Concentration dependence of the global and anisotropic dimensions of confined macromolecules

The chain dimensions 〈R²〉 of nondilute polymer solutions confined to a slit of the width D were studied using lattice simulations. It was found that the chain compression induced in good solvents by the concentration ϕ is enhanced in a slit relative to the bulk. The global dimensions of chains also change with ϕ in confined and unconfined theta solutions. At intermediate slit widths, a region was noted where coils are squeezed along all three axes. This region is manifested as a channel on the three‐dimensional surface 〈R²〉(D,ϕ) in both good and theta solvents. The coil anisotropy, given by the ratio of the parallel and perpendicular components of the chain dimensions 〈R_y²〉/〈R_x²〉, reaches high values at strong confinements, where coils form quasi‐two‐dimensional pancakes. The concentration‐induced reduction of the global chain dimensions in good solvents is almost fully transmitted to the parallel component 〈R_y²〉. The computed effects of concentration and confinement were compared with the predictions of mean‐field and scaling theories, and implications of the results to ultrathin films and layered nanocomposites were discussed. In addition, the distribution functions of the components of the end‐to‐end distance R perpendicular and parallel to the plates, W (R_x) and W (R_y), were calculated. The function W (R_x) combined with the concentration profile ϕ (x) along the pore provided details of the chain structure close to walls. A marked difference in the pace of the filling up of the depletion layer was noticed between chains in theta and good solvents. From the distribution functions W (R_x) and W (R_y), the highly anisotropic force‐elongation relations imply the deformation of chains in confined solutions and ultrathin bulk films.     

Electron-spin magnetic moments of the 2Σ+ ions Li2+, Li2−, and Be2+: An ab initio ROHF study

For the ²Σ⁺ ground states of the ions Li₂⁺, Li₂⁻, and Be₂⁺, the dependence of the magnetic moment (parametrized by g-shifts) on the bond length R was studied at the ROHF level. The Δ g-values were calculated via a perturbative approach (complete to second order in Breit-Pauli interactions) using quadruple-zeta AO basis sets augmented by semidiffuse and polarization functions. All Δ g-values in these systems are negative. The parallel component Δ g_∥ generally changes little with R, remaining close to the g-shift of the corresponding ²S atomic dissociation product. For Li₂⁺ and Be₂⁺, the perpendicular component Δ g _⟂ is more sensitive to geometry than is Δ g_∥, mainly because of the second-order magnetic coupling with excited ²Π states. For Li₂⁻, Δ g _⟂ and Δ g_∥ are similar due to the large size of the 2σ_u, SOMO, resulting in g-values close to that of a free electron. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 63: 511–521, 1997     

Diffusion of camphorquinone in uniaxially drawn polycarbonate films

Employing the laser-induced holographic grating relaxation technique, we have measured tracer diffusion coefficients of a phtochromous dye, camphorquinone, in uniaxially drawn polycarbonate films as a function of stretch ratio. Anisotropy in the tracer diffusion coefficient has been observed with D_∥ greater than D_⟂ by at least a factor of 4 for the film stretched to the stretch ratio δ = 2.3. The diffusion coefficient along the direction of stretch D_∥ increases significantly with increasing δ, whereas D_⟂ decreases slightly with increasing δ. The stretch ratio dependence of D_∥ and D_⟂ is interpreted according to a modified free volume theory. The strain rate and stretch temperature dependence of the anisotropic tracer diffusion coefficient has also been investigated. © 1992 John Wiley & Sons, Inc.     

A Monte Carlo Study of the Elastic Behavior of Polymethylene Chains

The rubber elastic behaviors of long polymethylene (PM) chains are investigated using Monte Carlo simulations and considering the rotational‐isomeric‐state model. Through the Monte Carlo method we can generate many PM chains in the equilibrium states, and obtain the average Helmholtz free energy 〈A〉 and average energy 〈U〉. Chain dimensions and thermodynamic statistical properties of long PM chains under various elongation ratios λ are also calculated. We find that the elastic force f increases with elongation ratio λ, and that energy contribution f_u to the elastic force is negative and significant. The ratio f_u /f ranges from –0.37 to –0.32 at T = 300 K and from –0.53 to –0.40 at T = 413 K, and decreases with increasing temperature, which agrees with the experimental data. Our calculations may provide some insights into the macroscopic phenomena of rubber elasticity.     

