Dodecahydro‐nido‐undecaborate [B11H12]3–

The deprotonation of the nido‐anion [B₁₁H₁₄]^– by two equivalents of LitBu yields the anion [B₁₁H₁₂]^3–. Three observed ¹¹B NMR shifts of this anion in the ratio 1 : 5 : 5 are in agreement with shifts calculated by the GIAO method on the basis of the ab initio computed geometry. The deprotonation can be reversed, giving back [B₁₁H₁₄]^– via [B₁₁H₁₃]^2–. The thermolysis of [Li(thp)_x]₃[B₁₁H₁₂] in thp at 80 °C leads to the closo‐borate [Li(thp)₃]₂[B₁₁H₁₁] under elimination of LiH. Anhydrous air transforms [B₁₁H₁₂]^3– into the known oxa‐nido‐dodecaborate [OB₁₁H₁₂]^–. The rhoda‐closo‐dodecaborate [L₂RhB₁₁H₁₁]^3– is formed from [B₁₁H₁₂]^3– and RhL₃Cl (L = PPh₃).     

Undecahalo‐closo‐undecaborates [B11Hal11]2–

The closo‐undecaborate A₂[B₁₁H₁₁] (A = NBzlEt₃) can be halogenated with excess N‐chlorosuccine imide, bromine or iodine, respectively, to give the perhalo‐closo‐undecaborates A₂[B₁₁Hal₁₁] (Hal = Cl, Br, I). The chlorination in the 11 : 1 ratio of the reagents yields A₂[B₁₁HCl₁₀], whose subsequent iodination makes A₂[B₁₁Cl₁₀I] available. The three type [B₁₁Hal₁₁]^2– anions show only one and the two type [B₁₁Cl₁₀X]^2– anions (X = H, I) only two ¹¹B NMR peaks in the ratio 10 : 1, thus exhibiting the same degenerate rearrangement of the octadecahedral B₁₁ skeleton as is well‐known for [B₁₁H₁₁]^2–. The crystal structure analysis of A₂[B₁₁Br₁₁] and A₂[B₁₁I₁₁] reveals a rigid octadecahedral skeleton in the solid state, up to 330 K, whose B–B bond lengths deviate more or less from the idealized C_2v gas phase structure, but are in good accordance with the distances of A₂[B₁₁H₁₁]. Electrochemical experiments elucidate the mechanism of the known oxidation of [B₁₁H₁₁]^2– to give [B₂₂H₂₂]^2–: A first one‐electron transfer is followed by the dimerization of the [B₁₁H₁₁]^– monoanion, whereas neutral B₁₁H₁₁, a presumably most reactive species, does not play a role as an intermediate. The electrochemical oxidation of [B₁₁Hal₁₁]^2– anions also starts with a one‐electron transfer, which is perfectly reversible only in the case of Hal = Br. There is no electrochemical indication for the formation of [B₂₂Hal₂₂]^2–. The neutral species B₁₁Hal₁₁ should be a short‐lived, very reactive species.     

1‐Oxa‐nido‐dodecaborate [OB11H12]− from the Controlled Oxidation of the closo‐Borates [B11H11]2− and [B12H12]2−

The closo‐dodecaborate [B₁₂H₁₂]^2? is degraded at room temperature by oxygen in an acidic aqueous solution in the course of several weeks to give B(OH)₃. The degradation is induced by Ag²⁺ ions, generated from Ag⁺ by the action of H₂S₂O₈. Oxa‐nido‐dodecaborate(1?) is an intermediate anion, that can be separated from the reaction mixture as [NBzlEt₃][OB₁₁H₁₂] after five days in a yield of 18 %. The action of FeCl₃ on the closo‐undecaborate [B₁₁H₁₁]^2? in an aqueous solution gives either [B₂₂H₂₂]^2? (by fusion) or nido‐B₁₁H₁₃(OH)^? (by protonation and hydration), depending on the concentration of FeCl₃. In acetonitrile, however, [B₁₁H₁₁]^2? is transformed into [OB₁₁H₁₂]^? by Fe³⁺ and oxygen. The radical anions [B₁₂H₁₂] ^{˙ ?} and [B₁₁H₁₁] ^{˙ ?} are assumed to be the primary products of the oxidation with the one‐electron oxidants Ag²⁺ and Fe³⁺, respectively. These radical anions are subsequently transformed into [OB₁₁H₁₂]^? by oxygen. The crystal structure analysis shows that the structure of [OB₁₁H₁₂]^? is derived from the hypothetical closo‐oxaborane OB₁₂H₁₂ by removal of the B3 vertex, leaving a non‐planar pentagonal aperture with a three‐coordinate O vertex, as predicted by NMR spectra and theory.     

