Self-assembly of polymer and molybdenum oxide into lamellar hybrid materials

We report on self-assembly of polymer and molybdenum oxide chains into a new class of lamellar hybrid materials. Aqueous ammonium molybdate and polyvinyl alcohol (PVA) or carboxymethyl cellulose (CMC) were used as the starting materials. Ammonium molybdate was hydrolyzed into layered molybdenum oxide under acidified conditions. The organic polymer chains and the inorganic molybdenum oxide layers self-assemble and pack into new hybrid composites. Scanning electron microscope (SEM) images and polarized microscopy show that these two new materials have typical lamellar structure. Transmission electron microscope (TEM) images show that the layer thickness is about 100 nm. X-ray diffraction (XRD) data confirm the formation of inorganic molybdenum oxide. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) data gave thermal behavior of these composites. The mechanism of this hybrid reaction and the templating function of polymers were discussed in this paper. A special entropy effect was discovered when polymer was used as guest species. This entropy effect makes polymers preferential candidates as guest species rather than small molecules when fabricating organic/inorganic layered hybrid materials. We believe that this opens a new way to create organic/inorganic hybrid superstructures.     

Tetrahydroxy‐Perylene Bisimide Embedded in a Zinc Oxide Thin Film as an Electron‐Transporting Layer for High‐Performance Non‐Fullerene Organic Solar Cells

By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO‐PBI ligands were obtained which upon deprotonation can complex Zn^II ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic–inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO: HO‐PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non‐fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 % for a non‐fullerene based organic solar cell.     

Hydrogels from Amorphous Calcium Carbonate and Polyacrylic Acid: Bio‐Inspired Materials for “Mineral Plastics”

Given increasing environmental issues due to the large usage of non‐biodegradable plastics based on petroleum, new plastic materials, which are economic, environmentally friendly, and recyclable are in high demand. One feasible strategy is the bio‐inspired synthesis of mineral‐based hybrid materials. Herein we report a facile route for an amorphous CaCO₃ (ACC)‐based hydrogel consisting of very small ACC nanoparticles physically cross‐linked by poly(acrylic acid). The hydrogel is shapeable, stretchable, and self‐healable. Upon drying, the hydrogel forms free‐standing, rigid, and transparent objects with remarkable mechanical performance. By swelling in water, the material can completely recover the initial hydrogel state. As a matrix, thermochromism can also be easily introduced. The present hybrid hydrogel may represent a new class of plastic materials, the “mineral plastics”.     

Molecular manipulation of solid state structure: influences of organic components on vanadium oxide architectures

Among the inorganic materials enjoying widespread contemporary interest, the metal oxide based solid phases occupy a prominent position by virtue of their applications to catalysis, sorption, molecular electronics, energy storage, optical materials and ceramics. The diversity of properties associated with these materials reflects the chemical composition, which allows variations in covalency, geometry and oxidation states, and the crystalline architecture, which may provide different pore structures, coordination sites, or juxtapositions of functional groups. Despite such fundamental and practical significance, the design of the structure of such materials remains a challenge in solid state chemistry. While organic materials have been synthesized which self-assemble into ordered arrays at low temperature and which exhibit molecular recognition and biomimetic activity, the ability to synthesize inorganic materials by rational design remains elusive. Small, soluble molecular building blocks with well-defined reaction chemistries which allow their low-temperature assembly into crystalline solid state inorganic materials are not well known. However, the existence of naturally occurring, structurally complex minerals establishes that hydrothermal synthesis can provide a low temperature pathway to produce open-framework and layered metastable structures utilizing inorganic starting materials. Thus, hydrothermal conditions have been used to prepare microporous tetrahedral framework solids that are capable of shape-selective absorption, like zeolites and aluminophosphates, and more recently in the preparation of complex solid arrays of the M/O/PO³⁻₄ and M/O/RPO²⁻₃ systems (M=V and Mo). The hydrothermal technique may be combined with the introduction of organic components which may act as charge compensating groups, space-filling units, structure directing agents, templates, tethers between functional groups, or conventional ligands in the preparation of inorganic/organic composites.In the past decade, this general strategy has been exploited in the evolution of a family of vanadium oxides incorporating structure-directing organic or secondary-metal organic subunits, which are the topic of this review. The synthetic approach to novel vanadium oxide solids occupies the interface between materials science and coordination chemistry. The emerging theme focuses on the association of an organic component, acting as a ligand, tether, or structure directing moiety, with the inorganic framework of the solid to provide unique composites. While some organic components may limit the size of inorganic cluster subunits of a solid by passivating the surface of an aggregate through capping, such ligands may also serve to link inorganic subunits into complex networks. In other cases, the organic subunit, rather than participating as a covalently bound unit of the framework, acts in a structure directing role, producing amphiphilic materials whose structures are determined by hydrophobic–hydrophilic interactions. This latter feature is reminiscent of the factors influencing biomineralization, a field which may prove relevant to the development of new strategies for the controlled synthesis of organized inorganic and organic/inorganic composite materials. These various approaches to the “design” of inorganic solids are discussed and assessed in terms of the new structural types recently observed in the vanadium oxide chemistry.     

