Synthesis of polymers with hydroxyl end groups by atom transfer radical polymerization

Polymers prepared by atom transfer radical polymerization (ATRP) contain end groups defined by the initiator used. Alkyl halides, used as initiators, lead to polymers with an alkyl group at one end and a halide as the other chain end. Using functionalized initiators such as 2‐hydroxyethyl 2‐bromopropionate, hydroxyl groups can be directly incorporated at one polymer chain end while the other end functionality remains a halogen. The direct displacement of the halogen end groups with hydroxyl groups was unsuccessful due to side reactions such as elimination (for polystyrene) or hydrolysis of ester functions (for polyacrylate). Another approach to generate hydroxyl end groups was based on the substitution of the halogen end groups by ethanolamine. This was successful for polystyrene but additional substitution at the backbone esters was observed in polyacrylates. Multiple substitution reactions could be avoided by using 4‐aminobutanol instead of 2‐aminoethanol. Hydroxyl terminated polyacrylates were also obtained by extending the polyacrylate chain end with one allyl alcohol unit in a one‐pot process by adding an excess of allyl alcohol at the end of e polymerization of acrylate.     

SYNTHESIS OF POLYMERS WITH AMINO END GROUPS BY ATOM TRANSFER RADICAL POLYMERIZATION

Atom Transfer Radical Polymerization (ATRP) is a controlled radical polymerization process that produces polymers with predictable molecular weights, narrow polydispersities, and well-defined halogen end groups. The key factor in the control of the polymerization process is the presence of a metal/ligand complex that provides a fast, reversible activation and deactivation of the growing polymer chains. The ligands, used to complex the metal are mostly tertiary amino compounds. However, amines can interact with the halogen end groups of the initiator molecules or of the growing chains. Our investigations concern-ing this issue indicate that under the experimental conditions used during the polymerization process, interactions of end groups with tertiary amines are negligible. Ammonia and primary amines, e.g., n-butylamine, however can react with the halogen end groups. Moreover, after the polymerization reaction they can be used as nucleophilic agents to replace the halogens by other functional end groups. The use of difunctional molecules such as ethanolamine leads to the incorporation of alcohol end groups at the chain ends.     

Optimal ATRP‐Made Soluble Polymer Supports for Phosphoramidite Chemistry

Soluble polystyrene supports with optimal molecular structures for iterative phosphoramidite chemistry were prepared by atom‐transfer radical polymerization (ATRP) and subsequent chain‐end modification steps. The controlled radical polymerization of styrene was first performed in the presence of an 9‐fluorenylmethoxycarbonyl (Fmoc)‐protected amino‐functional ATRP initiator. Soluble supports of different molecular weight were prepared. Size‐exclusion chromatography and NMR analysis indicated formation of well‐defined polymers with controlled chain lengths and narrow dispersity. After synthesis, the bromo ω end group of the ATRP polymer was removed by dehalogenation in the presence of tributyltin hydride, and the Fmoc protecting group of the α moiety was subsequently cleaved with piperidine. The resulting α‐primary amine was afterwards treated with a linker containing a carboxyl group, a cleavable ester site, and a dimethoxytrityl‐protected hydroxyl group to afford ideal soluble supports for phosphoramidite chemistry. NMR analysis indicated that these chain‐end modifications were quantitative. The supports were tested for the synthesis of a non‐natural sequence‐defined oligophosphates. High‐resolution ESI‐MS analysis of the cleaved oligomers indicated formation of uniform species, and thus confirmed the efficiency of the ATRP‐made soluble polymer supports. In addition, the synthesis of a thymidine‐loaded soluble support was achieved.     

Copper‐mediated initiators for continuous activator regeneration atom transfer radical polymerization of acrylonitrile

Initiators for continuous activator regeneration atom transfer radical polymerization technique was first accessed to acrylonitrile by using CuBr₂/2,2′‐bipyridine as the catalyst, ethyl 2‐bromoisobutyrate as the halogen initiator, and azobis(isobutyronitrile) as the free radical initiator. The key to success is ascribed to the facile achievement of the rapid equilibrium between active species and dormant species. Effects of ligand, catalyst concentration, free radical initiator concentration, and reaction temperature on the polymerization reaction and molecular weight (MW) as well as polydispersity index (PDI) were investigated in detail. The polymerization proceeded in a controlled/living fashion even though the concentration of copper catalyst decreased to 50 ppm, which is evident in pseudo first‐order kinetics of polymerization, linear increase of molecular weight, low PDI, and high chain‐end functionality of the generated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cross‐linking photopolymerization of monoacrylate initiated by benzophenone