Functionalization of closo‐Borates via Iodonium Zwitterions

A simple method for the functionalization of closo‐borates [closo‐B₁₀H₁₀]^2? ( 1 ), [closo‐1‐CB₉H₁₀]^? ( 2 ), [closo‐B₁₂H₁₂]^2? ( 3 ), [closo‐1‐CB₁₁H₁₂]^? ( 4 ), and [3,3′‐Co(1,2‐C₂B₉H₁₁)₂]^? ( 5 ) is described. Treatment of the anions and their derivatives with ArI(OAc)₂ gave aryliodonium zwitterions, which were sufficiently stable for chromatographic purification. The reactions of these zwitterions with nucleophiles provided facile access to pyridinium, sulfonium, thiol, carbonitrile, acetoxy, and amino derivatives. The synthetic results are augmented by mechanistic considerations.     

Strukturelle Untersuchungen an Cs2[B12H12]

Structural Investigations on Cs₂[B₁₂H₁₂] The crystal structure of Cs₂[B₁₂H₁₂] has been determined from X‐ray single‐crystal data collected at room temperature. Dicesium dodecahydro‐closo‐dodecaborate crystallizes as colourless, face‐rich crystals (cubic, Fm 3; a = 1128.12(7) pm; Z = 4). Its synthesis is based on the reaction of Na[BH₄] with BF₃(O(C₂H₅)₂) via the decomposition of Na[B₃H₈] in boiling diglyme, followed by subsequent separations, precipitations (with aqueous CsOH solution) and recrystallizations. The crystal structure is best described as anti‐CaF₂‐type arrangement with the Cs⁺ cations in all tetrahedral interstices of the cubic closest‐packed host lattice of the icosahedral [B₁₂H₁₂]^2–‐cluster dianions. The intramolecular bond lengths are in the range usually found in closo‐hydroborates: 178 pm for the B–B and 112 pm for the B–H distance. Twelve hydrogen atoms belonging to four [B₁₂H₁₂]^2– icosahedra provide an almost perfect cuboctahedral coordination sphere to the Cs⁺ cations, and their distance of 313 pm (12 ×) attests for the salt‐like character of Cs₂[B₁₂H₁₂] according to {(Cs⁺)₂([B₁₂H₁₂]^2–)}. The ¹¹B{¹H}‐NMR data in aqueous (D₂O) solution are δ = –12,70 ppm (¹J_B–H = 125 Hz), and δ = –15,7 ppm (linewidth: δν_1/2 = 295 Hz) for the solid state ¹¹B‐MAS‐NMR.     

1‐Amino‐2‐fluoromonocarba‐closo‐dodecaborates: K[1‐H2N‐2‐F‐closo‐1‐CB11H10] and [Et4N][1‐H2N‐2‐F‐closo‐1‐CB11I10]

The potassium salt of the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁H₁₀]^– anion ( 1 ) was obtained from an insertion reaction of Li₃[7‐H₂N‐nido‐7‐CB₁₀H₁₀] with BF₃ · OEt₂. Anion 1 was protonated to the neutral species 1‐H₃N‐2‐F‐closo‐1‐CB₁₁H₁₀ (H 1 ) and it was iodinated with ICl to the [1‐H₂N‐2‐F‐closo‐1‐CB₁₁I₁₀]^– anion ( 2 ). All species were characterized by multinuclear NMR, IR, and Raman spectroscopy as well as by elemental analysis. The structure of H 1· (CH₃)₂CO was studied by single‐crystal X‐ray diffraction and the experimentally determined bond lengths are compared to values derived from density functional calculations.     

