Synthese und Struktur chiraler Heterometallatetrahedrane des Typs [Re2(M1PPh3)(M2PPh3)(μ‐PCy2)(CO)7C≡CPh] (M1 = Ag,Au; M2 = Cu,Ag, Au)

Syntheses and Structure of Chiral Metallatetrahedron Complexes of the Type [Re₂(M¹PPh₃)(M²PPh₃)(μ‐PCy₂)(CO)₇C≡CPh] (M¹ = Ag, Au; M² = Cu, Ag, Au) From the reaction of Li[Re₂(μ‐H)(μ‐PCy₂)(CO)₇(C(Ph)O)] ( 1 ) with Ph₃AuC≡CPh both benzaldehyde and the trinuclear complex Li[Re₂(AuPPh₃)(μ‐PCy₂)(CO)₇C≡CPh] ( 2a ) were obtained in high yield. The complex anion was isolated as its PPh₄‐salt 2b . The latter reacts with coinage metal complexes PPh₃M²Cl [M² = Cu, Ag, Au] to give chiral heterometallatetrahedranes of the general formula [Re₂(AuPPh₃)(M²PPh₃)(μ‐PCy₂)(CO)₇C≡CPh] (M² = Cu 3a , Ag 3b , Au 3c ). The corresponding complex [Re₂(AgPPh₃)₂(μ‐PCy₂)(CO)₇C≡CPh] ( 3d ) is obtained from the reaction of [Re₂(AgPPh₃)₂(μ‐PCy₂)(CO)₇Cl] ( 4 ) with LiC≡CPh. 3d undergoes a metathesis reaction in the presence of PPh₃CuCl giving [Re₂(AgPPh₃)(CuPPh₃)(μ‐PCy₂)(CO)₇C≡CPh] ( 3e ) and PPh₃AgCl. Analogous metathesis reactions are observed when 3c is reacted with PPh₃AgCl or PPh₃CuCl giving 3a or 3b , respectively. The reaction of 1 with PPh₃AuCl gives benzaldehyde and Li[Re₂(AuPPh₃)(μ‐PCy₂)(CO)₇Cl] ( 5a ) which upon reaction with PhLi forms the trinuclear complex Li[Re₂(AuPPh₃)(μ‐PCy₂)(CO)₇Ph] ( 6a ). Again this complex was isolated as its PPh₄‐salt 6b . In contrast to 2b , 6b reacts with one equivalent of Ph₃PAuCl by transmetalation to give Ph₃PAuPh and PPh₄[Re₂(AuPPh₃)(μ‐PCy₂)(CO)₇Cl] ( 5b ). The X‐ray structures of the compounds 3a , 3b , 3e and 4 are reported.     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Sulfur‐assisted Chloride and Triphenylphosphine Dissociation of Palladium(II) Complex with Phenyloxythiocarbonyl,PhOC(S), Containing Ligand: X‐Ray Structure of [Pd(PPh3)2{η1‐C(S)OPh}(Cl)]

Treatment of Pd(PPh₃)₄ with phenylchlorothionoformate, PhOC(S)Cl, in dichloromethane at ?20 °C produces the phenyloxythiocarbonyl complex [Pd(PPh₃)₂{η¹‐C(S)OPh}(Cl)], 1 . The ³¹P{¹H} NMR spectrum of 1 shows the dissociation of either the chloride or the triphenylphosphine ligand to form complex [Pd(PPh₃)₂(η²‐SCOPh)][Cl], 2 or the dipalladium complex [Pd(PPh₃)Cl]₂(μ,η²‐SCOPh)₂, 3 . Continuous stirring of the dichloromethane solution of 1 at room temperature for 4 h forms the dipalladinum complex [Pd(PPh₃)Cl]₂(μ,η²‐SCOPh)₂, 3 as the final product. Respective reactions of 1 and Et₂NCS₂Na or dppa {bis(diphenylphosphino)amine} gives complex [Pd(PPh₃){η¹‐C(S)OPh}(η²‐S₂CNEt₂)], 4 or [Pd(PPh₃){η¹‐C(S)OPh}(η²‐dppa)][Cl], 5 . Complex 1 is determined by single‐crystal X‐ray diffraction and crystallized in the monoclinic space group P2₁ with Z = 4. The cell dimensions of 1 are as follows: a = 9.5613(1) Å, b = 33.6732(3) Å, c = 12.2979(1) Å.     

