SOME MONOCYCLIC AND SPIROCYCLIC FLUOROPHOSPHORANES CONTAINING 6- AND 7-MEMBERED RINGS

Abstract

The reaction of 2,2-dimethyl-(1,8-naphtho[c,d])-1,3,2-dioxysilenin (3) and 2,2-dimethyldibenzo-1,3,2-dioxysilepin (4) with (C₆H₅)₂PF₃ gave the expected monocyclic fluorophosphoranes. Reaction of the same siloxy compounds with PF₅ gave products which could not be purified but whose ¹⁹F nmr spectra suggested that the desired spirocyclic compounds were present in the impure products. Reaction of the siloxy compounds with C₆H₅PF₄ did not yield identifiable products. The ¹⁹F nmr spectra of the products obtained are discussed and structures are tentatively assigned.     

Chirale 1,3,2‐Oxazaborolidine aus chiralen 2,3‐Dihydro‐1H‐1,3,2‐diazaborolen und Diphenylketen

Chiral 1,3,2‐Oxazaborolidines from the Reaction of Chiral 2,3‐Dihydro‐1H‐1,3,2‐diazaboroles and Diphenylketene Reaction of equimolar amounts of diphenylketene with 1,3‐di‐tert‐butyl‐2‐isobutyl‐2,3‐dihydro‐1H‐1,3,2‐diazaborole ( 1 ) regioselectively afforded 1,3,2‐oxazaborolidine ( 2 ). The employment of a series of chiral diazaboroles ( 3a : X = nBu; b: iBu; c: CH₂SiMe₃; d: NHtBu) led to the formation of the diastereoisomeric oxazaborolidines ( 4a – d ) with diastereomeric excesses de, which increase with the steric demand of X from de = 55 % (X = nBu) to de ≥ 95 % (X = NHtBu). Under comparable conditions the treatment of the enantiomerically pure diazaborole ( 6 ) with the ketene yielded oxazaborolidine ( 7 ) with a de‐value of only 52 %. The new compounds, with exception of 2 and 4d , are thermolabile solids, which were characterized mainly by spectroscopy (¹H‐, ¹¹B{¹H}‐, ¹³C{¹H}‐NMR, MS). The X‐ray structure analysis of 2 revealed a slightly puckered five‐membered heterocycle with a long B–O bond.     

Darstellung sowie Kristall- und Molekülstruktur von Triphenylphosphinoxidhydrogenfluorid, (C6H5)3PO · HF

Preparation, Crystal and Molecular Structure of Triphenylphosphineoxide Hydrogen - fluoride (C₆H₅)₃PO · HF (C₆H₅)₃PO · HF was prepared from hydrofluoric acid (40%) and (C₆H₅)₃PO in benzene. It crystallizes in the monoclinic space group P2₁/c with a = 1 032.8(3), b = 1 051.0(7), c = 1695.5(2) pm, β = 121.95(2)° and Z = 4; d (calc./obs.) 1.27/1.26 g ° cm^?3. The structure was determined by direct methods from 2 709 independent reflections and has been refined by full matrix least squares methods to R = 0.049. In the compound HF and (C₆H₅)₃PO are linked by a short H-bond. Some distances: O? F 238.4(5), O? H 142.3, H? F 99.8, P? O 149.5(4) pm. Angle O? H? F 159.8°.     

Synthesis of Tricyclic (λ5)-Phosphoranes; unusual N-demethylation/N-alkylation reactions during the oxidative addition of hexafluoroacetone and tetrachloro-ortho-benzoquinone to benzodiaza-λ3-phosphorinones. Single crystal X-ray diffraction studies of various products

