Electroinduced oxidative copolymerization of N‐vinyl carbazole with methyl ethyl ketone formaldehyde resin

In this study, a novel procedure to obtain the non‐crosslinked, photoconductive, white form of the linear copolymer of N‐vinyl carbazole (NVCz) and methyl ethyl ketone formaldehyde resin (MEKF‐R) is reported. A possible mechanism of copolymerization is suggested. The yield of the copolymer is increased almost 10 times by the addition of catalytic amounts of ceric ammonium nitrate as an oxidant during the electrochemical polymerization of NVCz in the presence of MEKF‐R in a divided electrochemical cell. Since cerium(III) is readily oxidized to cerium(IV) at the anode, the concentration of cerium(IV) remained constant and the deposition of green poly(NVCz) can be prevented. Copyright © 2004 John Wiley & Sons, Ltd.     

Electrochemical Behavior of Ce(IV)/Ce(III) Couple in N,N-Di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-Di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-Di(2-ethylhexyl)-3,3-dimethyl Butanamide (DEHDMBA)

In this work we report on the electrochemical behavior of Ce(IV)/Ce(III) redox couple in pure N,N-dialkyl amides (N,N-DA), namely N,N-di(2-ethylhexyl)-n-butanamide (DEHBA), N,N-di(2-ethylhexyl)-iso-butanamide (DEHiBA), and N,N-di(2-ethylhexyl)-3,3-dimethyl butanamide (DEHDMBA) equilibrated with nitric aqueous solutions as an entry to the direct electrochemical characterization of plutonium in these extractants. Ce(IV)/Ce(III) redox process was used as a model. Its potential (E_1/2≅1.02 V/SCE) is not affected by the temperature and the nature of the N,N-DA and this clearly indicates that the functionalities of these extractants produce the same relative effect on both +IV and +III oxidation states of the cerium cation. Linear variations of the current intensity of the reduction peak of Ce(IV) with the concentration of Ce(IV)/N,N-DAs/HNO₃(5 M) solutions were obtained from cyclic voltammograms recorded at 25 °C and 40 °C. Due to the poor definition of the voltammograms in DEHiBA and DEHDMBA, such characterization allows only the evaluation of the performances of the chemical extraction of Ce(IV) from aqueous nitric acid solution by the undiluted DEHBA. To our knowledge, the electrochemical behavior of Ce(IV)/Ce(III) in N,N-DAs was not previously studied and our findings will for sure open the door for further investigations in this field.     

Synthesis of crosslinked poly(butyl methacrylate‐co‐pentaerythritol triacrylate) gel by single electron transfer‐living radical polymerization and its oil‐absorbing properties

A novel high oil‐absorbing crosslinked gel was synthesized by copolymerization of butyl methacrylate (BMA) with a small amount of pentaerythritol triacrylate (PETA) crosslinker using single electron transfer‐living radical polymerization (SET–LRP) initiated with carbon tetrachloride (CCl₄) and catalyzed by Cu(0)/hexamethylenetetramine (HMTA) in N, N‐dimethylformamide (DMF). The polymerization followed first‐order kinetics as indicated by linear increase of monomer concentration with reaction time. Effects of reaction temperature, crosslinker, initiator, and catalyst on the oil‐absorbing properties of the crosslinked gel were investigated in detail. The oil absorptions of the crosslinked gel to chloroform, toluene could reach 51.9, 34.5 g/g, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐step synthesis of poly(N‐vinylpyrrolidone)‐b‐poly(l‐lactide) block copolymers using a dual initiator for RAFT polymerization and ROP

Amphiphilic, biocompatible poly(N‐vinylpyrrolidone)‐b‐poly(l ‐lactide) (PVP‐b‐PLLA) block polymers were synthesized at 60 °C using a hydroxyl‐functionalized N,N‐diphenyldithiocarbamate reversible addition–fragmentation chain transfer (RAFT) agent, 2‐hydroxyethyl 2‐(N,N‐diphenylcarbamothioylthio)propanoate (HDPCP), as a dual initiator for RAFT polymerization and ring‐opening polymerization (ROP) in a one‐step procedure. 4‐Dimethylamino pyridine was used as the ROP catalyst for l ‐lactide. The two polymerization reactions proceeded in a controlled manner, but their polymerization rates were affected by the other polymerization process. This one‐step procedure is believed to be the most convenient method for synthesizing PVP‐b‐PLLA block copolymers. HDPCP can also be used for the one‐step synthesis of poly(N‐vinylcarbazole)‐b‐PLLA block copolymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1607–1613     