Dynamic Monte Carlo Simulation on the Polymer Chain with One End Grafted on a Flat Surface

A linear polymer chain in good solvent condition with one end grafted on a infinitely large, impenetrable flat surface is investigated using dynamic Monte Carlo simulation on a simple cubic lattice. Chain shape and dimension, angular correlation between the direction of the end‐to‐end vector and that of the longest principal axis of inertia are studied and discussed. Results reveal that the asphericity of end‐grafted polymer chains is greater than that of free ones, the limit ratio 〈L₁²〉 : 〈L₂²〉 : 〈L₃²〉 is about 1 : 3.0 : 14.9. The limit of mean angle 〈θ〉 of end‐grafted chains is about 22°, smaller than that of free chains, indicating angular correlation between the direction of the end‐to‐end vector and that of the longest principal axis is reinforced.     

The configurational free energy of a polymer chain

The configurational, or elastic, free energy A_el of a polymer chain is discussed in terms of the Fourier configurational approach. The importance of accounting for all degrees of freedom of the chain is shown in comparison with affine mean-field theories and with scaling theories of chain expansion and contraction. In case of strong contraction the chain does show neither affinity nor self-similarity, and we get A_el ∼ N^1/3, N being the number of chain bonds. Conversely, in case of good-solvent expansion we find A_el ∼ N. The same result holds in the vicinity of the Θ-temperature, where A_el is also proportional to [(T − Θ)/T]².     

Influence of excluded volume on the conformational property of tail-like chain on the simple cubic lattice

The influence of excluded volume on the conformational property of linear tail-like chain with one end attached to a flat surface is investigated by means of dynamic Monte Carlo method. Conformational properties such as mean-square end-to-end distance 〈R²〉, mean-square radius of gyration 〈S²〉 and mean asphericity parameter 〈A〉 are calculated for random walking (RW) and self-avoiding walking (SAW) tail-like chains on the simple cubic lattice. We find that the EV has nearly the same effect on 〈R²〉 as on 〈S²〉: (1) 〈R²〉_SAW/〈R²〉_RW≈〈S²〉_SAW/〈S²〉_RW∝n^0.204±0.05, where n is the chain length, and (2) the limiting value of 〈R²〉/〈S²〉≈7.7 for both chains. The distribution P(R) of the SAW tail-like chain can be expressed as a R⁴ correction of that of the RW one. We find that the value 〈A〉 of the SAW tail-like chain is bigger than that of the RW tail-like chain for all chain lengths, and the limiting values are 0.446±0.006 and 0.403±0.005 respectively.     

Molecular geometry and chain entanglement: parameters for the tube model

The tube diameter in the reptation model is the distance between a given chain segment and its nearest segment in adjacent chains. This dimention is thus related to the cross-sectional area of polymer chains and the nearest approach among chains, without effects of thermal fluctuation and steric repulsion. Prior calculated tube diameters are much larger, about 5 times, than the actual chain cross-sectional areas. This is ascribed to the local freedom required for mutual rearrangement among neighboring chain segments. This tube diameter concept seems to us to infer a relationship to the corresponding entanglement spacing. Indeed, we report here that the critical molecular weight, M_c, for the onset of entanglements is found to be M_c = 28 A/(〈R²〉₀/M), where A is the chain cross-sectional area and 〈R²〉₀ the mean-square end-to-end distance of a freely jointed chain of molecular weight M. The new, computed relationship between the critical number of backbone atoms for entanglement and the chain cross-sectional area of polymers, N_c = A^0,44, is concordant with the cross-sectional area of polymer chains being the parameter controlling the critical entanglement number of backbone atoms of flexible polymers.     

