Photorecording in the “isotropic smectic phase” of dyed side chain polymers

The “isotropic smectic” phase of chiral side chain polymers combines layered liquid crystalline ordering with macroscopic transparency and low light scattering without any pretreatment, thus providing considerable advantages for photo-optical applications. Photoinduced birefringence in that mesophase of dye containing copolymers has been investigated. A novel LCPT (Light Controlled Phase Transition) photorecording technique has been developed. The light intensity required for the method is as low as 0.3 mW/cm², and both writing and reading of the image can be performed by nonpolarized light.     

NMR “Crystallography” for Uniformly (13C, 15N)‐Labeled Oriented Membrane Proteins

In oriented‐sample (OS) solid‐state NMR of membrane proteins, the angular‐dependent dipolar couplings and chemical shifts provide a direct input for structure calculations. However, so far only ¹H–¹⁵N dipolar couplings and ¹⁵N chemical shifts have been routinely assessed in oriented ¹⁵N‐labeled samples. The main obstacle for extending this technique to membrane proteins of arbitrary topology has remained in the lack of additional experimental restraints. We have developed a new experimental triple‐resonance NMR technique, which was applied to uniformly doubly (¹⁵N, ¹³C)‐labeled Pf1 coat protein in magnetically aligned DMPC/DHPC bicelles. The previously inaccessible ¹H_α–¹³C_α dipolar couplings have been measured, which make it possible to determine the torsion angles between the peptide planes without assuming α‐helical structure a priori. The fitting of three angular restraints per peptide plane and filtering by Rosetta scoring functions has yielded a consensus α‐helical transmembrane structure for Pf1 protein.     

Synthesis and characterization of the new 22-π aromatic furan-containing macrocycle, “ozaphyrin”

The new 22-π, aromatic “pentaplanar” macrocycle, ozaphyrin ( 6 ), has been synthesized by a McMurry coupling of 5,5′-diformyl-4,4′-dipropyl-2,2′-bipyrrole ( 1 ) with 2,5-bis(5-formyl-4-propyl-2-pyrrolyl)furan ( 5 ). This synthetic pathway to ozaphyrin and its characterization by ¹H nmr spectroscopy, uv-visible spectroscopy, cyclic voltammetry, and X-ray crystallography are described. The structure consists of layers of planar, staggered macrocycles stacked perpendicular to the α-axis. Ozaphyrin crystallizes with four formula units in the monoclinic space group C⁵_2h-P2₁/n in a cell of dimensions a = 10.481(7) Å, b = 17.353(17) Å, c = 18.726(12) Å, and β = 102.84(5)° (108 K). The structure has been refined on F² (5171 unique reflections, 411 variables) to R_w(F_o²) = 0.165. The conventional agreement index R(F) is 0.074 for the 3289 reflections have F_o²>2o(F_o²).     

From Packed “Sandwich” to “Russian Doll”: Assembly by Charge‐Transfer Interactions in Cucurbit[10]uril

As the host possessing the largest cavity in the cucurbit[n]uril (CB[n]) family, CB[10] has previously displayed unusual recognition and assembly properties with guests but much remains to be explored. Herein, we present the recognition properties of CB[10] toward a series of bipyridinium guests including the tetracationic cyclophane known as blue box along with electron‐rich guests and detail the influence of encapsulation on the charge‐transfer interactions between guests. For the mono‐bipyridinium guest (methylviologen, MV ²⁺), CB[10] not only forms 1:1 and 1:2 inclusion complexes, but also enhances the charge‐transfer interactions between methylviologen and dihydroxynaphthalene ( HN ) by mainly forming the 1:2:1 packed “sandwich” complex (CB[10] ? 2 MV ²⁺ ?HN ). For guest 1 with two bipyridinium units, an interesting conformational switching from linear to “U” shape is observed by adding catechol to the solution of CB[10] and the guest. For the tetracationic cyclophane‐blue box, CB[10] forms a stable 1:1 inclusion complex; the two bipyridinium units tilt inside the cavity of CB[10] according to the X‐ray crystal structure. Finally, a supramolecular “Russian doll” was built up by threading a guest through the cavities of both blue box and CB[10].     