Darstellung, 11B-, 13C-, 1H-NMR- und Schwingungsspektren von Monoethoxyhydro-closo-Dodecaborat(2–) sowie Kristallstruktur von [(C5H5N)2CH2][B12H11(OC2H5)]

Preparation, ¹¹B, ¹³C, ¹H NMR and Vibrational Spectra of Monoethoxyhydro-closo-dodecaborate(2–), and the Crystal Structure of [(C₅H₅N)₂CH₂][B₁₂H₁₁(OC₂H₅)] By treatment of Na₂[B₁₂H₁₂] with dry HF in ethanol Na₂[B₁₂H₁₁(OC₂H₅)] is formed which has been separated by ion exchange chromatography on diethylaminoethyl(DEAE) cellulose from the starting compound and by-products. The X-ray structure determination of [(C₅H₅N)₂CH₂][B₁₂H₁₁(OC₂H₅)] (monoclinic, space group P2₁/m, a = 9.1906(3), b = 12.6612(8), c = 9.3640(12) Å, β = 112.947(6)°, Z = 2) reveals the complete ordering of the anion sublattice. The ¹¹B nmr spectrum exhibits the characteristic feature (1:5:5:1) of a mono substituted B₁₂ cage with a strong down-field shift of ipso-B at +6.5 ppm. In the ¹³C nmr spectrum a triplet at 67.9 ppm of the methylene group and a quartet at 19.5 ppm of the methyl group is observed. Correspondingly, the ¹H nmr spectrum shows two multiplets at 3.7 and 1.3 as expected for an ethoxy substituent, and a multiplet at 2.1 ppm due to the protons of the boron cluster. The i.r. and Raman spectra exhibit strong CH stretching vibrations between 2 963 and 2 863 cm^?1, and in the i.r. spectrum the CO and BO stretching frequencies of the B? O? C bridge are observed at 1 175 and 1 140 cm^?1.     

Dodecahydro‐closo‐undecaborate [B11H12]–

DFT‐calculations of the geometries of the closo‐anion [B₁₁H₁₁]^2– in its ground state and in the transition state of its skeletal rearrangement and of the protonated species [B₁₁H₁₂]^– in its ground state were performed at the B3LYP/6‐31++G(d,p) level. The corresponding NMR shifts were computed on the basis of the optimized geometry by the GIAO method at the same level. Calculated and observed NMR data are in good agreement and thus prove the structure of [B₁₁H₁₂]^–, previously deduced from 2 D‐NMR spectra. The addition of water, ethanol, and pyridine to [B₁₁H₁₂]^– at low temperature gave the nido‐species [B₁₁H₁₃(OH)]^–, [B₁₁H₁₃(OEt)]^–, and [B₁₁H₁₂(py)]^–, respectively. The structures of these anions were investigated by NMR methods and the last two of them by crystal structure analyses of appropriate salts. The course of the addition reactions can be rationalized on the basis of the structurally characterized reaction components.     

The effect of molecular polarity on nem/catic phase stability in 12-vertex carboranes

Weakly polar–polar isosteric pairs of 12-vertex p-carborane [closo-1,12-C₂B₁₀H₁₂] (1[12]) and monocarbaborate [closo-1-CB₁₁H₁₂]^? (2[12]) nematic liquid crystals, in which the difference in the calculated molecular dipole moment is 11.3 D, were synthesised, and the effect of the dipole moment on nematic phase stability was investigated. The trend observed for the 12-vertex series ([12]) was identical to that of the previously investigated 10-vertex series ([10]) containing [closo-1,10-C₂B₈H₁₀] (1[10]) and [closo-1-CB₉H₁₀]^? (2[10]): the uniform increase in the molecular dipole moment in the pairs of mesogens does not correspond to a uniform change in the clearing temperature, T_NI. This demonstrates the role of a remote substituent in modulating the intermolecular dipole–dipole interactions. The magnitude of such interactions was calculated (using density functional theory methods) for a pair of polar (2[12]d–2[12]d) and an analogous pair of weakly polar (1[12]d–1[12]d) molecules. All results for the 12-vertex series ([12]) were analysed relative to the 10-vertex analogues ([10]).     