The reaction of methylisatoic acid anhydride 1 with benzylamines led to the N-benzyl-N′-methylanthranilamide derivatives 2 – 4 . Their reaction with phosphorus trichloride furnished the 2-chloro-1-halobenzyl/benzyl-3-methyl-4(1 H)-1,3,2-benzodiazaphosphorin-4-ones 5 – 7 which, upon reaction with bis-(2-chloroethyl)ammonium chloride/triethylamine, were converted into the P-bis-(2-chloroethyl)amino-1-halobenzyl/benzyl-3-methyl-4(1 H)-1,3,2-benzodiazaphosphorin-4-ones 8 – 10 and 12 . With 2-chloroethylammonium chloride/triethyl-amine the P? NHCH₂CH₂Cl-substituted compound 11 was obtained from the P^IIICl-species 6 . The reaction of 8 – 10 and 12 with hexafluoroacetone (HFA) took an unusual course: apart from the oxidative addition of HFA and formation of the perfluoropinacolyl ring system, one of the two CH₂CH₂Cl groups was found to alkylate the CH₃N atom with formation of a five-membered (diazaphospholane) ring in the tricyclic phosphoranes 13 – 16 . The reaction of 11 with HFA also produced a spirophosphorane 17 which involved a λ⁵-oxazaphosphetidine ring system. In the reaction of 8, 10 and 12 with tetrachloro-o-benzoquinone, an oxidative addition reaction with concomitant N-alkylation and formation of the tricyclic phosphoranes 18 – 20 was found to take place. Single crystal X-ray structure determinations are described for the phosphoranes 13, 14 and 16 , and for the precursor compound 9 . The following features are common to the isostructural compounds 13 and 16 and the diethyl ether hemisolvate of 14 : the (λ⁵)-spiro phosphorus atom lies out of the plane of the other atoms of the rings to which it is common, and the dioxaphospholane rings display a twist conformation. In the λ³P-compound 9 the phosphorus atom also lies out of the plane of the other ring atoms.     

Structural characteristics of 2-halo-1,3,2-dithiarsenic compounds and tris-(pentafluorophenylthio)-arsen

The combination of various dithiols and AsX₃ (X = F, Cl) produces the series of cyclized halo-arsenic dithiolate compounds: 2-chloro-1,3,2-dithiarsolane [AsCl(SCH₂CH₂S)] (1), 2-iodo-1,3,2-dithiarsolane [AsI(SCH₂CH₂S)] (2), 2-chloro-1,3,2-dithiarsenane [AsCl(SCH₂CH₂CH₂S)] (3), 2-iodo-1,3,2-dithiarsenane [AsI(SCH₂CH₂CH₂S)] (4), 3-chloro-4H,7H-5,6-benz-1,3,2-dithiarsepine [AsCl(SCH₂)₂(C₆H₄)] (5), 1,2-bis-dithiarsolan-2-ylmercapto-ethane [As₂(SCH₂CH₂S)₂(SCH₂CH₂S)] (6) and tris-(pentafluorophenylthio)-arsen [As(SC₆F₅)₃] (7). The geometry around As for these compounds is best described as trigonal pyramidal with varying degrees of distortion. Compound 1 crystallizes in two polymorphic forms with similar structural parameters. The compounds have been characterized by IR, ¹H, ¹⁹F, and ¹³C NMR, X-ray crystallography and GC-MS.     

Polysulfonylamine. XL Darstellung von Silber(I)-disulfonylamid-Acetonitril-Komplexen. Röntgenstrukturanalytische und thermochemische Charakterisierung von Tetraacetonitrilsilber(I)-bis(dimesylamido)argentat(I) und von (1,1,3,3-Tetraoxo-1,3,2-benzodithiazolido)acetonitrilsilber(I)

