Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Solution polymerization of polybenzimidazole

Polybenzimidazoles (PBI) are an important class of heterocyclic polymers that exhibit high thermal and oxidative stabilities. The two dominant polymerization methods used for the synthesis of PBI are the melt/solid polymerization route and solution polymerization using polyphosphoric acid as the solvent. Both methods have been widely used to produce high‐molecular weight PBI, but also highlight the obvious absence of a practical organic solution‐based method of polymerization. This current work explores the synthesis of high‐molecular weight meta‐PBI in N,N‐dimethyl acetamide (DMAc). Initially, model compound studies examined the reactivity of small molecules with various chemical functionalities that could be used to produce 2‐phenyl‐benzimidazole in high yield with minimal side reactions. ¹H NMR and FTIR studies indicated that benzimidazoles could be efficiently synthesized in DMAc by reaction of an o‐diamine and the bisulfite adduct of an aromatic aldehyde. Polymerizations were conducted at various polymer concentrations (2‐26 wt % polymer) using difunctional monomers to optimize reaction conditions in DMAc which resulted in the preparation of high‐molecular weight m‐PBI (inherent viscosities up to 1.3 dL g^?1). TGA and DSC confirmed that m‐PBI produced via this route has comparable properties to that of commercial m‐PBI. This method is advantageous in that it not only allows for high‐polymer concentrations of m‐PBI to be synthesized directly and efficiently, but can be applied to the synthesis of many PBI derivatives. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1795–1802     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

Conjugated Polyelectrolyte‐Induced Self‐Assembly of Alkynylplatinum(II) 2,6‐Bis(benzimidazol‐2′‐yl)pyridine Complexes

Water‐soluble cationic alkynylplatinum(II) 2,6‐bis(benzimidazol‐2′‐yl)pyridine (bzimpy) complexes have been demonstrated to undergo supramolecular assembly with anionic polyelectrolytes in aqueous buffer solution. Metal–metal‐to‐ligand charge transfer (MMLCT) absorptions and triplet MMLCT (³MMLCT) emissions have been found in UV/Vis absorption and emission spectra of the electrostatic assembly of the complexes with non‐conjugated polyelectrolytes, driven by Pt???Pt and π–π interactions among the complex molecules. Interestingly, the two‐component ensemble formed by [Pt(bzimpy‐Et){C?CC₆H₄(CH₂NMe₃‐4)}]Cl₂ ( 1 ) with para‐linked conjugated polyelectrolyte (CPE), PPE‐SO₃^?, shows significantly different photophysical properties from that of the ensemble formed by 1 with meta‐linked CPE, mPPE‐Ala. The helical conformation of mPPE‐Ala allows the formation of strong mPPE‐Ala– 1 aggregates with Pt???Pt, electrostatic, and π–π interactions, as revealed by the large Stern–Volmer constant at low concentrations of 1 . Together with the reasonably large Förster radius, large HOMO–LUMO gap and high triplet state energy of mPPE‐Ala to minimize both photo‐induced charge transfer (PCT) and Dexter triplet energy back‐transfer (TEBT) quenching of the emission of 1 , efficient Förster resonance energy transfer (FRET) from mPPE‐Ala to aggregated 1 molecules and strong ³MMLCT emission have been found, while the less strong PPE‐SO₃^?– 1 aggregates and probably more efficient PCT and Dexter TEBT quenching would account for the lack of ³MMLCT emission in the PPE‐SO₃^?– 1 ensemble.     

A phenylenevinylene‐thiophene‐phenyleneethynylene copolymer: synthesis,characterization, and photovoltaic properties

A phenylenevinylene‐thiophene‐phenyleneethynylene copolymer, poly{[1′,4′‐bis‐(thienyl‐vinyl)]‐2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene‐vinylene‐alt‐1,4‐dioctyloxyl‐phenyleneethynylene}(PTPPV‐ PPE), was synthesized by the Sonogashira Pd‐catalyzed cross‐coupling reaction. The copolymer possesses higher thermal decomposition temperature (T_d = 382°C) compared with poly{[1′,4′‐bis‐ (thienyl‐vinyl)]‐2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene‐vinylene} (PTPPV). The absorption and photoluminescence (PL) peaks of PTPPV‐PPE solution and solid film locate in between those of the homopolymers of PTPPV and poly(1,4‐dioctyloxyl‐phenyleneethynylene) (PPE), and closer to that of PTPPV. Photovoltaic cell was fabricated based on the blend of PTPPV‐PPE and PCBM with a weight ratio of 1:1. The primary result shows an open circuit voltage (V_oc) of 0.72 V which is higher than that of the PTPPV (0.67 V), and a power conversion efficiency (PCE) of 0.3% under the illumination of AM1.5, 100 mW/cm² which is much better than that of PPEs. Copyright © 2008 John Wiley & Sons, Ltd.     

