Das erste Oxatetraphospholan, (PBut)4O

Contributions to the Chemistry of Phosphorus. 244. The First Oxatetraphospholane, (PBu^t)₄O Under suitable conditions, the reaction ot tri‐tertbutylcyclotriphosphane, (PBu^t)₃, with di‐tert‐butylperoxide gives rise to a mixture of 2,3,4,5‐tetra‐tert‐butyl‐1,2,3,4,5‐oxatetraphospholane, (PBu^t)₄O ( 1 ), and 1,2‐di‐tert‐butyl‐1,2‐di‐tert‐butoxidiphosphane, [Bu^t(Bu^tO)P]₂ ( 2 ). Both compounds have been isolated in the pure state. The oxatetraphospholane 1 is a constitutional isomer of 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, which has been reported recently [1]. The corresponding reaction of tetra‐tert‐butylcyclotetraphosphane furnishes only small amounts of 1 because of the kinetic stability of (PBu^t)₄. The diphosphane 2 is presumably a secondary product of primarily formed oxocyclotetraphosphanes (PBu^t)₄O_1–4. The NMR parameters of 1 and 2 are reported and discussed.     

Über die Oxo‐cyclotetraphosphane (PBut)4O1–4

Contributions to the Chemistry of Phosphorus. 243 On the Oxocyclotetraphosphanes (PBu^t)₄O_1–4 Under suitable conditions, the reaction of tetra‐tert‐butylcyclotetraphosphane, (PBu^t)₄, with dry atmospheric oxygen gives rise to the corresponding monoxide (PBu^t)₄O ( 1 ) which has been isolated by column chromatography. The reaction with hydrogen peroxide furnishes a mixture of oxocyclotetraphosphanes (PBu^t)₄O_1–4 consisting of two constitutionally isomeric dioxides (PBu^t)₄O₂ ( 2 a , 2 b ), the trioxide (PBu^t)₄O₃ ( 3 ), and the tetraoxide (PBu^t)₄O₄ ( 4 ), in addition to 1 . According to the ³¹P NMR parameters the oxygen atoms are exclusively exocyclically bonded to the phosphorus four‐membered ring. Which of the P atoms are present as λ⁵‐phosphorus follows from the different low‐field shifts of the individual P nuclei compared with the starting compound. Accordingly, 1 is 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, 2 a and 2 b are 1,2,3,4‐Tetra‐tert‐butyl‐1,2‐dioxo‐ and ‐1,3‐dioxocyclotetraphosphane, respectively, 3 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3‐trioxocyclotetraphosphane, and 4 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3,4‐tetraoxocyclotetraphosphane. When the oxidation reaction proceeds a fission of the P₄ ring takes place.     

Synthese der Silatetraphospholane (tBuP)4SiMe2, (tBuP)4SiCl2 und (tBuP)4Si(Cl)SiCl3 Molekül- und Kristallstruktur von (tBuP)4SiCl2

Synthesis of the Silatetraphospholanes (tBuP)₄SiMe₂, (tBuP)₄SiCl₂, and (tBuP)₄Si(Cl)SiCl₃ Molecular and Crystal Structure of (tBuP)₄SiCl₂ The reaction of the diphosphide K₂[(tBuP)₄] 7 with the halogenosilanes Me₂SiCl₂, SiCl₄ or Si₂Cl₆ in a molar ratio of 1:1 leads via a [4 + 1]-cyclocondensation reaction to the silatetraphospholanes (tBuP)₄SiMe₂ 1,1-dimethyl-1-sila-2,3,4,5-tetra-t-butyl-2,3,4,5-tetraphospholane, 1 , (tBuP)₄SiCl₂, 1,1-dichloro-1-sila-2,3,4,5-tetra-t-butyl-2,3,4,5-tetraphospholane, 2 , and (tBuP)₄Si(Cl)SiCl₃, 1-chloro-1-trichlorsilyl-1-sila-2,3,4,5-tetra-t-butyl-2,3,4,5-tetraphospholane, 3 , respectively, with the 5-membered P₄Si ring system. The reaction leading to 1 is accompanied with the formation of the by-product Me₂(Cl)-Si–(tBuP)₄–Si(Cl)Me₂ 1a (5:1), which has a chain structure. On warming to 100°C 1a decomposes to 1 and Me₂SiCl₂. The compounds 2 and 3 do not react further with an excess of 7 due to strong steric shielding of the ring Si atoms by the t-butyl groups. 1, 2 and 3 could be obtained in a pure form and characterized NMR spectroscopically; 2 was also characterized by a single crystal structure analysis. 1a was identified by NMR spectroscopy only.     