Was ist „Molybdänsäure”︁ oder „Polymolybdänsäure”︁?

What is “Molybdic Acid” or “Polymolybdic Acid”? According to a comparative study of the literature, supplemented by well-aimed experimental investigations and equilibrium calculations, the terms “molybdic acid” or “polymolybdic acid”, used for many substances, species, or solutions in the literature, are applicable to a species, a solution, and two solids:

• a) The monomeric molybdic acid, most probably having the formula MoO₂(OH)₂(H₂O)₂(? H₂MoO₄, aq), exists in (aqueous) solution only and never exceeds a concentration of ≈ 10^?3 M since at higher concentrations it reacts with other monomemeric molybdenum (VI) species to give anionic or cationic polymers.
• b) A concentrated (>0.1 M Mo^VI) aqueous molybdate solution of degree of acidification P = 2 (realized, e. g., by a solution of one of the Mo^VI oxides; by any molybdate solutions whose cations have been exchanged by H₃O⁺ on a cation exchanger; by suitable acidification of a molybdate solution) contains 8 H₃O⁺ and the well-known polyanion Mo₃₆O₁₁₂(H₂O)₁₆^8? exactly in the stoichiometric proportions.
• c) A glassy substance, obtained from an alkali metal salt-free solution prepared according to (b), refers to the compound (H₃O)₈[Mo₃₆O₁₁₂(H₂O)₁₆]·xH₂O, x = 25—29.
• d) A solid having the ideal composition [(H₃O)Mo₅O₁₅(OH)H₂O·H₂O]∞ consists of a polymolybdate skeleton (the well-known ?decamolybdate”? structure), in the tunnels of which H₃O⁺ and H₂O are intercalate. The structure is very unstable if only H₃O⁺ cations are present, but it is enormously stabilized by a partial exchange of H₃O⁺ by certain alkali or alkaline earth metal cations.

For the compounds MoO₃, MoO₃·H₂O, and MoO₃·2H₂O the term ?molybdic acid”? is unjustified. The commercial product ?molybdic acid, ≈85% MoO₃”? is the well-known polymolybdate (NH₄)₂O·4 MoO₃ with a layer structure of the polyanion.     

Pyridinium‐Fused Pyridinone: A Novel “Turn‐on” Fluorescent Chemodosimeter for Cyanide

A new chemodosimeter based on pyridinium‐fused pyridinone iodide ( PI ) has been obtained through a “clean reaction” method. This compound can detect CN^? in aqueous solution with a high selectivity and rapid response. The detection of CN^? occurs through the nucleophilic attack of CN^? on the C?N bond, which induces the destruction of the π‐conjugation on the pyridinium ring. Support of this detection mechanism was obtained by ¹H NMR titration, HR‐MS, and DFT calculations. Upon the addition of 10 equivalents CN^? to a solution of PI in THF/H₂O (1:1, v/v), a 57‐fold enhancement in fluorescence intensity was observed at the maximum emission wavelength of 457 nm. Meanwhile, the maximum absorption wavelength was also blue‐shifted from 447 nm to 355 nm. Other common anions such as BF₄^?, PF₆^?, F^?, Cl^?, Br^?, I^?, H₂PO₄^?, ClO₄^?, CH₃COO^?, NO₂^?, N₃^?, and SCN^? had little effect on the detection of CN^?. The response time of PI for CN^? was less than 5 seconds. The detection limit was calculated to be 5.4×10^?8 M , which is lower than the maximum permission concentration in drinking water (1.9 μM ) set by the World Health Organization (WHO).     

