Study of radical generated from coumarin dye-sensitized photo-initiator systems in high-speed photopolymer coating layers using laser flash photolysis

Radical generation from photoinitiation systems containing carbonylbiscoumarin dye with a radical-generating reagent, 3,3′-carbonylbis[7-(diethylamino)-2H-1-benzopyran-2-one] (KCD-DA), with 2,2′-bis(2-chloro-phenyl)-4,4′5,5′-tetraphenyl-1, 1′-bi-1H-imidazole (BI) in a poly(methyl methacrylate) film has been investigated by laser flash photolysis using a total reflection cell. Imidazolyl radical (Im·) was predominantly generated from carbonylbiscoumarin triplet-sensi-­tized decomposition of BI, the quantum yield, Φ^o_Im· of Im· at an infinite concentration of BI was measured, Φ^o_Im· = 1.3. The high quantum yield, Φ^o_Im·, implies an efficient KCD-DA triplet-sensitized photoinitiation system containing BI. Copyright © 1998 John Wiley & Sons, Ltd.     

Photosensitization mechanisms in photopolymer coating film containing photoinitiators sensitized by aminochalcone‐type dye for computer‐to‐photopolymer plate

Photosensitization mechanisms in photopolymer coating film containing an aminochalcone‐type dye sensitizer and a radical generating reagent, sensitizer dyes, (E)‐3‐(9‐julolidinyl)‐1‐phenyl‐2‐propen‐1‐one (A), (E)‐2‐(9‐julolidinyl)‐methylene‐1‐indanone (B), 9‐benzoyl‐2,3,6,7‐tetrahydro‐1H,5H‐benzo[i,j]‐furano‐[3,2‐g]quinolizine (C), 4‐(dimethylamino) chalcone (D) and a radical‐generating reagent, 2,4,6‐tris (trichloromethyl)‐1,3,5‐triazine (TCT), were investigated by laser flash photolysis using a total reflection cell. Weak fluorescence and strong broad triplet absorption were detected. The fluorescence was statically quenched by TCT at quenching distances (R_f) of 15, 14, 20 and 14 Å for A, B, C and D as well as the triplet initial absorption, at quenching distances (R_t) of 16, 16, 16 and 14 for A, B, C and D, similar to the fluorescence quenching distances. The triplet decay time of the dyes was inefficiently quenched by TCT with the rate constants (k _q) of 1.9, 3.1, 0.7 and 1.0×10⁵ mol⁻¹/dm³/s for A, B, C and D. The sensitivity of photopolymers containing a sensitizer dye and a TCT was obtained at an excitation of 488 nm corresponding to the emission peaks of argon ion laser of 1.1, 0.2, 0.54 and 9.1 mJ cm² for A, B, C and D. The results indicated that the static sensitization process from the fluorescent singlet excited state of the dyes to the ground state of TCT was predominant, and the high sensitivity for A and B was caused by the high absorbance at 488 nm and that for C by the high fluorescent quenching distance. Copyright © 1999 John Wiley & Sons, Ltd.     

The cyanine dye/trichloromethyl‐1,3,5‐triazine/thiols in two‐ and three‐component photoinitiating systems for free radical polymerization

The new photoinitiating systems for free radical polymerization of multifunctional monomers composed of carbocyanine dye, 1,3,5‐triazine derivative and heteroaromatic mercaptan were described. It was shown, that the polymerization abilities of such photoinitiatng systems are comparable with those observed for well‐known cyanine borate two‐component photoinitiating systems. The fluorescence quenching rate constants of tested sensitizer was about 2 × 10¹⁰ M^?1s^?1. Basing on the results of laser flash photolysis, the mechanism of the photochemical reactions occuring in the three‐component photoinitiating system was proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4243–4251, 2010     

Sensitization mechanisms from excited‐singlet state of pyrromethene dye to a radical‐generating reagent in a poly(methylmethacrylate) film