The chain‐end structure of the photopolymerized acrylate using benzophenone as an initiator was investigated as well as polymerization behavior. Dodecyl acrylate was used as a monomer in this study. Gelation occurred during ultraviolet (UV) irradiation, whereas a cross‐linker was not employed. Conversion‐time profile below gel point gave a linear first‐order plot suggesting that the steady‐state was held throughout polymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra of the resultant polymer indicated that most polymers had an acryloyl group at one of the chain‐ends, while some polymers had an acryloyl group at each chain‐end. The cross‐linking reaction leading to gelation would have been caused by the subsequent copolymerization of the residual monomer with the latter polymer having two acryloyl groups. Dissolved oxygen in the monomer solution influenced the polymer structure giving hydroxyl group at chain‐end. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1545–1553     

SYNTHESIS OF POLYMERS WITH PHOSPHONIUM END GROUPS BY ATOM TRANSFER RADICAL POLYMERIZATION

The end groups of polymers prepared by atom transfer radical polymerization (ATRP), are well-defined and determined by the initiator used, at least one of them is a halogen end group. The halogen end groups can be transformed to other functionalities such as phosphonium salts as demonstrated in this paper. Kinetic studies with the compounds 1-phenylethyl bromide and methyl 2-bromopropionate, models for the polystyrene and polyacrylate chain ends respectively, indicated that bromine end groups were readily transformed to phosphonium end groups upon the addition of phosphines. Stability tests with the obtained phosphonium salts showed that 1-phenylethyl trialkylphosphonium bromide was stable, even at higher temperatures and in the presence of free phosphines. The stability of the propionate analogue was limited due to the presence of the ester group in the molecule. Polystyrene and poly(methyl acrylate) phosphonium salts were synthesized and the presence of the end groups was demonstrated by ¹H NMR and ESI-MS or MALDI-TOFMS.     

Mechanistic and Synthetic Aspects of Atom Transfer Radical Polymerization

Abstract

Mechanistic and synthetic aspects of atom transfer radical polymerization (ATRP) are reviewed. This controlled/“living” system polymerizes many monomers including styrenes, (meth)acrylates, acrylonitrile and dienes. The halogen end groups can be converted to other functional groups such as amines and azides. In addition to producing well-defined linear homopolymers, statistical copolymers, block copolymers, and gradient copolymers, ATRP can be used to synthesize graft and hyperbranched copolymers through copolymerization with functionalized monomers. Selection of appropriate conditions for ATRP depends on targeted molecular weight and degree of polymer chain end-functionality and includes considering the monomer(s) to be polymerized, initiator structure/reactivity, amount of catalyst/deactivator used, halogen end-group used, and temperature.     

Modification of the halogen end groups of polystyrene prepared by ATRP

The stabilization modification of the halogen end groups of polystyrene prepared by atom transfer radical polymerization (ATRP) has been attempted. The reaction mechanism adopted is radical chain transfer reaction, and iso-propylbenzene is employed as not only the chain transfer agent but also the solvent. Moreover, Cu⁰ is used as the acceptor of the transformed halogen atom in some experiments. As evidenced by ¹H NMR analysis of the modified products, the halogen end group can really be converted into the much more stable carbon-hydrogen structure. When Cu⁰ is not used, the conversion of the halogen end groups rises rapidly during the early stage and the increase rate slows down after about 8 h reaction. In view of the influence of reaction temperature on the modification, the conversion increases almost exponentially with temperature in the range of 80-100 °C, and the increase rate slows down at higher temperature. ¹H NMR and SEC analyses prove that the modification reaction does not destroy the polymer backbone and the molecular weights remain almost the same as those of the unmodified samples. When Cu⁰ is introduced, the modification reaction proceeds much rapidly, the conversion of the halogen end groups rises almost linearly at the early stage and the nearly complete (>95%) dehalogenation of the polymeric chains is observed after only 12 h reaction. However, the molecular weights rise and the polydispersities become wider after the modification, which implies that the modification is accompanied with the couple termination of the polystyrene radicals besides chain transfer reaction. Furthermore, the couple termination can be restrained at some lower catalyst concentration. Indeed, the modified polymers show improved thermal stability, the initial weight loss temperatures is increased from 196 °C to 378 °C for the linear polystyrene and from 203 °C to 261 °C for the hyperbranched polystyrene.     

End‐Group Identity and Its Effect on the Thermal Degradation of Poly(butyl cyanoacrylate)

Poly(butyl cyanoacrylate) was synthesised using triphenylphosphane and pyridine initiators. Matrix‐assisted laser desorption/ionisation time of flight mass spectrometry and NMR spectroscopy were used to confirm that the initiator remains as a chain end group. The prepared polymers were subjected to thermal degradation and re‐analysed with results that show the loss of the initiator end group for the pyridine‐initiated polymer, but not for that initiated with triphenylphosphane. Pyrolysis gas chromatography‐mass spectrometry was used to observe the presence of the pyridine initiator in the volatile degradation products.     