Polysulfonyl Amines. XL. Preparation of Silver(I) Disulfonylamide Acetonitrile Complexes. Characterization of Tetraacetonitrilesilver(I) bis(dimesylamido)argentate(I) and (1,1,3,3-Tetraoxo-1,3,2-benzodithiazolido)acetonitrilesilver(I) by X-Ray Diffractometry and Thermal Analysis The following silver(I) disulfonylamides were prepared for the first time or by improved procedures: AgN(SO₂CH₃)₂ ( 2a ); AgN(SO₂C₆H₄-4-X)₂ with X = F ( 2b ), Cl ( 2c ), Br ( 2d ), CH₃ ( 2e ); silver(I) 1,2-benzenedisulfonimide AgN(SO₂)₂C₆H₄ ( 2f ). With acetonitrile, the salts 2a to 2e form (1/2) complexes AgN(SO₂R)· 2 CH₃CN ( 4a to 4e ), whereas 2f gives the (1/1) complex AgN(SO₂)₂C₆H · CH₃CN ( 4f ). The crystallographic data (at - 95°C) for the title compounds 4a and 4f are: 4a , space group C2/c, a = 1 967.6(4), b = 562.2(1), c = 2 353.0(5) pm, β = 102.21(2)°, V = 2.5440 nm³, Z = 4, D_x = 1.891 Mg m^?3; 4f , space group P2₁/m, a = 741.5(3), b = 980.4(4), c = 756.6(3) pm, β = 99.28(2)°, V = 0.5428 nm³, Z = 2, D_x = 2.246 Mg m^?3. 4a forms an ionic crystal [Ag(NCCH₃)₄]^⊕[Ag{N(SO₂CH₃)₂}₂]^? with a tetrahedrally coordinated silver atom (lying on a twofold axis) in the cation (225.3/225.7 pm for the two independent Ag? N distances, N? Ag? N 106.2—114.5°) and a linear-dicoordinated silver atom in the centrosymmetric anion (Ag? N 213.9 pm, two intraionic secondary Ag…O contacts 303.4 pm). 4f consists of uncharged molecules [C₆H₄(SO₂)₂N¹AgN²CCH₃] with crystallographic mirror symmetry (Ag? N¹ 218.8, Ag? N² 216.1 pm, N¹? Ag? N² 174.3°), associated into strands by intermolecular secondary silver-oxygen contacts (Ag…O 273.8 pm, O…Ag…O 175.6, N? Ag…O 91.9/88.2°). The thermochemical behaviour of 4f was investigated using thermogravimetry, differential scanning calorimetry (DSC), time- and temperature-resolved X-ray diffractometry (TXRD), and solution calorimetry. The desolvation process occurs in the temperature range from 60 to 200°C and appears to be complex, although no crystalline intermediate could be detected. The desolvation enthalpy at 298 K was found to be + 26.8(4) kJ mol^?1. 4a is desolvated in two steps at - 15 to 60°C and 60 to 95°C (DSC), suggesting the formation of AgN(SO₂CH₃) · CH₃CN as an intermediate.     

19F-NMR-spektroskopischer Nachweis und statistische Untersuchung zur Bildung der gemischten Clusteranionen [(Mo6ICl)F]2−, n = 0–7, und Darstellung von (TBA)2[(Mo6I)F]

¹⁹F NMR Spectroscopic Evidence and Calculation of the Statistical Formation of Mixed Cluster Anions [(Mo₆I Cl )F ]^2?, n = 0–7, and Preparation of (TBA)₂[(Mo₆I )F ] The octa-μ₃-iodo-hexafluoro-hexamolybdate(2?)ion [(Mo₆I)F]^2? is prepared for the first time. The system of the 21 innersphere mixed clusters (Mo₆ICl)⁴⁺, n = 0–7 is formed by exchange of innersphere bound Clⁱ against outersphere bound I^a on tempering solid [(Mo₆Cl)I] at 400°C. Prolonged tempering leads to increasing average n values of the mixture, which is converted into the tetrabutylammonium salt (TBA)₂[(Mo₆ICl)F]. Using increments of chemical shifts and integral peak intensities the 54 ¹⁹F-nmr signals of the 21 species (compound n = 8 is absent) are assigned and confirmed by the 2 D-¹⁹F/¹⁹F-COSY spectrum. From the measured intensities the distribution of the different compounds is determined and proves significant deviation from statistical occupation, revealing the preference of isomers with iodine atoms occupying edges of the innersphere cube and discrimination of those sharing diagonals of the faces. Moreover all compounds with n = 3 and 4 are present overaverage in comparison to the others.     

Exceptional Products of the Desulfurization of N,2-Diaryl-5-(arylimino)- 2,5-dihydro-4-nitroisothiazol-3-amines

The desulfurization of several N,2-diaryl-5-(arylimino)-2,5-dihydro-4-nitroisothiazol-3-amines 5 with Ph₃P led to complex mixtures of products in low yields. For instance, quinoxaline-2-carboxamide 1-oxides of type 6 (Scheme 2) and, in some cases, also 3-nitroquinolines of type 7 (Scheme 5) were isolated. By the desulfurization of the substituted derivatives 5b – e , a rearrangement of the intermediates yielded 6 and 7 with a different substitution pattern from that expected from the starting materials (Scheme 3). The additional formation of two isomeric 1,2,5-oxadiazole-3-carboxamides 8 was observed only in the case of 5d (R¹=R²=F) (Scheme 6). Under the same reaction conditions, the major product of the desulfurization of 5c was the quinoxaline-2-carboxamide 1-oxide 9 (Scheme 7). Reaction mechanisms involving intermediate ketene imines and O transfer from the NO₂ group to the neighboring ketene imine are proposed. The structures of 6a , 6e , 6k , 7b , and 8d were established by X-ray crystallography, while the structure of 9 was elucidated by 2D-NMR spectroscopy and corroborated by X-ray crystallography.     

