁₂, Os₃(CO)₁₂), Wilkinson's catalyst (RhCl(PPh₃)₃) and related compounds (RuCl₂(PPh₃)₃, RuHCl(PPh₃)₃, OSCl₂(PPh₃)₃), and (η⁶-arene)ruthenium complexes (Ru(η-C₆H₆)(η⁴-C₆H₈), [Ru(η-C₆H₆)Cl₂]₂, [Ru(η-C₆-Me₆)Cl₂]₂) leads to the (η⁵-borole)metal complexes of Ru, Os, and Rh. Inter alia, the preparation of the complexes Ru(CO)₃(η⁵-C₄H₄BF) (R = Ph, OMe, Me), Os(CO)₃L (L = η⁵-C₄H₄BPh), MHClL(PPh₃)₂ (M = Ru, Os), RhClL(PPh₃)₂, and RuL(η-C₆R₆) (R = H, Me) is described. The structures of RuHClL(PPh₃)₂ and RhClL(PPh₃)₂ have been determined by X-ray diffraction analysis.     

Synthese,Struktur und Photolyse von Isocyanatokomplexen des Rheniums

Synthesis, Structure, and Photolysis of Isocyanato Complexes of Rhenium The Re^III isocyanato complex Re(NCO)₃(PMe₂Ph)₃ yields from the reaction of ReCl₃(PMe₂Ph)₃ with an excess of NaOCN in EtOH. It crystallizes in the triclinic space group P 1 with a = 991.8(6), b = 1180.7(6), c = 1348.8(5) pm, α = 89.85(1)°, β = 94.12(1), γ = 111.56(1)°, Z = 2. In the mononuclear complex with an octahedral coordination of the Re atoms the phosphine and isocyanato ligands exhibit a meridional arrangement. By using a deficient amount of NaOCN the mono isocyanato complex Re(NCO)Cl₂(PMe₂Ph)₃ is formed, and part of the educt is transformed to its isomer [(Me₂PhP)₃Re(μ-Cl)₃Re(PMe₂Ph)₃]Cl₃. The mono isocyanato complex forms monoclinic crystals with the space group P2₁/n and a = 1467.5(7), b = 1310.6(7), c = 1603.2(8) pm, β = 112.08(1)°, Z = 4. The isocyanato ligand is in trans position to a Cl atom, and the phosphine ligands are coordinated in a meridional arrangement. [(Me₂PhP)₃Re(μ-Cl)₃Re(PMe₂Ph)₃]Cl₃ · 2 EtOH crystallizes in the hexagonal space group P6₃/m with a = 1332.6(2), c = 2300.1(7) pm, Z = 2. The dinuclear complex cation occupies with its center a special position with the symmetry C_3h. Photolysis of Re(NCO)Cl₂(PMe₂Ph)₃ results in the cleavage of the isocyanato ligand with release of CO and formation of the nitrido complex ReNCl₂(PMe₂Ph)₃. The reaction of ReNCl₂(PMe₂Ph)₃ with NaOCN affords the complex ReN(NCO)₂(PMe₂Ph)₃. It crystallizes in the space group P2₁/n with a = 943.0(3), b = 2635.2(4), c = 1212.6(5) pm, β = 109.88(1)°, Z = 4. In this nitrido complex, like in the educt, the phosphine ligands form a meridional arrangement. The nitrido ligand is in trans position to an isocyanato group. The distance Re≡N is 165.9(6) pm.     

Synthesis and structural characterization of ruthenium complexes with 1-aryl-imidazole-2-thione

Treatment of [RuCl₂(PPh₃)₃] with 2 equiv. Himt^MPh (Himt^MPh?=?1-(4-methyl-phenyl)-imidazole-2-thione) in the presence of MeONa afforded cis-[Ru(κ ²-S,N-imt^MPh)₂(PPh₃)₂] (1), while interaction of [RuCl₂(PPh₃)₃] and 2 equiv. Himt^MPh in tetrahydrofuran (THF) without base gave [RuCl₂(κ ¹-S-Himt^MPh)₂(PPh₃)₂] (2). Treatment of [RuHCl(CO)(PPh₃)₃] with 1 equiv. Himt^MPh in THF gave [RuHCl(κ ¹-S-Himt^MPh)(CO)(PPh₃)₂] (3), whereas reaction of [RuHCl(CO)(PPh₃)₃] with 1 equiv. of the deprotonated [imt^MPh]^? or [imt^NPh]^? (imt^NPh?=?1-(4-nitro-phenyl)-2-mercaptoimidazolyl) gave [RuH(κ ²-S,N-imt^RPh)(CO)(PPh₃)₂] (R?=?M 4a, R?=?N 4b). The ruthenium hydride complexes 4a and 4b easily convert to their corresponding ruthenium chloride complexes [RuCl(κ ²-S,N-imt^MPh)(CO)(PPh₃)₂] (5a) and [RuCl(κ ²-S,N-imt^NPh)(CO)(PPh₃)₂] (5b), respectively, in refluxing CHCl₃ by chloride substitution of the RuH. Photolysis of 5a in CHCl₃ at room temperature afforded an oxidized product [RuCl₂(κ ²-S,N-imt^MPh)(PPh₃)₂] (6). Reaction of 6 with excess [imt^MPh]^? afforded 1. The molecular structures of 1·EtOH, 3·C₆H₁₄, 4b·0.25CH₃COCH₃, and 6·2CH₂Cl₂ have been determined by single-crystal X-ray crystallography.