A series of (E)‐5‐(arylideneamino)‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitriles and their reduction products to secondary amines: syntheses and X‐ray structural studies

An efficent access to a series of N‐(pyrrol‐2‐yl)amines, namely (E)‐1‐tert‐butyl‐5‐[(4‐chlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₆ClN₃, (7a), (E)‐1‐tert‐butyl‐5‐[(2,4‐dichlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₅Cl₂N₃, (7b), (E)‐1‐tert‐butyl‐5‐[(pyridin‐4‐ylmethylene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₅H₁₆N₄, (7c), 1‐tert‐butyl‐5‐[(4‐chlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₈ClN₃, (8a), and 1‐tert‐butyl‐5‐[(2,4‐dichlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₇Cl₂N₃, (8b), by a two‐step synthesis sequence (solvent‐free condensation and reduction) starting from 5‐amino‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitrile is described. The syntheses proceed via isolated N‐(pyrrol‐2‐yl)imines, which are also key synthetic intermediates of other valuable compounds. The crystal structures of the reduced compounds showed a reduction in the symmetry compared with the corresponding precursors, viz. Pbcm to P from compound (7a) to (8a) and P2₁/c to P from compound (7b) to (8b), probably due to a severe change in the molecular conformations, resulting in the loss of planarity observed in the nonreduced compounds. In all of the crystals, the supramolecular assembly is controlled mainly by strong (N,C)—H…N hydrogen bonds. However, in the case of (7a)–(7c), C—H…Cl interactions are strong enough to help in the three‐dimensional architecture, as observed in Hirshfeld surface maps.     

Structural investigation of one‐ and two‐dimensional coordination polymers based on cobalt–bis(dioxolene) units and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane

The combination of cobalt, 3,5‐di‐tert‐butyldioxolene (3,5‐dbdiox) and 1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane (tpch) yields two coordination polymers with different connectivities, i.e. a one‐dimensional zigzag chain and a two‐dimensional sheet. Poly[[bis(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)bis(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)[μ₄‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]cobalt(III)]–ethanol–water 1/7/5], {[Co₂(C₁₄H₂₀O₂)₄(C₂₆H₂₄N₄O)]·7C₂H₅OH·5H₂O}_n or {[Co₂(3,5‐dbdiox)₄(tpch)}·7EtOH·5H₂O}_n, is the second structurally characterized example of a two‐dimensional coordination polymer based on linked {Co(3,5‐dbdiox)₂} units. Variable‐temperature single‐crystal X‐ray diffraction studies suggest that catena‐poly[[[(3,5‐di‐tert‐butylbenzene‐1,2‐diolato)(1,5‐di‐tert‐butyl‐4‐oxocyclohexa‐2,5‐dien‐1‐yl‐3‐olato)cobalt(III)]‐μ‐1‐hydroxy‐1,2,4,5‐tetrakis(pyridin‐4‐yl)cyclohexane]–ethanol–water (1/1/5)], {[Co(C₁₄H₂₀O₂)₂(C₂₆H₂₄N₄O)]·C₂H₅OH·5H₂O}_n or {[Co(3,5‐dbdiox)₂(tpch)]·EtOH·5H₂O}_n, undergoes a temperature‐induced valence tautomeric interconversion.     

tert‐Butyl (6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxo‐1,2,5,6‐tetra­hydropyridine‐1‐carboxyl­ate and tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxopiperidine‐1‐carboxyl­ate