The sensitization mechanisms of a pyrromethene dye with a radical‐generating reagent, 3,5,3′,5′‐tetramethylpyrromethene‐BF₂ (BH) with 3,3′,4,4′‐tetrakis(t‐butyldioxycarbonyl)benzophenone (BP), in a poly‐ (methylmethacrylate) (PMMA) film were investigated by laser flash phoptolysis using a total reflection cell and single photon counting. From the laser flash photolysis, strong fluorescence was detected though no transient absorption was detected. The fluorescence intensity was significantly decreased with increasing concentration of BP, apparently exhibiting Perrin‐type static quenching at a quenching radius, R_f = 26 Å. From the examination of decay profile using single photon counting, logarithmic plots of fluorescence decay in a PMMA film afforded a nonlinear, convex reduction, corresponding to a streched exponential decay, while the logarithmic plots in acetonitrile showed a linear relationship. With increasing concentration of BH, the fluorescence maximum was shifted to red, and the intensity of fluorescence was significantly reduced. The red shift of fluorescence, the nonlinear fluorescence logarithmic decay and the large reduction in fluorescence indicate a dispersive photoexcited state and a relaxation of excitation energy hopping across an array of sites with Gaussian energy distribution. Moreover, after incorporating BP, the convex logarithmic plots became more steep, and the fluorescence maximum was also shifted to red, exhibiting a nonstatic quenching process competitive to the excitation energy hopping. Thus the sensitization of photoinitiator system containing BH and BP, whose contents were almost same as that in the commercial products, was due to a static quenching process from dispersive singlet excited BH to BP ground state, and the nonstatic quenching process competitive to the excitation energy hopping was minimal. Copyright © 1999 John Wiley & Sons, Ltd.     

TRIPLET EXCITATION TRANSFER INVOLVING β-IONONE. A KINETIC STUDY BY LASER FLASH PHOTOLYSIS

Abstract— Employing nanosecond laser flash photolysis, β-ionone (BI) has been examined as an acceptor and as a donor of triplet excitation. In the limit of diffusion-control as well as below it, the rate constants for the quenching of a series of sensitizer triplets by BI are2–3 times smaller than those by 2,4-hexadienal (HD), although the triplet energies (spectroscopic) of the two carbonyl-containing dienes are estimated to be the same (∼55 kcal mol^-1). We attribute the difference to a steric effect arising from ground-state geometric distortion and heavy alkyl-substitution in BI. In spite of possible exothermic energy transfer, BI triplet is nearly nonquenchable by azulene and ferrocene; this is explainable by torsional relaxation to an equilibrium geometry at which the vertical energy gap is smaller than 40 kcal mol^-1. The singlet oxygen yield from the interaction of BI triplet with oxygen in benzene is estimated to be 0.5, suggesting that spin-exchange and energy-transfer may be involved to the same extent in the oxygen quenching process.     

Photocatalytic Hydrogen Evolution with a Self‐Assembling Reductant–Sensitizer–Catalyst System

A noble‐metal‐free system for photochemical hydrogen production is described, based on ascorbic acid as sacrificial donor, aluminium pyridyl porphyrin as photosensitizer, and cobaloxime as catalyst. Although the aluminium porphyrin platform has docking sites for both the sacrificial donor and the catalyst, the resulting associated species are essentially inactive because of fast unimolecular reversible electron‐transfer quenching. Rather, the photochemically active species is the fraction of sensitizer present, in the aqueous/organic solvent used for hydrogen evolution, as free species. As shown by nanosecond laser flash photolysis experiments, its long‐lived triplet state reacts bimolecularly with the ascorbate donor, and the reduced sensitizer thus formed, subsequently reacts with the cobaloxime catalyst, thereby triggering the hydrogen evolution process. The performance is good, particularly in terms of turnover frequencies (TOF=10.8 or 3.6 min^?1, relative to the sensitizer or the catalyst, respectively) and the quantum yield (Φ=4.6 %, that is, 9.2 % of maximum possible value). At high sacrificial donor concentration, the maximum turnover number (TON=352 or 117, relative to the sensitizer or the catalyst, respectively) is eventually limited by hydrogenation of both sensitizer (chlorin formation) and catalyst.     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

Quenching of the triplet state of meso-substituted thiacarbocyanine dyes by nitroxyl radicals, iodide ions, and oxygen in solutions and in complexes with DNA

Using the flash photolysis method, the spectral and kinetic characteristics of triplet states of a number of meso-substituted thiacarbocyanine dyes (3,3′-diethyl-9-methoxythiacarbocyanine iodide, 3,3′,9-triethylthiacarbocyanine iodide, 3,3′-diethyl-9-methylthiacarbocyanine iodide, and 3,3′-diethyl-9-thiomethylthiacarbocyanine iodide) were studied, and the rate constants of triplet quenching by a stable nitroxyl radical, iodide ion, and oxygen were determined in solutions and in complexes with DNA. The results obtained show the formation of two types of dye-DNA complexes: formed by binding of the dye in the groove of a DNA molecule and by intercalation of the dye between base pairs. The complexation creates steric hindrances upon quenching of the triplet states of the ligands and causes great differences between the rate constants of the quenching processes.     

