New Anthracene Derivatives as Triplet Acceptors for Efficient Green‐to‐Blue Low‐Power Upconversion

Three new anthracene derivatives [2‐chloro‐9,10‐dip‐tolylanthracene (DTACl), 9,10‐dip‐tolylanthracene‐2‐carbonitrile (DTACN), and 9,10‐di(naphthalen‐1‐yl)anthracene‐2‐carbonitrile (DNACN)] were synthesized as triplet acceptors for low‐power upconversion. Their linear absorption, single‐photon‐excited fluorescence, and upconversion fluorescence properties were studied. The acceptors exhibit high fluorescence yields in DMF. Selective excitation of the sensitizer Pd^IIoctaethylporphyrin (PdOEP) in solution containing DTACl, DTACN, or DNA‐CN at 532 nm with an ultralow excitation power density of 0.5 W cm^?2 results in anti‐Stokes blue emission. The maximum upconversion quantum yield (Φ_UC=17.4 %) was obtained for the couple PdOEP/DTACl. In addition, the efficiency of the triplet–triplet energy transfer process was quantitatively studied by quenching experiments. Experimental results revealed that a highly effective acceptor for upconversion should combine high fluorescence quantum yields with efficient quenching of the sensitizer triplet.     

Theoretical studies on triaryamine‐based p‐type D‐D‐π‐A sensitizer

Development of triaryamine‐based nonmetallic dye sensitizers is a hot topic in the solar cell research. A series of triaryamine‐based dyes WS1 – WS7 were designed with W1 as the prototype. Density functional theory (DFT) and time‐dependent‐DFT calculations were used to investigate the effects of the attached donor D on the absorption spectra and electronic properties of the dyes. The light‐harvesting efficiency (LHE), hole injection force (ΔG_inj), dye regeneration force (ΔG_reg), and charge recombination force (ΔG_CR) for all the dyes were predicted. The insertion of D not only results in a red shift in the absorption spectra for all dyes but also achieves a broader absorption for visible light. Compared with that of the prototype, the absorption peak of the dye WS7 has a red shift of 95 nm and an oscillator strength increase of 29%. The absorption peak of WS7 is wider and stronger, and the absorption range extends to 900 nm. The LHE and ΔG_reg values of WS7 are 0.991 and ?1.49 eV, respectively. On overall evaluation, WS7 is a promising candidate of a p‐type dye sensitizer with good light absorption and dye regeneration efficiency.     

Oligo(p‐phenyleneethynylene) (OPE) Molecular Wires: Synthesis and Length Dependence of Photoinduced Charge Transfer in OPEs with Triarylamine and Diaryloxadiazole End Groups

The systematic synthesis and photophysical, electrochemical and computational studies on an extended series of triphenylamine‐[C?C‐1,4‐C₆H₂(OR)₂]_n‐C?C‐diphenyl‐1,3,4‐oxadiazole dyad molecules (the OR groups are at 2,5‐positions of the para‐phenylene ring and R=C₆H₁₃; n=0–5, compounds 1 , 2 , 3 , 4 and 5 , respectively) are reported. Related molecules with identical end groups, triphenylamine‐C?C‐1,4‐C₆H₂(OR)₂‐C?C‐triphenylamine (R=C₆H₁₃; 6 ) and diphenyl‐1,3,4‐oxadiazole‐[C?C‐C₆H₂(OR)₂]₂‐C?C‐diphenyl‐1,3,4‐oxadiazole (R=C₆H₁₃; 7 ) were also studied. These D–B–A 1 – 5 , D–B–D 6 and A–B–A 7 (D=electron donor, B=bridge, A=electron acceptor) systems were synthesized using palladium‐catalysed cross‐coupling reactions of new p‐phenyleneethynylene building blocks. Steady‐state emission studies on the dyads 1 – 5 reveal a complicated behavior of the emission that is strongly medium dependent. In low polarity solvents the emission is characterized by a sharp high‐energy peak attributed to fluorescence from a locally excited (LE) state. In more polar environments the LE state is effectively quenched by transfer into an intramolecular charge‐transfer (ICT) state. The medium dependence is also observed in the quantum yields (QYs) which are high in cyclohexane and low in acetonitrile, thus also indicating charge‐transfer character. Low‐temperature emission spectra for 2 – 5 in dichloromethane and diethyl ether also reveal two distinct excited states, namely the LE state and the conventional ICT state, depending on solvent and temperature. Hybrid DFT calculations for 1 – 7 establish that the OPE bridge is involved in both frontier orbitals where the bridge character increases as the bridge length increases. Computed TD‐DFT data on 1 – 5 assign the emission maxima in cyclohexane as LE transitions. Each time‐resolved emission measurement on 2 – 7 in cyclohexane and diethyl ether reveals a wavelength dependent bi‐exponential decay of the emission with a fast component in the 5–61 ps range on blue detection and a slower approximately 1 ns phase, independent of detection wavelength. The fast component is attributed to LE fluorescence and this emission component is rate limited and quenched by transfer into an ICT state. The fast LE fluorescence component varies systematically with conjugation length for the series of D–B–A dyads 2 – 5 . An attenuation factor β of 0.15 Å^?1 was determined in accordance with an ICT superexchange mechanism.     

