微接触印刷法构造金属银的二维和准三维微图纹结构

以聚二甲基硅氧烷（PDMS）有机硅橡胶为弹性印章，以十八烷基三氯硅烷（OTS）正已烷溶液为“墨水”，用微接触印刷分别在普通盖玻片表面和直径为20 mm的试管外表面直接盖印，以及在直径为10 mm的玻璃棒表面进行滚动式微接触印刷盖印.将这些盖好印的基材放在化学镀银液中进行选择性镀银沉积，得到金属银在平面上的二维微结构和在曲面上的准三维微结构.这些微结构的显微照片显示，采用微接触印刷法制备的微图纹结构，图纹转移效率高，精细度很好，特别是微接触印刷操作方法灵活多变，适用于多种形态的表面，是一类实用的微制造方法.     

Reversible Hydrophobic Barriers Introduced by Microcontact Printing: Application to Protein Microarrays

Microcontact printing (µCP) has been used to introduce temporary hydrophobic barriers on carboxymethylated dextran (CMD) hydrogels on gold. Among the investigated types of inks, tetraoctadecylammonium bromide (TOAB), electrostatically bound to the CMD layer, provided the most well-defined features both with respect to pattern-definition and reversibility upon exposure to a regeneration solution. The printed patterns were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), microscopic wetting and imaging null ellipsometry to explore the influence of concentration of ink solution and contact time on the appearance of the printed layer. AFM revealed that the printed TOAB molecules aggregated into clusters rather than into a homogeneous mono- or multilayer on the CMD hydrogel. It was also observed that printed areas of TOAB that are larger than 25µm are inhomogeneous most likely because of an edge transfer lithography (ETL) mechanism. A protein model system based on Protein A-rabbit antimouse Fc was used to evaluate the potential of the patterned surface as a protein microarray chip by means of surface plasmon microscopy (SPM). Moreover, non-specific adsorption of several proteins onto TOAB barriers was also studied using surface plasmon resonance (SPR), and it is evident that undesired adsorption can be eliminated by removing barriers after ligand immobilization, but prior to analyte exposure, by treating the patterned surface with a simple salt regeneration solution.     

微接触印刷法直接制备图案化TiO2薄膜

A novel process to gain clear and high edge acuity micropatterns of TiO2 thin films by direct microcontact printing was presented in this paper. Using TiO2 sol as the “ink”, poly (dimethylsiloxane) elastomeric stamp was taken to transfer the TiO2 colloids to the substrate. The process is different from the traditional process using the SAMS to induce the deposition of TiO2. The new way increases the transferred efficiency of the micropatterned TiO2 thin films. The optical micrographs and SEM show that the micropatterned structures of TiO2 were microscale and uniform over a large area as well.     

Fabrication of Micropatterned Gold Nanoparticle Arrays as a Template for Surface‐Initiated Polymerization of Stimuli‐Responsive Polymers

Summary: This paper demonstrates a new, reliable, and simple method for fabricating micropatterned nanoparticle arrays that can serve as templates for the surface‐initiated polymerization of polymer brushes. As a proof of concept, we micropatterned gold nanoparticles (Au‐NPs, ≈10 nm) onto glass, silicon, polystyrene, and gold surfaces by a simple three‐step process: (1) microcontact printing of soluble polymer, (2) incubation with a solution of Au‐NPs, and (3) lift‐off of the template in a mixture of ethanol and deionized water. 40 µm wide features were successfully fabricated without any significant defects or nonspecific adsorption on the background. To demonstrate the utility of these Au‐NP templates, we subsequently polymerized N‐isopropylacrylamide by surface‐initiated polymerization, using a surface‐bound initiator.

Synthesis of PNIPAAm brushes from micropatterned Au‐NP.     