X‐ray studies reveal that tert‐butyl (6S)‐6‐iso­butyl‐2,4‐dioxo­piperidine‐1‐carboxyl­ate occurs in the 4‐enol form, viz. tert‐butyl (6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo‐1,2,5,6‐tetra­hydropyri­dine‐1‐carboxyl­ate, C₁₄H₂₃NO₄, when crystals are grown from a mixture of di­chloro­methane and pentane, and has an axial orientation of the iso­butyl side chain at the 6‐position of the piperidine ring. Reduction of the keto functionality leads predominantly to the corresponding β‐hydroxy­lated δ‐lactam, tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo­piperidine‐1‐car­boxyl­ate, C₁₄H₂₅NO₄, with a cis configuration of the 4‐hydroxy and 6‐iso­butyl groups. The two compounds show similar molecular packing driven by strong O—H⋯O=C hydrogen bonds, leading to infinite chains in the crystal structure.     

Amino‐ und halogenfunktionelle Siloxititane

Amino‐ and halofunctional Siloxititanes Amino‐di‐tert‐butylsilanol reacts with tetrabutoxititane in a molar ratio of 2:1 to give di‐n‐butoxi(bis(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (C₄H₉OSi(CMe₃)₂‐O)₂Ti(OC₄H₉)₂ ( 1 ), and lithium‐di‐tert‐butylchlorosilanolate in a molar ratio of 3:1 to give n‐butoxi(tris(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (H₉C₄OSi(CMe₃)₂‐O)₃TiOC₄H₉ ( 2 ). The amino‐di‐tert‐butylsilanol substitutes the four chloroatoms of TiCl₄ in the presence of triethylamine as HCl‐acceptor. The tetrakis(amino‐di‐tert‐butyl)siloxititane ( 3 ) is formed. The lithium salt of di‐tert‐butylfluorosilanol reacts with TiCl₄ in a molar ratio of 2:1 to give 1, 1, 3, 3‐tetra‐tert‐butyl‐1‐fluoro‐3‐trichlorotitoxi‐1, 3‐disiloxane, FSi(CMe₃)₂‐O‐Si(CMe₃)₂‐O‐TiCl₃ ( 4 ). In the reaction of di‐tert‐butyl‐chlorosilanol and TiCl₄, the anion [chlorosiloxi‐octa(tri‐μ²‐chlorotitanate)]^— ( 5 ) with protonated diethylether as counterion is obtained by using diethylether as HCl‐acceptor. The crystal structure determinations of 3 and 5 are reported.     

Reaction of Ketene Dithioacetals with Pyrazolylcarbohydrazide： Synthesis and Biological Activities of Ethyl 5-Amino-1-（5＇-methyl-1 ＇-t-butyl-4＇-pyrazolyl）carbonyl-3-methylthio-1 H-pyrazole-4-carboxylate

The title compound, C16H23N5O3S, ethyl 5-amino-1-(5‘-methyl-1‘-t-butyl-4‘-pyrazolyl)carbonyl-3-methylthio-1H-pyrazole-4-carboxylate (5) has been synthesized by the treatment of ethyl 2-cyano-3,3-dimethylthioacrylate with 1-t-butyl-5-methyl-4-hydrazinocarbonylpyrazole (4) in refluxed ethanol. The possible mechanism of the above reaction was also discussed. The results of biological test show that the title compound has fungicidal and plant growth regulation activities.     

The absolute configuration of (2S,4S)‐ and (2R,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde

The title enanti­omorphic compounds, C₁₆H₂₃NO₄S, have been obtained in an enanti­omerically pure form by crystallization from a diastereomeric mixture either of (2S,4S)‐ and (2R,4S)‐ or of (2R,4R)‐ and (2S,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde. These mixtures were prepared by an aziridination rearrangement process starting with (S)‐ or (R)‐2‐tert‐butyl‐5‐methyl‐4H‐1,3‐dioxine. The crystal structures indicate an envelope conformation of the oxazolidine moiety for both compounds.     