Evidence for chain transfer in the atom transfer radical polymerization of butyl acrylate

Poly(butyl acrylate) (PBuA) of high molecular weight was synthesized by atom transfer radical polymerization (ATRP) in ethyl acetate. Whereas for low molecular weight polymers, a linear increase of the number‐average molecular weight, M_n, versus conversion and narrow molecular weight distributions indicate the suppression of side reactions, a downward curvature in the plot of M_n versus conversion was observed for high molecular weights (M_n > 50 000). This effect is explained by chain transfer reactions, leading to branched polymers. GPC measurements with a viscosity detector give evidence for the branched structure of high molecular weight polymers obtained in ATRP. In addition, transfer to solvent or monomer is likely to occur.     

Benzyl Bromide Functionalized Poly(Phenyleneethynylene)s as Macroinitiators in the Atom Transfer Radical Polymerization of Methyl Methacrylate

Abstract

The behavior of benzyl bromide functionalized poly(phenyleneethynylene)s as macroinitiators in the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated. The ¹H NMR observation of the ATRP using the exclusively para‐linked poly(phenyleneethynylene) macroinitiator PPE1A, and the low molecular weight initiator R‐BzBr, respectively, revealed lower reactivity for the macroinitiator. Comparison of graft copolymers, which were obtained from ATRP of MMA with PPE1A and the partially meta‐linked poly(phenyleneethynylene) PPE1B, showed higher reactivity in the case of PPE1B, expressed by a larger degree of polymerization in the PMMA side chains, as well as higher initiatior efficiency. This might be caused by better solubility of the less symmetric PPE1B. Investigation of the graft copolymers PPE2A and PPE2B was carried out by means of ¹H NMR spectroscopy, gel permeation chromatography (GPC) as well as UV/vis spectroscopy. Impairment of the delocalized π‐electron system of the conjugated polymers during the ATRP was not detectable.     

Negative‐type photosensitive poly(phenylene ether) based on poly(2,6‐dimethyl‐1,4‐phenylene ether), a crosslinker,and a photoacid generator

A negative‐type photosensitive poly(phenylene ether) (PSPPE) based on poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE), a novel crosslinker 4,4′‐methylene‐bis [2,6‐bis(methoxymethyl)phenol] (MBMP) having good compatibility with PPE, and diphenylidonium 9,10‐dimethoxy anthracene‐2‐sulfonate (DIAS) as a photoacid generator (PAG) has been developed. This resist consisting of PPE (73 wt %), MBMP (20 wt %) and DIAS (7 wt %) showed a high sensitivity (D_0.5) of 58 mJ/cm² and a contrast (γ_0.5) of 9.5 when it was exposed to i‐line (365 nm wavelength light), postexposure baked at 145 °C for 10 min, and developed with toluene at 25 °C. A fine negative image featuring 6 μm line‐and‐space pattern was obtained on the film exposed to 300 mJ/cm² of i‐line by a contact‐printed mode. The resulting polymer film cured at 300 °C for 1 h under nitrogen had a low dielectric constant (ε = 2.46) comparable to that of PPE and a higher T_g than that of PPE. In addition, the cured PSPPE film was pretty low water absorption (<0.05%) as same as PPE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4949–4958, 2008     

Anionic polymerization of 1,3‐cyclohexadiene with alkyllithium/amine system in an aromatic hydrocarbon solvent: Predominant formation of 1,2‐addition product