Coordinative Behaviour of Tridentate NS2‐Donor Ligands with Cadmium: Synthesis and Crystal Structures of New Complexes

The reaction of cadmium salts with various amounts of the tridentate NS₂‐chelating ligands 1‐(2‐mercapto‐acetophenone)‐4‐triphenylmethylthiosemicarbazone (H₂L¹) and 1‐(5‐mercapto‐3‐methyl‐1‐phenylpyrazole‐4‐carboxaldehyde)‐4‐triphenyl‐methylthiosemicarbazone (H₂L²) in the presence of bases like N‐methylimidazole (N–MeIm), pyridine (py) or triethylamine (Et₃N) provided a series of novel mono‐, di‐, tri‐ and heptanuclear cadmium complexes. They are of the general formulas [CdL¹(N–MeIm)]₂ ( 1 ), [CdL¹(py)]₂ ( 2 ), [CdL²(N–MeIm)]₂ ( 3 ), [CdL²(py)₃] · 0.25 C₆H₁₄ · 0.5 py ( 4 ), [Et₃NH]₂[Cd₃L ] · 7 MeOH ( 5 ), [Et₃NH]₂[Cd₃L ] ( 6 ) and [Et₃NH]₂[Cd₇L ] · 14 MeOH ( 7 ). The compounds were characterized by elemental analysis, IR‐ and ¹H‐NMR‐spectroscopy. Single‐crystal X‐ray structure analyses are reported for the complexes 2 , 4 , 5 and 7 . While 2 has a dimeric structure where each cadmium ion is pentacoordinated in a N₂S₃‐environment, 4 consists of a monomeric cadmium center with distorted octahedral N₄S₂‐coordination. The complexes 5 and 7 exhibit new structural types for tri‐ and heptanuclear cadmium compounds. It is shown that sulfur bridging might proceed via arylthiolates, iminothiolates or even both functions of the ligand. Aggregation is influenced by various factors like solvents, counterions and ligand properties.     

Benzazole-N(SINGLE BOND)BH3 adducts. Reductive transposition of 2-benzimidazole, 2-benzothiazole,and 2-benzoxazole N(SINGLE BOND)BH3 adducts to 1,3,2-benzimidazaborole, 1,3,2-benzoxaborole,and 1,3,2-benzothiazaborole

1,3,2-Benzimidazaborole, 1,3,2-benzoxaborole, and 1,3,2-benzothiazaborole were synthesized from the corresponding 2-benzazole N(SINGLE BOND)BH₃ and 2-benzazole S(SINGLE BOND)BH₃ adducts through a reductive transposition from the isolobal fragment X(SINGLE BOND)C(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) B(sp³) (X (DOUBLE BOND) N, O, S) to the fragment X(SINGLE BOND)B(sp²) (DOUBLE BOND) N(sp²) (SINGLE BOND) C(sp³). N(SINGLE BOND)BH₃ substitution shifts to lower frequencies 4-H, C-3a, and C-7a resonances. The X-ray diffraction analysis of 2-(o-methoxyphenyl)benzothiazole N(SINGLE BOND)BH₃ adduct is reported. Two new tetracyclic boron-bridged compounds were observed as by-products (6,9-(ethyl)-diaza-2-oxa-1-bora[3,4,7,8]-dibenzobycyclo[4.3.0]-nona-3,7-diene, 6d, and 8-aza-9-oxa-2-thia-1-bora-[3,4,7,8]dibenzobycyclo[3.4.0]nona-3,7-diene, 15d, when 2-(o-methoxyphenyl)-1-ethylbenzimidazole-BH₃ 6b and 2-(o-methoxyphenyl)-benzothiazole-BH₃ 15b adducts were heated. © 1996 John Wiley & Sons, Inc.     