Maleimide‐based thiol reactive multiarm star polymers via Diels‐Alder/retro Diels‐Alder strategy

Multiarm star polymers containing thiol‐reactive maleimide groups at their core have been synthesized by utilization of atom transfer radical polymerization (ATRP) of various methacrylates using a masked maleimide containing multiarm initiator. One end of the initiator contains multiple halogen groups that produce the star architecture upon polymerization and the other end contains a masked maleimide functional group. Unmasking of the maleimide group after the polymerization provides the thiol reactive maleimide core that is widely used in bioconjugation. Functionalization of the core maleimide group with a thiol containing tripeptide was used to demonstrate facile reactivity of the core of these multiarm polymers under reagent‐free conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2546–2556, 2010     

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions as a route to well‐defined mono and bis end‐functionalized poly(N‐isopropylacrylamide)

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by ¹H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009     

Block and star block copolymers by mechanism transformation. II. Synthesis of poly(DOP‐b‐St) by combination of ATRP and CROP

Styrene underwent the ATRP process using an asymmetric difunctional initiator, 2‐hydroxylethyl 2′‐bromobutyrate in combination with CuBr and 2,2′‐bipyridine (bpy). Polystyrene with hydroxyl and bromine groups at each end of the polymer (HO‐PSt‐Br) was obtained, and used as a chain‐transfer agent in the cationic ring‐opening polymerization of 1,3‐dioxepane with triflic acid as initiator. The structures of the polymerization products were analyzed by ¹H NMR and GPC analyses, indicating the formation of block copolymer. The molecular weight distribution of the block copolymer was relatively narrow and the molecular weight of the polyDOP block was high. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 436–443, 2000     

Controlled radical polymerization of N‐acryloylglycinamide and UCST‐type phase transition of the polymers

N‐Acryloylglycinamide was polymerized via the reversible addition fragmentation transfer process without sacrificing its key property, the upper critical solution temperature in water. This could be achieved by choosing an appropriate nonionic initiator [2,2′‐azobis(4‐methoxy‐2.4‐dimethyl valeronitrile) (V‐70)] and nonionic chain‐transfer agent (cyanomethyl dodecyl trithiocarbonate). A good molar mass control was accomplished as proved by the linear increase of molar mass with conversion, a chain extension experiment, and low dispersity. The influence of molar mass, polymer end groups, or salt concentration on the cloud point was analyzed by turbidimetry. Polymer end groups exerted a distinct effect on the cloud points, whereas the influence increased with decreasing molar masses. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Propylene Diblock Copolymers via Metallocene and Borane Chemistry

An isotactic chain end unsaturated polypropylene was prepared by the homogeneous metallocene catalyst Et(Ind)₂ZrCl₂ with MAO. Herein, the chain end unsaturated polypropylene proceeded the hydroboration reaction to prepare borane‐containing polypropylene. The borane‐containing polypropylene could be transformed to hydroxyl‐terminated polypropylene, PPOH. And then the polypropylene‐nylon 6 diblock copolymer, PP‐b‐NY6, was synthesized from telechelic PPOH by converting this prepolymer with toluene diisocyanate and using the resulting materials as macroactivators for anionic caprolactam polymerization. Meanwhile, this investigation used borane‐containing polypropylene and oxygen to produce free radicals at the chain end on the polypropylene. Experimental results indicate that the free radical is an effective initiator for the polymerization of methyl methacrylate to produce diblock PP‐b‐PMMA. The block copolymers are characterized by IR, NMR, and DSC analyses. The diblock copolymer is a good compatibilizer for polymer blends.     

Symmetrical polymer systems prepared using a degradable bifunctional atom transfer radical polymerization initiator: Synthesis,characterization, and cleavage