Metal catalysed Brooke rearrangement of 3-Halo-1-(trimethylsilyl) propan-2-one (Halo = Cl or Br)

The complexes [IrH(CO)(PPh₃)₃], trans-[IrCI(CO)- (PPh₃)₂], [RhH(PPh₃)₄], [Pd(PPh₃)₄], [Pt(trans-stilbene)(PPh₃)₂] and [Pt(η³-CH₂-COCH₂)-(PPh₃)₂] catalyse the rearrangement of Me₃SiCH₂C(O)CH₂Cl to CH₂?C(OSiMe₃)-CH₂Cl.     

Synthesis,structural, electrochemical,and spectroscopic studies of some (diimine)ruthenium nitrile complexes

The syntheses of cationic ruthenium(II) complexes [Ru(Me₂-bpy)(PPh₃)₂RR?][PF₆]_x {Me₂-bpy = 4,4?-dimethyl-2,2?-bipyridine, (3) R = Cl, R? = N≡CMe, x = 1, (4) R = Cl, R? = N≡CPh, x = 1, (5) R = R? = N≡CMe, x = 2} and [Ru(Me₂-bpy)(κ²-dppf)RR?][PF₆]_x {dppf = 1,1?-bis(diphenylphosphino)ferrocene, (6) R = Cl, R? = N≡CMe, x = 1, (7) R = Cl, R? = N≡CPh, x = 1, (8) R = R? = N≡CMe, x = 2} are reported, together with their structural confirmation by NMR (³¹P, ¹H) and IR spectroscopy and elemental analysis, and, in the case of trans-[Ru(Me₂-bpy)(PPh₃)₂(N≡CCH₃)Cl][PF₆] (3), by X-ray crystallography. Electronic absorption and emission spectra of the complexes reveal that all complexes except 4 and 6 are emissive in the range 370–400 nm with 8 exhibiting an emission in the blue. Cyclic voltammetry studies of 3–8 show reversible or quasi-reversible redox processes at ca. 1 V, assigned to the Ru(II/III) couple.     

Further Evidence for ‘Extended’ Cumulene Complexes: Derivatives from Reactions with Halide Anions and Water