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopenten – Synthese und Reaktionen

2,2‐Difluor‐1,3‐diaza‐2‐sila‐cyclopentene – Synthesis and Reactions N,N′‐Di‐tert‐butyl‐1,4‐diaza‐1,3‐butadiene reacts with elemental lithium under reduction to give a dilithium salt, which forms with fluorosilanes the diazasilacyclopentenes 1 – 4 ; (HCNCMe₃)₂SiFR, R = F ( 1 ), Me ( 2 ), Me₃C ( 3 ), N(CMe₃)SiMe₃ ( 4 ). As by‐product in the synthesis of 1 , the tert‐butyl‐amino‐methylene‐tert‐butyliminomethine substituted compound 5 was isolated, R = N(CMe₃)‐CH₂‐CH = NCMe₃. 5 is formed in the reaction of 1 with the monolithium salt of the 1,4‐diaza‐1,3‐butadiene in an enamine‐imine‐tautomerism. 1 reacts with lithium amides to give (HCNCMe₃)₂SiFNHR, 6 – 12 , R = H ( 6 ), Me ( 7 ), Me₂CH ( 8 ), Me₃C ( 9 ), H₅C₆ ( 10 ), 2,6‐Me₂C₆H₃ ( 11 ), 2,6‐(Me₂CH)₂C₆H₃ ( 12 ). The reaction of 12 with LiNH‐2.6‐(Me₂CH)₂C₆H₃ leads to the formation of (HCNCMe₃)₂Si(NHR)₂, ( 13 ). In the presence of n‐BuLi, 12 forms a lithium salt which looses LiF in boiling toluene. Lithiated 12 adds this LiF and generates a spirocyclic tetramer with a central eight‐membered LiF‐ring ( 14 ), [(HCNCMe₃)₂Si(FLiFLiNR)]₄, R = 2,6‐(Me₂CH)₂C₆H₃. ClSiMe₃ reacts with lithiated 12 to yield the substitution product (HCNCMe₃)₂SiFN(SiMe₃) R, ( 15 ). The crystal structures of 1 , 5 , 6 , 9 , 11 , 13 , 14 are reported.     

The diastereoisomers methyl 5‐(S)‐[2‐(R)/(S)‐methoxycarbonyl)‐2,3,4,5‐tetrahydropyrrol‐1‐ylcarbonyl]‐1‐(4‐methylphenyl)‐4,5‐dihydropyrazole‐3‐carboxylate

The title diastereoisomers, methyl 5‐(S)‐[2‐(S)‐methoxy­carbonyl)‐2,3,4,5‐tetra­hydro­pyrrol‐1‐yl­carbonyl]‐1‐(4‐methyl­phenyl)‐4,5‐di­hydro­pyrazole‐3‐carboxyl­ate and methyl 5‐(S)‐[2‐(R)‐methoxycarbonyl)‐2,3,4,5‐tetrahydropyrrol‐1‐ylcarbonyl]‐1‐(4‐methyl­phenyl)‐4,5‐di­hydro­pyrazole‐3‐carboxylate, both C₁₉H₂₃N₃O₅, have been studied in two crystalline forms. The first form, methyl 5‐(S)‐[2‐(S)‐methoxy­carbonyl)‐2,3,4,5‐tetrahydropyrrol‐1‐ylcarbonyl]‐1‐(4‐methylphenyl)‐4,5‐di­hydro­pyrazole‐3‐carboxyl­ate–methyl 5‐(S)‐[2‐(R)‐methoxy­carbonyl)‐2,3,4,5‐tetra­hydro­pyrrol‐1‐yl­carbonyl]‐1‐(4‐methylphenyl)‐4,5‐dihydropyrazole‐3‐carboxylate (1/1), 2(S),5(S)‐C₁₉H₂₃N₃O₅·2(R),5(S)‐C₁₉H₂₃N₃O₅, contains both S,S and S,R isomers, while the second, methyl 5‐(S)‐[2‐(S)‐methoxycarbonyl)‐2,3,4,5‐tetrahydro­pyrrol‐1‐ylcarbonyl]‐1‐(4‐methyl­phenyl)‐4,5‐di­hydro­pyrazole‐3‐carboxyl­ate, 2(S),5(S)‐C₁₉H₂₃N₃O₅, is the pure S,S isomer. The S,S isomers in the two structures show very similar geometries, the maximum difference being about 15° on one torsion angle. The differences between the S,S and S,R isomers, apart from those due to the inversion of one chiral centre, are more remarkable, and are partially due to a possible rotational disorder of the 2‐­(methoxycarbonyl)tetrahydropyrrole group.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Four differently substituted 2‐aryl‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepines: hydrogen‐bonded structures in one,two and three dimensions