Triplet‐Sensitized Photodeprotection of Oligonucleotides in Solution and on Microarray Chips

Conditions and kinetics of triplet sensitization as a method for increasing the light sensitivity of photolabile protecting groups used for the photolithographic synthesis of oligonucleotide microarrays were quantitatively studied with the photolabile 2‐(2‐nitrophenyl)propyl protecting group in homogeneous solutions and on glass substrates by using laser flash photolysis, continuous illumination with HPLC analysis, fluorescence dye labelling, and hybridization. In terms of efficiency and avoidance of chemical side reactions, 9H‐thioxanthen‐9‐one was the most‐suitable sensitizer. Both in solution and on a glass substrate, the photostationary kinetics were quantitatively modelled and the relevant kinetic parameters determined. While the sensitization kinetics was diffusion‐controlled both in solution and on the chip, the photostationary kinetics was essentially of zero order only on the chip because here the triplet‐quenching effect of the released photoproduct 2‐(2‐nitrophenyl)propene was suppressed as a consequence of the inhomogeneous reaction that took place in a narrow diffusion zone above the surface from where the photoproducts could quickly escape. The kinetic simulation allowed quantitative estimate of the density of reactive groups on the surface. It was further demonstrated that, with 9H‐thioxanthen‐9‐one as a sensitizer, high‐density oligonucleotide microarrays of high quality can be produced with one‐third of the normal exposure time.     

BENZOPHENONE-SENSITIZED LIPID PEROXIDATION IN LINOLEATE MICELLES

Abstract— Benzophenone-photosensitized peroxidation in linoleic acid micelles (Type I reaction) has been investigated and quantum yields of both sensitizer photolysis and lipid peroxidation have been obtained. Benzophenone as well as its derivative, benzophenone-4'-heptyl-4-pentanoic acid (BHPA) have been utilized as sensitizers in this study. A quantum yield of 1.2 for hydroperoxide formation, compared with a benzophenone disappearance quantum yield of 0.41 (in the same linoleate micellar solution) was obtained; yields of 1.3 and 0.6 were found for comparable systems in which BHPA was the sensitizer. Although such data are consistent with the peroxidation mechanism of chain reaction, it is necessary to know the yields of initiating species to arrive at chain reaction lengths in these systems. Such yields have been determined by flash photolysis. The dependencies of sensitizer photolysis and hydroperoxide yields on linoleate concentration have also been determined in order to elucidate the effects of micelle formation or molecular organization on the peroxidative process. Additionally, for comparison in a saturated surfactant (lipid) system hydrogen abstraction was investigated by photolysis techniques in sodium dodecyl sulfate alone using these two sensitizers.     

Benzoin type photoinitiator for free radical polymerization

Benzoin, a popular photoinitiator for free radical polymerization of vinyl monomers, was improved by introduction of two methyl thioether substituents. This new benzoin derivative showed an about 50 times higher light absorption in the near‐UV spectral region and performed better than the unsubstituted benzoin in polymerization experiments in bulk solutions or films of acrylate monomers when low initiator concentrations are used. Laser flash photolysis, low temperature luminescence experiments and photoproduct studies by mass spectrometry suggest that a slow α‐cleavage mechanism (k_α = 2.2 × 10⁵ s^?1) from the electronic triplet state with a quantum yield of 0.1 is the primary photoreaction to generate the initiating free radicals. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

PHOTOPHYSICAL and PHOTOCHEMICAL PROPERTIES OF COUMARIN DYES IN AMPHIPHILIC MEDIA

Abstract— Photophysical properties of coumarin dyes solubilized in aqueous detergent solutions have been investigated including measurement of absorption and fluorescence emission maxima, and fluorescence quantum yields. Use of coumarin 4 as a fluorescence probe of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) solutions led to the conclusion that the sites for dye incorporation in micelles are significantly hydrogen-bonded (hydrated). The inhibition of photochemical decomposition for detergent-solubilizcd dyes has also been observed. Electron transfer from micelle-bound dye to a water soluble acceptor, methyl viologen, has been investigated by flash photolysis.     

