Chloro- und Polyselenoselenate(II) Darstellung,Struktur und Eigenschaften von [Ph3(C2H4OH)P]2[SeCl4] · MeCN, [Ph4P]2[Se2Cl6] und [Ph4P]2[Se(Se5)2]

Chloro- and Polyselenoselenates(II): Synthesis, Structure, and Properties of [Ph₃(C₂H₄OH)P]₂[SeCl₄] · MeCN, [Ph₄P]₂[Se₂Cl₆], and [Ph₄P]₂[Se(Se₅)₂] By symproportionation of elemental selenium and SeCl₄ in polar protic solvents the novel chloroselenates(+II), [SeCl₄]^2? and [Se₂Cl₆]^2?, could be stabilized; they were crystallized with voluminous organic cations. They were characterized from complete X-ray structure analysis. Yellow-orange [Ph₃(C₂H₄OH)P]₂[SeCl₄] · MeCN (space group P1 , a = 10.535(4), b = 12.204(5), c = 16.845(6) Å, α = 77.09(3)°, β = 76.40(3)°, γ = 82.75(3)° at 140 K) contains in its crystal structure monomeric [SeCl₄]^2? anions with square-planar coordination of Se(+II). The mean Se? Cl bond length is 2.441 Å. In yellow [Ph₄P]₂[Se₂Cl₆] (space group P1 , a = 10.269(3), b = 10.836(4), c = 10.872(3) Å, α = 80.26(3)°, β = 79.84(2)°, γ = 72.21(3)° at 140 K) a dinuclear centrosymmetric [Se₂Cl₆]^2? anion, also with square-planar coordinated Se(+II), is observed. The average terminal and bridging Se? Cl bond distances are 2.273 and 2.680 Å, respectively. From redox reactions of elemental Se with boranate/thiolate in ethanol/DMF the bis(pentaselenido)selenate(+II) anion [Se(Se₅)₂]^2? was prepared as a novel type of a mixed-valent chalcogenide. In dark-red-brown [Ph₄P]₂[Se(Se₅)₂] (space group P2₁/n, a = 12.748(4), b = 14.659(5), c = 14.036(5) Å, β = 108.53(3)° at 140 K) centrosymmetric molecular [Se(Se₅)₂]^2? anions with square-planar coordination of the central Se(+II) by two bidentate pentaselenide ligands is observed (mean Se? Se bond lengths: 2.658 Å at Se(+II), 2.322 Å in [Se₅]_2?). The resulting six-membered chelate rings with chair conformation are spirocyclically linked through the central Se(+II). The vibrational spectra of the new anions are reported.     

Synthese und Strukturen von [Cu8As3(AsSiMe3)2(dppb)4]+‐[Cu{As2(SiMe3)2}{As4(SiMe3)4}]‐, [Cu8As3(AsSiMe3)2(dppb)4]+‐[Cu{As(SiMe3)2}2]‐ und [Cu10(Sb3)2(SbSiMe3)2(dppm)6]

The reaction of CuCl, LiAs(SiMe₃)₂ and dppb (Bis(diphenylphosphino)butane) leads to the formation of ionic cluster complexes. Depending on the reaction conditions one can isolate [Cu₈As₃(AsSiMe₃)₂(dppb)₄]⁺[Cu{As₂(SiMe₃)₂}{As₄(SiMe₃)₄}]^‐ ( 1 ) and [Cu₈As₃(AsSiMe₃)₂(dppb)₄]⁺[Cu{As(SiMe₃)₂}₂]^‐ ( 2 ). The same reaction of CuCl, dppm (Bis(diphenylphosphino)methane) and LiSb(SiMe₃)₂ leads to the neutral cluster complex [Cu₁₀(Sb₃)₂(SbSiMe₃)₂(dppm)₆] ( 3 ). The structures of 1‐3 have been solved by X‐ray single crystal analyses.     