“Surface-photografting”: new applications to synthetic fibers

“Surface-photografting” with UV-irradiation of polypropylene (PP) fiber and film and high-strength polyethylene (HSPE) yarn has been made with acrylic acid (AA) and acrylamide (AM) as monomers and benzophenone (BP), 4-chlorobenzophenone (4-BCP) and hydroxylcyclohexylacetophenone (HHA) as photoinitiators using a new continuous method. The grafting reaction occurs in a thin liquid layer on the fiber or film substrate, which is presoaked in a solution containing initiator and monomer. After irradiation with a highpressure mercury lamp, HPM 15 (2 kW) from Philips, for 5–20 sec at about 50°C the fiber and film surface is completely covered with a 2–8 nm thick layer of grafted polymer, analyzed by electron spectroscopy for chemical analysis. The grafting efficiency is 70–80%, i.e. only 20–30% of the polymer is homopolymer which can be removed by extraction. The grafted layers are so thin that they cannot be analyzed as weight increase (<0.1% of fiber weight). Absolute values for the amount of grafted AA polymer is analyzed by microtitration of the COOH groups at the fiber surface. The results agree well with the relative ESCA values. Grafting of commercial PP yarn with AA increases the adsorption of Crystal Violet dye with a factor of about 6. Grafting the same yarn with AM increases the adhesion to epoxy resin by a factor of 3–4 without affecting the mechanical properties of the fiber more than a few percent. For comparison, strips of blown PP film (5 mm wide) are modified by “surface-photografting” with AM. With increasing grafting, the contact angle for drops of distilled water decreases from 90° to 20°, indicating extensive wetting. The adhesion to epoxy resin increases from about 0.35 to 1.7 N/mm², i.e. with a factor of about 5 when the film surface is completely covered. Other comparisons are made with grafting of commercial HSPE yarn. Grafting with AA increases the adsorption of Crystal Violet dye by a factor of about 6. Grafting with AM increases the adhesion to epoxy resin from 0.25 to 1.3 N/nm², i.e. with a factor of 5. The bulk mechanical properties of the HSPE filaments are not affected by the grafting measured as tensile strength 2.7±0.1 GPa, elongation at break 4.8±0.3%, and Young's modulus 55±3 GPa, both before and after “surface-photografting”.     

Electrochemiluminescence of Supramolecular Nanorods and Their Application in the “On–Off–On” Detection of Copper Ions

In this work, an “on–off–on” switch system has been successfully applied through the construction of an electrochemiluminscent biosensor for copper ion (Cu²⁺) detection based on a new electrochemiluminescence (ECL) emitter of supramolecular nanorods, which was achieved through supramolecular interactions between 3,4,9,10‐perylenetetracarboxylic acid (PTCA) and aniline. The initial “signal‐on” state with strong and stable ECL emission was obtained by use of the supramolecular nanorods with a new signal amplification strategy involving a co‐reaction accelerator. In addition, ECL quencher probes (Fc‐NH₂/Cu‐Sub/nano‐Au) were fabricated by immobilizing aminoferrocene (Fc‐NH₂) on Cu‐substrate strand modified Au nanoparticles. The quencher probes were hybridized with the immobilized Cu‐enzyme strand to form Cu²⁺‐specific DNAzyme. Similarly, the “signal‐off” state was obtained by the high quenching effect of Fc‐NH₂ on the ECL of the excited‐state PTCA (¹PTCA*). As expected, the second “switch‐on” state could achieved by incubating with the target Cu²⁺, owing to the Cu²⁺‐specific DNAzyme, which was irreversibly cleaved, resulting in the release of the quencher probes from the sensor interface. Herein, on the basis of the ECL intensity changes (ΔI_ECL) before and after incubating with the target Cu²⁺, the prepared Cu²⁺‐specific DNAzyme‐based biosensor was used for the determination of Cu²⁺ concentrations with high sensitivity, excellent selectivity, and good regeneration.     