In (2RS,4SR)‐7‐chloro‐2‐exo‐(2‐chloro‐6‐fluorophenyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₆H₁₂Cl₂FNO, (I), molecules are linked into chains by a single C—H...π(arene) hydrogen bond. (2RS,4SR)‐2‐exo‐(2‐Chloro‐6‐fluorophenyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₆H₁₃ClFNO, (II), is isomorphous with compound (I) but not strictly isostructural with it, as the hydrogen‐bonded chains in (II) are linked into sheets by an aromatic π–π stacking interaction. The molecules of (2RS,4SR)‐7‐methyl‐2‐exo‐(4‐methylphenyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₈H₁₉NO, (III), are linked into sheets by a combination of C—H...N and C—H...π(arene) hydrogen bonds. (2S,4R)‐2‐exo‐(2‐Chlorophenyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₆H₁₄ClNO, (IV), crystallizes as a single enantiomer and the molecules are linked into a three‐dimensional framework structure by a combination of one C—H...O hydrogen bond and three C—H...π(arene) hydrogen bonds.     

Four (2,2′‐bipyridyl)(ferrocenyl)boronium derivatives

Crystal structures are reported for four (2,2′‐bipyridyl)(ferrocenyl)boronium derivatives, namely (2,2′‐bipyridyl)(ethenyl)(ferrocenyl)boronium hexafluoridophosphate, [Fe(C₅H₅)(C₁₇H₁₅BN₂)]PF₆, (Ib), (2,2′‐bipyridyl)(tert‐butylamino)(ferrocenyl)boronium bromide, [Fe(C₅H₅)(C₁₉H₂₂BN₃)]Br, (IIa), (2,2′‐bipyridyl)(ferrocenyl)(4‐methoxyphenylamino)boronium hexafluoridophosphate acetonitrile hemisolvate, [Fe(C₅H₅)(C₂₂H₂₀BN₃O)]PF₆·0.5CH₃CN, (IIIb), and 1,1′‐bis[(2,2′‐bipyridyl)(cyanomethyl)boronium]ferrocene bis(hexafluoridophosphate), [Fe(C₁₇H₁₄BN₃)₂](PF₆)₂, (IVb). The asymmetric unit of (IIIb) contains two independent cations with very similar conformations. The B atom has a distorted tetrahedral coordination in all four structures. The cyclopentadienyl rings of (Ib), (IIa) and (IIIb) are approximately eclipsed, while a bisecting conformation is found for (IVb). The N—H groups of (IIa) and (IIIb) are shielded by the ferrocenyl and tert‐butyl or phenyl groups and are therefore not involved in hydrogen bonding. The B—N(amine) bond lengths are shortened by delocalization of π‐electrons. In the cations with an amine substituent at boron, the B—N(bipyridyl) bonds are 0.035 (3) Å longer than in the cations with a methylene C atom bonded to boron. A similar lengthening of the B—N(bipyridyl) bonds is found in a survey of related cations with an oxy group attached to the B atom.     