Zinkselenid- und Zinktelluridcluster mit Phenylselenolat- und Phenyltellurolatliganden. Die Kristallstrukturen von [NEt4]2[Zn4Cl4(SePh)6], [NEt4]2[Zn8Cl4Se(SePh)12], [Zn8Se(SePh)14(PnPr3)2], [HPnPr2R]2[Zn8Cl4Te(TePh)12] (R = nPr,Ph) und [Zn10Te4(TePh)12(PR3)2] (R = nPr,Ph)

Zincselenide- and Zinctellurideclusters with Phenylselenolate- and Phenyltellurolateligands. The Crystal Structures of [NEt₄]₂[Zn₄Cl₄(SePh)₆], [NEt₄]₂[Zn₈Cl₄Se(SePh)₁₂], [Zn₈Se(SePh)₁₄(PⁿPr₃)₂], [HPⁿPr₂R]₂[Zn₈Cl₄Te(TePh)₁₂] (R = ⁿPr, Ph), and [Zn₁₀Te₄(TePh)₁₂(PR₃)₂] (R = ⁿPr, Ph) In the prescence of NEt₄Cl ZnCl₂ reacts with PhSeSiMe₃ or a mixture of PhSeSiMe₃/Se(SiMe₃)₂ to form the ionic complexes [NEt₄]₂[Zn₄Cl₄(SePh)₆] 1 or [NEt₄]₂[Zn₈Cl₄Se(SePh)₁₂] 2 respectively. The use of PⁿPr₃ instead of the quarternary ammonia salt leads in toluene to the formation of crystalline [Zn₈Se(SePh)₁₄(PⁿPr₃)₂] 3 . Reactions of ZnCl₂ with PhTeSiMe₃ and tertiary phosphines result in acetone in crystallisation of the ionic clusters [HPⁿPr₂R]₂[Zn₈Cl₄Te(TePh)₁₂] (R = ⁿPr 4 , Ph 5 ) and in THF of the uncharged [Zn₁₀Te₄(TePh)₁₂(PR₃)₂] (R = ⁿPr 6 , Ph 7 ). The structures of 1–7 were obtained by X-ray single crystal structure. ( 1 : space group P2₁/n (No. 14), Z = 4, a = 1212,4(2) pm, b = 3726,1(8) pm, c = 1379,4(3) pm β = 99,83(3)°; 2 space group P2₁/c (Nr. 14), Z = 4, a = 3848,6(8) pm, b = 1784,9(4) pm, c = 3432,0(7) pm, β = 97,78(3)°; 3 : space group Pnn2 (No. 34), Z = 2, a = 2027,8(4) pm, b = 2162,3(4) pm, c = 1668,5(3) pm; 4 : space group P2₁/c (No. 14), Z = 4, a = 1899,8(4) pm, b = 2227,0(5) pm, c = 2939,0(6) pm, β = 101,35(3)°; 5 : space group space group P2₁/n (No. 14), Z = 4, a = 2231,0(5) pm, b = 1919,9(4) pm, c = 3139,5(6) pm, β = 109,97(4)°; 6 : space group I4₁/a (No. 88), Z = 4, a = b = 2566,0(4) pm, c = 2130,1(4) pm; 7 : space group P1¯ (No. 2), Z = 2, a = 2068,4(4) pm, b = 2187,8(4) pm, c = 2351,5(5) pm, α = 70,36°, β = 84,62°, γ( = 63,63°)     

Halide Abstraction from Organic Solvents in Reactions of a Copper(I) Alkoxide: Synthesis and Crystal Structures of [Cu5(dppm)(dppm−)2(OtBu)Cl2] and [Cu3(dppm)3Br2][CuBr2]

The synthesis and structures of the two Cu^I halide complexes [Cu₅(dppm)(dppm^?)₂(O^tBu)Cl₂] and [Cu₃(dppm)₃Br₂][CuBr₂] (dppm = Ph₂PCH₂PPh₂, dppm^? = [Ph₂PCHPPh₂]^?) are reported. The compounds were obtained by treating reaction mixtures of [CuO^tBu] and dppm with dichloromethane or dibromomethane.     

