Novel polymer-supported β-diketonate nickel catalysts for α-olefin activation

Styrene–divinylbenzene resins were used for the synthesis of different polymer-bound β-diketones, obtained by anchoring the chelating group through either the central or the lateral position. The heterogenized diketone ligand was subsequently reacted with Ni(COD)₂ analogously to the corresponding homogeneous catalysts active in α-olefin oligomerization. The heterogenized catalysts showed a good activity only when the central position of the chelate moiety was free. Heterogenization caused a significant change of selectivity: olefin oligomerization was accompanied by the formation of a large amount of polymeric products. This behavior is discussed in terms of steric effects caused by the bulky polymeric ligand. © 1998 John Wiley & Sons, Ltd.     

Copolymerization of propylene with various higher α‐olefins using silica‐supported rac‐Me2Si(Ind)2ZrCl2

The copolymerization of propylene with 1‐hexene, 1‐octene, 1‐decene, and 1‐dodecene was carried out with silica‐supported rac‐Me₂Si(Ind)₂ZrCl₂ as a catalyst. The copolymerization activities of the homogeneous and supported catalysts and the microstructures of the resulting copolymers were compared. The activity of the supported catalyst was only one‐half to one‐eighth of that of the homogeneous catalyst, depending on the comonomer type. The supported catalyst copolymerized more comonomer into the polymer chain than the homogeneous catalyst at the same monomer feed ratio. Data of reactivity ratios showed that the depression in the activity of propylene instead of an enhancement in the activity of olefinic comonomer was responsible for this phenomenon. We also found that copolymerization with α‐olefins and supporting the metallocene on a carrier improved the stereoregularity and regioregularity of the copolymers. The melting temperature of all the copolymers decreased linearly with growing comonomer content, regardless of the comonomer type and catalyst system. Low mobility of the propagation chain in the supported catalyst was suggested as the reason for the different polymerization behaviors of the supported catalyst with the homogeneous system. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3294–3303, 2001     

The structure–activity relationship of some hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones

The study was focused on the structure–activity relationship of some newly synthesized hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones. These complexes were screened for their antibacterial activity against a Gram‐negative bacterium (Pseudomonas aeruginosa) and Gram‐positive bacteria (Streptomyces griseus, Staphylococcus aureus, Bacillus subtilis) and the results were compared with those of a standard antibacterial drug. Some of the complexes were also screened for their antifungal activity against various fungi (Aspergillus niger, A. flavus, Trichoderma viride, Fusarium oxysporum) and were found to be active. These new hexacoordinated complexes of dimethyltin(IV) were generated by reactions of dimethyltin(IV) dichloride and sodium salts of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones in 1:1:1 molar ratio in refluxing dry benzene. Plausible structures of these complexes were suggested with the aid of physicochemical and spectroscopic studies. ¹¹⁹Sn NMR spectral data revealed the presence of a hexacoordinated tin centre in these dimethyltin(IV) complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel nickel (II) complexes chelating β‐diketiminate ligands: synthesis and simultaneous polymerization and oligomerization of ethylene

Two novel nickel (II) complexes, CH{C(CF₃)NAr}₂NiBr ( 1 , Ar = 2,6‐ⁱPr₂C₆H₃ and 2 , 2,6‐Me₂C₆H₃), were synthesized by the reaction of the lithium salt of fluorinated β‐diketiminate backbone ligands with (1,2‐dimethoxyethane) nickel (II) bromide [(DME)NiBr₂]. The solid‐state structure of nickel (II) complex 2 as a dimer reveals four‐coordination and a tetrahedral geometry with bromide bridged by single crystal X‐ray measurement. Both complexes catalyze simultaneous polymerization and oligomerization of ethylene when activated by methylaluminoxane (MAO). It was found that the reaction temperature has a pronounced effect on the activity of ethylene polymerization and the molecular weight of obtained polyethylene. In addition, the nickel catalytic systems predominantly produce linear polyethylene with unsaturated end groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Co‐ and terpolymerization of ethylene,propylene, and higher α‐olefins with high propylene contents using metallocene catalysts

The copolymerization of propylene/ethylene and terpolymerization of propylene/ethylene/α‐olefins using long‐chain α‐olefins such as 1‐octene and 1‐decene have been carried out using EtInd₂ZrCl₂//methylaluminoxane. High concentrations of propylene and low concentrations of α‐olefins (near 2 mol % of the total olefin concentration in the liquid phase) were used. The effect of the ethylene concentration in copolymerizations of propylene/α‐olefins was studied at medium ethylene contents (12 and 40 mol % in the gas phase). The polymers were molecularly characterized by gel permeation chromatography‐multiangle laser light scattering, wide‐angle X‐ray scattering, Fourier transform infrared spectroscopy, and DSC analyses. The shorter α‐olefin studied (1‐octene) produced the highest improvement of activity in terpolymerization at 12 mol % ethylene in the gas phase. About 2 mol % of 1‐octene in the liquid phase increases the activity and decreases the molecular weight of terpolymers with respect to corresponding copolymers, whereas the mp is increased by almost 30 °C. The “termonomer effect” is less evident when higher amounts of ethylene are used. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1136–1148, 2001     

Synthesis of α,β‐Unsaturated Ketones and Esters Using Polymer‐supported Selenium Bromide