Self‐Assembled Monolayers into the 21st Century: Recent Advances and Applications

The modification of an interface on a molecular level with more than one molecular ‘building block' is essentially an example of the ‘bottom–up' fabrication principle of nanotechnology. The fabrication of such integrated molecular systems in electrochemistry has seen rapid progress in recent years via the development of sensing interfaces fabricated using self‐assembled monolayers (SAMs). This review outlines recent advances and applications of self‐assembled monolayers for modifying electrodes with an emphasis on the development of integrated molecular systems. First, some basic issues regarding fabricating integrated molecular systems, such as the role of the surface topography of the electrode and patterning surfaces, are discussed. Subsequently an overview of recent developments in pH, inorganic and bio sensing involving the use of SAMs is given. Finally emerging trends in using molecular building blocks in the fabrication of integrated molecular systems, such as nanotubes, dendrimers and nanoparticles, are reviewed.     

Photochemical Reactions in Self‐Assembled Organic Monolayers Characterized by using Scanning Tunneling Microscopy

Research on the supramolecular self‐assembly behavior at interfaces is of great importance to improving the performance of nanodevices that are based on optical functional materials. In this Minireview, several photoinduced isomerization and polymerization reactions in self‐assembled organic monolayers on surfaces are discussed. Typical organic molecules contain azobenzene, alkynyl, or olefins groups. The feature surface base is a highly oriented pyrolytic graphite (HOPG) surface or a gold surface. Scanning tunneling microscopy (STM) is used as a strong tool to characterize new species’ structures before and after illumination.     

Intermixed Adatom and Surface‐Bound Adsorbates in Regular Self‐Assembled Monolayers of Racemic 2‐Butanethiol on Au(111)

In situ scanning tunneling microscopy combined with density functional theory molecular dynamics simulations reveal a complex structure for the self‐assembled monolayer (SAM) of racemic 2‐butanethiol on Au(111) in aqueous solution. Six adsorbate molecules occupy a (10×√3)R30° cell organized as two RSAuSR adatom‐bound motifs plus two RS species bound directly to face‐centered‐cubic and hexagonally close‐packed sites. This is the first time that these competing head‐group arrangements have been observed in the same ordered SAM. Such unusual packing is favored as it facilitates SAMs with anomalously high coverage (30 %), much larger than that for enantiomerically resolved 2‐butanethiol or secondary‐branched butanethiol (25 %) and near that for linear‐chain 1‐butanethiol (33 %).     

Bio‐Inspired Silicification on Patterned Surfaces Generated by Microcontact Printing and Layer‐by‐Layer Self‐Assembly

Micropatterns of silica were generated under biocompatible conditions by a combination of microcontact printing (μCP), layer‐by‐layer (LbL) self‐assembly, and biomimetic silicification. Quaternary amine‐containing poly(diallyl dimethyl ammonium chloride) induced polycondensation of silicic acid, resulting in spatioselective formation of silica micropatterns. Scale bar: 10 μm.

     

One‐Reactant Photografting of ATRP Initiators for Surface‐Initiated Polymerization

Self‐initiated photografting polymerization is used to couple the polymerizable initiator monomer 2‐(2‐chloropropanoyloxy)ethyl acrylate to a range of polymeric substrates. The technique requires only UV light to couple the initiator to surfaces. The initiator surface density can be varied by inclusion of a diluent monomer or via selection of initiator and irradiation parameters. The functionality of the initiator surface is demonstrated by subsequent surface‐initiated atom transfer radical polymerization. Surfaces are characterized by x‐ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM), and UV‐induced changes to the initiator are assessed by ¹H NMR and gel permeation chromatography (GPC). This is the first time this one‐reactant one‐step technique has been demonstrated for creating an initiator surface of variable density.

     

Self‐Assembled Monolayers of Alkoxy‐Substituted Octadehydrodibenzo[12]annulenes on a Graphite Surface: Attempts at peri‐Benzopolyacene Formation by On‐Surface Polymerization