Synthesis and Structural Characterization of [Cu20Se4(μ3‐SePh)12(PPh3)6] and [Ag(SePh)]∞

Reaction of lithium phenylselenothiolate, generated in situ from the reductive cleavage of PhSe‐SiMe₃ with alkyl lithium reagents and insertion of elemental sulfur, with triphenylphosphine solubilized CuCl affords the molecular cluster complex [Cu₂₀Se₄ (μ₃‐SePh)₁₂(PPh₃)₆] ( 1 ). The analogous reaction with AgCl yields the extended structure [Ag(SePh)]_∞ ( 2 ) in which an infinite layer of Ag^I atoms is capped on either side by μ₄‐SePh ligands. 1: space group P¯1, a = 17.9510(6), b = 18.1712(7), c = 31.4311(11) Å, a = 78.098(2), β = 82.905(2), γ = 70.012(2)°. 2: space group C2/c, a = 5.8762(6), b = 7.2989(7), c = 29.124(2) Å, β = 95.790(3)°.     

Synthesen und Molekülstrukturen von [Cu20Ga10Cl4Se23(PEt2Ph)12] und [Cu14In6Se7(iPrSe)18]

Syntheses and Structures of [Cu₂₀Ga₁₀Cl₄Se₂₃(PEt₂Ph)₁₂] and [Cu₁₄In₆Se₇(iPrSe)₁₈] CuCl and GaCl₃ react with Se(SiMe₃)₂ in thf solution to yield in the presence of PEt₂Ph [Cu₂₀Ga₁₀Cl₄Se₂₃(PEt₂Ph)₁₂] ( 1 ). Reaction of CuCl, InCl₃ and TMEDA with iPrSeSiMe₃ in DME results in the crystallisation of [Cu₁₄In₆Se₇(iPrSe)₁₈] ( 2 ). The structures of 1 and 2 were determined by X‐ray single crystal structure analysis and display two new types of molecular clusters formed by the elements of group 11, 13, and 16. However, both cluster structures show no analogy to the structures of the related bulk phases.     

Synthesis and Structure of the Clusters [Hg2(μ—SePh)2(SePh)2(PPh3)2] and [Hg3Br3(μ—SePh)3] · 2 DMSO

The compounds [Hg₂(μ—SePh)₂(SePh)₂(PPh₃)₂] ( I ) and [Hg₃Br₃(μ—SePh)₃] · 2 DMSO ( II ) are formed by reactions of [Hg(SePh)₂] with PPh₃ in THF( I ) or with HgBr₂ in DMSO ( II ) at room temperature. X—ray crystallography reveals that the cluster I consists of a distorted square built by each two Hg and Se atoms. The Hg atoms have almost tetrahedral co‐ordination environments formed by selenium atoms of two (μ‐^—SePh) ligands and Se and P atoms of terminal ^—SePh and PPh₃ ligands. The compound II is a six‐membered ring with alternating Hg and Se atoms in the chair conformation. Two DMSO molecules occupy positions below and above the [Hg₃Se₃] ring with the oxygen atoms directed to the centre of the ring.     

Cobalt Chalcogenide Clusters. Synthesis,Characterization and DFT Calculations of [Co4Se2(CO)10] and [Co4Te2(CO)11]. Crystal Structure of [Co8Se4(CO)16(μ‐dppa)2]

