The reaction of N-aminophthalimide with isothiocyanates

N-Aminophthalimide ( I ) reacted in refluxing isopropyl alcohol with a number of isothiocyanates to give the related 1:1 addition products, N-(3-substitutedthioureido)phthalimides III. On the other hand, heating I directly with an excess of neat arylisothiocyanates produced the N-arylphthalimides IV. As shown for IIIa, the 1:1 addition products are conveniently deblocked by the Ing-Manske procedure to yield the 4-substituted thiosemicarbazide.     

The condensation of ethyl phenylpropiolale with 3-pyridylacetonitrile

The reaction of 3-pyridylacetonitrile with ethyl phenylpropiolate gave not only the expected 3-hydroxy-5-phenyl-2-(3-pyridyl)pent-2-en-4-ynenitrile (IX) but also a di-Michael addition product of one molecule of the pyridylacetonitrile and two molecules of the acetylenic ester, ethyl 4-earbethoxy-3,5-diphenyl-6-(3-pyridyl) anthranilate (IV). Moreover, 2-elhoxy-6-phenyl-3-(3-pyridyl)pyrid-4-one (XIV) was also isolated as the eyclization product obtained after the addition of a molecule of ethanol to compound IX. Ir and ninr spectra arc reported for all products.     

The effects of promoters of K and Zr on the mesoporous carbon supported cobalt catalysts for Fischer-Tropsch synthesis

The mesoporous carbon supported cobalt catalyst (15%Co/MC) was found to be more active and selective to C(5)(+) than the traditionally activated carbon supported one (15%Co/AC) for the Fischer-Tropsch synthesis (FTS). The addition of small amount of K(2)O and ZrO(2) significantly affected the FTS behavior of 15%Co/MC. The addition of 1% K inhibited the FTS activity dramatically, while the addition of 3% Zr increased the FTS activity significantly. The addition of K(2)O decreased the surface acidity while increased the surface basicity of 15%Co/MC, resulting in the increased heat of adsorption of CO and substantially decreased heat of adsorption of H(2) on Co. In contrast, the addition of ZrO(2) increased the surface acidity and heat of adsorption of H(2) on Co. The FTS activity was found to be related to the ratio of heats for the adsorption of CO and H(2) on the catalysts 15%Co/MC, 15%Co-1%K/MC and 15%Co-3%Zr/MC. The highest FTS activity was obtained on the catalyst with the heat ratio of 1.2.     

Comparison of quantification strategies for one-point standard addition calibration: The homoscedastic case

Two quantification strategies for one-point standard addition calibration have been compared mathematically. One strategy involved the extrapolation of measurement points to their intercept with the x-axis to determine the analyte content in the unknown sample, and the other strategy is based upon direct calculation of the analyte content in the unknown sample using the instrumental responses obtained during measurement. The cases of both conventional standard addition calibration (C-SAC) and sequential standard addition calibration (S-SAC) have been considered. The homoscedastic situation has been considered, where the absolute precision of the instrumental response is constant. It has been determined that the precision ratio of the two strategies is dependent on surprisingly simple parameters: such as the sample to standard mass ratio (for C-SAC) and the analyte content ratio (for S-SAC).     

The Effect of Organotin Compounds on the Permeability of Model Biological Membranes

The efflux of dimethylarsinic acid (DMA) from liposomes formed from egg phosphatidylcholine (EPC) is increased when tributyltin chloride (TBT) is added to the extraliposomal compartment; however the addition of monobutyltin trichloride (MBT) slows down the efflux. When the liposomes are prepared from EPC and organotin compounds, different mechanisms for DMA efflux seem to operate: TBT–EPC liposomes show a mixture of facilitated and passive diffusion; MBT–EPC liposomes show only passive diffusion. The facilitated diffusion of DMA⁻ seems to be stopped by the addition of TBT to the extraliposomal compartment. © 1997 by John Wiley & Sons, Ltd.     

The micro determination of copper(II) with a solid-state copper-selective electrode

The standard addition and standard subtraction methods are discussed briefly. Both methods are applied to the determination of copper(II) in very small sample volumes. A microcell (25 μl) and a copper-selective micro-electrode are described for this purpose; a nanoliter burette was constructed for the addition of very small increments. The results are compared with those obtained in a 10-ml cell.     