Oxidative polymerization of acrylamide in the presence of thioglycolic acid

Chemical polymerization of acrylamide at room temperature was examined by using thioglycolic acid-cerium (IV) sulfate and thioglycolic acid-KMnO₄ redox systems in acid aqueous medium. Water soluble polyacrylamides containing thioglycolic acid end groups were synthesized. The effects of the molar ratio of acrylamide to Ce(IV) n _AAm /n _Ce(IV) , the polymerization time, the temperature, the monomer concentration, the molar ratio of cerium (IV) sulfate to thioglycolic acid and the concentration of sulfuric acid on the yield and molecular weight of polymer were investigated. Lower molar ratios of acrylamide/Ce(IV) at constant monomer concentration resulted in an increase in the yield but a decrease in molecular weight of polymer. The increase of reaction temperature from 20 to 70°C resulted in a decrease in the yield but generally resulted in a constant value for the molecular weight of polymer. With increasing polymerization time, the yield and molecular weight of polymer did not change substantially. Ce(IV) and Mn(VII) ions are reduced to Ce(III) and Mn(II) ions respectively in the polymerization reaction. The existence of Ce(III) ion bound to polymer was investigated by UV-visible spectrophotometry and fluoresce measurements. The amount of Mn(II) incorporated into the polymer was determined using graphite furnace atomic absorption spectrometry. The mechanism of this phenomenon is discussed.     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

In situ access to white light‐emitting fluorescent polymer nanocomposites via plasma‐ignited frontal polymerization

We describe a facile fabrication of white light‐emitting cadmium sulfide (CdS)‐poly(HEA‐co‐NVK) nanocomposites [2‐hydroxyethyl acrylate (HEA) and N‐vinylcarbazole (NVK)] via plasma‐ignited frontal polymerization (PIFP), a novel and rapid reaction mode of converting monomers into polymers in minutes. Frontal polymerization was initiated by igniting the upper side of the reactant with plasma. Once initiated, no additional energy was required for the polymerization to occur. The chemical functional groups of the as‐prepared nanocomposites were thoroughly investigated using Fourier transform infrared spectra. The dependence of the front velocity and front temperature on the initiator concentration and weight ratios of HEA/NVK was also investigated in detail. Perhaps more interestingly, the white light‐emitting materials synthesized by ingeniously incorporating the compensating colors of yellow emitting from 3‐(trimethoxysilyl)‐1‐propanethiol‐capped CdS nanocrystals and blue emitting from carbazole‐containing polymer were conveniently applied onto a commercial UV light‐emitting diode (LED) to generate white LEDs. The subtle change in the weight ratios of CdS/NVK can significantly impact the color hue. The white light becomes gradually colder with the increase of NVK, but becomes gradually warmer with the increase concentration of CdS nanocrystals. In a broad perspective, these white light‐emitting materials designed by PIFP approach will open a new pathway to develop “QD‐polymer nanocomposite down‐conversion LED” in a fast and efficient way. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of ultrahigh molecular weight poly(N‐vinylcarbazole) with a high yield using low‐temperature heterogeneous‐solution polymerization

To prepare ultrahigh molecular weight (UHMW) poly(N‐vinylcarbazole) (PVCZ) with a high conversion, I heterogeneous‐solution‐polymerized N‐vinylcarbazole (VCZ) in methanol/tertiary butyl alcohol (TBA) at 25, 35, and 45 °C with a low‐temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN), and I investigated the effects of the polymerization conditions on the polymerization behavior and molecular parameters of PVCZ. A low‐polymerization temperature with ADMVN, a heterogeneous system with methanol, and a low chain transfer with TBA proved to be successful in obtaining PVCZ of UHMW [weight‐average molecular weight (M_w) > 3,000,000] and high conversion (>80%) with a smaller temperature rise during polymerization but still of free‐radical polymerization by an azoinitiator. The polymerization rate of VCZ in methanol/TBA at 25 °C was proportional to the 0.97 power of the ADMVN concentration, indicating a heterogeneous nature for the polymerization. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ produced in methanol/TBA at 25 °C with an ADMVN concentration of 0.0001 mol/mol of VCZ, an M_w of 3,230,000 was obtained, with a polydispersity index of 2.4. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 539–545, 2001     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.     