Einkristalluntersuchungen an LiMF6 (M = Rh,Ir), Li2RhF6 und K2IrF6

Single Crystal Investigations on LiMF₆ (M = Rh, Ir), Li₂RhF₆, and K₂IrF₆ LiRhF₆, LiIrF₆, Li₂RhF₆, and K₂IrF₆ were obtained again, but for the first time investigated by single crystal X‐ray methods. Rubyred LiRhF₆ and yellow LiIrF₆ crystallize isostructural in the trigonal space group R3 – C²_3i (Nr. 148) with the lattice parameters LiRhF₆: a = 502.018(7) pm, c = 1355.88(3) pm, Z = 3 and d(Rh–F) = 185.5(1) pm; LiIrF₆: a = 506.148(4) pm, c = 1362.60(2) pm, Z = 3, d(Ir–F) = 187.5(3) pm (LiSbF₆‐Typ). Yellow Li₂RhF₆ crystallizes tetragonal in the space group P4₂/mnm – D¹⁴_4h (Nr. 136) with a = 463.880(8) pm, c = 905.57(2) pm, Z = 2 and d(Rh–F) = 190.3(4)–191.4(3) pm (Trirutil‐Typ). Yellow K₂IrF₆ crystallizes trigonal in the space group P3m1 – D³_3d (Nr. 164) with a = 578.88(7) pm, c = 465.06(5) pm, Z = 1 and d(Ir–F) = 194.0(6) pm, isotypic with K₂GeF₆.     

Darstellung,Kristallstruktur und spektroskopische Eigenschaften der Clusteranionen [(Mo6Br)X]2− mit Xa = F,Cl, Br,I

Synthesis, Crystal Structure and Spectroscopic Properties of the Cluster Anions [(Mo₆Br )X ]^2? with X^a = F, Cl, Br, I The tetrabutylammonium (TBA), tetraphenylphosphonium (TPP) and tetraphenylarsonium (TPAs) salts of the octa-μ₃-bromo-hexahalogeno-octahedro-hexamolybdate(2?) anions [(Mo₆Br)X]^2? (X^a = F, Cl, Br, I) are synthesized from solutions of the free acids H₂[(Mo₆Br)X] · 8 H₂O with X^a = Cl, Br, I. The crystal structures show systematic stretchings in the Mo? Mo bond length and a slight compression of the Brⁱ₈ cube in the F^a to I^a series. The cations do not change much. The i.r. and Raman spectra show at 10 K almost constant frequencies of the (Mo₆Brⁱ₈) cluster vibrations, whereas all modes with X^a ligand contribution are characteristically shifted. The most important bands are assigned by polarization measurements and the force constants are derived from normal coordinate analysis. The ⁹⁵Mo nmr signals are shifted to lower field with increasing electronegativity of the X^a ligands. The fluorine compound shows a sharp ¹⁹F nmr singlet at ?184.5 ppm.     

Étude des Paramètres de Résonance Magnétique Nucléaire et de la Stéréochimie de Thiono-2 R-2 Dithiaphosphorinanes-1,3,2

The ¹H, ¹³C and ³¹P n.m.r. spectra of eleven 2-R-2-thiono-1,3,2-dithiaphosphorinanes with various R groups attached to the phosphorus atom have been recorded and analysed. In the compounds where R=Cl, OMe or N, the molecule adopts a chair conformation with the R group axially oriented. When the molecule adopts a chair conformation with equatorially oriented R. In the case of the derivatives with R=phenyl, Me, N(Me)₂ or NHt-Bu, a chair–chair conformational equilibrium was observed. The hindered rotation about the P? N bond was also examined in the derivative with      

Pr5F[SiO4]2[SeO3]3: Another Complex Fluoride Oxosilicate Oxoselenate(IV)