The reactions of [Co₂(CO)₈] with E(SiMe₃)₂ (E = Se, Te) in CH₂Cl₂ result in the formation of the compounds [Co₄Se₂(CO)₁₀]> ( 1 ) and [Co₄Te₂(CO)₁₁] ( 2 ), respectively. Both cluster complexes have similar molecular structures in which the cobalt atoms form four‐membered rings with μ₄‐bridging chalcogen atoms (Se and Te) above and below the plane of the metal atoms and the carbonyl ligands as either terminal or μ₂‐bridging ligands. DFT‐calculations for both compounds have been carried out in order to obtain some more information about their electronic distribution. In the presence of the phosphine Ph₂PC≡CPPh₂ (dppa), the reaction of [Co₂(CO)₈] with Se(SiMe₃)₂ leads to the formation of [Co₈Se₄(CO)₁₆(μ‐dppa)₂] ( 3 ). During the reaction two molecules of [Co₂(CO)₈] have been added to the acetylene groups of the dppa ligands, whilst the remaining cobalt atoms coordinate to the phosphorus atoms of the phosphine. In this compounds the selenium atoms act as μ₃‐ligands, bridging the metal atoms bonded to the phosphorus with those bonded to the acetylene groups.     

Synthese und Strukturen der selenolatoverbrückten Quecksilbercluster [Hg6(SePh)12(PtBu3)2] und (HPtBu3)2[Hg6(SePh)14]

Synthesis and Structures of the Selenolato-Bridged Mercury Clusters [Hg₆(SePh)₁₂(P t Bu₃)₂] and (HP t Bu₃)₂[Hg₆(SePh)₁₄] The reaction of HgCl₂ with PtBu₃ and PhSeSiMe₃ yields [Hg₆(SePh)₁₂(PtBu₃)₂] ( 1 ) and (HPtBu₃)₂[Hg₆(SePh)₁₄] ( 2 ). X-ray structural analysis of the compounds shows them to have similar Hg–Se cages with distorted tetrahedral coordination around mercury. The cages are built up from edge- and vertex-sharing distorted tetrahedra.     

Eisen(II)—Phosphin-Komplexe Synthese und Kristallstrukturen von [Fe2I4(dppe)2], [Fe2(SR)4(dppe)2], [Fe(SR′)2(dppp)] und [Fe(SR)2(PMePh2)2] (dppe = Ph2P(CH2)2PPh2; dppp = Ph2P(CH2)3PPh2; R = 2,4,6-Me3C6H2; R′ = 2,4-tBuC6H3)

Iron(II) Phosphane Complexes. Synthesis and Crystal Structures of [Fe₂I₄(dppe)₂], [Fe₂(SR)₄(dppe)₂], [Fe(SR′)₂(dppp)] and [Fe(SR)₂(PMePh₂)₂] (dppe = Ph₂P(CH₂)₂PPh₂; dppp = Ph₂P(CH₂)₃PPh₂; R = 2,4,6-Me₃C₆H₂; R′ = 2,4-tBuC₆H₃) The title compounds were isolated and their structures determined by crystallographic methods. [Fe₂I₄(dppe)₂] ( 1 ) and [Fe₂(SR)₄(dppe)₂] ( 2 ) form dimeric complexes with the bidentate phosphane binding to different iron atoms. The resulting ten-membered rings of both compounds exhibit a nearly identical conformation. The central FeS₂P₂ units of the mononuclear complexes [Fe(SR′)₂(dppp)] ( 3 ) and [Fe(SR)₂(PMePh₂)₂] ( 4 ) show like 2 large deviations from ideal C_2v symmetry with bonding angles around the central iron atom ranging from 97.2, 92.5, and 96.5° (angle P? Fe? P in 2, 3 , and 4 , respectively) to 129.0, 129.9, and 133.6° (angle S? Fe? S in 2, 3 , and 4 , respectively).     

Synthesen und Kristallstrukturen der chalkogenidoverbrückten Nickelclusterverbindungen [Ni5Se4Cl2(PPhEt2)6], [Ni12Se12(PnPr3)6] und [Ni18S18(PiPr3)6]

Syntheses and Crystal Structures of Chalcogenido‐bridged Nickel Cluster Compounds [Ni₅Se₄Cl₂(PPhEt₂)₆], [Ni₁₂Se₁₂(PⁿPr₃)₆], and [Ni₁₈S₁₈(PⁱPr₃)₆] The reaction of (R)ESiMe₃ (R = SiMe₃, Mes = C₉H₁₁; E = S, Se) with [NiCl₂(PPhEt₂)₂] and [NiCl₂(PR₃)₂] (R = ⁿPr, ⁱPr) gives new chalcogenido‐bridged nickel cluster compounds [Ni₅Se₄Cl₂(PPhEt₂)₆]·2THF ( 1 ), [Ni₁₂Se₁₂(PⁿPr₃)₆]·2THF ( 2 ), and [Ni₁₈S₁₈(PⁱPr₃)₆]·2THF ( 3 ). The structures of these compounds were determined by single crystal X‐ray structural analyses.     