Preparation of monodisperse poly(St‐co‐PETEA) microspheres by precipitation polymerization using ethanol as solvent

Precipitation polymerization of styrene (St) was carried out with pentaerythritol tetraacrylate (PETEA) to produce monodisperse crosslinked microspheres. A much safer ethanol replaced acetonitrile as a solvent in precipitation polymerization of monodisperse crosslinked poly(St‐co‐PETEA) microspheres. Monodisperse crosslinked microspheres with high monomer conversion were achieved within 4 hr. Uniform and well‐separated monodisperse were obtained in ethanol when PETEA concentration varied from 30 vol% to 90 vol% and the particle diameter decreased from 0.75 to 0.58 µm. The particle yield increased from 36.51 to 64.38% by increase in the initiator loading from 1 to 8 wt%. No coagulum occurred between particles when the polymerization time varied from 2 to 10 hr. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of 4‐Imino‐2H,3H,5H‐[1,2,5]thiadiazolidin‐1‐oxide through Cycloaddition Reaction of N‐Sulphinylanilines and N‐(α‐Cyano‐α‐aryl)‐methylanilines

Through the normal mode of cycloaddition reaction of N‐(α‐cyano‐α‐aryl)‐methylanilines ( II ) onto N‐sulphinylanilines ( III ) has provided 2,3,5‐triaryl‐4‐imino‐2H,3H,5H‐[1,2,5]thiadiazolidin‐1‐oxides ( IV ). The present protocol has advantage of convenient operation to synthesize heterocyclics in good yield.     

Kinetic study of the Ce(III)‐, Mn(II)‐, or ferroin‐catalyzed Belousov‐Zhabotinsky reaction with pyruvic acid

The Ce(III)‐, Mn(II)‐, or ferroin (Fe(phen)₃²⁺)‐catalyzed reaction of bromate ion and pyruvic acid (PA) or its dimer exhibits oscillatory behavior. Both the open‐chain dimer (parapyruvic acid, γ‐methyl‐γ‐hydroxyl‐α‐keto‐glutaric acid, DPA1) and the cyclic‐form dimer (α‐keto‐γ‐valerolactone‐γ‐carboxylic acid, DPA2) show more sustained oscillations than PA monomer. Ferroin behaves differently from Ce(III) or Mn(II) ion in catalyzing these oscillating systems. The kinetics of reactions of PA, 3‐brompyruvic acid (BrPA), DPA1, or DPA2 with Ce(IV), Mn(III), Fe(phen)₃³⁺ ion were investigated. The order of relative reactivity of pyruvic acids toward reaction with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is DPA2 > DPA1 > BrPA > PA and that of metal ions toward reaction with pyruvic acids is Mn(III) > Ce(IV) > Fe(phen)₃³⁺. The rates of bromination reactions of pyruvic acids are independent of the concentration of bromine and the order of reactivity toward bromination is (DPA1, DPA2) > BrPA > PA. Experimental results are rationalized. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 408–418, 2000     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov‐Zhabotinsky reaction with 2‐ketoglutaric acid

The Belousov‐Zhabotinsky (BZ) reaction of bromate ion with 2‐ketoglutaric acid (KGA) in aqueous sulfuric acid catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion exhibits sustained barely damped oscillations under aerobic conditions. In general, the reaction oscillates without an induction period. Fe(phen)₃²⁺ ion behaves differently from Ce(III) and Mn(II) ions in catalyzing this oscillating system. The gem‐diol form of KGA exhibits different behavior from that of the keto form of KGA in the BZ reaction. The kinetics and mechanism of the reaction of KGA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was investigated. The order of relative reactivities of metal ions toward reaction with KGA is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺. Experimental results are rationalized. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 101–107, 2001     

Synthesis of diblock copolymers containing poly(N‐vinylcarbazole) by reversible addition‐fragmentation chain transfer polymerization