During attempts to synthesize lanthanoid(III) fluoride oxoselenates(IV) with the simple composition MF[SeO₃], not only Pr₃F[SeO₃]₄, but also Pr₅F[SiO₄]₂[SeO₃]₃ appeared as pale green crystalline by‐products in the case of praseodymium. Pr₅F[SiO₄]₂[SeO₃]₃ crystallizes triclinically in space group P$\bar{1}$ (no. 2) with a = 701.14(5), b = 982.68(7), c = 1286.79(9) pm, α = 70.552(3), β = 76.904(3), γ = 69.417(3)° and Z = 2. The five crystallographically different Pr³⁺ cations on the general positions 2i show coordination numbers of eight and nine. [(Pr1)O₈]^13– and [(Pr2)O₈]^13– polyhedra are connected to$\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains along the [100] direction. [(Pr3)O₇F]^12–, [(Pr4)O₈F]^14– and [(Pr4)O₈F]^14– polyhedra generate [F(Pr3, 4, 5)₃O₁₉]^30– units about their central F^– anion in triangular Pr³⁺ coordination. These units form $\bar{1}$ {[F(Pr3, 4, 5)₃O₁₆]^24–} strands, again running parallel to [100]. Their alternating connection with the $\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains results in $\bar{1}$ {[Pr₅O₂₀F]^26–} sheets parallel to the (001) plane. Like in the already known related compound Er₃F[SiO₄][SeO₃]₂, a three‐dimensional network $\bar{1}$ {[Pr₅O₁₇F]^20–} is achieved without the contribution of both the tetravalent silicon and selenium components. However, two Si⁴⁺ and three Se⁴⁺ cations forming tetrahedral [SiO₄]^4– and ψ¹‐tetrahedral [SeO₃]^2– units with all O^2– anions guarantee the charge balance. The formation of Pr₅F[SiO₄]₂[SeO₃]₃ was observed when praseodymium sesquioxide (Pr₂O₃: in‐situ produced from Pr and Pr₆O₁₁ in a molar ratio of ³/₁₁:⁴/₁₁),praseodymium trifluoride (PrF₃) and selenium dioxide (SeO₂) in 1:1:3 molar ratios were reacted with CsBr as fluxing agent for five days at 750 °C in evacuated fused silica (SiO₂) ampoules.     

Formation of Heptaleno[1,2-c]furans and Heptaleno[1,2-c]furanones

The dehydrogenation reaction of the heptalene-4,5-dimethanols 4a and 4d , which do not undergo the double-bond-shift (DBS) process at ambient temperature, with basic MnO₂ in CH₂Cl₂ at room temperature, leads to the formation of the corresponding heptaleno[1,2-c]furans 6a and 6d , respectively, as well as to the corresponding heptaleno[1,2-c]furan-3-ones 7a and 7d , respectively (cf. Scheme 2 and 8). The formation of both product types necessarily involves a DBS process (cf. Scheme 7). The dehydrogenation reaction of the DBS isomer of 4a , i.e., 5a , with MnO₂ in CH₂Cl₂ at room temperature results, in addition to 6a and 7a , in the formation of the heptaleno[1,2-c]-furan-1-one 8a and, in small amounts, of the heptalene-4,5-dicarbaldehyde 9a (cf. Scheme 3). The benzo[a]heptalene-6,7-dimethanol 4c with a fixed position of the C?C bonds of the heptalene skeleton, on dehydrogenation with MnO₂ in CH₂Cl₂, gives only the corresponding furanone 11b (Scheme 4). By [²H₂]-labelling of the methanol function at C(7), it could be shown that the furanone formation takes place at the stage of the corresponding lactol [3-²H₂]- 15b (cf. Scheme 6). Heptalene-1,2-dimethanols 4c and 4e , which are, at room temperature, in thermal equilibrium with their corresponding DBS forms 5c and 5e , respectively, are dehydrogenated by MnO₂ in CH₂Cl₂ to give the corresponding heptaleno[1,2-c]furans 6c and 6e as well as the heptaleno[1,2-c]furan-3-ones 7c and 7e and, again, in small amounts, the heptaleno[1,2-c]furan-1-ones 8c and 8e , respectively (cf. Scheme 8). Therefore, it seems that the heptalene-1,2-dimethanols are responsible for the formation of the furan-1-ones (cf. Scheme 7). The methylenation of the furan-3-ones 7a and 7e with Tebbe's reagent leads to the formation of the 3-methyl-substituted heptaleno[1,2-c]furans 23a and 23e , respectively (cf. Scheme 9). The heptaleno[1,2-c]furans 6a, 6d , and 23a can be resolved into their antipodes on a Chiralcel OD column. The (P)-configuration is assigned to the heptaleno[1,2-c]furans showing a negative Cotton effect at ca. 320 nm in the CD spectrum in hexane (cf. Figs. 3–5 as well as Table 7). The (P)-configuration of (–)- 6a is correlated with the established (P)-configuration of the dimethanol (–)- 5a via dehydrogenation with MnO₂. The degree of twisting of the heptalene skeleton of 6 and 23 is determined by the Me-substitution pattern (cf. Table 9). The larger the heptalene gauche torsion angles are, the more hypsochromically shifted is the heptalene absorption band above 300 nm (cf. Table 7 and 8, as well as Figs. 6–9).     