Kinetics of methyl methacrylate and n‐butyl acrylate copolymerization mediated by 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent

The RAFT (co)polymerization kinetics of methyl methacrylate (MMA) and n‐butyl acrylate (BA) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was studied with various RAFT concentrations and monomer compositions. The homopolymerization of MMA gave the highest rate. Increasing the BA fraction f_BA dramatically decreased the copolymerization rate. The rate reached the lowest point at f_MMA ～ 0.2. This observation is in sharp contrast to the conventional RAFT‐free copolymerization, where BA homopolymerization gave the highest rate and the copolymerization rate decreased monotonously with increasing f_MMA. This peculiar phenomenon can be explained by the RAFT retardation effect. The RAFT copolymerization rate can be described by 〈R_p〉/〈R_p〉₀ = (1 + 2(〈k_c〉/〈k_t〉)〈K〉)[RAFT]₀)^?0.5, where 〈R_p〉₀ is the RAFT‐free copolymerization rate and 〈K〉 is the apparent addition–fragmentation equilibrium coefficient. A theoretical expression of 〈K〉 based on a terminal model of addition and fragmentation reactions was derived and successfully applied to predict the RAFT copolymerization kinetics with the rate parameters obtained from the homopolymerization systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3098–3111, 2007     

Elastic behavior of single polymer chains adsorbed on rough surfaces

In this paper, elastic behaviors of single polymer chains adsorbed on the rough surfaces with a substrate and some periodically tactic pillars are investigated by the pruned-enriched-Rosenbluth method (PERM). In our simulation, a single polymer chain is firstly adsorbed on the substrate and then pulled along the z-axis direction, which is vertical to the substrate. We investigate the chain size and shape of polymer chains, such as mean-square radii of gyration per bond 〈S²〉_xy/N, 〈S²〉_z/N and shape factor 〈δ^∗〉 in order to show how the size and shape of adsorbed polymer chains change during the desorption process. Due to the occurrences of separation of the chains from the substrate, farther adsorption on the upper surfaces of pillars and complete separation from the whole rough surfaces in the elastic process, the changes of 〈S²〉_xy/N, 〈S²〉_z/N and 〈δ^∗〉 during the process are complicated. On the other hand, some thermodynamic properties such as average energy per bond, average Helmholtz free energy per bond, elastic force f are investigated, and our aim is to study the elastic behaviors of polymer chains adsorbed on the rough surface during the elasticity process. Elastic force f has some plateaus during the desorption process for strong adsorption interaction. If there is no adsorption interaction, the chains can get away from the rough surfaces spontaneously. These investigations can provide some insights into the elastic behaviors of polymer chains adsorbed on the rough surface.     

Perturbation expansion of polymers in shear flow

The effect of shear flow on the excluded volume properties of bead spring chains is calculated via the perturbation expansion of the mean-square end-to-end distance with respect to the excluded volume parameter z. The coefficient of the series 〈R²〉/〈R²〉₀ = 1 + C₁ · z − … vanishes for large flow rates but shows a strong dependence on the shear rate in the intermediate regime.     

Nonhomogeneous state of stress,strain, and swelling in amorphous polymer networks

The total free energy of an amorphous, crosslinked polymer is given as ΔA = ΔA_mix + ΔA_el, where ΔA_mix indicates the free energy of mixing of the crosslinked polymer and the solvent to which the network is exposed throughout the deformation process; ΔA_el indicates the elastic free energy of the network as a function of strain, including the effect of dilation with the solvent. The explicit forms of the mixing and the elastic free energies are obtained from the molecular theory of rubber elasticity. Recent developments in this field allow accurate representation of the behavior of swollen networks under strain. Expressions for the stress in terms of strain and swelling ratio are obtained from the free energy. Formulation of boundary-value problems are discussed. Bending of a cuboid subject to the action of a swelling agent is analyzed as an example. Material parameters are chosen for a crosslinked amorphous network. The distribution of stresses, strains, and solvent in the bent cuboid are calculated numerically. The magnitude of moments applied at the two ends are calculated for different degrees of flexure. Results are compared with those obtained for the same network in the dry state.     