Investigating the Thermolysis Products of [Cd10Se4(SePh)12(P n Pr3)4] – The New Cluster Ion [Cd17Se4(SePh)28]2?

Analytical studies on the thermolysis products from [Cd₁₀Se₄(SePh)₁₂(PnPr₃)₄] are reported leading to the identification of the doubly negatively charged species [Cd₁₇Se₄(SePh)₂₈]²⁻. Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) has been successfully applied to analyse the composition of a polycrystalline precipitate after treatment with SePh⁻ in tetrahydrofuran (THF). Presumably, SePh⁻ reacts with the insoluble (polymeric) cluster product as a charging ligand leading to dissolved monomeric units of the cluster anion [Cd₁₇Se₄(SePh)₂₈]²⁻. This cluster anion could also be crystallized from solutions as [Na(thf)₂18-crown-6][Cd₁₇Se₄(SePh)₂₈] and [Na(dme)₃]₂[Cd₁₇Se₄(SePh)₂₈]. The experimental results promise a wider applicability of the charged ligand exchange method for the electrospray mass spectrometric characterization of neutral clusters and to obtain intensive monodisperse cluster ion beams for further gas-phase studies. Dedicated to Prof. Dieter Fenske on the occasion of his 65th birthday.     

Münzmetallcluster mit verbrückenden Imido‐ und Amidoliganden: [{Li(dme)3}4][Cu18(NPh)11] und [Ag6(NHPh)4(PnPr3)6Cl2]

Copper and Silver Clusters with Bridging Imido and Amido Ligands From the reactions of copper and silver chloride with tertiary phosphines and lithiated aniline the compounds [{Li(dme)₃}₄][Cu₁₈(NPh)₁₁] ( 1 ) and [Ag₆(NHPh)₄(PⁿPr₃)₆Cl₂] ( 2 ) were obtained. The structure of the anion in 1 is closely related to the structures of the reported clusters [Cu₁₂(NPh)₈]^4– [1] and [Cu₂₄(NPh)₁₄]^4– [2]: 1 represents the third phenyl imido bridged copper cluster which contains parallel Cu₃‐ and Cu₆‐planes. The dimeric compound 2 consists of two Ag₃ units with bridging phenyl amido ligands. Two chloride and six phosphine ligands complete the ligand sphere and shield the metal core effectively.     

Synthese und Kristallstrukturen von [Cu4(As4Ph4)2(PRR′2)4], [Cu14(AsPh)6(SCN)2(PEt2Ph)8], [Cu14(AsPh)6Cl2(PRR′2)8], [Cu12(AsPh)6(PPh3)6], [Cu10(AsPh)4Cl2(PMe3)8], [Cu12(AsSiMe3)6(PRR′2)6] und [Cu8(AsSiMe3)4(PtBu3)4] (R,R′ = organische Gruppen)