Copper‐Mediated Controlled/“Living” Radical Polymerization in Polar Solvents: Insights into Some Relevant Mechanistic Aspects

The field of transition‐metal‐mediated controlled/“living” radical polymerization (CLRP) has become the subject of intense discussion regarding the mechanism of this widely‐used and versatile process. Most mechanistic analyses (atom transfer radical polymerization (ATRP) vs. single‐electron transfer living radical polymerization (SET‐LRP)) have been based on model experiments, which cannot correctly mimic the true reaction conditions. We present, for the first time, a determination of the [Cu^IBr]/[L] (L=nitrogen‐based chelating ligand) ratio and the extent of Cu^IBr/L disproportionation during CLRP of methyl acrylate (MA) in dimethylsulfoxide (DMSO) with Cu⁰ wire as a transition‐metal catalyst source. The results suggest that Cu⁰ acts as a supplemental activator and reducing agent of Cu^IIBr₂/L to Cu^IBr/L. More importantly, the Cu^IBr/L species seem to be responsible for the activation of SET‐LRP.     

Applications of “Hot” and “Cold” Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using ⁶⁴CuATSM [copper (diacetyl‐bis(N4‐methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21^st century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in “cold” and “hot” Cu(II) and Ga(III) derivatives for PET applications and ¹¹¹In(III) derivatives for SPECT (single‐photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium‐based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.     

“Fragmentierung” und “Aggregation” bei Bleioxiden Über das Oligooxoplumbat(IV) K2Li6[Pb2O8]

“Fragmentation” and “Aggregation” on Lead Oxides. On the Oligooxoplumbate(IV) K₂Li₆[Pb₂O₈] For the first time, the dinuclear Oxoplumbate(IV) K₂Li₆[Pb₂O₈] has been prepared as transparent colourless single crystals by heating mixtures of K₂PbO₃, Li₂O, and “PbO₂” with K:Li:Pb = 1:3:1 e. g. [Ag-cylinders, sealed under vacuum in Supremax-glass ampoule, 660°C, 120 d]. The structure determination verifies the space group P1 with a = 6.9720(9), b = 5.9252(6), c = 5.9312(7) Å, α = 88.05(1)°, β = 107.94(1)°, γ = 107.30(1)°; d_x = 4.95 g · cm^?3, d_pyk = 4.91 g · cm^?3; Z = 1, [2107 symmetry independent hkl, fourcircle-diffractometer Philips PW 1100, ω—2Θ—scan, MoKα, R = 5.07%, R_w = 4.59%, absorption not considered]. The structure is characterized by the group [Pb₂O₈] — two edge connected (equatorial/apical) trigonal bipyramids — that is observed for the first time. Several ways of synthesis are given. The Madelung Part of Lattice Energy, MAPLE, Effective Coordination Numbers, ECoN, these via Mean Effective Ionic Radii, MEFIR, are calculated.     

A highly sensitive “test paper” for Hg2+ ions based on polyurethane membrane

Heavy metals have caused a lot of serious problems to human beings. A reusable, highly sensitive metal sensor based on polyurethane membrane, which can detect and remove Hg²⁺ ions, was prepared and tested in this work. A sensor with hydroxyl (?OH) group was grafted to polyurethane, and the heavy metal sensitive membrane was synthesized accordingly. Upon addition of Hg²⁺ ion solution to the as‐prepared membrane, the color change occurred instantly. Moreover, different colors appeared with different concentration of the Hg²⁺ ions, which could make the membrane be employed as a heavy metal “test paper”. In addition, the membrane sensor could be recycled after the interaction with Hg²⁺ ions by treating the used membrane with dilute ethylenediaminetetraacetic acid 2Na solution. This efficient and easily prepared membrane‐based sensor has a promising application in environmental science. Copyright © 2013 John Wiley & Sons, Ltd.     

