Synthesis of silylene-vinylene oligomers via catalytic polycondensation of divinyldimethylsilane

Acyclic diene polymerization (ADP) of divinyldimethylsilane in the presence of ruthenium RuCl₂(PPh₃)₃ and rhodium [RhCl(cod)]₂ catalysts led predominantly to linear silylene-vinylene oligomers (M_n = 1510 and M_w/M_n = 1.19) if the ruthenium catalyst was used or to mixture of cyclic and linear oligomers if rhodium complex was catalyst. © 1996 John Wiley & Sons, Inc.     

Synthesis of silylene–propenylene oligomers via catalytic polycondensation of diallyldiorganosilanes

Acyclic diene polycondensation (ADP) of diallyldiorganosilanes (CH₂CHCH₂)₂SiR₂ (where R = Me, Ph), in the presence of various ruthenium and rhodium complexes, led predominantly to linear silylene–propenylene oligomers. Ruthenium catalysts (e.g. RuCl₂(PPh₃)₃, RuHCl(CO)(PPh₃)₃, and RuCl(SiMe₃)(CO)(PPh₃)₂) were found to be more efficient than the rhodium ones. The reaction proceeds via preliminary catalytic isomerization of allylsilane to silyl-1-propenes followed by their oligococondensation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3299–3304, 1997     

Synthesis of oligoorganosilsesquioxanes via acidohydrolytic polycondensation

Methyl acrylate oligosilsesquioxanes based on γ-methacryloxypropyltrimethoxysilane and its mixtures with phenyltrimethoxysilane have been synthesized through acidohydrolytic polycondensation and studied via NMR spectroscopy and MALDI-TOF mass spectrometry. It is shown that the addition of the aforementioned oligosilsesquioxanes to a dental composition based on 2,2-bis[p-(3-metacryloyloxy-2-hydroxypropoxy)phenyl]propane and triethylene glycol dimethacrylate improves the mechanical characteristics of cured polymer composites.     

Synthesis of thermotropic liquid crystalline all-Trans-p-Phenylenevinylene oligomers via two-step metathesis

Liquid crystalline products of oligomeric p-phenylenevinylene derivates were prepared metathetically using a stable molybdenum carbene complex (Mo(NAr^Me₂)(CHCMe₂Ph)[OCMe(CF₃)₂]₂). The synthesis was conducted via two steps: 1. Metathesis polycondensation of 2, 5-dialkyl-1, 4-divinylbenzenes to oligo-(2, 5-dialkyl-1, 4-phenylenevinylene)s, 2. Endcapping of the vinyl groups via cross-metathesis using 3-hexene. The products were characterized by¹H-NMR and UV/Vis spectroscopy, as well as by DSC.     

Polyarylates. IV. Synthesis of block copolymers via two-step interfacial polycondensation

A new method for preparing block copolyarylates via two-step interfacial polycondensation is proposed. First, oligomers with acid chloride end groups were obtained from interfacial polycondensation with a mole ratio of bisphenol A to diacid chloride(s) less than I. In the second step, two reaction systems containing various oligomers were mixed thoroughly and more bisphenolate was charged into this mixture. The synthesis of the block copolyarylates was justified from the viewpoint of statistics, and of differences in molecular weight between oligomers and block copolymers. These block copolyarylates could be differentiated from polyarylates through crystal-line behavior and solubility in m-cresol analyses.     

Synthesis of soluble all-trans oligomers of 2,5-diheptyloxy-p-phenylenevinylene via olefin metathesis

In this paper we report on the synthesis of all-trans oligomers of 2,5-diheptyloxy-p-phenylenevinylene (2,5-diheptyloxy-PV) via olefin metathesis condensation of 2,5-diheptyloxy-1,4-divinylbenzene

1 The correct IUPAC name is 1,4-bis(heptyloxy)-2,5-divinylbenzene. The name 2,5-diheptyloxy-1,4-divinylbenzene is used in order to underline the structural similarity to 2,5-diheptyloxy-p-phenylenevinylene oligomers.

(2,5-diheptyloxy-DVB). The preparation of the monomer is also described. The Schrock type molybdenum alkylidene complex Mo(NPhMe₂)(CHCMe₂Ph)(OCMe[CF₃]₂)₂ was used as metathesis catalyst. The oligomer product obtained was characterized by means of ¹H NMR, IR and UV/Vis spectroscopy and gel permeation chromatography.     

Synthesis and characterization of biodegradable-cum-crosslinkable well-defined polyesters via chain-growth polycondensation in solid-liquid phase

Well-defined aliphatic polyesters, polyglycolide (PGA), polylactide (PLA) and their copolymers (PLGA) were prepared by chain-growth polycondensation of potassium 2-bromocarboxylates in solid-liquid phase. The polymerization proceeded in a living fashion without any side reactions. The degrees of polymerization (D_p) of polyesters was in agreement with the feed ratio of monomer to initiator. The polymer, which was only composed of heptamer, octamer and nonamer, possessed a narrow molecular weight distribution. Furthermore, the end groups of polymers, such as allyl and phenyl units, were directly yielded during the polymerization for the further modifying and crosslinking. The synthesized polyesters with allyl end groups were successfully crosslinked, and the products possessed biodegradability in phosphate buffer solution at 37 °C.     