Reactions of [Ru{C=C(H)-1,4-C₆H₄C≡CH}(PPh₃)₂Cp]BF₄ ([ 1 a ]BF₄) with hydrohalic acids, HX, results in the formation of [Ru{C≡C-1,4-C₆H₄-C(X)=CH₂}(PPh₃)₂Cp] [X=Cl ( 2 a-Cl ), Br ( 2 a-Br )], arising from facile Markovnikov addition of halide anions to the putative quinoidal cumulene cation [Ru(=C=C=C₆H₄=C=CH₂)(PPh₃)₂Cp]⁺. Similarly, [M{C=C(H)-1,4-C₆H₄-C≡CH}(LL)Cp ]BF₄ [M(LL)Cp’=Ru(PPh₃)₂Cp ([ 1 a ]BF₄); Ru(dppe)Cp* ([ 1 b ]BF₄); Fe(dppe)Cp ([ 1 c ]BF₄); Fe(dppe)Cp* ([ 1 d ]BF₄)] react with H⁺/H₂O to give the acyl-functionalised phenylacetylide complexes [M{C≡C-1,4-C₆H₄-C(=O)CH₃}(LL)Cp’] ( 3 a – d ) after workup. The Markovnikov addition of the nucleophile to the remote alkyne in the cations [ 1 a–d ]⁺ is difficult to rationalise from the vinylidene form of the precursor and is much more satisfactorily explained from initial isomerisation to the quinoidal cumulene complexes [M(=C=C=C₆H₄=C=CH₂)(LL)Cp’]⁺ prior to attack at the more exposed, remote quaternary carbon. Thus, whilst representative acetylide complexes [Ru(C≡C-1,4-C₆H₄-C≡CH)(PPh₃)₂Cp] ( 4 a ) and [Ru(C≡C-1,4-C₆H₄-C≡CH)(dppe)Cp*] ( 4 b ) reacted with the relatively small electrophiles [CN]⁺ and [C₇H₇]⁺ at the β-carbon to give the expected vinylidene complexes, the bulky trityl ([CPh₃]⁺) electrophile reacted with [M(C≡C-1,4-C₆H₄-C≡CH)(LL)Cp’] [M(LL)Cp’=Ru(PPh₃)₂Cp ( 4 a ); Ru(dppe)Cp* ( 4 b ); Fe(dppe)Cp ( 4 c ); Fe(dppe)Cp* ( 4 d )] at the more exposed remote end of the carbon-rich ligand to give the putative quinoidal cumulene complexes [M{C=C=C₆H₄=C=C(H)CPh₃}(LL)Cp’]⁺, which were isolated as the water adducts [M{C≡C-1,4-C₆H₄-C(=O)CH₂CPh₃}(LL)Cp’] ( 6 a–d ). Evincing the scope of the formation of such extended cumulenes from ethynyl-substituted arylvinylene precursors, the rather reactive half-sandwich (5-ethynyl-2-thienyl)vinylidene complexes [M{C=C(H)-2,5-^cC₄H₂S-C≡CH}(LL)Cp’]BF₄ ([ 7 a – d ]BF₄ add water readily to give [M{C≡C-2,5-^cC₄H₂S-C(=O)CH₃}(LL)Cp’] ( 8 a – d )].     

Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)3L(μ‐η1 : η2‐C≡CPh)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (L = CO,PnBu3)

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐ray Crystal Structures of [Ru₂(CO)₃L(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (L = CO, PⁿBu₃) [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 1 ) reacts with several phosphines (L) in refluxing toluene under substitution of one carbonyl ligand and yields the compounds [Ru₂(CO)₃L(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] (L = PⁿBu₃, 2 a ; L = PCy₂H, 2 b ; L = dppm‐P, 2 c ; dppm = Ph₂PCH₂PPh₂). The reactivity of 1 as well as the activated complexes 2 a – c towards phenylethyne was studied. Thus 1 , 2 a and 2 b , respectively, react with PhC≡CH in refluxing toluene with elimination of dihydrogen to the acetylide‐bridged complexes [Ru₂(CO)₄(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ) and [Ru₂(CO)₃L(μ‐η¹ : η²‐C≡CPh)(μ‐P^tBu₂)(μ‐dppm)] ( 4 a and 4 b ). The molecular structures of 3 and 4 a were determined by crystal structure analyses.     

RuII and RuIII Chloronitrile Complexes: Synthesis,Reaction Chemistry,Solid State Structure,and (Spectro)Electrochemical Behavior

The synthesis of [Ti₆O₄(OiPr)₈(O₂CPh)₈] ( 3 ) and [RuCl(N≡CR)₅][RuCl₄(N≡CR)₂] ( 4a , R = Me; 4b , R = Ph), [Ru(N≡CPh)₆][RuCl₄(N≡CPh)₂] ( 5 ) and [H₃O][RuCl₄(N≡CMe)₂] ( 7a ) is discussed. Crystallization of 5 from CH₂Cl₂ gave trans-[RuCl₂(N≡CPh)₄] ( 6 ). The solid-state structures of 3 , 4a , b , 5 , 6 and 7a are reported. Complex 4b forms a 3D network, while 6 displays a 2D structure, due to π-interactions between the benzonitrile ligands. The (spectro)electrochemical behavior of 4a , b and 6 was studied at 25 and –72 °C and the results thereof are compared with [NEt₄][RuCl₄(N≡CMe)₂] ( 7b ) and [RuCl(N≡CPh)₅][PF₆] ( 8 ). The electrochemical response of the cation and the anion in 4a , b are independent from each other. [RuCl(N≡CR)₅]⁺ possesses one reversible Ru^II/Ru^III process. However, [RuCl₄(N≡CMe)₂]^– was shown to be prone to ligand exchange and disproportionation upon formation of either a Ru^IV and Ru^II species at 25 °C, while at –72 °C the rapid conversion of the electrochemically formed species is hindered. In situ IR and UV/Vis/NIR studies confirmed the respective disproportionation reaction products of the aforementioned oxidation and reduction, respectively.     