A Nontrigonal Tricoordinate Phosphorus Ligand Exhibiting Reversible “Nonspectator” L/X‐Switching

We report here a “nonspectator” behavior for an unsupported L ‐function σ³‐P ligand (i.e. P{N[o‐NMe‐C₆H₄]₂}, 1a ) in complex with the cyclopentadienyliron dicarbonyl cation (Fp⁺). Treatment of 1a ?Fp⁺ with [(Me₂N)₃S][Me₃SiF₂] results in fluoride addition to the P‐center, giving the isolable crystalline fluorometallophosphorane 1a^F ?Fp that allows a crystallographic assessment of the variance in the Fe?P bond as a function of P‐coordination number. The nonspectator reactivity of 1a ?Fp⁺ is rationalized on the basis of electronic structure arguments and by comparison to trigonal analogue (Me₂N)₃P?Fp⁺ (i.e. 1b ?Fp⁺), which is inert to fluoride addition. These observations establish a nonspectator L/X‐switching in (σ³‐P)–M complexes by reversible access to higher‐coordinate phosphorus ligand fragments.     

“Photoclick” Postsynthetic Modification of DNA

A new DNA building block bearing a push–pull‐substituted diaryltetrazole linked to the 5‐position of 2′‐deoxyuridine through an aminopropynyl group was synthesized. The accordingly modified oligonucleotide allows postsynthetic labeling with a maleimide‐modified sulfo‐Cy3 dye, N‐methylmaleimide, and methylmethacrylate as dipolarophiles by irradiation at 365 nm (LED). The determined rate constant of (23±7) M ^?1 s^?1 is remarkably high with respect to other copper‐free bioorthogonal reactions and comparable with the copper‐catalyzed cycloaddition between azides and acetylenes.     

Highly Dynamic Coordination Behavior of Pn Ligand Complexes towards “Naked” Cu+ Cations

Reactions of Cu⁺ containing the weakly coordinating anion [Al{OC(CF₃)₃}₄]^? with the polyphosphorus complexes [{CpMo(CO)₂}₂(μ,η²:η²‐P₂)] ( A ), [CpM(CO)₂(η³‐P₃)] (M=Cr( B1 ), Mo ( B2 )), and [Cp*Fe(η⁵‐P₅)] ( C ) are presented. The X‐ray structures of the products revealed mononuclear ( 4 ) and dinuclear ( 1 , 2 , 3 ) Cu^I complexes, as well as the one‐dimensional coordination polymer ( 5 a ) containing an unprecedented [Cu₂( C )₃]²⁺ paddle‐wheel building block. All products are readily soluble in CH₂Cl₂ and exhibit fast dynamic coordination behavior in solution indicated by variable temperature ³¹P{¹H} NMR spectroscopy.     

Synthesis and clustering of supramolecular “graft” polymers

The synthesis and melt rheology of supramolecular poly(isobutylene) polymers bearing statistically distributed hydrogen‐bonding moieties is reported, aiming at understanding the formation of the underlying supramolecular networks for self‐healing polymers. Two different hydrogen bonds were incorporated into a poly(isobutylene) (PIB) copolymer, one based on a (weak) pyridinium/pyridine interaction, the other based on a (stronger) 2,6‐diaminotriazine/thymine interaction. A direct copolymerization based on living cationic polymerization of isobutene and the comonomers 1 , 2 , and 4 in amounts of 1 mol % lead to the copolymers PIB‐ 1 , PIB‐ 2 , and PIB‐ 4 with a content of ～1 mol % of comonomer and molecular weights ranging from ～2000 to 19,000 g mol^?1 (M_w/M_n ～ 1.2–1.5). Subsequent azide/alkyne “click” chemistry enabled the attachment of 2,6‐diaminotriazine‐ and thymine‐moieties to yield the copolymers PIB‐ 5 , PIB‐ 6 , and PIB‐ 7 . Proof of the statistical incorporation of ～1 mol % of hydrogen‐bonding moieties was achieved by ¹H NMR spectroscopy and matrix‐assisted laser desorption ionization measurements. The true presence of a supramolecular network in PIB‐ 1 (pyridinium/pyridine interaction) as well as with 1/1 blends of PIBs interacting via the 2,6‐diaminotriazine/thymine interaction (PIB‐ 5 /PIB‐ 6 ) was proven via the increasing plateau modulus with increasing molecular weights (5.5k, 9.9k, 12.4k, 16k, and 19k). Dynamics of the hydrogen bonds in the melt state was investigated by determining the effective cluster lifetime ( τ ) observing a clear difference in the (weaker) pyridinium/pyridine interaction ( τ ～ 1 s) to the 2,6‐ (stronger) diamintriazine/thymine interaction ( τ ～ 100 s). The so‐generated materials will be useful as a basis for self‐healing polymers, as dynamics plays a major role in such polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