Darstellung und Kristallstrukturen von [P(C6H5)4][1-(NH3)B10H9] und Cs[(NH3)B12H11] · 2CH3OH

Synthesis and Crystal Structures of [P(C₆H₅)₄][1-(NH₃)B₁₀H₉] and Cs[(NH₃)B₁₂H₁₁] · 2CH₃OH The reduction of [1-(NO₂)B₁₀H₉]^2? with aluminum in alkaline solution yields [1-(NH₃)B₁₀H₉]^? and by treatment of [B₁₂H₁₂]^2? with hydroxylamine-O-sulfonic acid [(NH₃)B₁₂H₁₁]^? is formed. The crystal structures of [P(C₆H₅)₄][1-(NH₃)B₁₀H₉] (triclinic, space group P1 , a = 7.491(2), b = 13.341(2), c = 14.235(1) Å, α = 68.127(9), β = 81.85(2), γ = 86.860(3)°, Z = 2) and Cs[(NH₃)B₁₂H₁₁] · 2CH₃OH (monoclinic, space group P2₁/n, a = 14.570(2), b = 7.796(1), c = 15.076(2) Å, β = 111.801(8)°, Z = 4) reveal for both compounds the bonding of an ammine substituent to the cluster anion.     

Synthese und Kristallstruktur von Cadmium‐Dodekahydro‐closo‐Dodekaborat‐Hexahydrat,Cd(H2O)6[B12H12]

Synthesis and Crystal Structure of Cadmium Dodecahydro closo‐Dodecaborate Hexahydrate, Cd(H₂O)₆[B₁₂H₁₂] Through neutralization of the aqueous free acid (H₃O)₂[B₁₂H₁₂] with cadmium carbonate (CdCO₃) and after isothermic evaporation of the resulting solution, colourless lath‐shaped single crystals of Cd(H₂O)₆[B₁₂H₁₂] are obtained. Cadmium dodecahydro closo‐dodecaborate hexahydrate crystallizes at room temperature in the monoclinic system (space group: C2/m) with the lattice constants a = 1413.42(9), b = 1439.57(9), c = 749.21(5) pm and β = 97.232(4)° (Z = 4). The crystal structure of Cd(H₂O)₆[B₁₂H₁₂] can be regarded as a monoclinic distortion variant of the CsCl‐type structure. Two crystallographically different [Cd(H₂O)₆]²⁺ octahedra (d(Cd–O) = 227–230 pm) are present which only differ in their relative orientation. The intramolecular bond lengths for the quasi‐icosahedral [B₁₂H₁₂]^2? cluster anions range in the intervals usually found for dodecahydro closo‐dodecaborates (d(B–B) = 177–179 pm, d(B–H) = 103–116 pm). The hydrogen atoms of the [B₁₂H₁₂]^2? clusters have no direct coordinative influence on the Cd²⁺ cations. Due to the fact that no “zeolitic” crystal water molecules are present, a stabilization of the lattice takes place mainly via the B–H^δ?···^+δH–O hydrogen bonds.     

3-Pyridylacetonitrile-ligated 11-vertex rhodathiaboranes: synthesis,characterization, and X-ray crystal structure

The reaction between the 11-vertex rhodathiaborane [8,8-(PPh₃)₂-nido-8,7-RhSB₉H₁₀] (1) and 3-pyridylacetonitrile affords the hydrorhodathiaborane [8,8,8-(PPh₃)₂H-9-(3-Py-CH₂CN)-nido-8,7-RhSB₉H₉] (2) in good yield. Treatment of this cluster with ethylene leads to the formation of red, [1,1-(PPh₃)(η²-C₂H₄)-3-(3-Py-CH₂CN)-closo-1,2-RhSB₉H₈] (3). Both 11-vertex polyhedral boron-based clusters have been characterized by multielement NMR spectroscopy. In addition, (3) has been analyzed by single-crystal X-ray diffraction analysis and is only the second ethylene-ligated metalla-heteroborane to be characterized in the solid state. The molecular structure of this cluster is based on an octadecahedron. In the crystal lattice, the individual clusters form layers supported by short edge-to-face π-interactions between the phenyl rings of neighboring molecules.     

