[Me3Si(CF3)F]− and [Me3Si(CF3)2]−: Reactive Intermediates in Fluoride-Initiated Trifluoromethylation with Me3SiCF3— An NMR Study

The long-postulated reactive intermediates of polar fluoride-inititated trifluoromethylations with Me₃SiCF₃ (see scheme) were identified by NMR spectroscopy as [Me₃Si(CF₃)F]⁻ and [Me₃Si(CF₃)₂]⁻_.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.     

M−C Bond Homolysis in Coinage‐Metal [M(CF3)4]− Derivatives

A comparative study of the homoleptic [M(CF₃)₄]^? complexes of all three coinage metals (M=Cu, Ag, Au) reveals that homolytic M?C bond cleavage is favoured in every case upon excitation in the gas phase (CID‐MS²). Homolysis also occurs in solution by photochemical excitation. Transfer of the photogenerated CF₃^. radicals to both aryl and alkyl carbon atoms was also confirmed. The observed behaviour was rationalized by considering the electronic structure of the involved species, which all show ligand‐field inversion. Moreover, the homolytic pathway constitutes experimental evidence for the marked covalent character of the M?C bond. The relative stability of these M?C bonds was evaluated by energy‐resolved mass spectrometry (ERMS) and follows the order Cu<Ag?Au. The qualitatively similar and rather uniform behaviour experimentally observed for all three coinage metals gives no ground to suggest variation in the metal oxidation state along the group.     

Easy Access to the Copper(III) Anion [Cu(CF3)4]−

CuCl or pre‐generated CuCF₃ reacts with CF₃SiMe₃/KF in DMF in air to give [Cu(CF₃)₄]^? quantitatively. [PPN]⁺, [Me₄N]⁺, [Bu₄N]⁺, [PhCH₂NEt₃]⁺, and [Ph₄P]⁺ salts of [Cu(CF₃)₄]^? were prepared and isolated spectroscopically and analytically pure in 82–99 % yield. X‐ray structures of the [PPN]⁺, [Me₄N]⁺, [Bu₄N]⁺, and [Ph₄P]⁺ salts were determined. A new synthetic strategy with [Cu(CF₃)₄]^? was demonstrated, involving the removal of one CF₃^? from the Cu atom in the presence of an incoming ligand. A novel Cu^III complex [(bpy)Cu(CF₃)₃] was thus prepared and fully characterized, including by single‐crystal X‐ray diffraction. The bpy complex is highly fluxional in solution, the barrier to degenerate isomerization being only 2.3 kcal mol^?1. An NPA study reveals a huge difference in the charge on the Cu atom in [Cu(CR₃)₄]^? for R=F (+0.19) and R=H (+0.46), suggesting a higher electron density on Cu in the fluorinated complex.     

Preparation and Structure of [Me3N(CF3)2BCCB(CF3)2NMe3]

Bis‐trimethylamine‐ethynyl‐di‐bis(trifluoromethyl)borane [Me₃N(CF₃)₂BCCB(CF₃)₂NMe₃] ( 1 ) has been prepared from trimethylamine‐ethynyl‐bis(trifluoromethyl)borane, [HCCB(CF₃)₂NMe₃], and dimethylamino‐bis(trifluoromethyl)borane, (CF₃)₂BNMe₂. The structure of 1 has been determined by x‐ray crystallography. In the solid state the molecule possesses crystallographic C_i symmetry. The acetylenic attachment to the boron atom is characterized by a short B–C bond length of 1.565(4) Å and an essentially linear B–C–C′ bond angle of 178.1(4)°.     

[μ‐(Me3SiCH2Sb)5–Sb1,Sb3–{W(CO)5}2] und [{(Me3Si)2CHSb}3Fe(CO)4] – zwei cyclische Komplexe mit Antimon‐Liganden

Syntheses and Crystal Structures of [μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] and [{(Me₃Si)₂CHSb}₃Fe(CO)₄] – Two Cyclic Complexes with Antimony Ligands cyclo‐(Me₃SiCH₂Sb)₅ reacts with [(THF)W(CO)₅] (THF = tetrahydrofuran) to form cyclo‐[μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] ( 1 ). The heterocycle cyclo‐ [{(Me₃Si)₂CHSb}₃Fe(CO)₄] ( 2 ) is formed by an insertion reaction of cyclo‐[(Me₃Si)₂CHSb]₃ and [Fe₂(CO)₉]. The crystal structures of 1 and 2 are reported.     

[Si4]4– and [Si9]4– Clusters Crystallized from Liquid Ammonia Solution – Synthesis and Characterization of K8[Si4][Si9]·(NH3)14.6

The extraction of the silicide K₁₂Si₁₇ with liquid ammonia in the presence of a sequestering agent and AuPPh₃Cl or Zn(Cp*)₂ led to crystals of the solvate compound K₈[Si₄][Si₉] · (NH₃)_14.6, which was characterized by single‐crystal X‐ray diffraction. It is the first compound with an isolated and ligand‐free [Si₄]^4– cluster obtained from solution. It also contains one [Si₉]^4– cluster per formula unit, whereas the precursor K₁₂Si₁₇ is built from [Si₄]^4– and [Si₉]^4– clusters with a 2:1 ratio.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.     

Synthese und Strukturen neuer Ringverbindungen des Bismuts mit Tris(trimethylsilyl)silyl und ‐stannylresten – [(Me3Si)3Si]4Bi4 und [(Me3Si)3Sn]6Bi8

Synthesis and Structures of Novel Ring Compounds of Bismuth with Tris(trimethylsilyl)silyl and ‐stannyl Substituents – [(Me₃Si)₃Si]₄Bi₄ and [(Me₃Si)₃Sn]₆Bi₈ A bicyclo[3.3.0]octane‐like core consisting of eight bismuth atoms is found in the novel octabismuthane Bi₈[Sn(SiMe₃)₃]₆. It is prepared like Bi₄[Si(SiMe₃)₃]₄ by reduction of BiBr₃ with Li(thf)₃E(SiMe₃)₃ (E = Si, Sn) together with (Me₃Si)₆E₂. Both bismuth ring compounds have been characterized by single crystal X‐ray crystallography.     

Tetraazidodiammincobaltate(III): Cis-[Co(N3)4(NH3)2]− und [Co(N3)4en]−

Tetra-azidodiamminecobaltates(III): cis-[Co(N₃)₄(NH₃)₂]^? and [Co(N₃)₄en]^? The preparation and the properties of complexes containing the anions cis-[Co(N₃)₄(NH₃)₂]^? and [Co(N₃)₄en]^? are described. The compounds [Co(NH₃)₆][Co(N₃)₄(NH₃)₂ · H₂O], [Co(N₃)₂(NH₃)₄][Co(N₃)₄(NH₃)₂], [As(C₆H₅)₄][Co(N₃)₄en], cis- and trans-[Co(N₃)₂en₂][Co(N₃)₄en] have been isolated.