Syntheses and Crystal Structures of [Cu₄(As₄Ph₄)₂(PRR′₂)₄], [Cu₁₄(AsPh)₆(SCN)₂(PEt₂Ph)₈], [Cu₁₄(AsPh)₆Cl₂(PRR′₂)₈], [Cu₁₂(AsPh)₆(PPh₃)₆], [Cu₁₀(AsPh)₄Cl₂(PMe₃)₈], [Cu₁₂(AsSiMe₃)₆(PRR′₂)₆], and [Cu₈(AsSiMe₃)₄(P^tBu₃)₄] (R, R′ = Organic Groups) Through the reaction of CuSCN with AsPh(SiMe₃)₂ in the presence of tertiary phosphines the compounds [Cu₄(As₄Ph₄)₂(PRR′₂)₄] ( 1 – 3 ) ( 1 : R = R′ = ⁿPr, 2 : R = R′ = Et; 3 : R = Me, R′ = ⁿPr) and [Cu₁₄(AsPh)₆(SCN)₂(PEt₂Ph)₈] ( 4 ) can be synthesised. Using CuCl instead of CuSCN results to the cluster complexes [Cu₁₄(AsPh)₆Cl₂(PRR′₂)₈] ( 5–6 ) ( 5 : R = R′ = Et; 6 : R = Me, R′ = ⁿPr), [Cu₁₂(AsPh)₆(PPh₃)₆] ( 7 ) and [Cu₁₀(AsPh)₄Cl₂(PMe₃)₈] ( 8 ). Through reactions of CuOAc with As(SiMe₃)₃ in the presence of tertiary phosphines the compounds [Cu₁₂(AsSiMe₃)₆(PRR′₂)₆] ( 9 – 11 ) ( 9 : R = R′ = Et; 10 : R = Ph, R′ = Et; 11 : R = Et, R′ = Ph) and [Cu₈(AsSiMe₃)₄(P^tBu₃)₄] ( 12 ) can be obtained. In each case the products were characterised by single‐crystal‐X‐ray‐structure‐analyses. As the main structure element 1 – 3 each have two As₄Ph₄^2–‐chains as ligands. In contrast 4 – 12 contain discrete AsR^2–ligands.     

Neue Gold‐Selen‐Komplexverbindungen: Synthesen und Strukturen von [Au10Se4(dpppe)4]Br2, [Au2Se(dppbe)]∞, [(Au3Se)2(dppbp)3]Cl2 und [Au34Se14(tpep)6(tpepSe)2]Cl6

Novel Gold Selenium Complexes: Syntheses and Structures of [Au₁₀Se₄(dpppe)₄]Br₂, [Au₂Se(dppbe)]_∞, [(Au₃Se)₂(dppbp)₃]Cl₂, and [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ The reaction of gold phosphine complexes [(AuX)(PR₃)] (X= halogen; R = org. group) with Se(SiMe₃)₂ yield to new chalcogeno bridged gold complexes. Especially within the use of polydentate phosphine ligands cluster complexes like [Au₁₀Se₄(dpppe)₄]Br₂ ( 1 ) (dpppe = 1, 5‐Bis(diphenylphosphino)pentane), [Au₂Se(dppbe)]_∞ ( 2 ) (1, 4‐Bis(diphenylphosphino)benzene), [(Au₃Se)₂(dppbp)₃]Cl₂ ( 3 ) (dppbp = 4, 4′‐Bis‐diphenylphosphino)biphenyl) und [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ ( 4 ) (tpep = 1, 1, 1‐Tris(diphenylphosphinoethyl)phosphine, tpep^Se = 1, 1‐Bis(diphenylphosphinoethyl)‐1‐(diphenylselenophosphinoethylphosphine) could be isolated and their structures could be determined by X‐ray diffraction. ( 1: Space group P1 (No. 2), Z = 2, a = 1642.1(11), b = 1713.0(9), c = 2554.0(16) pm, α = 80.41(3)°, β = 76.80(4)°, γ = 80.92(4)°; 2: Space group P2₁/n (No. 14), Z = 4, a = 947.3(2), b = 1494.9(3), c = 2179.6(7) pm, β = 99.99(3)°; 3: Space group P2₁/c (No. 14), Z = 8, a = 2939.9(6), b = 3068.4(6), c = 3114.5(6) pm, β = 109.64(3)°; 4: Space group P1 (No. 2), Z = 1, a = 2013.7(4), b = 2420.6(5), c = 2462.5(5) pm, α = 77.20(3), β = 74.92(3), γ = 87.80(3)°).     