Das Lanthan‐Dodekahydro‐closo‐Dodekaborat‐Hydrat [La(H2O)9]2[B12H12]3·15 H2O und sein Oxonium‐Chlorid‐Derivat [La(H2O)9](H3O)Cl2[B12H12]·H2O

The Lanthanum Dodecahydro‐closo‐Dodecaborate Hydrate [La(H₂O)₉]₂[B₁₂H₁₂]₃·15 H₂O and its Oxonium‐Chloride Derivative [La(H₂O)₉](H₃O)Cl₂[B₁₂H₁₂]·H₂O By neutralization of an aqueous solution of the free acid (H₃O)₂[B₁₂H₁₂] with basic La₂O₃ and after isothermic evaporation colourless, face‐rich single crystals of a water‐rich lanthanum(III) dodecahydro‐closo‐dodecaborate hydrate [La(H₂O)₉]₂[B₁₂H₁₂]₃·15 H₂O are isolated. The compound crystallizes in the trigonal system with the centrosymmetric space group (a = 1189.95(2), c = 7313.27(9) pm, c/a = 6.146; Z = 6; measuring temperature: 100 K). The crystal structure of [La(H₂O)₉]₂[B₁₂H₁₂]₃·15 H₂O can be characterized by two of each other independent, one into another posed motives of lattice components. The [B₁₂H₁₂]²⁻ anions (d(B–B) = 177–179 pm; d(B–H) = 105–116 pm) are arranged according to the samarium structure, while the La³⁺ cations are arranged according to the copper structure. The lanthanum cations are coordinated in first sphere by nine oxygen atoms from water molecules in form of a threecapped trigonal prism (d(La–O) = 251–262 pm). A coordinative influence of the [B₁₂H₁₂]²⁻ anions on La³⁺ has not been determined. Since “zeolitic” water of hydratation is also present, obviously the classical H–O^δ–···^+δH–O‐hydrogen bonds play a significant role in the stabilization of the crystal structure. During the conversion of an aqueous solution of (H₃O)₂[B₁₂H₁₂] with lanthanum trichloride an anion‐mixed salt with the composition [La(H₂O)₉](H₃O)Cl₂[B₁₂H₁₂]·H₂O is obtained. The compound crystallizes in the hexagonal system with the non‐centrosymmetric space group (a = 808.84(3), c = 2064.51(8) pm, c/a = 2.552; Z = 2; measuring temperature: 293 K). The crystal structure can be characterized as a layer‐like structure, in which [B₁₂H₁₂]²⁻ anions and H₃O⁺ cations alternate with layers of [La(H₂O)₉]³⁺ cations (d(La–O) = 252–260 pm) and Cl⁻ anions along [001]. The [B₁₂H₁₂]²⁻ (d(B–B) = 176–179 pm; d(B–H) = 104–113 pm) and Cl⁻ anions exhibit no coordinative influence on La³⁺. Hydrogen bonds are formed between the H₃O⁺ cations and [B₁₂H₁₂]²⁻ anions, also between the water molecules of [La(H₂O)₉]³⁺ and Cl⁻ anions, which contribute to the stabilization of the crystal structure.     

Two iso-closo 11-vertex ruthenaborane clusters with exo-polyhedral cyclization of para-iodobenzoate

The reaction of [RuCl₂(PPh₃)₃] and closo-[B₁₀H₁₀]^2? with p-IPhCOOH in CH₂Cl₂ solution affords two para-iodobenzoate exo-cyclized 11-vertex closo-ruthenaborane clusters [(PPh₃)(p-IPhCO₂)₂RuB₁₀H₈] (1) and [(PPh₃)₂ClRu(PPh₃)(p-IPhCO₂)RuB₁₀H₉]?···?CH₂Cl₂ (2) that have been characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectra and single-crystal X-ray diffraction analysis. Both clusters are based on a closo-type C _{2 v} 1?:?2?:?4?:?2?:?2 RuB₁₀ stack with the metal occupying the unique six-connected apical position. In 1, the metal center has three exo-polyhedral ligands: one triphenylphosphine and two native oxygen atoms of para-iodobenzoates. The other oxygen atoms of two para-iodobenzoates are additionally bonded to B(2) and B(3) atoms respectively, resulting in two exo-cyclic five-membered Ru–O–C–O–B rings and engendering a symmetrical conformation. For 2, the metal center also has three exo-polyhedral ligands, one triphenylphosphine and one para-iodobenzoate to form one exo-cyclic five-membered Ru–O–C–O–B ring. There is an additional exo-polyhedral ruthenium atom bonding to the {RuB₁₀} center via a {Ru–Ru} linkage and two {RuH _μ B} bridges resulting in one closo distorted exo-polyhedral Ru(1)–Ru(2)–B(2)–B(4) tetrahedron.     