2,4‐Disila‐1,3,5‐oxadiazin,Cyclodisilazan‐Carbonsäure‐silylamid und ‐silylester

The lithium salts of the Me₃Si‐ as well as Me₃Si‐ and Me₂SiF‐substituted Cyclotrisilazanes I and II react with tert‐butylacylchloride under ring contraction and formation of the cyclodisilazane‐silylester, Me₃SiN(SiMe₂–N)₂SiMe₂–O–CO–CMe₃ ( 1 ). The lithium salt of the fluorodi‐methylsilyl‐substituted cyclotrisilazan III forms with benzoylchloride primarily in the analogous reaction the carboxy‐silyl‐amide, Me₂SiF(N–SiMe₂)₂SiMe₂–NH–CO–C₆H₅⁺ ( 2 ), which can be converted with III and benzoylchloride into the cyclodisilazane‐silylester, Me₂SiF(NSiMe₂)₂SiMe₂–O–CO–C₆H₅, ( 3 ). A silylester substituted six‐membered disila‐oxadiazine ( 4 ) is the result of the reaction of the lithiated cyclotrisilazane, (Me₂SiNH)₂, (Me₂SiNLi) with tert‐butyl‐acylchloride. The reaction includes anionic ring contraction and can be rationilized by a process analogous to keto‐enol‐tautomerism. Dilithiated octamethyl‐cyclotetrasilazane, (Me₂SiNHMe₂SiNLi)₂, reacts with tert‐butyl‐acylchloride or benzoylchloride in a molar ratio 1:2 to yield symmetrically acylestersubstituted cyclodisilazanes, (RCO–O–SiMe₂–NSiMe₂)₂, R = C₆H₅ ( 5 ), CMe₃ ( 6 ). The reaction mechanisms are discussed and the crystal structures of 2 and 6 are reported.     

(R)‐(+)‐2,2′‐Bis­(di­phenyl­phosphinoyl)‐1,1′‐bi­naphthyl

The title compound, BINAP oxide, C₄₄H₃₂O₂P₂, (I), was synthesized by direct oxidation of (R)‐(+)‐2,2′‐bis­(di­phenyl­phosphino)‐1,1′‐bi­naphthyl (BINAP) with tert‐butyl hydro­peroxide in toluene solution. The angle between the naphthyl planes of the bi­naphthyl group is 94.17 (3)°.     

5‐Hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate: diastereoselectivity of the Mukaiyama crossed‐aldol‐type reaction

The title compounds, rac‐(1′R,2R)‐tert‐butyl 2‐(1′‐hydroxyethyl)‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₇H₂₀N₂O₆, (I), rac‐(1′S,2R)‐tert‐butyl 2‐[1′‐hydroxy‐3′‐(methoxycarbonyl)propyl]‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₂₀H₂₄N₂O₈, (II), and rac‐(1′S,2R)‐tert‐butyl 2‐(4′‐bromo‐1′‐hydroxybutyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₃H₂₀BrNO₄, (III), are 5‐hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydropyrrole‐1‐carboxylate. In all three compounds, the tert‐butoxycarbonyl (Boc) unit is orientated in the same manner with respect to the mean plane through the 2‐oxo‐2,5‐dihydro‐1H‐pyrrole ring. The hydroxyl substituent at one of the newly created chiral centres, which have relative R,R stereochemistry, is trans with respect to the oxo group of the pyrrole ring in (I), synthesized using acetaldehyde. When a larger aldehyde was used, as in compounds (II) and (III), the hydroxyl substituent was found to be cis with respect to the oxo group of the pyrrole ring. Here, the relative stereochemistry of the newly created chiral centres is R,S. In compound (I), O—H...O hydrogen bonding leads to an interesting hexagonal arrangement of symmetry‐related molecules. In (II) and (III), the hydroxyl groups are involved in bifurcated O—H...O hydrogen bonds, and centrosymmetric hydrogen‐bonded dimers are formed. The Mukaiyama crossed‐aldol‐type reaction was successful when using the 2‐nitrophenyl‐substituted hydroxypyrrole, or the unsubstituted hydroxypyrrole, and boron trifluoride diethyl ether as catalyst. The synthetic procedure leads to a syn configuration of the two newly created chiral centres in all three compounds.     

Seven 5‐benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazoles: unexpected isomorphisms,and hydrogen‐bonded supramolecular structures in zero,one and two dimensions