Steric hindrance of the amine strongly affected the formation of the dominant 1,2‐addition product from the anionic polymerization of 1,3‐cyclohexadiene (1,3‐CHD) initiated by the alkyllithium (RLi)/amine system in an aromatic hydrocarbon solvent. 1,2‐Cyclohexadiene (1,2‐CHD)/1,4‐cyclohexadiene (1,4‐CHD) unit molar ratios from 85/15 to 93/7 were obtained using an RLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA) system in toluene. The C? Li bonds of poly(1,3‐cyclohexadienyl)lithium (PCHDLi)/TMEDA complex in toluene appeared to be strongly polarized with small steric hindrance. Intermolecular forces contributing to the aggregation were strong for high‐molecular‐weight poly(1,3‐cyclohexadiene) (PCHD) consisting of almost all 1,2‐CHD units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6604–6611, 2008     

Synthesis and characterization of phthalazinone‐based poly(aryl ether ketone) derived from 4,4′‐dichlorobenzophenone

As distinguished from the conventional preparation of poly(aryl ether ketone)s utilizing 4,4′‐difluorobenzophenone, a novel synthetic method of high molecular weight poly(phthalazinone ether ketone) derived from 4,4′‐dichlorobenzophenone was studied. Reaction conditions to get high molecular weight polymer were investigated in details. Experimentally, sulfolane was chosen as the reaction media and high molecular weight polymer could be obtained in 7–8 hr at 210°C. The cyclic oligomers in the polymer product reduced to below 3.0% when the concentration of the reactant is 1.6–1.7 g/ml. Fourier transform infrared (FT‐IR), ¹H NMR, and elemental analysis were used to confirm the structure of the obtained polymer. The amorphous polymer showed reasonable solubility in selective solvent, such as chloroform and N‐methyl‐2‐pyrrolidone, and tough, flexible, and transparent thin film can be readily prepared from their N‐methyl‐2‐pyrrolidone solution. The obtained polymer showed high glass transition temperature (T_g) up to 261°C detected by differential scanning calorimetry (DSC), and the temperature of 5% weight loss under nitrogen higher than 500°C detected by thermal gravimetric analysis (TGA), indicating its excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Solvent‐Induced Helical Assembly and Reversible Chiroptical Switching of Chiral Cyclic‐Dipeptide‐Functionalized Naphthalenediimides

Understanding the roles of various parameters in orchestrating the preferential chiral molecular organization in supramolecular self‐assembly processes is of great significance in designing novel molecular functional systems. Cyclic dipeptide (CDP) chiral auxiliary‐functionalized naphthalenediimides (NCDPs 1 – 6 ) have been prepared and their chiral self‐assembly properties have been investigated. Detailed photophysical and circular dichroism (CD) studies have unveiled the crucial role of the solvent in the chiral aggregation of these NCDPs. NCDPs 1 – 3 form supramolecular helical assemblies and exhibit remarkable chiroptical switching behaviour (M‐ to P‐type) depending on the solvent composition of HFIP and DMSO. The strong influence of solvent composition on the supramolecular chirality of NCDPs has been further corroborated by concentration and solid‐state thin‐film CD studies. The chiroptical switching between supramolecular aggregates of opposite helicity (M and P) has been found to be reversible, and can be achieved through cycles of solvent removal and redissolution in solvent mixtures of specific composition. The control molecular systems (NCDPs 4 – 6 ), with an achiral or D ‐isomer second amino acid in the CDP auxiliary, did not show chiral aggregation properties. The substantial roles of hydrogen bonding and π–π interactions in the assembly of the NCDPs have been validated through nuclear magnetic resonance (NMR), photophysical, and computational studies. Quantum chemical calculations at the ab initio, semiempirical, and density functional theory levels have been performed on model systems to understand the stabilities of the right (P‐) and left (M‐) handed helical supramolecular assemblies and the nature of the intermolecular interactions. This study emphasizes the role of CDP chiral auxiliaries on the solvent‐induced helical assembly and reversible chiroptical switching of naphthalenediimides.     

Amphiphilic block and statistical copolymers with pendant glucose residues: Controlled synthesis by living cationic polymerization and the effect of copolymer architecture on their properties