The asymmetric addition of phenylacetylene to aldehydes

Enantioselective formation of C-C bonds is an area of intense research.Among them, the asymmetric addition of alkynyl reagents to aldehydes is very useful for the synthesis of chiral secondary propargyl alcohols, which are very important building blocks for many chiral organic compounds, and the acetylene and hydroxyl founctional group of propargyl alcohol can be easily transfered into many other structures.1Recently, many significant chiral ligands have been disclosed.2 Here, we report our r…     

The reactions of imidazol-2-ylidenes with the hydrogen atom: a theoretical study and experimental confirmation with muonium

The possible radicals resulting from hydrogen atom addition to the imidazole rings of 1,3-bis(isopropyl)-4,5-dimethylimidazol-2-ylidene (1) and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (2) have been studied by means of density functional calculations (B3LYP). The calculations included solvent effects estimated via the polarized continuum model (PCM) and an empirical treatment of vibrational averaging of hyperfine constants. Addition of a hydrogen (or muonium) atom to the carbeneic carbon of 1,3-bis(isopropyl)-4,5-dimethylimidazol-2-ylidene was found to give a radical 60.46 kJ mol(-)(1) more stable than the radical resulting from addition to the double bond. Estimation of the activation barriers for reaction at the two sites shows that addition at the carbeneic carbon is favored. The site of addition was confirmed experimentally using muonium (Mu), which can be considered a light isotope of hydrogen. Muon spin rotation and muon level-crossing spectroscopy were used to determine muon, (13)C, and (14)N hyperfine coupling constants (hfc's) for the radical products of addition to the two carbenes. Good agreement between the experimental and calculated hfc's confirms that Mu (and hence H) adds exclusively to the carbeneic carbon. The radicals that are produced have nonplanar radical centers with most of the unpaired electron spin density localized on the alpha-carbon.     

The role of hydrogen bonds in Baeyer-Villiger reactions

Various Baeyer-Villiger (B-V) oxidation reactions were examined by density functional theory calculations. Proton movements in transition states (TSs) of the two key steps, the nucleophilic addition of a peroxyacid molecule to a ketone (TS1) and the migration-cleavage of O-O (TS3), were discussed. A new TS of a hydrogen-bond rearrangement in the Criegee intermediate (TS2) was found. The hydrogen-bond directionality requires a trimer of the peroxyacid molecules at the nucleophilic addition of a peroxyacid molecule to a ketone TS (TS1). At the migration-cleavage of O-O TS (TS3), also three peroxyacid molecules are needed. Elementary processes of the B-V reaction were determined by the use of the (acetone and (H-CO-OOH)n, n=3) system. The geometries of the nucleophilic addition of a peroxyacid molecule to a ketone TS (TS1) and the migration-cleavage of O-O TS (TS3) in the trimer (n=3) participating are nearly insensitive to the substituent on the peroxyacid. The directionality is satisfied in those geometries. The migration-cleavage of O-O TS (TS3) was found to be rate-determining in reactions, [Me2C=O+(H-CO-OOH)3], [Me2C=O+(F3C-CO-OOH)3], and [Me2C=O+(MCPBA)3]. In contrast, the nucleophilic addition of a peroxyacid molecule to a ketone (TS1) is rate-determining in the reaction, [Ph(Me)C=O+(H-CO-OOH)3].     

The effect of nucleating agent on radiation stability of polypropylene

The radiation stability of polypropylene (PP) with and without nucleating agent (NA) is compared in relation to radiation sterilization of medical devices. In both cases high-and-low-molecular weight PP, the addition of NA increased the transparency and peak crystallization temperature of the PP. On the other hand, in poly(propylene-co-6%ethylene) copolymer, the addition of NA did not improve the transparency but crystallization occurred at higher temperature. Thus, adding NA to PP and copolymer give the advantage of shorter moulding time in the production of medical devices. It is found that both PP and copolymer with NA are less stable during irradiation and during storage after irradiation than without NA, this being the case especially for the lower molecular weight PP. The higher transparency and peak crystallization temperature in the PP and CP with NA were found to be due to smaller spherulites. As the effect of irradiation on polymer, addition of NA induce reduction of radiation stability of polymer owing to the change in morphology.     