Copolymerization of 1-(trimethylsilyl)-1-propyne with disubstituted hydrocarbon acetylenes

Copolymerization of 1-(trimethylsilyl)-1-propyne (MeC ≡ CSiMe₃) with several aromatic and aliphatic disubstituted acetylenes (MeC ≡ CPh, n-BuC ≡ CPh, 2-octyne, and 4-octyne) were examined by using Ta and Nb catalysts. The TaCl₅–Ph₃Bi catalyst was effective in copolymerization with the aromatic acetylenes, whereas the NbCl₅–Ph₃Bi catalyst was preferable in copolymerization with the aliphatic acetylenes. The copolymerization products were not mixtures of homopolymers but copolymers. The relative reactivity of monomer tended to decrease with increasing steric effect of monomer: 2-octyne > MeC ≡ CSiMe₃ > 4-octyne > MeC ≡ CPh > n-BuC ≡ CPh. The copolymers of MeC ≡ CSiMe₃ with MeC ≡ CPh [copoly(TMSP/PP)s] had high molecular weight (M _w > 1 × 10⁶), and provided thermally stable tough films. With increasing MeC ≡ CPh content of copoly(TMSP/PP), the oxygen permeability coefficient (P) decreased, while the separation factor (P/P) increased.     

Structural Studies of Some Compounds Containing C2 Fragments Attached to Various Metal‐Ligand End‐Groups

The preparation, characterisation and single‐crystal XRD molecular structure determinations of four complexes containing –CC–ML_n end‐groups, namely Ru{C≡CFc′(I)}(dppe)Cp ( 1 ), the vinylidene [Os(=C=CH₂)(PPh₃)₂Cp]PF₆ ( 2 ), trans‐Pt(C≡CC₆H₄‐4‐C≡CPh){C≡CC₆H₄‐4‐C₂Ph[Co₂(μ‐dppm)(CO)₄]}(PPh₃)₂ ( 3 ), and C₆H₄{μ₃‐C₂[AuRu₃(CO)₉(PPh₃)]}₂‐1,4 ( 4 ) are reported. In these compounds a range of –CC– environments is found, extending from the σ‐bonded alkynyl group in 1 to examples where the C₂ unit interacts with either a proton (in vinylidene 2 ), by bridging a dicobalt carbonyl moiety (in 3 ) or the AuRu₃ cluster in 4 . Changes in geometry are rationalised by considering the various bonding modes.     

Die Kristallstrukturen von [ReCl4(PhCCPh)]2 · 2 CH2Cl2 und von PPh4[ReOCl4]

Crystal Structures of [ReCl₄(PhC?CPh)]₂ · 2 CH₂Cl₂ and PPh₄[ReOCl₄] Single crystals of [ReCl₄(PhC?CPh)]₂ · 2 CH₂Cl₂ were obtained by chilling dilute solutions of the solvate [ReCl₄(PhC?CPh)POCl₃] in CH₂Cl₂. PPh₄[ReOCl₄] was formed by the reaction of the diphenyl acetylene complex [ReCl₅(PhC?CPh)] with PPh₄Cl · H₂O in CH₂Cl₂ solution. [ReCl₄(PhC?CPh)]₂ · 2 CH₂Cl₂: space group P2₁/c, Z = 2, 2244 observed independent reflexions, R = 0.038. Lattice parameters (19°C): a = 987.2 pm; b = 1533.9 pm; c = 1193.8 pm; β = 90.17° The compound forms centrosymmetrical dimeric molecules with ReCl₂Re bridges with Re? Cl distances of 241.2 and 267.6 pm. The longer Re? Cl bond is situated in trans-position to the equatorial, side-on coordinated diphenyl acetylene ligand with mean Re? C distances of 200 pm. PPh₄[ReOCl₄]: space group P4/n, Z = 2, 1487 observed, independent reflexions, R = 0.047. Lattice parameters (19°C): a = b = 1272.0 pm; c = 771.3 pm. The compound crystallizes in the AsPh₄[RuNCl₄] type; it consists of [ReOCl₄]^? anions and PPh₄⁺ cations. The anions are tetragonal with C_4v symmetry and bond lengths Re? O = 165.4 pm and Re? Cl = 232.6 pm; the bond angle OReCl is 106.7°.     