On the connectivity of modified glass networks

The concept of network connectivity is applied to inorganic oxide glasses of hybrid structure. In order to describe these materials which are ripe for investigation, a new terminology is put forward. By using this terminology, some new lines of research can be readily identified. The way in which the physical properties of these novel materials will change with structure is discussed in broad terms, with particular reference to the glass transition temperature.     

Inorganic Clusters in Organic Polymers and the Use of Polyfunctional Inorganic Compounds as Polymerization Initiators

Summary.   Silicon oxide or metal oxide clusters or small particles with polymerizable organic groups covalently bonded to their surface can be copolymerized with organic monomers by various polymerization techniques. Whereas the preparation and properties of the polymers reinforced by R ₈Si₈O₁₂ have already been well investigated, analogous materials with incorporated transition metal oxide clusters are only beginning to show their potential as an interesting new class of inorganic-organic hybrid polymers. In the second part of the article, approaches are reviewed in which the inorganic building block serves as an initiator for polymerization reactions. This results in materials in which the organic polymer is grafted from an inorganic core. Most work has been done with surface-modified silica particles. Free radical polymerizations and atom transfer radical polymerizations with macroinitiators are summarized. The latter method results in polymeric particles in which an inorganic core is surrounded by an organic polymer shell. A new approach is the use of polyfunctional inorganic molecules or molecular clusters as initiators. Received July 28, 2000. Accepted August 7, 2000     

Das Sol‐Gel‐Verfahren: Anorganische Synthesemethoden

The sol‐gel process is an interesting route to prepare inorganic and inorganic‐organic sols. These sols, in general, consist of colloidal nanoparticles or oligomers and are stabilized by electrical charges or functional groupings in order to avoid uncontrolled agglomeration. By appropriate processing, many interesting materials such as coatings on glasses and plastics, ceramics or materials for optics, data storage and information technologies can be fabricated.     

Recognition and assembly using protein “building blocks”

A new approach to materials design is presented, utilizing specific recognition and assembly of proteins at the molecular level. The approach exploits the control over polymer chain microstructure afforded by biosynthesis to produce protein-based materials with precisely defined physical properties. Incorporated into these materials are recognition elements that stringently control the placement and organization of each chain within higher order superstructures. The proteins, designated Recognin A2 through Recognin E2, are recombinant polypeptides designed de novo from both natural consensus sequences and an appreciation of the physical principles governing biological recognition. The synthesis and characterization of the protein recognition elements is briefly described and initial studies on self-assembly-recognition patterns using surface plasmon resonance and circular dichroism are presented. A subset of these materials are programmed to spontaneously assembly into complex, multicomponent structures and represent a first step in a rational approach to nanometer-scale structural design.     

Structural diversity and chemical trends in hybrid inorganic-organic framework materials

Hybrid framework compounds, including both metal-organic coordination polymers and systems that contain extended inorganic connectivity (extended inorganic hybrids), have recently developed into an important new class of solid-state materials. We examine the diversity of this complex class of materials, propose a simple but systematic classification, and explore the chemical and geometrical factors that influence their formation. We also discuss the growing evidence that many hybrid frameworks tend to form under thermodynamic rather than kinetic control when the synthesis is carried out under hydrothermal conditions. Finally, we explore the potential applications of hybrid frameworks in areas such as gas separations and storage, heterogeneous catalysis, and photoluminescence.     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.     