季铵类离子液体催化熔融缩聚反应合成异山梨醇基聚碳酸酯

聚碳酸酯是一种性能优良的工程塑料,具有优异的透明性、绝缘性及无毒性等优点.目前实现大规模工业生产的是双酚A型聚碳酸酯,但是其生产原料双酚A具有毒性,限制了其应用.异山梨醇是一种生物基可再生单体,具有无毒、手性和刚性等特性,是双酚A的理想替代品.但是异山梨醇亲水性强,且羟基的活性低,导致碳酸二苯酯和异山梨醇通过熔融缩聚反应合成异山梨醇基聚碳酸酯(PIC)困难,因此选用合适的催化剂成为一个重要因素.目前报道的效果较好的催化剂是无机碱催化剂,这类催化剂催化活性差,容易引发副反应,在产品中残留影响产品质量.离子液体具有环境友好和阴阳离子可设计等优点,是无机碱催化剂的良好替代品.本文设计合成了六种季铵类的碱性离子液体(四乙铵二氰胺盐、四乙铵咪唑盐、四乙铵乳酸盐、四乙铵-1,2,4-三氮唑盐、四乙铵苯甲酸盐和四乙铵乙酸盐),用于催化熔融缩聚反应合成PIC.用核磁共振表征了PIC的结构,用凝胶色谱测定了PIC的分子量,通过对比PIC的重均分子量(Mw)和异山梨醇的转化率,研究了离子液体阴离子对催化剂活性的影响.发现催化活性不仅与离子液体的碱性强弱有关,还与离子液体阴离子的配位强度有关,催化效果最好的离子液体为四乙铵咪唑盐(TEAI).以TEAI为催化剂对合成PIC的条件进行了优化,得到的最优条件为:催化剂与异山梨醇的摩尔比为5×10-4,缩聚时间为5 h,缩聚温度为240 oC.合成PIC的Mw为25600 g/mol,异山梨醇的转化率为92%.由于均聚物PIC分子链刚性大,导致PIC熔体粘度大,不利于聚合,为了降低PIC的刚性和提高分子量,在分子链中引入了柔性基团(脂肪族二醇)来合成共聚碳酸酯(PAIC).以TEAI为催化剂,异山梨醇和脂肪族二醇投料摩尔比为1:1,通过熔融缩聚反应合成了PAICs.利用1H NMR和13C NMR详细表征了PAICs化学组成和微观结构,发现不同脂肪族二醇的羟基活性不同,合成的PAICs分子链中异山梨醇和脂肪族二醇的比例与投料比有所差异,得到的共聚物为无规共聚物.此外,对PAICs进行了凝胶色谱测试,发现PAICs的Mw与PIC相比均有所提高.通过差示扫描量热仪和热重分析仪对PIC和PAICs进行了热稳定性测试.结果表明,对于不同直链二醇制备的PAICs,随着二醇链中亚甲基数量的增加,其玻璃化转变温度(Tg)逐渐降低,但热稳定性逐渐提高;而对于用1,4-环己烷二甲醇合成的PCIC,其Tg值和热稳定性明显高于直链脂肪族二醇共聚物.这些性能为共聚碳酸酯用作高性能聚合材料提供了可能性.     

Synthesis of soluble,all-trans poly(2,5-diheptyl-p-phenylenevinylene) via metathesis polycondensation

The synthesis of substituted poly(p-phenylenenvinylene) (PPV) was carried out via metathesis polycondensation of 2,5-diheptyl-1,4-divinylbenzene (DHepDVB). A stable molybdenumcarbene complex served as catalyst. The preparation of the educt employed (DHepDPV, 3a ) is described. The obtained poly(2,5-diheptyl-1,4-phenylenevinylene) (DHepPPV, 5 ), an intensely yellow product, has an all-trans-configuration and, with a degree of polymerization of ≈ 10 is soluble in conventional organic solvents.     

Synthesis of methacrylate-containing oligosilsesquioxanes via acidic hydrolytic polycondensation in the medium of methacrylate monomers

Methacrylate-containing oligosilsesquioxanes with a molecular mass of 700–4000 are synthesized via the acidic hydrolytic polycondensation of γ-methacryloxy-propyltrimethoxysilane (A-174) in the medium of methyl methacrylate or in a mixture of bis(methacrylates). The structure of the oligomers is studied by ¹Н and ²⁹Si NMR spectroscopy and MALDI-TOF mass spectrometry.     