THE IN VITRO PHOTOCHEMISTRY OF BIOLOGICAL MOLECULES-III. ABSORPTION SPECTRA, LIFETIMES AND RATES OF OXYGEN QUENCHING OF THE TRIPLET STATES OF β-CAROTENE, RETINAL AND RELATED POLYENES

Abstract— The triplet-triplet absorption spectra of six polyenes have been characterised using flash photolysis, in the presence of anthracene as sensitizer, and pulse radiolysis, in the absence of a sensitizer. The polyenes include several which contain carbonyl groups whose triplet states, unlike retinal , could not be detected unsensitized by flash photolysis. The triplet lifetimes appear to be a function of the number of conjugated double bonds, and vary between 7 and 14 μ sec. In general, the longer the polyene, the shorter the lifetime. An empirical linear relation was found between the frequencies of the polyene triplet-triplet absorption maxima, and the frequencies of the corresponding ground singlet-singlet maxima. The rate constants for quenching by oxygen of nine polyene triplet states were determined to lie in the range 2–7 × 10⁹ M ^-1 sec^-1. The possible mechanisms for oxygen quenching of triplet states are discussed and analogies between the results for oxygen quenching of polyenes and of polyacenes are drawn. The rate constant for oxygen quenching of all- trans -β-carotene triplet was the same in benzene and hexane.     

Synthesis and evaluation as a visible‐light polymerization photoinitiator of a new dye‐linked bis(trichloromethyl)‐1,3,5‐triazine

A dye‐linked initiator consisting of a merocyanine dye, which has an absorption maximum at 460 nm, and a substituted bis(trichloromethyl)‐1,3,5‐triazine initiator was prepared in order to achieve an efficient photopolymerization in a visible‐light region. The spectroscopic studies clearly showed that the dye‐linked initiator exhibit a marked increase in the efficiency of fluorescence quenching than a simple mixture of the dye/initiator. These results are reasonably explained in terms of the efficiency of electron transfer between the dye and the initiator. The relative photoinitiating efficiency of dye‐linked initiators in photopolymerization of acrylate monomers was evaluated and the results clearly indicated that the dye‐linked photoinitiator exhibited a marked increase in the photoinitiating efficiency of photopolymerization of acrylates compared to a simple mixture of the dye/initiator in photopolymer coatings particularly at a lower concentration of the initiator. This was explained in terms of the active quenching sphere of the dye/initiator system. Superior photosensitivity in the linked compound at a lower concentration indicates that this would be particularly useful as a visible‐light photoinitiator in holographic‐recording photopolymers. Copyright © 2004 John Wiley & Sons, Ltd.     

pH DEPENDENCE OF SINGLET OXYGEN PRODUCTION IN AQUEOUS SOLUTIONS USING THIAZINE DYES AS PHOTOSENSITIZERS

Abstract— The production of singlet oxygen by thiazine dye photosensitization, as measured by the rate of photooxidation of tryptophan, was found to be very sensitive to changes of pH in the range 5–9. For methylene blue in aerated solutions, the production of ¹O₂* is approximately five times more efficient in basic than in acidic medium. This was shown to be related to the p K 's of the triplet dyes, by evaluating the yields of ¹O₂* from the lifetimes and the quenching rate constants for the two ionic species of sensitizer triplets measured by laser flash photolysis. Changes in the quenching rate constants of the thiazine triplet states can be correlated with the triplet energies.     

Unambiguous evidence for the participation of singlet oxygen ( 1 ) in photodynamic oxidation of amino acids

Abstract— A variety of experimental tests have been applied to the methylene-blue-sensitized photooxidation of amino acids to distinguish between singlet oxygen and non-singlet oxidation mechanisms. Conventional flash photolysis and laser photolysis were used to measure the rate constants for the quenching of excited triplet sensitizer and singlet oxygen by the amino acids histidine. tryptophan and methionine and the nucleotide guanosine-5′-monophosphate. In the case of histidine, the rate constants alone rule out an oxidation mechanism involving direct reaction with excited dye. With the other amino acids, and with guanosine monophosphate, the oxidation rates might be accounted for by either mechanism. The inhibition of the photo-oxidation of both tryptophan and methionine as well as histidine by the singlet-oxygen quenchers N₃^? and tetramethylethylene suggests that these reactions occur via a singlet-oxygen mechanism. A newly developed test of singlet oxygen reactions involving a comparison of photooxidation rates in normal and perdeuterated solvents has been used to establish that the photooxidation of tryptophan proceeds primarily by a singlet-oxygen mechanism. These experiments appear to constitute the first proof that singlet oxygen is involved in the photooxidation of the three amino acids tryptophan, methionine and histidine.     