Azametalla-closo-dodecaboranes

The azaborate K₂[nido-NB₁₀H₁₁] is gained from nido-NB₁₀H₁₃ and K[BHEt₃] in a 1:2 ratio. The anion [NB₁₀H₁₁]^2?, which is isoelectronic with [C₂B₉H₁₁]^2?, reacts with [{η⁶-(C₆R₆) · RuCl₂}₂] (R = H, Me), [{η⁵-(C₅Me₅)RhCl₂}₂], or [Ni(PPh₃)₂Cl₂] to give the azametalla-closo-dodecaboranes MNB₁₀H₁₁ with M = (C₆Me₆)Ru ( 2 ), (C₆H₆)Ru ( 3 ), (C₅Me₅)Rh ( 4 ), and (Ph₃P)₂Ni ( 5 ), respectively. The azametallaborane K[Co(NB₁₀H₁₁)₂] ( 6 ), which contains a sandwich-type coordinated Co atom, is formed from K₂[NB₁₀H₁₁] and CoCl₂. The structure of 2 · CH₂Cl₂ was determined by X-ray diffraction. The products 2 – 6 can be derived from the icosahedral anion [B₁₂H₁₂]^2? on replacing a BH^2? moiety by the isoelectronic nitrene NH and a BH moiety by the isolobal metal-complex fragment M. The N atom is six-coordinated in the cluster skeletons 2 – 6 .     

Zu den Kristallstrukturen der Übergangsmetall(II)‐Dodekahydro‐closo‐Dodekaborat‐Hydrate Cu(H2O)5,5[B12H12]·2,5 H2O und Zn(H2O)6[B12H12]·6 H2O

On the Crystal Structures of the Transition‐Metal(II) Dodecahydro‐closo‐Dodecaborate Hydrates Cu(H₂O)_5.5[B₁₂H₁₂]·2.5 H₂O and Zn(H₂O)₆[B₁₂H₁₂]·6 H₂O By neutralization of an aqueous solution of the free acid (H₃O)₂[B₁₂H₁₂] with basic copper(II) carbonate or zinc carbonate, blue lath‐shaped single crystals of the octahydrate Cu[B₁₂H₁₂]·8 H₂O (≡ Cu(H₂O)_5.5[B₁₂H₁₂]·2.5 H₂O) and colourless face‐rich single crystals of the dodecahydrate Zn[B₁₂H₁₂]·12 H₂O (≡ Zn(H₂O)₆[B₁₂H₁₂]·6 H₂O) could be isolated after isothermic evaporation. Copper(II) dodecahydro‐closo‐dodecaborate octahydrate crystallizes at room temperature in the monoclinic system with the non‐centrosymmetric space group Pm (Cu(H₂O)_5.5[B₁₂H₁₂]·2.5 H₂O: a = 768.23(5), b = 1434.48(9), c = 777.31(5) pm, β = 90.894(6)°; Z = 2), whereas zinc dodecahydro‐closo‐dodecaborate dodecahydrate crystallizes cubic in the likewise non‐centrosymmetric space group F23 (Zn(H₂O)₆[B₁₂H₁₂]·6 H₂O: a = 1637.43(9) pm; Z = 8). The crystal structure of Cu(H₂O)_5.5[B₁₂H₁₂]·2.5 H₂O can be described as a monoclinic distortion variant of the CsCl‐type arrangement. As characteristic feature the formation of isolated [Cu₂(H₂O)₁₁]⁴⁺ units as a condensate of two corner‐linked Jahn‐Teller distorted [Cu(H₂O)₆]²⁺ octahedra via an oxygen atom of crystal water can be considered. Since “zeolitic” water of hydratation is also present, obviously both classical H–O^δ?···^+δH–O and non‐classical B–H^δ?···^+δH–O hydrogen bonds play a significant role for the stabilization of the structure. A direct coordinative influence of the quasi‐icosahedral [B₁₂H₁₂]^2? anions on the Cu²⁺ cations has not been determined. The zinc compound Zn(H₂O)₆[B₁₂H₁₂]·6 H₂O crystallizes in a NaTl‐type related structure. Two crystallographically different [Zn(H₂O)₆]²⁺ octahedra are present, which only differ in their relative orientation within the packing of the [B₁₂H₁₂]^2? anions. The stabilization of the crystal structure takes place mainly via H–O^δ?···^+δH–O hydrogen bonds, since again the hydrogen atoms of the [B₁₂H₁₂]^2? anions have no direct coordinative influence on the Zn²⁺ cations.     