Synthesis of substituted naphthalenes via a catalytic ring-expansion rearrangement

A new methodology for the preparation of substituted naphthalenes starting from readily available indenones, organometal reagents, and trimethylsilyldiazomethane via a catalytic rearrangement process is described. Hindered biaryl naphthalenes, including triortho-substituted biaryls, can be accessed through our method. Our results are consistent with a mechanism involving a benzobenzvalene intermediate.     

Synthesis of ether oligomers

[structure: see text] Hydroxyaromatic aldehydes and ketones were used as building blocks to prepare ether oligomers. An iterative two-step protocol involving Mitsunobu coupling and carbonyl reduction provided a protecting-group-free route with high yields. Activity screening of an 84-member library against proteases led to the discovery of micromolar inhibitors for trypsin, chymotrypsin, and subtilisin.     

Synthesis of hydrolytically stable phosphorus-containing polymers via polycondensation and their utilization in polymer blends

Amorphous polyarylene ether homo- and copolymers were synthesized which were based upon bisphenol A and either 4, 4'-dichlorodiphenylsulfone, 4, 4'-difluorobenzophenone or 4, 4'-difluorodiphenyl phenylphosphine oxide. Solution blends were prepared from these homo- and copolymers with linear bisphenol A based polyhydroxyether, which was used as a model for the epoxy or vinyl ester thermosetting matrix resins for composite materials. It was observed that transparent, single Tg blends could be prepared from the phosphine oxide containing homopolymer and a 50/50 phosphine oxide/dichlorodiphenylsulfone copolymer. The other homopolymers produced materials with two Tg's, implying that they were definitely phase separated systems. Thermogravimetric analysis was also conducted and the phosphine oxide blends produced high char yields suggesting utilization in fire-resistant applications. The miscibility of the phosphine oxide material has been attributed to specific hydrogen bonding interactions observed between the phosphine oxide bond and the secondary hydroxyl group in the polyhydroxy ether. This hydroxyl functionality is also present in the epoxy and vinylester precursors and it is suggested that these materials could be utilized as interface sizings for carbon fibers, which would produce a graded microstructure between the fiber and the polymer matrix systems.     

Synthesis and polycondensation of difunctional tetraazacyclododecanes

We have developed a method for getting the tetraazacyclododecane structure into the backbone of a macromolecular chain. Two different reaction processes were investigated: polycondensation from diacid macrocycles using activation of the acid functions by thionyl chloride and polycondensation from diester macrocycles by aminolysis with different aliphatic diamines. Cyclic and linear oligomers have been obtained by polycondensation of 1,7-di(ethylacetate)-4,10-ditosyl-1,4,7,10-tetraazacyclododecane with ethylenediamine and dodecanediamine. In both cases, we managed to get oligomers containing several macrocycle units into their backbone. Furthermore, these results highlighted the classical problem of the competition between cyclisation and macromolecular chain formation encountered during polycondensation reactions.     

Synthesis of phthalocyanine dimers,trimers, and oligomers bridged via phenyl groups

Several phthalocyanine dimers, trimers, and oligomers bridged via aryl (phenyl) groups were prepared using the Suzuki–Miyaura cross coupling reaction of phthalocyanine-boronate ester and various halide derivatives under palladium catalyst reaction conditions. Photophysical data reveal energy transfer between the Pc moieties resulting in the appearance of new red-shifted Q-bands. The shift and the nature of Q-band depend on the number of phenyl groups, the number of Pc, and the position of attachment on the phenyl ring.     

Synthesis of ferrocenoyl amino acid derivatives via homogeneous catalytic aminocarbonylation

Palladium-catalysed aminocarbonylation of iodoferrocene with amino acid esters as nucleophiles results in the selective formation of N-ferrocenoyl amino acid esters in the presence of Et₃N as the base. At the same time, the use of DBU leads to the formation of new N-ferrocenylglyoxyl amino acid derivatives with reasonable selectivity. In the latter reactions two new side products, formed via acylation of DBU, were also isolated and characterised.     

Synthesis of electronically diverse tetraarylimidazolylidene carbenes via catalytic aldimine coupling

A new method for synthesizing symmetrical N-heterocyclic imidazolium salts is described. Catalytic coupling of aldimines with cyanide followed by oxidation gives alpha-diketimines, which can then be cyclized with formaldehyde in acidic media. This two-step procedure requires no chromatography and allows the synthesis of electronically diverse 1,3,4,5-tetraarylimidazolylidene carbenes.     

Synthesis of amphidinolide T1 via catalytic, stereoselective macrocyclization

Two nickel-catalyzed reductive coupling reactions of alkynes were instrumental in a modular, stereoselective synthesis of amphidinolide T1 (1). The C13-C21 fragment was prepared from two simple starting materials that were joined in a catalytic alkyne-epoxide fragment coupling operation, whereas an intramolecular aldehyde-alkyne reductive coupling simultaneously formed the final carbon-carbon bond of the macrocycle and established the C13 carbinol configuration with complete selectivity in the desired fashion.