Amphiphilic block and statistical copolymers of vinyl ethers (VEs) with pendant glucose residues were synthesized by the living cationic polymerization of isobutyl VE (IBVE) and a VE carrying 1,2:5,6‐di‐O‐isopropylidene‐D ‐glucose (IpGlcVE), followed by deprotection. The block copolymer was prepared by a two‐stage sequential block copolymerization, whereas the statistical copolymer was obtained by the copolymerization of a mixture of the two monomers. The monomer reactivity ratios estimated with the statistical copolymerization were r₁ (IBVE) = 1.65 and r₂ (IpGlcVE) = 1.15. The obtained statistical copolymers were nearly uniform with the comonomer composition along the main chain. Both the block and statistical copolymers had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ∼ 1.1). Gel permeation chromatography, static light scattering, and spin–lattice relaxation time measurements in a selective solvent revealed that the block copolymer formed multimolecular micelles, possibly with a hydrophobic poly(IBVE) core and a glucose‐carrying poly(VE) shell, whereas the statistical copolymer with nearly the same molecular weight and segment composition was molecularly dispersed in solution. The surface properties of the solvent‐cast films of the block and statistical copolymer were also investigated with the contact‐angle measurement. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 459–467, 2001     

New chiral [N,N,N]‐ligand containing titanium/zirconium precatalysts for 1‐hexene polymerization

The ring‐opening reaction of (S)‐N‐tosyl‐2‐phenylaziridine by benzylamine in ethanol at 80 °C resulted in the formation of the (S,S)‐bis(N‐tosyl‐2‐amino‐2‐phenylethyl)benzylamine ligand in a 60% yield. The corresponding titanium complex, 1‐TiCl₂, was prepared by the reaction of the dilithiated parent ligand with TiCl₄. This precatalyst, in combination with methylaluminoxane, was capable of polymerizing 1‐hexene with good activities, resulting in the formation of good yields of low‐dispersity, high‐molecular‐weight polymers at low temperatures but higher yields of lower molecular weight polymers at higher temperatures. ¹H and ¹³C NMR spectra of the polymers suggested high isotacticity and predominant chain termination via β‐hydride elimination. The enantiomerically pure catalysts, (R,R)‐1‐TiCl₂ and (S,S)‐1‐TiCl₂, showed nearly identical polymerization results at various polymerization temperatures. However, when the catalyst was prepared from a racemic ligand, the obtained polymers had lower molecular weights with a bimodal distribution. This observation suggested diastereomeric aggregation of the racemic catalyst, which was well supported by the NMR studies, and a modified Arrhenius plot (the natural logarithm of the number‐average molecular weight vs the reciprocal of the temperature) also showed sigmoidal behavior, indicating the existence of two or more active species. Analogous zirconium precatalysts showed similar results in the polymerization of 1‐hexene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4006–4014, 2006     

Photocontrolled Iodine‐Mediated Reversible‐Deactivation Radical Polymerization: Solution Polymerization of Methacrylates by Irradiation with NIR LED Light

Herein, near‐infrared (NIR) photocontrolled iodide‐mediated reversible‐deactivation radical polymerization (RDRP) of methacrylates, without an external photocatalyst, was developed using an alkyl iodide (e.g., 2‐iodo‐2‐methylpropionitrile) as the initiator at room temperature. This example is the first use of a series of special solvents containing carbonyl groups (e.g., 1,3‐dimethyl‐2‐imidazolidinone) as both solvent and catalyst for photocontrolled RDRP using long‐wavelength (λ_max=730 nm) irradiation. The polymerization system comprises monomer, alkyl iodide initiator, and solvent. Well‐defined polymers were synthesized with excellent control over the molecular weights and molecular weight distributions (M_w/M_n<1.21). The living features of this system were confirmed by polymerization kinetics, multiple controlled “on‐off” light switching cycles, and chain extension experiments. Importantly, the polymerizations proceeded successfully with various barriers (pork skin and A4 paper), demonstrating the advantage of high‐penetration NIR light.     

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality have been studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro‐optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro‐optical properties which are critical in current and potential uses. This study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent, whereas in water and implicit poor solvent, the nonyl side chains are collapsed toward the PPE backbone. Rotation around the aromatic ring is fast and no long range correlations are seen within the backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 582–588     

Complex Formation Between Poly(dimethylsilane) and Cyclodextrins

Poly(dimethylsilane)s form inclusion complexes with cyclodextrins in high selectivity to give crystalline compounds. β‐Cyclodextrin forms complexes with poly(dimethylsilane)s of low molecular weight only, γ‐cyclodextrin with poly(dimethylsilane)s of high molecular weight in high yield, and α‐cyclodextrin does not form complexes with poly(dimethylsilane) at all. Complexes were isolated and characterized by spectroscopic methods and X‐ray diffraction.     