5‐Benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₃N₃, (I), and its 5‐[4‐(trifluoromethyl)benzyl]‐, C₂₁H₂₂F₃N₃, (III), and 5‐(4‐bromobenzyl)‐, C₂₀H₂₂BrN₃, (V), analogues, are isomorphous in the space group C2/c, but not strictly isostructural; molecules of (I) form hydrogen‐bonded chains, while those of (III) and (V) form hydrogen‐bonded sheets, albeit with slightly different architectures. Molecules of 3‐tert‐butyl‐5‐(4‐methylbenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₁H₂₅N₃, (II), are linked into hydrogen‐bonded dimers by a combination of N—H...π(arene) and C—H...π(arene) hydrogen bonds, while those of 3‐tert‐butyl‐5‐(4‐chlorobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂ClN₃, (IV), form hydrogen‐bonded chains of rings which are themselves linked into sheets by an aromatic π–π stacking interaction. Simple hydrogen‐bonded chains built from a single N—H...O hydrogen bond are formed in 3‐tert‐butyl‐5‐(4‐nitrobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂N₄O₂, (VI), while in 3‐tert‐butyl‐5‐(3,4,5‐trimethoxybenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₃H₂₉N₃O₃, (VII), which crystallizes with Z′ = 2 in the space group P, pairs of molecules are linked into two independent centrosymmetric dimers, one generated by a three‐centre N—H...(O)₂ hydrogen bond and the other by a two‐centre N—H...O hydrogen bond.     

Two related lithium calixarene complexes, [p‐tert‐butylcalix[4]arene(OMe)(OH)2(OLi)]2·4MeCN and {p‐tert‐butylcalix[4]arene(OH)2(OLi)[OLi(NCMe)2]}2·8MeCN,determined using synchrotron radiation

The crystal structures of acetonitrile solvates of two related lithium calixarene complexes have been determined by low‐temperature single‐crystal X‐ray diffraction using synchrotron radiation. Bis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25‐methoxy‐27‐oxidocalix[4]arene)dilithium(I) acetonitrile tetrasolvate, [Li₂(C₄₅H₅₇O₄)₂]·4C₂H₃N or [p‐tert‐butylcalix[4]arene(OMe)(OH)₂(OLi)]₂·4MeCN, (I), crystallizes with the complex across a centre of symmetry and with four molecules of unbound acetonitrile of crystallization per complex. Tetraacetonitrilebis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25,27‐dioxidocalix[4]arene)tetralithium(I) acetonitrile octasolvate, [Li₄(C₄₄H₅₄O₄)₂(C₂H₃N)₄]·8C₂H₃N or {p‐tert‐butylcalix[4]arene(OH)₂(OLi)[OLi(NCMe)₂]}₂·8MeCN, (II), also crystallizes with the complex lying across a centre of symmetry and contains eight molecules of unbound acetonitrile per complex plus four more directly bound to two of the lithium ions, two on each ion. The cores of both complexes are partially supported by O—H...O hydrogen bonds. The methoxy methyl groups in (I) prevent the binding of any more than two Li⁺ ions, while the corresponding two O‐atom sites in (II) bind an extra Li⁺ ion each, making four in total. The calixarene cone adopts an undistorted cone conformation in (I), but an elliptical one in (II).     

Reaction of the Pincer‐type Ligand {2, 6‐[P(O)(OEt)2]2‐4‐tert‐Bu‐C6H2}— with [Ph3C]+[PF6]—. Unprecedented Rearrangement and Carbon‐Carbon Bond Formation

The reaction of the organolithium derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu‐C₆H₂}Li ( 1 ‐Li) with [Ph₃C]⁺[PF₆]^— gave the substituted biphenyl derivative 4‐[(C₆H₅)₂CH]‐4′‐[tert‐Bu]‐2′, 6′‐[P(O)(OEt)₂]₂‐1, 1′‐biphenyl ( 5 ) which was characterized by ¹H, ¹³C and ³¹P NMR spectroscopy and single crystal X‐ray analysis. Ab initio MO‐calculations reveal the intramolecular O···C distances in 5 of 2.952(4) and 2.988(5)Å being shorter than the sum of the van der Waals radii of oxygen and carbon to be the result of crystal packing effects. Also reported are the synthesis and structure of the bromine‐substituted derivative {2, 6‐[P(O)(OEt)₂]₂‐4‐tert‐Bu]C₆H₂}Br ( 9 ) and the structure of the protonated ligand 5‐tert‐Bu‐1, 3‐[P(O)(OEt)₂]₂C₆H₃ ( 1 ‐H). The structures of 1 ‐H, 5 , and 9 are compared with those of related metal‐substituted derivatives.