The reaction of porphyrins with organolithium reagents

Porphyrins react readily with organolithium reagents, preferentially in the meso positions. The overall reaction is a nucleophilic substitution and proceeds via initial reaction of the organic nucleophile with a meso carbon yielding an anionic species which is hydrolyzed to a porphodimethene (5,15-dihydroporphyrin), formally constituting an addition reaction to two Cm positions. Subsequent oxidation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) yields meso-substituted porphyrins. The reaction is highly versatile as it is accomplished in high, often quantitative yields with various alkyl or aryl lithium reagents. In addition, LiR can be used for reaction with a variety of metal complexes (best with NiII, but also with ZnII, CuII, and CoII) and most useful with free base porphyrins. Similarly beneficial this reaction can be used in sequence for the introduction of 1, 2, 3, or 4 (different) meso substituents giving for the first time an entry into any desired meso-substituted porphyrin. If meso-substituted porphyrins are used, reaction with LiR can be used for either the preparation of phlorins (already known reaction), porphodimethenes (5,15-dihydroporphyrins, including those with exocyclic double bonds, for example, 5(1),5(2)-didehydroporphyrins) or chlorins (2,3-dihydroporphyrins) depending on the substituent type in the reactant porphyrins. Thus, this reaction presents a generally applicable method for the facile and versatile functionalization of porphyrins.     

The role of multifunctional kinetics during early-stage silicon hydride pyrolysis: reactivity of Si2H2 isomers with SiH4 and Si2H6

Kinetic parameters for the dominant pathways during the addition of the four Si(2)H(2) isomers, i.e., trans-HSiSiH, SiSiH(2), Si(H)SiH, and Si(H(2))Si, to monosilane, SiH(4), and disilane, Si(2)H(6), have been calculated using G3//B3LYP, statistical thermodynamics, conventional and variational transition state theory, and internal rotation corrections. The direct addition products of the multifunctional Si(2)H(2) isomers were monofunctional substituted silylenes, hydrogen-bridged species, and silenes. During addition to monosilane and disilane, the SiSiH(2) isomer was found to be most reactive over the temperature range of 800 to 1200 K. Revised parameters for the Evans-Polanyi correlation and a representative pre-exponential factor for multifunctional silicon hydride addition and elimination reaction families under pyrolysis conditions were regressed from the reactions in this study. This revised kinetic correlation was found to capture the activation energies and rate coefficients better than the current literature methods.     

The thermolysis of dicarbonylcyclopentadienyliron dimer: The formation of biferrocene

The thermolysis of dicarbonylcyclopentadienyliron dimer in a sealed tube at 300°C has been reported to produce ferrocene, carbon monoxide, carbon dioxide, cyclopentadiene and elemental iron. We observe in addition to these products the production of biferrocene and elemental carbon. Thermolysis of carbonylcyclopentadienyliron tetramer (produced from the dimer by thermolysis in refluxing xylene) produces ferrocene, iron and carbon monoxidre; no biferrocene, carbon dioxide or elemental carbon are produced. A scheme is proposed to account for these products.     

The investigation of ancient pottery

Summary Ancient ceramic samples (single fragments and different parts of pots, unbroken and repaired; total about 180 samples) dated from the transitional period of late Bronze to early Iron Age (VIII-VI centuries BC) and early Iron Age (VII-IV centuries BC) were investigated by thermal analysis, X-ray powder diffraction, petrography, and scanning electron microscopy equipped with the energy-dispersive X-ray analyzer. In addition to that, to identify the clay sources for the ceramic manufacturing, about 15 samples of clays and soils found near archeological digs and taken from the mineralogical museum were investigated. We found out that the calcite content of ceramics is a very informative parameter for the identification of the clay source for the pottery manufactured at low technological level (low-temperature firing).     

The addition of amides to group 14 (di)-metallenes

The addition of a series of primary and secondary amides to the group 14 (di)metallenes Mes(2)Si=SiMes(2), Mes(2)Ge=GeMes(2) and (Me(3)Si)(2)Si=C(OSiMe(3))R, where R = t-Bu or R = 1-Ad, was examined. In general, the addition of primary and N-methyl amides gave amide adducts whereas the addition of N-phenyl amides gave imidate adducts. The regiochemistry of the additions was highly dependent upon the substituent bonded to the amide nitrogen. We propose that the formation of the adducts proceeds by way of a zwitterionic intermediate. The reactivity of tetramesityldigermene towards amides is used to predict the structure of the amide adducts formed on the Ge(100)-2 × 1 surface.     