Photoelectrochemistry with Colloidal Semiconductors; Laser Studies of Halide Oxidation in Colloidal Dispersions of TiO2 and α-Fe2O3

Aqueous sols of TiO₂ (anatase, particle radius 25 Å) were excited with (347.1 nm)-laser light and the reaction of valence-band holes with halide ions (X = I^?, Br^?, Cl^?) was investigated. Hole transfer takes place within the duration of the (10 ns)-laser pulse and results in the formation of anion radicals according to the sequence: The quantum yield of X increases in the order Cl < Br < I, attaining 0.8 for I at pH 1. It is affected by pH, halide concentration and the presence of a protective agent for the sol. RuO₂ deposited onto TiO₂ enhances markedly Cl and Br -formation, but has no effect on the yield of I. Laser-photolysis investigation of halide oxidation were also carried out with colloidal Fe₂O₃ (particle radius 600 Å). For I_2?formation, the quantum yield exceeds 0.9 indicating almost quantitative hole scavenging by iodide.     

Darstellung, 19F-NMR-spektroskopischer Nachweis und Untersuchung zur Bildung der metallgemischten Clusteranionen [(Mo6−nWnCl)F]2−, n = 0−6

Preparation, ¹⁹F NMR Spectroscopic Evidence and Study of the Formation of Metal-Mixed Cluster Anions [(Mo_6?nW_nCl )F ]^2?, n = 0?6 The complete system of metal-mixed octahedral cluster ions [(Mo_6?nW_nCl)F]^2?, n = 0?6, is prepared by tempering Mo powder with WCl₆ at 600°C. A mixture containing inclusively the geometric isomers (n = 2, 3, 4) all ten possible species is transferred into the tetra-n-butylammonium salts (TBA)₂[(Mo_6?nW_nCl)F]. In the ¹⁹F nmr spectrum the 24 expected signals are observed, assigned on the basis of their chemical shifts, multiplicities and intensities, and confirmed by a 2D-¹⁹F-¹⁹F COSY spectrum. From the integrated intensities the distribution of the different components is derived revealing a non-statistical formation, in that isomers with Mo…?Mo or W…?W atoms in trans-positions in comparision to those with mixed Mo…?W axes are favoured, and that especially the homoleptic compounds Mo₆ and W₆ are present to an over-average extent. Evaluation of ¹⁹F chemical shifts reveals that F bound to W which is in antipodal position to Mo resonates at higher field compared to F bound to W in a W…?W arrangement, caused by an increased shielding, which is synonymous to a positive antipodal-effect by Mo. Vice versa F bound to Mo with an antipodal W resonates at lower field compared with F bound to Mo in an Mo…?Mo arrangement caused by an increased deshielding and synonymous a negative antipodal-effect by W. The chemical shifts, resulting from antipodal-effects, are different for the compounds within the [(Mo_6?nW_nCl)F]^2? - system. The difference of the antipodal effect of successive substitution products results in characteristic values designated as antipodal shift constants, depending on the kind of substituents, which is valid for other cluster systems, too.     

Fragmentations of protonated acetophenones via intermediate ion–molecule complexes

Protonated acetophenones, substituted with a methoxymethyl group in the para and meta positions, have been generated by electron impact induced fragmentation of the correspondingly substituted 2-phenylpropan-2-ols. The metastable ions, formed in the second field-free region of a VG ZAb 2F mass spectrometer, react unimolecularly by elimination of CH₃OH, formation of CH₃CO⁺ and ions, loss of CH₃COOCH₃, and loss of CH₂O. The mechanisms of these fragmentations have been elucidated with the aid of deuterated analogues of the protonated acetophenones. It is shown that these reactions are initiated by an endothermic transfer of the proton at the carbonyl group of the protonated acetophenones to the benzene ring. A further migration of the proton to the ether O atom of the methoxymethyl side-chain leads eventually to the elimination of CH₃OH. Protolytic bond cleavages of either side-chain gives rise to the CH₃CO⁺ and ions. At low internal energies both these ions may be trapped by the aromatic neutral fragment in ion-molecule complexes. Reactions within these complexes result in the energetically favourable losses of CH₃COOCH₃ and CH₂O, respectively. With respect to these reactions, the protonated acetophenones behave analogously to the correspondingly substituted and protonated benzaldehydes.     