Copper—A “Modern” Bioelement

Copper is a bioessential element in biology with truly unique chemical characteristics in its two relevant oxidation states +I and +II. Significant progress has been made in recent years in the elucidation of the frequently surprising biochemistry of this trace element. Those advances were especially furthered through mutual stimulation involving results from biochemistry, molecular biology, and medicine on one hand and the synthesis as well as the structural and spectroscopic characterization of low molecular weight model complexes on the other. The most notable features of protein-bound active copper are its almost exclusive function in the metabolism of O₂ or N/O compounds (NO, N₂O) and its frequent association with oxidizing organic and inorganic radicals such as tyrosyl, semiquinones, superoxide, or nitrosyl. This unique biological role of copper can be rationalized given its chemical and assumed evolutionary background.     

Fluorescent “Turn‐on” Sensing Based on Metal–Organic Frameworks (MOFs)

Metal–organic frameworks (MOFs) have evolved as an exciting class of materials in the domain of porous materials. The unique features of these materials arise from the combined properties of metal ions/clusters and organic struts which form the building blocks of these fascinating architectures. Among other multifarious applications, MOFs have shown tremendous applications as sensory materials for a wide variety of species. The signal transduction induced mechanism in these confined nanospaces generate optical output in response to a particular analyte which can be detected by wide variety of detection techniques. Fluorometric methods of sensing is one of widely studied method over past few decades. MOF‐based fluorometric detection is a key research theme developed over the past few years. In this review, we give a brief overview of the recent developments of MOFs as “turn‐on” sensors for a wide range of analytes (viz. cations, anions, volatile organic compounds (VOCs), etc.).     

One‐Step Formation of “Chain‐Armor”‐Stabilized DNA Nanostructures

DNA‐based self‐assembled nanostructures are widely used to position organic and inorganic objects with nanoscale precision. A particular promising application of DNA structures is their usage as programmable carrier systems for targeted drug delivery. To provide DNA‐based templates that are robust against degradation at elevated temperatures, low ion concentrations, adverse pH conditions, and DNases, we built 6‐helix DNA tile tubes consisting of 24 oligonucleotides carrying alkyne groups on their 3′‐ends and azides on their 5′‐ends. By a mild click reaction, the two ends of selected oligonucleotides were covalently connected to form rings and interlocked DNA single strands, so‐called DNA catenanes. Strikingly, the structures stayed topologically intact in pure water and even after precipitation from EtOH. The structures even withstood a temperature of 95 °C when all of the 24 strands were chemically interlocked.     

Physicochemical Aspects of Development of Multicomponent Chalcogenide Phases Having the Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript> Structure: A Review

The literature data on ternary structural analogues of the compound Tl₅Te₃ and multicomponent phases based on them are systematized. This class of inorganic substances is of considerable scientific and practical interest as promising functional materials having thermoelectric, optical, and magnetic properties, as well as topologically protected surface states and superconductivity. The focus of the survey is on phase equilibria in ternary and more complex systems where structural analogues of Tl₅Te₃ are formed. Crystalstructure features, thermodynamic and some physical properties of these compounds and phases of variable composition are considered.     

Polymer Brushes by the “Grafting to” Method

This paper focuses on the attachment of densely grafted polymer layers (polymer brushes) to various inorganic and polymeric substrates by the “grafting to” method. A brief overview of synthesis of polymer brushes by the method is first provided, with emphasis on chemical approaches to polymer attachment. The second part of the paper covers the synthesis of polymer layers via a recently developed macromolecular anchoring layer approach. Several examples of application of the grafting technique are presented for generation of hydrophobic, hydrophilic, gradient, and switchable surfaces.