Dynamic metal-ligand coupling in the infrared MCD spectra of the cobalt(II) tetrahalides

The axial single-crystal magnetic circular dichroism spectra of Cs₃ZnCl₅/Co²⁺ and Cs₃ZnBr₅/Co²⁺ have been measured over the 4000–7000 cm^?1 region of the ⁴A₂ → ⁴T₁ (F) transition at ambient and liquid-helium temperature. The B/D and C/D terms obtained give transition moment ratios, 〈t₂∥m∥t₂〉/〈e∥m∥t₂〉, in accord with the value required (?3^{$\text{1}\text{2}$}/2^{$\text{1}\text{2}$}) by a dynamic ligand-polarisation model for d-electron transition probabilities in tetrahedral metal complexes.     

Viscosities of dilute polymer solutions in nematic liquids

A nematic fluid is characterized by five friction coefficients. When dilute polymer coils are added to the fluid, all these coefficients are modified. Three Miesowicz viscosities (measured under an aligning magnetic field) and two coupling coefficients between orientation and flow are discussed. In our calculation, elastic dumbbells are used to model the flexible polymer chains. The results are written in terms of two size parameters R_∥ and R_⊥ and two chain friction coefficients λ_∥ and λ_⊥ (the label ∥ refers to a direction parallel to the nematic axis). This could be compared to other experiments (such as translational diffusion) which measure λ_∥ and _⊥ directly. They may give useful estimates of coil conformation in nematic solvents.     

Elastic behavior of uniform star polymer chains

Elastic behaviors of uniform star polymer chains with two to seven branches (namely, functionality f = 2-7) are investigated using Monte Carlo simulation and the bond fluctuation model. Here chain dimensions and thermodynamic properties of uniform star polymer chains during the process of tensile elongation are studied, and comparisons with linear chain are also made. Static properties of chains such as chain sizes and asphericities of chains are calculated, and g-value of g = 〈S²〉_star/〈S²〉_linear decreases with elongation ratio increasing for different functionality f. Thermodynamic properties such as average energy 〈U〉, free energy per bond 〈A′〉 and elastic force F are also investigated during the process of tensile elongation. In the meantime, scatting functions P(q) are calculated for star polymer chains with different functionality f. Additionally, we also discuss the influence of elongation ratio on scattering form factor. The impenetrability of the star cores is known to cause a discontinuity in the osmotic pressure showed through a peak in the scattering functions, and some different behaviors in the tensile process for uniform star chain are obtained.     

Excluded-volume effect for various chain models. I. Application to optical anisotropy and end-to-end distance of linear polymers

A study of the effect of excluded volume on the mean-square optical anisotropy 〈γ²〉 and the mean-square end-to-end distance 〈R²〉 has been carried out for polymer chains of up to 2000 bonds. The calculations have been made for models assuming (a) equiprobability of internal rotations and (b) interdependence of short-range intramolecular interactions. All the results indicate that 〈γ²〉 is practically insensitive to the excluded-volume effect. Concomitantly the behavior of 〈R²〉 has been analyzed.     

Conformation study of poly(p‐dioxanone) fibers by polarized Raman spectroscopy,X‐ray diffraction,and conformation analysis

The molecular orientation distribution of poly(p‐dioxanone) (PPDX) uniaxially oriented commercial fibers was determined by polarized Raman spectroscopy and X‐ray diffraction. The order parameters 〈P₂₀₀〉 and 〈P₄₀₀〉 of the orientation distribution function were determined by polarized Raman spectroscopy. For the C?O stretching band, the values of 〈P₂₀₀〉 and 〈P₄₀₀〉 obtained are equal to ?0.40 ± 0.04 and 0.28 ± 0.04, respectively. These results clearly indicate that the carbonyl groups are highly oriented perpendicular to the fiber axis. X‐ray diffraction led to a fiber repeat value of 0.628 nm for these samples, and to 〈P₂₀₀〉 and 〈P₄₀₀〉 values of 0.93 and 0.82, respectively, for the c‐axis orientation, indicating a high orientation in the draw direction of the fibers. A Monte‐Carlo conformational search led to 20 low‐energy conformations, but only one of these was found compatible with both the fiber repeat and the angle between the C?O bond and the fiber axis. This conformation, a 2₁ helix with a tg^?ttg^? succession of torsion angles, is proposed as the existing conformation in the crystalline state. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 406–417, 2008     