Synthesis of ylideplatinum(II) complexes via α-functionalised alkylplatinum(II) intermediates and some comparative data on palladium(II) complexes; X-ray structure of trans-[Pt(CH2PEt3)I(PEt3)2]I

The reaction of [Pt(PEt₃)₃] with CH₂I₂ affords trans-[Pt(CH₂PEt₃)I(PEt₃)₂]I and is believed to proceed via the α-functionalised alkyl cis-[Pt(CH₂I)I(PEt₃)₂], because similar ylides are obtained from cis- or trans-[PT(CH₂X)(PPh₃)₂X] (XCl, Br, or I) with PR₃ (PEt₃, PBu₃ⁿ, PMePh₂, PEtPh₂, or PPh₃); cis-[Pd(CH₂I)-I(PPh₃)₂] does not react with excess PPh₃, but with PEt₃ yields trans-[Pd(CH₂PEt₃)I(PPh₃)₂]I; the X-ray structure of trans-[Pt(CH₂PEt₃)I(PEt₃)₂]I (current R = 0.045) shows PtP(1) 2.332(7), PtP(2) 2.341(8), PtC 2.08(2), and PtI 2.666(2) Å, and angles (a) C(1)PtI, P(1), P(2): 176.9(8), 91.6(6), 93.4(6), (b) IPtP(1), P(2): 87.1(2), 88.5(2), and (c) P(1)P(2), 166.8(3), and (d) PtC(1)P(3), 118(1)°.     

1‐Azaallyl Complexes of NiII,PdII, and TiIII

The metal complexes [Ni{N(Ar)C(R)C(H)Ph}₂) ( 2 ) (Ar = 2,6‐Me₂C₆H₃, R = SiMe₃), [Ti(Cp₂){N(R)C(Bu^t)C(H)R}] ( 3 ), M{N(R)C(Bu^t)C(H)R}I [M = Ni ( 4 a ) or Pd ( 4 b )] and [M{N(R)C(Bu^t)C(H)R}I(PPh₃)] [M = Ni ( 5 a ) or Pd ( 5 b )] have been prepared from a suitable metal halide and lithium precursor of ( 2 ) or ( 3 ) or, alternatively from [M(LL)₂] (M = Ni, LL = cod; M = Pd, LL = dba) and the ketimine RN = C(Bu^t)CH(I)R ( 1 ). All compounds, except 4 were fully characterised, including the provision of X‐ray crystallographic data for complex 5 a .     

Reactions of dimethyl- and diphenyl-mercury with dihalobis(isocyanide)palladium(II) complexes

The reaction of cis-[PdCl₂(CNR)₂] (R = Ph, p-MeC₆H₄, p-MeOC₆H₄) and trans-[PdI₂(CNPh)₂] with HgR′₂ (R′ = Me, Ph) followed by addition of PPh₃ (Pd/PPh₃, $\text{1}\text{2}$) gives complexes of the type trans- [PdX {C(=NR)C(R′)=NR}(PPh₃)₂] (X = Cl, I) I as main products. These bis(imino) compounds may result from double insertion of the coordinated isocyanides into a PdR′ σ-bond. NaBPh₄ was also found to act like HgPh₂ as a good phenylating agent towards coordinated isocyanide. The reactions of I with methanolic HClO₄ yield cationic compounds: trans- [PdX{C(NHR)C(R′)=NR}(PPh₃)₂]ClO₄; the protonated bis(imino) group may also be formulated as {C(=NR)C(R′)NHR} and a fast equilibrium between the two forms probably exists in solution. The factors influencing the reaction with HgR′₂ and spectroscopic data (IR and ¹H NMR) for the complexes are reported and discussed.     