Linear (co)polymers and dimethacrylate‐end‐linked polymer networks of methyl methacrylate with 2‐(dimethylamino)ethyl methacrylate, cleavable in the middle of the polymer chain, either under thermolysis or alkaline hydrolysis conditions, were prepared via atom transfer radical polymerization (ATRP) using a specially designed bifunctional degradable initiator. This initiator was 2,6‐pyridinediethanol di(2‐bromo‐2‐methyl propanoate) (PyDEDBrMeP), bearing two 2‐(pyridin‐2‐yl)ethyl ester moieties, known for their thermal and hydrolytic (alkaline conditions) lability. As a control, a more stable bifunctional ATRP initiator, 2,6‐pyridinedimethanol di(2‐bromo‐2‐methyl propanoate) (PyDMDBrMeP), was also synthesized together with the corresponding linear polymers and polymer networks prepared from it. Thermal or hydrolytic treatment of the polymers prepared using PyDEDBrMeP led to a reduction in the molecular weights of the linear polymers by a factor of two, and to the conversion of the polymer networks to soluble branched (star) structures, consistent with the expected cleavage of the initiator residue located in the middle of the polymer chain. Thermal treatment of the polymers prepared using PyDMDBrMeP did not affect their molecular weight due to the thermal stability of the (pyridin‐2‐yl)methyl ester group, while treatment under alkaline hydrolysis conditions resulted in complete cleavage, similar to the PyDEDBrMeP‐prepared polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2342–2355     

Removal of the copper catalyst from atom transfer radical polymerization mixtures by chemical reduction with zinc powder

Simple mixing of an atom transfer radical polymerization (ATRP) mixture with zinc powder was demonstrated to result in rapid decolorizing of the solution and precipitation of elemental copper, using small amounts of silica gel as seeding material. The experiments revealed that the chemical reduction of copper by wetted zinc powder (i.e., 0.325 g/mmol copper) is fast and completed within less than 5 min. UV spectra of the filtered polymer solution showed no any trace of copper. Terminal bromoalkyl groups of the polymers in the ATRP solution were determined to be unchanged by short‐term contact with zinc powder at room temperature and a nearly complete reductive dehalogenation takes place only after 24 h of interaction, as evidenced by reaction of elemental zinc with a model compound, ethyl bromoacetate. Indeed, poly(methyl methacrylate) (PMMA) sample (M_n: 7900, polydispersity index: 1.09) isolated from ATRP mixture after the copper removal a by short contact with zinc powder (i.e., 15 min) was determined “still living” as confirmed by chain extension with styrene, ethyl acrylate, and t‐butyl acrylate monomers to give block copolymers. The presence of acetic acid was demonstrated to accelerate reductive dehalogenation of PMMA end‐groups by zinc and yields nonliving polymer within 2 h. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

4,4,5,5-Tetra(3,5-dibromophenyl)-2,2-diphenyl-1,3-dioxa-2-silole and related compounds as precursors to flame retardant oligomers

Certain strained five-membered heterocycles undergo thermally-induced, carbon-carbon bond homolysis to generate diradicals capable of initiating vinyl polymerization. These compounds usually contain two oxygen atoms and a larger heteroatom (silicon, phosphorus, sulfur) in addition to carbon. If the heterocycle is suitably substituted with halogen (particularly bromine) containing moities it may function as a vehicle to permit incorporation of flame-retarding units into a polymer or oligomer. When an appropriate heterocycle is used as an initiator for radical polymerization each polymer chain formed contains at least one flame-retarding unit. One such heterocycle is 4,4,5,5-tetra(3,5-dibromophenyl)-2,2-diphenyl-1,3-dioxa-2-silole. In instances in which the heterocycle also acts as a monomer, i.e., it is reactive toward chain-propagating radicals, additional flame-retarding activity may be incorporated into the polymer.     

Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Improving the knowledge and design of end groups in polymers produced by free radical polymerization

Several techniques have been used to probe polymer end groups. The nitroxide radical trapping technique has been used (i) to show that initiator-derived unsaturated end groups in polymethyl methacrylate can be minimized by using t-hexyl peroxypivalate as the initiator (ii) to predict the end and penultimate groups in acrylonitrile/ethyl vinyl ether copolymer produced by t-butoxyl initiation by analogy with the initiation mechanism (iii) to predict probable end groups in polyacrylonitrile and polystyrene produced by cyanoisopropyl initiation in the presence of adventitious oxygen. NMR techniques have been used to show that the end groups of functionalized oligomers, made from styrene and methacrylonitrile by the addition-fragmentation chain transfer technique with allylic sulphides, conform to the expected structures. © 1998 John Wiley & Sons, Ltd.     

Synthesis of halogen-free amino-functionalized polymethyl methacrylate by atom transfer radical polymerization (ATRP)

In order to obtain amino-terminated polymethyl methacrylate (PMMA-NH₂) free of halogen we used the atom transfer radical polymerization (ATRP) to polymerize methyl methacrylate (MMA) in presence of an initiator containing an alkyl bromide unit and a protected amine functional group. The use of CuBr / N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as co-catalyst system results in a polymer free of halogen due to hydrogen transfer from PMDETA to the growing polymer chain. However, side reactions occur affecting the typically “living” character of the ATRP. The measured molecular weights are consistently higher than the theoretical ones and the molecular weight distributions are relatively broad.