Treatment of the polymer‐supported α‐phenylseleno ketones and esters prepared from polymer‐supported selenium bromide with ketone and ester enolates with hydrogen peroxide afford α,β‐unsaturated ketones and esters in good yields and high purities.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Theoretical Study Of β2,3‐Peptide Models

Conformational features of α,β‐disubstituted β^2,3‐dipeptide models have been studied with quantum mechanics method. Geometries were optimized with the HF/6‐31G** method, and energies were evaluated with the B3LYP/6‐31G** method. Solvent effect was evaluated with the SCIPCM method. For (2S,3S)‐β^2,3‐dipeptide model 1 , a six‐membered‐ring hydrogen bonded structure is most stable. However, the conformation corresponding to the formation of the 14‐helix is only about 1.7 kcal/mol less stable in methanol solution, indicating that the 14‐helix is favored if a (2S,3S)‐β^2,3‐polypeptide contains more than 5 residues. On the other hand, the conformation corresponding to the formation of β‐sheet is most stable for (2R,3S)‐β^2,3‐dipeptide model 2 , suggesting that this type of β‐peptides is intrinsically favored for the formation of β‐sheet secondary structure.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Polymerization of β‐pinene with Schiff‐base nickel complexes catalyst: Synthesis of relatively high molecular weight poly(β‐pinene) at high temperature with high productivity

A series of easily accessible and stable Schiff‐base nickel complexes (complex 1 – 4 ) in conjunction with methylaluminoxane (MAO) were employed for the synthesis of relatively high molecular weight β‐pinene polymers at high temperature with high productivity. The ligand structure of the complex had a substantial effect on the polymerization in terms of the productivity and the molecular weight. With complex 4 in the presence of MAO, high molecular weight polymers of β‐pinene (M_n ～ 10,900) were obtained at 40 °C with an extremely high productivity up to 1.25 × 10⁷ g polyβ‐pinene/mol of Ni. ¹H NMR analyses showed that the obtained β‐pinene polymer was structurally identical to that formed by conventional cationic Lewis acid initiators. The polymerization was presumably initiated by the nickel cation formed by the reaction of the schiff‐base nickel complex and MAO, while the propagation proceeded in a manner typical for a conventional carbocationic polymerization process. Direct evidence for the carbocationic polymerization was offered by the fact that quenching of the polymerization with methanol at a low monomer conversion resulted in incorporation of a methoxyl end group into the polymer chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3739–3746, 2007     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

A Novel Method for the Synthesis of α,β‐Unsaturated Amides Mediated by Samarium Diiodide

Promoted by Samarium diiodide (SmI₂), α,β‐unsaturated amides were formed from nitrogen anions (formed in situ by the reduction of nitro compounds) and α,β‐unsaturated esters. This reaction contrasts with the conjugate addition between amines and α,β‐unsaturated esters promoted by samarium triiodide (SmI₃) and provides an alternative attractive way to obtain α,β‐unsaturated amides using SmI₂.     

Active center determinations on MgCl2‐supported fourth‐ and fifth‐generation Ziegler–Natta catalysts for propylene polymerization

Active center determinations on different Ziegler–Natta polypropylene catalysts, comprising MgCl₂, TiCl₄, and either a diether or a phthalate ester as internal donor, have been carried out by quenching propylene polymerization with tritiated ethanol, followed by radiochemical analysis of the resulting polymers. The purpose of this study was to determine the factors contributing to the high activities of the catalyst system MgCl₂/TiCl₄/diether—AlEt₃. Active center contents (C*) in the range 2–8% (of total Ti present) were measured and a strong correlation between catalyst activity and active center content was found, indicating that the high activity of the diether‐containing catalysts is due to an increased proportion of active centers rather than to a difference in propagation rate coefficients. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1635–1647, 2006     

Ethylene Oligomerization by 8—Aminoquinoline Nickel Dichloride Complex Supported on β—Cyclodextrin

IntroductionSincetheexcellentcapabilityoflatetransitionmetalcomplexesforolefinpolymerization ,wasdiscoveredbyBrookhart1andGibson2 ,theinterestinthesecatalystshasgreatlyincreasedinbothacademicandindustrialresearches.3Unfortunately,intheolefinpolymerizationprocessinitiatedbylatetransitionmetalcomplexes,thepolyolefinsproducedoftendepositatthereactorwallsandstirringdevice ,whichwillbedisadvantageoustothefurtherapplicationofthesecat alysts.Inordertoovercometheseproblems,theheteroge nizationoftheho…     

Palladium‐Catalyzed Carbonylative α‐Arylation to β‐Ketonitriles

A carbonylative α‐arylation process employing unactivated nitriles for the first time is described. The reaction tolerates a range of (hetero)aryl iodides and several nitrile coupling partners. No prefunctionalization of the nitriles is necessary and the resulting β‐ketonitriles are obtained in good to excellent yields. The methodology also allows for a convenient ¹³C‐labelling of the generated carbonyl moiety.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

TBAF‐Mediated Dimerization Reaction of β,γ‐Unsaturated Arylketones

A simple and high‐yield method for the synthesis of several 1,5‐diaryl‐1,5‐dicarbonyl compounds has been established starting from TBAF‐mediated isomerization and dimerization reaction of β,γ‐unsaturated arylketones (allyl arylketones) with mono‐, di‐, and tri‐methoxy groups, which is derived from allylation of commercially available different benzaldehydes and followed by oxidation of the resulting secondary alcohols.