Synthesen und Strukturen der polymeren Silber‐Komplexe [Ag2Cl2(dppbp)3]∞, [Ag2(SPh)2(dppe)3]∞ und [Ag2(SPh)2(triphos)]∞ sowie der Silber‐Chalkogenido‐Cluster [Ag7(SPh)7(dppm)3], {[Ag7(TePh)7(dppp)3]2(dppp)} und [Ag22Cl(SPh)10(PhCOO)11(dmf)3]∞

Syntheses and Structures of the Polymeric Silver Complexes [Ag₂Cl₂(dppbp)₃]_∞, [Ag₂(SPh)₂(dppe)₃]_∞ and [Ag₂(SPh)₂(triphos)]_∞ as well as the Silver Chalcogenido Clusters [Ag₇(SPh)₇(dppm)₃], {[Ag₇(TePh)₇(dppp)₃]₂(dppp)}, and [Ag₂₂Cl(SPh)₁₀(PhCOO)₁₁(dmf)₃]_∞ The reaction of silver carboxylate with silylated chalcogen compounds have been found to have a possibility for the synthesis of metal‐chalcogenide‐custers. Especially phosphine ligands have been found to be useful in stabilising the cluster cores. Some of the silver carboxylate phosphine complexes, which are formed in‐situ, ([Ag₂Cl₂(dppbp)₃]_∞ ( 1 )) and some silver chalcogen complexes ([Ag₂(SPh)₂(dppe)₃]_∞ ( 2 ) und [Ag₂(SPh)₂(triphos)]_∞ ( 3 )), could be isolated and characterised by X‐ray diffraction. Using special reaction conditions, it is possible to isolate cluster species like [Ag₇(SPh)₇(dppm)₃] ( 4 ), {[Ag₇(TePh)₇(dppp)₃]₂(dppp)} ( 5 ) and [Ag₂₂Cl(SPh)₁₀(PhCOO)₁₁(dmf)₃]_∞ ( 6 ) beside the complex compounds. 1: Space group P2₁/n (No. 14), Z = 2, a = 1336, 1(2), b = 2081, 2(5), c = 2015, 4(4) pm, β = 99, 87(2)°; 2: Space group P2₁/n (No. 14), Z = 2, a = 1416, 1(3), b = 1874, 7(4), c = 1444, 8(3) pm, β = 93, 26(3)°; 3: Space group P2₁/n (No. 14), Z = 4, a = 1456, 8(3, b = 1890, 2(4), c = 1916, 1(4) pm, β = 99, 11(3)°; 4: Space group P2₁/n (No. 14), Z = 4, a = 1570, 2(3), b = 2798, 5(6), c = 2752, 7(6) pm, β = 98, 02(3)°; 5: Space group P1 (No. 2), Z = 2, a = 2115, 5(4), b = 2553, 3(5), c = 3188, 7(6) pm, α = 68, 87(3)°, β = 74, 05(3)°, γ = 69, 70(3)°; 6: Space group P1 (No. 2), Z = 2, a = 1583, 0(3), b = 1709, 6(3), c = 2990, 0(6) pm, α = 80, 41(3)°, β = 88, 86(3)°, γ = 71, 10(3)°).     

Benzeneselenolates of Mercury(II). Crystal and Molecular Structures of [Hg(SePh)2] and (Bu4N)[Hg(SePh)3]