Laser light-scattering investigation of the density of pauci-chain polystyrene microlatices

The average density (〈ρ〉) of the pauci-chain polystyrene microlatices (PCPS), which contains a few linear polystyrene chains, was investigated by laser light scattering (LLS) including both angular dependence of absolute integrated scattered intensity (static LLS) and of the line-width distribution G(Γ) (dynamic LLS). In static LLS, the weight-average particle mass (M_w) and the z-average radius of gyration (R_g) were measured; and simultaneously in dynamic LLS, the hydrodynamic radius distribution was obtained from Laplace inversion of very precisely measured intensity-intensity time correlation function. A combination of both the static and dynamic LLS results leads us to a value of 〈ρ〉. For comparison, we also determined 〈ρ〉 of conventional multichain polystyrene latex (MCPS) by following the same LLS procedure. It was found that 〈ρ〉_MCPS = 〈_bulk〉 = 1.05 g/cm^3, but 〈ρ〉_PCPS = 0.92 g/cm^3. This difference in density suggests that the intersegmental distance in MCPS or bulk polystyrene is smaller than that in PCPS, even the chains in PCPS are confined to a smaller volume. This might attribute to the fact, namely the intersegmental approaching inside PCPS is mainly the intrachain crossing which is more difficult in comparison with the interchain crossing inside MCPS or bulk polystyrene.     

Elastic behavior of bimodal poly(dimethylsiloxane) networks

The rubberlike elastic behavior of bimodal poly(dimethylsiloxane) (PDMS) networks was investigated by the Monte Carlo simulation method and enumeration calculation method on the basis of the rotational‐isomeric‐state (RIS) model. These bimodal PDMS networks consist of short chains (chain length from 10 to 20) as well as long chains (chain length equal to 150). For long PDMS chains, through generating many PDMS conformations in the equilibrium state using the Monte Carlo simulation method we can obtain the average Helmholtz free energy and the average energy. For short PDMS chains with chain lengths from 10 to 20, as the total number of conformations is only from 6.56 × 10³ to 3.87 × 10⁸, we adopt the enumeration calculation method. The deformation is partitioned nonaffinely between the long and short chains, and this partitioning can be determined by requiring the free energy of the deformed network to be minimized. Chain dimensions and thermodynamic statistical properties of bimodal PDMS networks at various elongation ratios are discussed. We find that elastic force f increases with elongation ratio λ; the energy contribution f_u to elastic force is significant, and the ratio of ranges from 0.15 to 0.36 at T = 343 K. In the meantime, elastic force f increases with the average energy 〈U〉. The energy change in the process of tensile elongation is taken over, which has been ignored in previous theories. Our calculations may provide some insights into the phenomena of rubberlike elasticity of bimodal networks. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 105–114, 2002     

Photon correlation spectroscopy of polystyrene as a function of temperature and pressure

Photon correlation spectroscopy is employed to study the slowly relaxing density and anisotropy fluctuations in bulk atactic polystyrene as a function of temperature from 100 to 160°C and pressure from 1 to 1330 bar. The light-scattering relaxation function is well described by the empirical function ?(t) = exp[?(t/τ)^β], where for polystyrene β = 0.34. The average relaxation time is determined at each temperature and pressure according to 〈τ〉 = (τ/β)Γ(1/β) where Γ(x) is the gamma function. The data can be described by the empirical relation 〈τ〉 = 〈τ〉₀ exp[(A + BP)/R(T ? T₀)] where R is the gas constant and T₀ is the ideal glass transition temperature. The empirical constant A/R is in good agreement with that determined from the viscosity or the dielectric relaxation data (1934 K). The empirical constant B can be interpreted as the activation volume for the fundamental unit involved in the relaxation and is found to be comparable to one styrene subunit (100 mL/mol). The quantity B appears to be a weak function of temperature. The use of pressure as a tool in the study of light scattering near the glass transition now has been established.