Amidophosphine‐stabilized palladium complexes catalyse Suzuki–Miyaura cross‐couplings in aqueous media

We report a simple and efficient procedure for Suzuki–Miyaura reactions in aqueous media catalysed by amidophosphine‐stabilized palladium complexes trans‐{L³PPh₂}₂PdCl₂ ( 3 ), trans‐{L³PPhtBu}₂PdCl₂ ( 4 ), [Pd(η³‐C₃H₅)(L³PPh₂)Cl] ( 5 ) and {Pd[2‐(Me₂NCH₂)C₆H₄](L³PPh₂)Cl} ( 6 ). The acidity of the NH proton in complexes 3 , 4 , 5 , 6 plays an important role in their catalytic activity. In addition, the palladium complexes cis‐{L¹PPh₂}PdCl₂ ( 1 ) and trans‐{L²PPh₂}₂PdCl₂ ( 2 ) stabilized by phosphines containing Y,C,Y‐chelating ligands L^1,2 have also been found to be useful catalysts for Suzuki–Miyaura reactions in aqueous media. The method can be effectively applied to both activated and deactivated aryl bromides yielding high or moderate conversions. The catalytic activity of couplings performed in pure water increases when utilizing a Pd complex with more acidic NH protons. A decrease of palladium concentration from 1.0 to 0.5 mol% does not lead to a substantial loss of conversion. In addition, Pd complex 1 can be efficiently recovered using two‐phase system extraction. Copyright © 2016 John Wiley & Sons, Ltd.     

Strukturen von neuen Bis(pentafluorophenyl)halogenomercuraten [{Hg(C6F5)2}3(μ‐X)]— (X = Cl,Br, I)

Structures of New Bis(pentafluorophenyl)halogeno Mercurates [{Hg(C₆F₅)₂}₃(μ‐X)]^— (X = Cl, Br, I) From the reactions of [PNP]Cl or [PPh₄]Y (Y = Br, I) with Hg(C₆F₅)₂ crystals of the composition [Cat][{Hg(C₆F₅)₂}₃X] (Cat = PNP, X = Cl ( 1 ); Cat = PPh₄, X = Br ( 2 ), I ( 3 )) are formed. 1 crystallizes in the triclinic space group P1¯, 2 and 3 crystallize isotypically in the monoclinic space group C2/c. In the crystals the halide anions are surrounded by three Hg(C₆F₅)₂ molecules. The reaction of [PPh₄]Br with Hg(C₆F₅)₂ under slightly changed conditions gives the compound [PPh₄]₂[{Hg(C₆F₅)₂}₃(μ‐Br)][{Hg(C₆F₅)₂}₂(μ‐Br)] ( 4 ).     

Der Dihydridoiridium(III)‐Komplex [IrH2Cl(PiPr3)2] als Molekülbaustein für unsymmetrische Rhodium–Iridiumund Iridium–Iridium‐Zweikernverbindungen