The Reaction of Phenyl(trichloromethyl)mercury with Substituted Norbornenes

The addition of phenyl(trichloromethyl)mercury to five substituted norbornenes is described, and the results compared with those obtained with bicyclo[2.2.2]oct-2-ene and 3,3,5,5-tetramethylcyclopentene. The reaction proves to be useful for synthetic purposes, in that it leads usually to ring expansion. However, a possible disadvantage is that the addition step is sensitive to steric hindrance and depends on the reactivity of the double bond.     

N,N-dihalophosphoramides-XV: The addition of diethyl N,N-dichlorophosphoroamidate (DCPA) to conjugated 1,3-dienes

The addition of DCPA to several conjugated 1,3-dienes has been studied. The reaction was found to proceed in dichloromethane and was spontaneously or photolytically initiated depending on the structure of the dienes. N-chloro adducts, formed upon addition, could be reduced “in situ” with sodium sulphite solution to give the corresponding diethyl N-(chloroalkenyl)posphoroamidates. Addition of DCPA to terminal double bond 1,3-dienes (butadiene, isoprene and 2,3-dimethyl-1,3-butadiene) leads regiospecifically to (E)-1,4-adducts. Similarly, 1,4-addition is also observed for 1,3-cyclohexadiene. Reaction of DCPA with nonterminal double bond 1,3-dienes (trans-piperylene, 4-methyl-1,3-pentadiene, 2,5-dimethyl-2,4-hexadiene and 1,4-diphenyl-1,3-butadiene) usually affords a mixture of adducts. Spectral data and chemical transformations pertinent to the proof of structure of DCPA addition products are presented. A possible mechanism for the addition is discussed.     

The influence of cross-linking agents on ring-opening metathesis polymerized thermosets

The addition of suitable cross-linking agents with norbornene-based monomers has significant effects on the thermal properties of the resulting polymers formed by olefin metathesis. Ethylidene norbornene (ENB) and endo-dicyclopentadiene (endo-DCPD) were mixed separately with various loadings of three different cross-linking agents and then polymerized with the addition of Grubbs’ catalyst. The polymerization kinetics and resulting glass transition temperature (T _g) of the systems were evaluated by differential scanning calorimetry (DSC). The addition of the first cross-linking agent, norbornadiene (CL-1), to both endo-DCPD and ENB resulted in decreasing glass transition temperatures with increasing concentrations. In contrast, the addition of the other two cross-linking agents (CL-2 and CL-3), which were both custom synthesized bifunctional norbornyl systems, to both endo-DCPD and ENB resulted in a monotonic increases in T _g with cross-linker concentration. By tailoring the loading of these custom cross-linking agents, the properties of these polymer systems can be controlled for various applications, including self-healing composites.     

The regioselectivity of addition of organolithium reagents to enones and enals: the role of HMPA.

The role of polar solvents (particularly HMPA) in controlling the ratio of 1,2 to 1,4 addition of sulfur-substituted organolithium reagents to cyclohexenones and hexenal was studied. Low-temperature, multinuclear NMR studies provided quantitative information about the ratio of contact (CIP) and solvent-separated (SIP) ion pairs in solutions of dithianyllithiums and phenylthiobenzyllithiums in THF-HMPA solutions. The ratio of contact and separated ion pairs was manipulated by changes in the strength of solvation (generally through the addition of HMPA). Although the results are consistent with the CIP/SIP distribution being an important factor in determining the regioselectivity of these additions (Curtin-Hammett limitations prevent a direct correlation), it cannot be the only one. Changes in diastereomeric product ratios upon addition of HMPA suggest that complexation of HMPA to lithium has two effects. First, it causes ion pair separation, which enhances 1,4 addition. Second, it lowers the Lewis acidity and catalytic effectiveness of the lithium cation, which also favors 1,4 addition. For most sulfur-stabilized lithium reagents, 2 equiv of HMPA suffice to achieve >95% 1,4 addition, whereas 4 equiv of DMPU are required to achieve identical regiochemical and stereochemical results.     

The effect of sulphur dioxide on the mannich reactions of phenols

Regioselectivity in the $\text{ortho}$-dialkylaminomethylation of phenols is greatest, for example in reactions of 2,5-dimethylphenol, when a mixture of the phenol and sulphur dioxide is allowed to stand for several hours before the addition of a bis-(dialkylamino)methane (aminal) or an alkoxydialkylaminomethane (aminol ether).