The reaction of dibenzenediselenide, (SePh)₂, with mercury in refluxing xylene gives bis(benzeneselenolato)mercury(II), [Hg(SePh)₂], in a good yield. (ⁿBu₄N)[Hg(SePh)₃] is obtained by the reaction of [Hg(SePh)₂] with a solution of [SePh]^– and (ⁿBu₄N)Br in ethanol. The solid state structures of both compounds have been determined by X-ray diffraction. The mercury atom in [Hg(SePh)₂] (space group C2, a = 7.428(2), b = 5.670(1), c = 14.796(4) Å, β = 103.60(1)°) is linearly co-ordinated by two selenium atoms (Hg–Se = 2.471(2) Å, Se–Hg–Se = 178.0(3)°). Additional weak interactions between the metal and selenium atoms of neighbouring molecules (Hg…Se = 3.4–3.6 Å) associate the [Hg(SePh)₂] units to layers. The crystal structure of (ⁿBu₄N)[Hg(SePh)₃] (space group P2₁/c, a = 9.741(1), b = 17.334(1), c = 21.785(1) Å, β = 95.27(5)°) consists of discrete complex anions and (ⁿBu₄N)⁺ counter ions. The coordination geometry of mercury is distorted trigonal-planar with Hg–Se distances ranging between 2.5 and 2.6 Å.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

Synthesis,structure and characterization of the trinuclear copper (I) complex [Cu3(μ3-Br)2(dppm)3]Br

The novel trinuclear copper(I) complex [Cu₃(μ₃,-Br)₂(dppm)₃]Br has been obtained by reaction of bis(diphenyl-phosphino)methane (dppm) with cupric bromide. The title complex was characterized by single-crystal X-ray analysis, elemental analysis, molecular weight determination, ³¹P NMR and its conductivity was also measured. The [ Cu₃ (dppm)₃ Br₂ ]⁺ cation consists of a triangular array of copper atoms, with dppm ligands (Ph₂ PCH₂ PPh₂) bridging each edge of the triangle and two triply bridging Br groups bound to the two faces of the Cu₃ unit. Crystallographic data: monoclinic, space group P2₁/c, a = 1.4739(4), b = l.7708(5), c = 2.8395(8) nm, β= 97.16(3)°, V = 7.353nm³, Z = 4, F(000)= 3296, D_calc, = 1.472 g/cm³, μ = 26.478 cm^?1, R=0.06, R_W = 0.08, 4654 reflections observed with I3≥(I).     

Metal Derivatives of Heterocyclic‐2‐thiones: Crystal Structures of [Bis(diphenylphosphanyl)propane][bis(pyrimidine‐2‐thiolato)]ruthenium(II) and [Bis(diphenylphosphanyl)methane][bis(pyridine‐2‐thiolato)]ruthenium(II)

Ruthenium(II) Complexes containing pyrimidine‐2‐thiolate (pymS^–) and bis(diphenylphosphanyl)alkanes [Ph₂P–(CH₂)_m–PPh₂, m = 1, dppm; m = 2, dppe; m = 3, dppp; m = 4, dppb] are described. Reactions of [RuCl₂L₂] (L = dppm, dppp) and [Ru₂Cl₄L₃] (L = dppb) with pyrimidine‐2‐thione (pymSH) in 1:2 molar ratio in dry benzene in the presence of Et₃N base yielded the [Ru(pymS)₂L] complexes (pymS^– = pyrimidine‐2‐thiolate; L = dppm ( 1 ); dppp ( 3 ); dppb ( 4 )). The complex [Ru(pymS)₂(dppe)] ( 2 ) was indirectly prepared by the reaction of [Ru(pymS)₂(PPh₃)₂] with dppe. These complexes were characterized using analytical data, IR, ¹H, ¹³C, ³¹P NMR spectroscopy, and X‐ray crystallography (complex 3 ). The crystal structure of the analogous complex [Ru(pyS)₂(dppm)] ( 5 ) with the ligand pyridine‐2‐thiolate (pyS^–) was also described. X‐ray crystallographic investigation of complex 3 has shown two four‐membered chelate rings (N, S donors) and one six‐membered ring (P, P donors) around the metal atom. Compound 5 provides the first example in which Ru^II has three four‐membered chelate rings: two made up by N, S donor ligands and one made up by P, P donor ligand. The arrangement around the metal atoms in each complex is distorted octahedral with cis:cis:trans:P, P:N, N:S, S dispositions of the donor atoms. The ³¹P NMR spectroscopic data revealed that the complexes are static in solution, except 2 , which showed the presence of more than one species.