     

Characterisation of a new sol-gel precursor for a SiO<Subscript>2</Subscript>-rhodamine 6G hybrid class II material

The entrapment of organic dyes in inorganic solids offers several advantage for solid-state laser applications with respect to the use of liquid or polymer hosts. Among the various inorganic hosts, silica is preferred for its superior mechanical, thermal and optical properties. Organic dyes, such as Rhodamine 6G (Rh6G), can be immobilised in SiO₂ both physically (materials of class I), and by covalent bonds (class II materials). In the past years Rh6G-SiO₂ class I hybrids were prepared. In this work we propose, for the first time, a Rh6G-SiO₂ class II hybrids. We describe the preparation of a suitable sol-gel Rh6G precursor verified by FT-IR analysis and report the characterization of the hybrid materials by means of thermal and porosimetric analysis and optical spectroscopy measurements. The precursor is thermally stable up to ∼250°C, and its optical characteristics (UV-VIS absorbance and photoluminescence, PL) do not change with respect to those of the pristine dye molecule. The PL spectra of the final hybrids show that they are promising candidates for applications in solid state dye lasers.     

C<Subscript>18</Subscript>-Free Organic–Inorganic Hybrid Silica Particles Derived from Sole Silsesquioxane for Reversed-Phase HPLC

Ethyl-bridged organic–inorganic hybrid silica particles were prepared via a sol–gel and hydrothermal synthesis approach using 1,2-bis(triethoxysilyl)ethane (BTESE) as the sole precursor, and triblock copolymer poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (P123) and dodecyltrimethylammonium bromide (DTAB) as combined templates. The morphology, pore structure, chemical composition and liquid chromatographic performance of the obtained materials were investigated in detail. The particles exhibit a high surface area of 1136.40 m²/g, together with a pore volume of 0.39 cm³/g and an average pore size of 2.30 nm. Used as stationary phase for high-performance liquid chromatography (HPLC), the particles without extra bonding either C₁₈ or C₈ can successfully separate a mixture of uracil, phenol, pyridine, methylbenzene, ethylbenzene and tert-butylbenzene. The obtained materials also show practical application in the separation of phthalate acid esters (PAEs), which are harmful to environment and human health. Although the columns packed with ethyl-bridged organic–inorganic hybrid silica show lower column efficiency and peak symmetry compared to commercial column, they have considerably higher chemical stability in alkaline mobile phase. The HSS column also possesses high mechanical stability which is similar to that of the commercial column.     

Enzyme Catalysis “Reilluminated”

In a new light : The NADPH:protochlorophyllide (Pchlide) oxidoreductase (POR; see structure, green Pchlide, yellow NADPH) is a good model to investigate catalytical processes in enzymes, as its light activation allows an immediate start of the catalyzed reaction. By irradiation with weak, short laser pulses it is possible to detect conformation changes during the reaction and thus to uncover the elementary steps of the catalytic process.

     

Temperature dependent relaxation of a “solid–liquid”

We have used the Interfacial Force Microscope to perform temperature dependent indentation measurements on a model viscoelastic material, Silly Putty. By transforming time dependent stress relaxations into frequency dependent modulus, we can identify the temperature dependence of the elastic and viscous response of an experimentally challenging material. This technique promises to be useful in determining the mechanical properties of composite materials with microscopic spatial resolution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1285–1290, 2009     

Sol–Gel‐Derived Biohybrid Materials Incorporating Long‐Chain DNA Aptamers

Sol–gel‐derived bio/inorganic hybrid materials have been examined for diverse applications, including biosensing, affinity chromatography and drug discovery. However, such materials have mostly been restricted to the interaction between entrapped biorecognition elements and small molecules, owing to the requirement for nanometer‐scale mesopores in the matrix to retain entrapped biorecognition elements. Herein, we report on a new class of macroporous bio/inorganic hybrids, engineered through a high‐throughput materials screening approach, that entrap micron‐sized concatemeric DNA aptamers. We demonstrate that the entrapment of these long‐chain DNA aptamers allows their retention within the macropores of the silica material, so that aptamers can interact with high molecular weight targets such as proteins. Our approach overcomes the major limitation of previous sol–gel‐derived biohybrid materials by enabling molecular recognition for targets beyond small molecules.