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐vinylcarbazole (NVK) mediated by macromolecular xanthates was used to prepare three types of block copolymers containing poly(N‐vinylcarbazole) (PVK). Using a poly(ethylene glycol) monomethyl ether based xanthate ( PEG‐X ), the RAFT polymerization of NVK proceeded in a controlled way to afford a series of PEG‐b‐PVK with different PVK chain lengths. Successive RAFT polymerization of NVK and vinyl acetate (VAc) with a small molecule xanthate ( X1 ) as the chain transfer agent was tested to prepare PVK‐b‐PVAc. Though both monomers can be homopolymerized in a controlled manner with this xanthate, only by polymerizing NVK first could give well‐defined block copolymers. The xanthate groups in the end of PVK could be removed by radical‐induced reduction using tributylstannane, and PVK‐b‐PVA was obtained by further hydrolysis of PVK‐b‐PVAc under basic conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov–Zhabotinsky reaction with ethyl hydrogen malonate

In a stirred batch reaction, Fe(phen)₃²⁺ ion behaves differently from Ce(III) or Mn(II) ion in catalyzing the bromate‐driven oscillating reaction with ethyl hydrogen malonate [CH₂COOHCOOEt, ethyl hydrogen malonate (EHM)]. The effects of N₂ atmosphere, concentrations of bromate ion, EHM, metal ion catalyst, sulfuric acid, and additive (bromide ion or bromomalonic acid) on the pattern of oscillations were investigated. The kinetic study of the reaction of EHM with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion indicates that under aerobic or anaerobic conditions the order of reactivity toward reacting with EHM is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺, which follows the same trend as that of the malonic acid system. The presence of the ester group in EHM lowers the reactivity of the two methylene hydrogen atoms toward bromination or oxidation by Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion. No good oscillations were observed for the BrO₃₋‐CH₂(COOEt)₂ reaction catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion. A discussion of the effects of oxygen on the reactions of malonic acid and its derivatives (RCHCOOHCOOR′) with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is also presented. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 52–61, 2000     

Three sterically hindered 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate derivatives

In the title compounds, 2‐methoxyethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₄, (II), isopropyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₃, (III), and ethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₀H₁₈N₂O₃, (IV), the heterocyclic pyran ring adopts a flattened boat conformation. In (II) and (III), the carbonyl group and a double bond of the heterocyclic ring are mutually anti, but in (IV) they are mutually syn. The ester O atoms in (II) and (III) and the carbonyl O atom in (IV) participate in intramolecular C—H...O contacts to form six‐membered rings. The dihedral angles between the naphthalene substituent and the closest four atoms of the heterocyclic ring are 73.3 (1), 71.0 (1) and 74.3 (1)° for (II)–(IV), respectively. In all three structures, only one H atom of the NH₂ group takes part in N—H...O [in (II) and (III)] or N—H...N [in (IV)] intermolecular hydrogen bonds, and chains [in (II) and (III)] or dimers [in (IV)] are formed. In (II), weak intermolecular C—H...O and C—H...N hydrogen bonds, and in (III) intermolecular C—H...O hydrogen bonds link the chains into ladders along the a axis.     

Hydrogen‐bonded structures of the isomeric compounds of quinoline with 2‐chloro‐5‐nitrobenzoic acid, 3‐chloro‐2‐nitrobenzoic acid, 4‐chloro‐2‐nitrobenzoic acid and 5‐chloro‐2‐nitrobenzoic acid

The structures of four isomeric compounds, all C₇H₄ClNO₄·C₉H₇N, of quinoline with chloro‐ and nitro‐substituted benzoic acid, namely, 2‐chloro‐5‐nitrobenzoic acid–quinoline (1/1), (I), 3‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (II), 4‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (III), and 5‐chloro‐2‐nitrobenzoic acid–quinoline (1/1), (IV), have been determined at 185 K. In each compound, a short hydrogen bond is observed between the pyridine N atom and a carboxyl O atom. The N...O distances are 2.6476 (13), 2.5610 (13), 2.5569 (12) and 2.5429 (12) Å for (I), (II), (III) and (IV), respectively. Although in (I) the H atom in the hydrogen bond is located at the O site, in (II), (III) and (IV) the H atom is disordered in the hydrogen bond over two positions with (N site):(O site) occupancies of 0.39 (3):0.61 (3), 0.47 (3):0.53 (3) and 0.65 (3):0.35 (3), respectively.     