“On‐Droplet” Chemistry: The Cycloaddition of Diethyl Azodicarboxylate and Quadricyclane

Sharpless and co‐workers previously studied the [2σ+2σ+2π] cycloaddition of diethyl azodicarboxylate (DEAD) and quadricyclane and reported that the addition of water to the neat reagents caused an acceleration in the reaction rate, giving birth to what has been called “on‐water” chemistry. We have examined the same reaction in aqueous microdroplets (ca. 5 μm diameter) and find that the cycloaddition reaction is accelerated even further (by a factor of 10²) compared to that of the “on‐water” reaction reported previously. The trends of acceleration in solvents other than water demonstrated by Sharpless and colleagues were replicated in the corresponding microdroplet experiments. We also find that DEAD reacts with itself to form a variety of hydrazine carboxylates and intercept intermediates of this reaction in microdroplets to validate a mechanism proposed herein. We suggest that “on‐droplet” chemistry, similar to “on‐water” chemistry, may be a general process of synthetic interest.     

Zusammensetzung und strukturelle Eigenschaften des „zweiwertigen”︁ Kobaltcyanids

The products obtained by mixing aqueous solutions of cobalt (II) chloride and potassium or hydrogen cyanide are nonstoichiometric compounds Co(CN)_x, yH₂O whith x between 2.2 and 2.4 and y between 1.75 and 2.15. They have a cubic face-centered unit cell with a = 10.20 ± 0.02 Å and Z between 6.8 and 7.1 (Z = number of units Co (CN)_x yH₂O per cell). Infrared spectra show that there is zeolitic as well as coordinated water present. The coordination units derived from reflectance spectra in the ultraviolet and visible region are (Co^III)C₆ and Co^IIN_6-xO_x. There exists a close structural relationship between Co(CN)_x, yH₂O and the stoichiometric compound Co₃[Co(CN)₆]₂, zH₂O. Comparison of calculated with experimental density shows that there must be holes in the threedimensional Co? C? N? Co-framework, which can be occupied by water molecules.     

Ruthenium Complex “Light Switches” that are Selective for Different G‐Quadruplex Structures

Recognition and regulation of G‐quadruplex nucleic acid structures is an important goal for the development of chemical tools and medicinal agents. The addition of a bromo‐substituent to the dipyridylphenazine (dppz) ligands in the photophysical “light switch”, [Ru(bpy)₂dppz]²⁺, and the photochemical “light switch”, [Ru(bpy)₂dmdppz]²⁺, creates compounds with increased selectivity for an intermolecular parallel G‐quadruplex and the mixed‐hybrid G‐quadruplex, respectively. When [Ru(bpy)₂dppz‐Br]²⁺ and [Ru(bpy)₂dmdppz‐Br]²⁺ are incubated with the G‐quadruplexes, they have a stabilizing effect on the DNA structures. Activation of [Ru(bpy)₂dmdppz‐Br]²⁺ with light results in covalent adduct formation with the DNA. These complexes demonstrate that subtle chemical modifications of Ru^II complexes can alter G‐quadruplex selectivity, and could be useful for the rational design of in vivo G‐quadruplex probes.