Quenching of photo-excited state of copolymer pendant Ru(bpy) complexes with methylviologen

Copolymer pendant tris(2,2′-bipyridine)ruthenium(II) complexes were prepared from the copolymers of 4-methyl-4′-vinyl-2,2′-bipyridine with styrene, acrylic acid, methyl methacrylate, hydroxyethyl methacrylate, acrylonitrile, N-vinylpyrrolidone, 4-vinylpyridine, and quaternized 4-vinylpyridine. The quenching of the photo-excited state of the polymer complexes by methylviologen was studied. Pendant anionic groups such as acrylate enhanced remarkably the quenching of the cationic sensitizer by the cationic substrate, however, pendant cationic groups such as quaternized pyridine did not affect the reaction. The polymer chain showed generally retarding effect on the quenching reaction.     

Excited states quenching of phenosafranine dye by electron donors

The quenching of the excited singlet and triplet states of phenosafranine by aromatic amines, methoxybenzenes and triethanolamine was investigated in acetonitrile and methanol. The rate constants for the aromatic quenchers present a typical dependence of an electron transfer process with the one-electron redox potential of the donor. A Rehm–Weller correlation is obtained with the driving force. The fitting parameters are very similar in both solvents. The electron transfer nature of the quenching reaction is further confirmed by the detection of the radical cations of the quenchers and the semireduced form of the dye in laser flash photolysis experiments. The absorption coefficients of the transient species were estimated, and the quantum yield of the charge separation process was determined.     

Role of Emissive and Non‐Emissive Complex Formations in Photoinduced Electron Transfer Reaction of CdTe Quantum Dots

Bimolecular photoinduced electron transfer (PET) from excited state CdTe quantum dot (QD*) to an electron deficient molecule 2,4‐dinitrotoluene (DNT) is studied in toluene. We observed two types of QD‐DNT complex formations; (i) non‐emissive complex, in which DNT is embedded deep inside the surface polymer layer of QD and (ii) emissive complex, in which DNT molecules are attached to QDs but approach to the QD core is shielded by polymer layer. Because of its non‐emissive nature, the lifetime of QD is not affected by dark complex formation, though the steady‐state emission is greatly quenched. However, emissive complex formation causes both, lifetime and steady‐state emission quenching. In our fitting model, consideration of Poisson distribution of the attached quencher (DNT) molecules at QD surface enables a comprehensive fitting to our time resolved data. QD‐DNT complex formation was confirmed by an isothermal titration calorimetry (ITC) study. Fitting to the time resolved data using a stochastic kinetic model shows moderate increase (0.05 ns^?1 to 0.072 ns^?1) of intrinsic quenching rate with increasing the QD particle size (from ≈3.2 nm to ≈5.2 nm). Our fitting also reveals that the number of DNT molecules attached to a single QD increases from ≈0.1–0.2 to ≈1.2–1.7, as the DNT concentration is increased from ≈1 mm to 17.5 mm . Complex formation at higher quencher concentration assures that the observed PET kinetics is a thermodynamically controlled process where solvent diffusion has no role on it.     

N‐alkoxypyridinium salts as coinitiators in radical polymerization: Synthesis and Photochemical Properties

A few N‐alkoxypyridinium salts are developed as photoinitiators for efficient polymerization reactions. They are characterized by absorption properties below 300 nm, and generate alkoxy radicals on UV‐Vis light exposure. The squarylium dye was used as a blue‐light photosensitizer. Polymerization results are correlated with the photochemistry of N‐alkoxypyridinium salts. The quenching of the excited singlet state of squarylium dye by pyridinium salt and the formation of the semioxidized species of squaraine suggests an electron transfer from an excited dye to a coinitiator, and that the resulting oxygen‐centered radical initiates the polymerization process. The chemical mechanism was investigated by steady state photolysis and nanosecond laser flash photolysis experiments. Photoinitiating activity of new photoinitiators for initiation of polymerization of trimethylolpropane triacrylate in the UV‐blue light region was compared with photoinitiating ability of selected commercially available initiators. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2840–2850