Modification of porous suspension‐PVC particles by stabilizer‐free aqueous dispersion polymerization of absorbed acrylate monomers

The present study describes modification of porous PVC particles by polymerization of a monomer/crosslinker/peroxide solution absorbed within the PVC particles. The modifying crosslinked polymers include butyl acrylate (BA) crosslinked with ethylene glycol dimethacrylate (EGDMA) and ethylhexyl acrylate (EHA) crosslinked with EGDMA. The monomer solution is blended with the PVC particles by dry‐blending. The monomer absorbed particles are then polymerized in a stabilizer‐free aqueous dispersion‐polymerization. The modified semi‐IPN PVC particles have better stability than the neat PVC particles in packed columns for absorption of halo‐organics from water, etc. The modified semi‐IPN PVC particles are melt processable and thus have the potential of being interesting and useful modified rigid PVC materials. The modified PVC particles characterization includes polymerization yield, non‐extractables and porosity measurements and also morphology and dynamic mechanical behavior (DMTA). PBA and PEHA polymerization has shown high yield levels. The high conversion of BA and EHA within the particle, is partly due to their low solubility in water. The levels of non‐extractable fractions found are indicative of low chemical interaction between the polyacrylate/PVC phases in the particle. The modified PVC particle's porosity levels indicate that BA and EHA partly polymerize within the PVC particles' bulk and partly in the pores as crusts covering the PVC pore surfaces. This finding is supported by SEM observations of unetched and etched freeze fractured surfaces. Higher crosslinking levels of the polyacrylate modification promote compatibility with the PVC particles' bulk. DMTA measurements show two loss modulus peaks for the 0.5%EGDMA blends in the glass transition temperature region, suggesting imcompatibility. However, at 5%EGDMA a single transition is found exhibiting enhanced compatibility owing to the high degree of crosslinking, which prevents phase separation. Copyright © 2002 John Wiley & Sons, Ltd.     

Spectroscopic,electrochemical, and structural aspects of the Ce(IV)/Ce(III) DOTA redox couple chemistry in aqueous solutions

The redox potential of the Ce(IV)/Ce(III) DOTA is determined to be 0.65 V versus SCE, pointing out a stabilization of ~13 orders of magnitude for the Ce(IV)DOTA complex, as compared to Ce(IV)_aq. The Ce(III)DOTA after electrochemical oxidation yields a Ce(IV)DOTA complex with a t_1/2 ~3 h and which is suggested to retain the “in cage” geometry. Chemical oxidation of Ce(III)DOTA by diperoxosulfate renders a similar Ce(IV)DOTA complex with the same t_1/2. From the electrochemical measurements, one calculates logK (Ce(IV)DOTA^2?) ~ 35.9. Surprisingly, when Ce(IV)DOTA is obtained by mixing Ce(IV)_aq with DOTA, a different species is obtained with a 2 : 1(M : L) stoichiometry. This new complex, Ce(IV)DOTACe(IV), shows redox and spectroscopic features which are different from the electrochemically prepared Ce(IV)DOTA. When one uses thiosulfate as a reducing agent of Ce(IV)DOTACe(IV), one gets a prolonged lifetime of the latter. The reductant seems to serve primarily as a coordinating ligand with a geometry which does not facilitate inner sphere electron transfer. The reduction process rate in this case could be dictated by an outer sphere electron transfer or DOTA exchange by S₂O₃^2?. Both Ce(IV)DOTA and Ce(IV)DOTACe(IV) have similar kinetic stability and presumably decompose via decarboxylation of the polyaminocarboxylate ligand.     

Hollow‐fiber liquid‐phase microextraction for the direct determination of flumequine in urban wastewaters by flow‐injection analysis with terbium‐sensitized chemiluminescence

A flow‐injection analysis chemiluminescence method based on the enhancement effect of the flumequine‐Tb(III) complex on the weak native emission of the Ce(IV)‐Na₂SO₃ system has been developed for the determination of flumequine. The method includes a cleanup and preconcentration stage (750‐fold) of the sample by hollow‐fiber liquid‐phase microextraction using an Accurel^® Q 3/2 polypropylene hollow fiber impregnated with 1‐octanol as the supported liquid membrane. The obtained 50 μL acceptor phase was injected in a 1 mM Tb(III) + 4 mM Ce(IV) in 5% v/v H₂SO₄ stream and mixed with a 2 mM Na₂SO₃ stream before its introduction into the flow cell. The chemiluminescence signal was linear in the 0.3–15 ng/mL range, with detection and quantitation limits of 0.1 and 0.3 ng/mL, respectively. The method allows the selective extraction and determination of flumequine in wastewater samples, using simpler and lower‐cost instrumentation and with shorter extraction and analysis times than traditional high‐performance liquid chromatography analysis.