The Dihydridoiridium(III) Complex [IrH₂Cl(P i Pr₃)₂] as a Molecular Building Block for Unsymmetrical Binuclear Rhodium–Iridium and Iridium–Iridium Compounds The title compound [IrH₂Cl(PiPr₃)₂] ( 3 ) reacts with the chloro‐bridged dimers [RhCl(PiPr₃)₂]₂ ( 1 ) and [IrCl(C₈H₁₄)(PiPr₃)]₂ ( 5 ) by cleavage of the Cl‐bridges to give the unsymmetrical binuclear complexes 4 and 6 with Rh(μ‐Cl)₂Ir and Ir(μ‐Cl)₂Ir as the central building block. The reactions of 3 with the bis(cyclooctene) and (1,5‐cyclooctadiene) compounds [MCl(C₈H₁₄)₂]₂ ( 7 , 8 ) and [MCl(η⁴‐C₈H₁₂)]₂ ( 9 , 10 ) (M = Rh, Ir) occur analogously and afford the rhodium(I)‐iridium(III) and iridium(I)‐iridium(III) complexes 11 – 14 in 70–80% yield. Treatment of [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH₂(PiPr₃)₂] ( 13 , 14 ) with phenylacetylene leads to the formation of the substitution products [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH(C≡CPh)(PiPr₃)₂] ( 15 , 16 ) without changing the central molecular core. Similarly, the compound [(η⁴‐C₈H₁₂)Rh(μ‐Br)₂IrH(C≡CPh)(PiPr₃)₂] ( 18 ) has been prepared; it was characterized by X‐ray crystallography.     

Preparation and characterization of tris(iso‐propyl)stibine complexes of palladium and platinum

Tris(iso‐propyl)stibine complexes of palladium and platinum of the type [MX₂(SbⁱPr₃)₂] [M, X = Pd, Cl (1a), Pd, Br (1b), Pd, I (1c), Pt, Cl (2)] have been prepared and characterized by elemental analysis, IR and ¹H NMR spectral data. The structure of 1a, established by X‐ray structural analysis, revealed that the palladium atom is in a square planar environment with mutually trans SbⁱPr₃ ligands. Copyright © 2001 John Wiley & Sons, Ltd.     

Double Insertion of Coordinated Phosphanylalkyne Ligands into a Pt−C6F5 Bond

Enhanced reactivity is shown by uncoordinated C≡C bonds in the proximity of a metal in phosphanylacetylene complexes. cis-[Pt(C₆F₅)₂(thf)₂] reacts with [M(C₆F₅)₂(PPh₂C≡CPh)₂] (M=Pt, Pd) to form binuclear complexes containing the novel 2,3-bis(diphenylphosphanyl)-1,3-butadien-1-yl bridging ligand. Substitution of the solvent ligands with, for example, PPh₂H (see picture) provides species that could be characterized by X-ray crystallography.     

Luminescent Benzoquinolate‐Isocyanide Platinum(II) Complexes: Effect of Pt⋅⋅⋅Pt and π⋅⋅⋅π Interactions on their Photophysical Properties

The neutral compounds [Pt(bzq)(CN)(CNR)] (R=tBu ( 1 ), Xyl ( 2 ), 2‐Np ( 3 ); bzq= benzoquinolate, Xyl=2,6‐dimethylphenyl, 2‐Np=2‐napthyl) were isolated as the pure isomers with a trans‐C_bzq,CNR configuration, as confirmed by ¹³C{¹H} NMR spectroscopy in the isotopically marked [Pt(bzq)(¹³CN)(CNR)] (R=tBu ( 1′ ), Xyl ( 2′ ), 2‐Np ( 3′ )) derivatives (δ¹³C_CN≈110 ppm; ¹J(Pt,¹³C)≈1425 Hz]. By contrast, complex [Pt(bzq)(C≡CPh)(CNXyl)] ( 4 ) with a trans‐N_bzq,CNR configuration, has been selectively isolated from [Pt(bzq)Cl(CNXyl)] (trans‐N_bzq,CNR) using Sonogashira conditions. X‐ray diffraction studies reveal that while 1 adopts a columnar‐stacked chain structure with Pt–Pt distances of 3.371(1) Å and significant π???π interactions (3.262 Å), complex 2 forms dimers supported only by short Pt???Pt (3.370(1) Å) interactions. In complex 4 the packing is directed by weak bzq???Xyl and bzq???C≡E (C, N) interactions. In solid state at room temperature, compounds 1 and 2 both show a bright red emission (?=42.1 % 1 , 57.6 % 2 ). Luminescence properties in the solid state at 77 K and concentration‐dependent emission studies in CH₂Cl₂ at 298 K and at 77 K are also reported for 1 , 1·CHCl3 , 2 , 2' , 2·CHCl3 , 3 , 4 .