Self‐assembled monolayers of a series of tetraalkoxy‐substituted octadehydrodibenzo[12]annulene (DBA) derivatives 1 c – g possessing butadiyne linkages were studied at the 1,2,4‐trichlorobenzene (TCB) or 1‐phenyloctane/graphite interface by scanning tunneling microscopy (STM). The purpose of this research is not only to investigate the structural variation of two‐dimensional (2D) monolayers, but also to assess a possibility for peri‐benzopolyacene formation by two‐dimensionally controlled polymerization on a surface. As a result, the formation of three structures, porous, linear, and lamella structures, were observed by changing the alkyl chain length and the solute concentration. The formation of multilayers of the lamella structure was often observed for all compounds. The selection of molecular networks is basically ascribed to intermolecular and molecule–substrate interactions per unit area and network density. The selective appearance of the linear structure of 1 d is attributed to favorable epitaxial registry matching between the substrate lattice and the overlayer lattice. Even though the closest interatomic distance between the diacetylenic units of the DBAs in the lamella structure (≈0.6 nm) is slightly larger compared to the typical distances necessary for topochemical polymerization, the reactivity toward external stimuli (electronic‐pulse irradiation from an STM tip and UV irradiation) was investigated. Unfortunately, no evidence for polymerization of the DBAs on the surface was observed. The present results indicate the necessity for further designing a suitable system for the on‐surface construction of structurally novel conjugated polymers, which are otherwise difficult to prepare.     

Reproducing Superhydrophobic Leaves as Coatings by Micromolding Surface‐Initiated Polymerization

Micromolding surface‐initiated polymerization enables the fabrication of polymer coatings that reproduce the microscale surface topography of superhydrophobic leaves onto solid supports. Here, the surfaces of superhydrophobic leaves from Trifolium repens and Aristolochia esperanzae are molded and reproduced as the topography of a partially fluorinated polymer coating through the surface‐initiated ring‐opening metathesis polymerization of 5‐(perfluorooctyl)norbornene (NBF8). The polymer coatings have thicknesses exceeding 100 μm, which can be tailored by the amount of monomer added to the mold. These coatings are robustly bound to the substrate, contain compositions not found in nature, and achieve superhydrophobicity that is comparable to the actual leaf.

     

Local Probe Oxidation of Self‐Assembled Monolayers: Templates for the Assembly of Functional Nanostructures

Surfaces with purposes : The electroinitiated patterning of self‐assembled monolayers enables the fabrication of a variety of complex nanostructures (see picture). The possibilities offered by the introduction of chemical selectivity through the local generation of chemically active groups and subsequent derivatization are reviewed, with a focus on progress in this area of research over the last four years.

     

Surface‐Enhanced Fluorescence from Fluorophore‐Assembled Monolayers by Using Ag@SiO2 Nanoparticles

A new and simple procedure to enhance the fluorescence of analytes on the surfaces of a solid substrate is demonstrated based on Ag@SiO₂ nanoparticles. Two kinds of silver–silica core–shell nanoparticles with shell thicknesses of around 3 and 15 nm have been prepared and used as enhancing agents, respectively. By simply pipetting drops of the enhancing agents onto substrate surfaces with Rose Bengal monolayers, an enhancement of about 27 times, compared with the control sample, is achieved by using the Ag@SiO₂ nanoparticles with shells of about 3 nm, whereas an enhancement of around 11.7 times is obtained when using those with thicker shells. The effects of shell thickness and surface density of the enhancing agents on the enhancement have been investigated experimentally. The results show that this method can be potentially helpful in fluorescence‐based surface analysis.     

Charge Transport through Self‐Assembled Monolayers of Monoterpenoids

The nature of the processes at the origin of life that selected specific classes of molecules for broad incorporation into cells is controversial. Among those classes selected were polyisoprenoids and their derivatives. This paper tests the hypothesis that polyisoprenoids were early contributors to membranes in part because they (or their derivatives) could facilitate charge transport by quantum tunneling. It measures charge transport across self‐assembled monolayers (SAMs) of carboxyl‐terminated monoterpenoids (O₂C(C₉HX)) and alkanoates (O₂C(C₇HX)) with different degrees of unsaturation, supported on silver (Ag^TS) bottom electrodes, with Ga₂O₃/EGaIn top electrodes. Measurements of current density of SAMs of linear length‐matched hydrocarbons—both saturated and unsaturated—show that completely unsaturated molecules transport charge faster than those that are completely saturated by approximately a factor of ten. This increase in relative rates of charge transport correlates with the number of carbon–carbon double bonds, but not with the extent of conjugation. These results suggest that polyisoprenoids—even fully unsaturated—are not sufficiently good tunneling conductors for their conductivity to have favored them as building blocks in the prebiotic world.