Structure,physicochemical properties,and reactivity of the [B<Subscript>9</Subscript>H<Subscript>9</Subscript>]<Superscript>2–</Superscript> anion

Data on the structure, properties, and reactivity of one of the least studied 3D aromatic clusters—nonahydro-closo-nonaborate anion [B₉H₉]^2–—have been systematized. It has been shown that the key aspects of its reactivity are related to structural flexibility, which essentially distinguishes the [B₉H₉]^2– anion from the higher representatives of closo-borate anions.     

A new method for the synthesis of metal complexes with <Emphasis Type="Italic">trans</Emphasis>-[B<Subscript>20</Subscript>H<Subscript>18</Subscript>]<Superscript>2–</Superscript> dianion

A new method has been proposed for the synthesis of transition metal complexes with the trans-[B₂₀H₁₈]^2– dianion from complexes with the closo-decaborate anion [B₁₀H₁₀]^2– without changing the cationic part of the complex. A cerium(IV) salt has been used as an oxidizing agent. Complexes [NiL₃][trans-B₂₀H₁₈] (L = Bipy, Phen) have been identified by elemental analysis and IR spectroscopy.     

Synthesis and Structure of 1,2-Diphenyl-1,2-disila-closo-dodecaborane(12), Reaction with [Zr(NMe2)4] and [Ta(NMe2)5]

Diphenyl-o-silaborane ( 1 ) can be obtained by sublimation as colourless crystalline material in a yield of 23%. The disilaborane 1 was characterized by NMR spectroscopy, mass spectrometry and X-ray structure analysis. The neutral closo cluster 1 reacts with [Zr(NMe₂)₄] or [Ta(NMe₂)₅] to give the dimethylamide adduct [(Me₂N)(PhSi)₂B₁₀H₁₀]^– of the disilaborane.     

N-arylammonio- and N-pyridinium-substituted derivatives of dodecahydro-closo-dodecaborate(2-)

We report two methods for preparing N-arylammonio, N-pyridyl and N-arylamino dodecaborates: heating of the tetrabutylammonium salt of dodecahydro-closo-dodecaborate(2-) with aryl and pyridyl amines, or nucleophilic attack of [closo-B₁₂H₁₁NH₂]²⁻ on a strongly deactivated aromatic system. With aryl amines we obtained [1-closo-B₁₂H₁₁N(R¹)₂C₆H₅]⁻ (R¹ = H, CH₃). With 4-(dimethylamino)pyridine, [1-closo-(B₁₂H₁₁NC₅H₄)-4-N(CH₃)₂]⁻, with a bond between the boron and the pyridinium nitrogen, was obtained. A presumable mechanism for this kind of reactions is reported. By nucleophilic substitution, two products, [1-closo-(B₁₂H₁₁NHC₆H₃)-3,4-(CN)₂]²⁻ and [1-closo-(B₁₂H₁₁NHC₆H₂)-2-(NO₂)-4,5-(CN)₂]²⁻, were formed with 4-nitrophthalonitrile and 1-chloro-2,4-dinitrobenzene gave [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻. For [1-closo-B₁₂H₁₁N(CH₃)₂C₆H₅]⁻ and [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻ single crystal X-ray structures were obtained.