Ein neues Selten‐Erd‐Metall(III)‐Fluorid‐Oxoselenat(IV): YF[SeO3]

A New Rare‐Earth Metal(III) Fluoride Oxoselenate(IV): YF[SeO₃] Just two representatives of the rare‐earth metal(III) fluoride oxoselenates(IV) with the formula type MF[SeO₃] (M = La and Lu) exist so far, whereas for the intermediate lanthanoids only M₃F[SeO₃]₄‐type compounds (M = Gd and Dy) were accessible. Because of the similar radius of Y³⁺ to the radii of the heavier lanthanoid cations, a missing link within the MF[SeO₃] series could be synthesized now with the example of yttrium(III) fluoride oxoselenate(IV). Contrary to LuF[SeO₃] with its triclinic structure, YF[SeO₃] crystallizes monoclinically in space group P2₁/c (no. 14, a = 657.65(7), b = 689.71(7), c = 717.28(7) pm, β = 99.036(5)° and Z = 4). A single Y³⁺ cation occupying the general site 4e is surrounded by six oxide and two fluoride anions forming [YO₆F₂]^11? polyhedra (d(Y–O) = 228–243 plus 263 pm, d(Y–F) = 219–220 pm). These are linked via common O···O edges to chains running along [010] and adjacent chains get tied to each other by sharing common O3···O3 and O3···F edges which results in sheets parallel to (100). The Se⁴⁺ cations connect these sheets as ψ¹‐tetrahedral [SeO₃]^2? anions (d(Se–O) = 168–174 pm) for charge balance via all oxygen atoms. Despite the different coordination numbers of seven and eight for the rare‐earth metal(III) cations the structures of LuF[SeO₃] and YF[SeO₃] appear quite similar. The chains containing pentagonal bipyramids [LuO₅F₂]^9? are connected to layers running parallel to the (100) plane again. In fact it is only necessary to shorten the partial structure of the straight chains along [001] to achieve the angular chains in YF[SeO₃]. As a result of this shortening one oxide anion at a time moves into the coordination sphere of a neighboring Y³⁺ cation and therefore adds up the coordination number for Y³⁺ to eight. For the synthesis of YF[SeO₃] yttrium sesquioxide (Y₂O₃), yttrium trifluoride (YF₃) and selenium dioxide (SeO₂) in a molar ratio of 1 : 1 : 3 with CsBr as fluxing agent were reacted within five days at 750 °C in evacuated graphitized silica ampoules.     

Reaktionen von Fluorphosphoranen mit dem N,O-Bis(trimethylsilyl)-Derivat des o-Aminophenols

Reactions of Fluorophosphoranes with the N,O-Bis(trimethylsilyl) Derivative of o-Aminophenol The reaction of the N,O-bis(trimethylsilyl) derivative of o-aminophenol, 5 , with the tetrafluorophosphoranes, RPF₄, 2a–2d , (R = F, Me, Ph, and 1-adamantyl) in a 1:1 molar ratio led to monocyclic-1,3,2λ⁵-4,5-benzoxazaphospholes, C₆H₄(O)(NH)PF₂R, 6a–6d . ¹⁹F n.m.r. spectroscopic studies suggest a trigonal-bipyramidal structure with the C₆H₄(O)(NH) grouping attached to one axial and one equatorial position at five-coordinate phosphorus for these compounds. The spirophosphoranes, [C₆H₄(O)(NH)]₂PR, 8a – 8d (R = F, Me, Ph, 1-adamantyl) were obtained from the reaction of the appropriate tetrafluorophosphorane, RPF₄, 2a – 2d with 5 in a 1:2 molar ratio. The compounds 8a – 8d also result from a spontaneous scrambling reaction of 6a – 6d , with the corresponding tetrafluorophosphoranes, RPF₄ ( 2a – 2d ) as the other product. Reaction of the difluorophosphorane, Bu₃ⁿPF₂ with 5 and with N,N′-dimethyl-N,N′-bis(trimethylsilyl)urea furnished the cyclic, fluorine-free phosphoranes, 9 and 10 , respectively. The phosphonium bromide, Bu₃ⁿPFBr, reacted with 5 in a 1:1 and a 2:1 molar ratio to produce the ionic compounds, [C₆H₄(OSiMe₃)(NHPBu₃ⁿ)]⁺Br^?, 11 , and [C₆H₄(OPBu₃ⁿ)HNPBu₃ⁿ]²⁺ 2 Br^?, 12 , respectively.