Preparation of nanoparticles of double‐hydrophilic PEO‐PHEMA block copolymers by AGET ATRP in inverse miniemulsion

Atom transfer radical polymerization with activators generated by electron transfer initiating/catalytic system (AGET ATRP) of 2‐hydroxyethyl methacrylate (HEMA) was carried out in inverse miniemulsion. Water‐soluble ascorbic acid as a reducing agent and mono‐ and difunctional poly(ethylene oxide)‐based bromoisobutyrate (PEO‐Br) as a macroinitiator were used in the presence of CuBr₂/tris[(2‐pyridyl)methyl]amine (TPMA) and CuCl₂/TPMA complexes. The use of poly(ethylene‐co‐butylene)‐block‐poly(ethylene oxide) as a polymer surfactant resulted in the formation of stable HEMA cyclohexane inverse dispersion and PHEMA colloidal particles. All polymerizations were well‐controlled, allowing for the preparation of well‐defined PEO‐PHEMA and PHEMA‐PEO‐PHEMA block copolymers with relatively high molecular weight (DP > 200) and narrow molecular weight distribution (M_w/M_n < 1.3). These block copolymers self‐assembled to form micellar nanoparticles being 10–20 nm in diameter with uniform size distribution, and aggregation number of ～10 confirmed by atomic force microscopy and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4764–4772, 2007     

Chain transfer to solvent in the radical polymerization of N‐isopropylacrylamide

Chain transfer to solvent has been investigated in the conventional radical polymerization and nitroxide‐mediated radical polymerization (NMP) of N‐isopropylacrylamide (NIPAM) in N,N‐dimethylformamide (DMF) at 120 °C. The extent of chain transfer to DMF can significantly impact the maximum attainable molecular weight in both systems. Based on a theoretical treatment, it has been shown that the same value of chain transfer to solvent constant, C_tr,S, in DMF at 120 °C (within experimental error) can account for experimental molecular weight data for both conventional radical polymerization and NMP under conditions where chain transfer to solvent is a significant end‐forming event. In NMP (and other controlled/living radical polymerization systems), chain transfer to solvent is manifested as the number‐average molecular weight (M_n) going through a maximum value with increasing monomer conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Using the reversible addition–fragmentation chain transfer process to synthesize core‐crosslinked micelles

Poly(2‐hydroxyethyl acrylate)–poly(n‐butyl acrylate) block copolymers were synthesized with the reversible addition–fragmentation chain transfer (RAFT) process. The block copolymers were synthesized successfully with either poly(2‐hydroxyethyl acrylate) or poly(n‐butyl acrylate) macro‐RAFT agents. The resulting block copolymers had narrow molecular weight distributions (polydispersity index = 1.3–1.4). Copolymer self‐aggregation in water yielded micelles, with the hydrodynamic diameter (D_h) values of the aggregates dependent on the length of both blocks according to D_h ～ N_BA^1.17N_HEA^0.57, where N_BA is the number of repeating units of n‐butyl acrylate and N_HEA is the number of repeating units of 2‐hydroxyethyl acrylate. The micelles were subsequently stabilized via chain extension of the block copolymer with a crosslinking agent. The successful chain extension in a micellar system was confirmed by an increase in the molecular weight, which was detected with membrane osmometry. The crosslinked particles showed noticeably different aggregation behavior in diverse solvent systems. The uncrosslinked micelles formed by the block copolymer (N_HEA = 260, N_BA = 75) displayed a definite critical micelle concentration at 5.4 × 10^?4 g L^?1 in aqueous solutions. However, upon crosslinking, the critical micelle concentration transition became obscure. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2177–2194, 2006     

Photopolymers: Synthesis and Characterization of Poly(3‐methacryloyloxystyryl‐2‐naphthyl ketone)

3‐Methacryloyloxystyryl‐2‐naphthyl ketone containing a photosensitive α,β‐unsaturated ketone moiety was synthesized and polymerized in methyl ethyl ketone using benzoyl peroxide as the initiator. The thermally stable polymer was characterized by means of UV, IR and NMR spectroscopy. The molecular weight data as obtained from gel permeation chromatography suggests a high tendency for chain termination by disproportionation. The photosensitivity of the polymer in the presence and absence of photosensitizers and the effect of solvent on the rate of photocrosslinking (see Figure) was also investigated.