Photocatalytic Hydrogen Evolution with a Self‐Assembling Reductant–Sensitizer–Catalyst System

A noble‐metal‐free system for photochemical hydrogen production is described, based on ascorbic acid as sacrificial donor, aluminium pyridyl porphyrin as photosensitizer, and cobaloxime as catalyst. Although the aluminium porphyrin platform has docking sites for both the sacrificial donor and the catalyst, the resulting associated species are essentially inactive because of fast unimolecular reversible electron‐transfer quenching. Rather, the photochemically active species is the fraction of sensitizer present, in the aqueous/organic solvent used for hydrogen evolution, as free species. As shown by nanosecond laser flash photolysis experiments, its long‐lived triplet state reacts bimolecularly with the ascorbate donor, and the reduced sensitizer thus formed, subsequently reacts with the cobaloxime catalyst, thereby triggering the hydrogen evolution process. The performance is good, particularly in terms of turnover frequencies (TOF=10.8 or 3.6 min^?1, relative to the sensitizer or the catalyst, respectively) and the quantum yield (Φ=4.6 %, that is, 9.2 % of maximum possible value). At high sacrificial donor concentration, the maximum turnover number (TON=352 or 117, relative to the sensitizer or the catalyst, respectively) is eventually limited by hydrogenation of both sensitizer (chlorin formation) and catalyst.     

A thioxanthone‐based visible photoinitiator

Thioxanthone‐based 9‐(2‐Morpholine‐4yl‐acetyl)‐5‐thia‐napthasen‐12‐one (TX‐MPM) was synthesized and characterized as a one‐component novel visible photoinitiator. Its capability to act as an initiator for the polymerization of methyl methacrylate (MMA) was examined in photoreactor and also daylight. Photophysical properties: fluorescence and phosphorescence emission spectra and fluorescence quantum yield of TX‐MPM (?_f = 0.29) were determined. The phosphorescence lifetime was found 131 ms for TX‐MPM and 110 ms for initiator‐attached polymer (PMMA) at 77 K, indicated a π→π* nature of the lowest triplet state. A model compound, morpholino acetonapthone was used as quencher for the triplet states of TX‐MPM and the quenching rate constant was determined (k_q = 1.26 × 10⁹ M^?1s^?1). According to laser flash photolysis studies, intermolecular hydrogen abstraction process was more dominant path to the formation of the initiating radicals. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Interaction of water‐soluble tetrakis‐(1‐methyl‐4‐pyridiniyl)‐porphyrin and CdS naonoparticles

The interaction between positively charged porphyrin TMPyP(4) (tetrakis‐(1‐methyl‐4‐pyridiniyl) porphyrin) and negatively charged surface of colloidal CdS nanoparticles has been studied by absorption spectrum, fluorescence spectroscopy, and time‐correlated single‐photon‐counting methods. Addition of CdS colloid to a TMPyP(4) solution leads to TMPyP(4) adsorption onto the surface of CdS colloid with an apparent association constant of 4643 L/mol. This adsorption results in distinct changes in absorption spectrum of TMPyP (4) and the quenching of its′ fluorescence, but the biexponential fluorescence decay changes hardly. Nearly 90% of the fluorescence of 5 × 10^?6 mol/L TMPyP(4) can be quenched with 1.5 × 10^?4 mol/L CdS colloid. These spectral changes are attributed to the formation of a certain form complex TMPyP(4)‐CdS.     

Triplet–Triplet Energy Transfer from a UV‐A Absorber Butylmethoxydibenzoylmethane to UV‐B Absorbers

The phosphorescence decay of a UV‐A absorber, 4‐tert‐butyl‐4′‐methoxydibenzolymethane (BMDBM) has been observed following a 355 nm laser excitation in the absence and presence of UV‐B absorbers, 2‐ethylhexyl 4‐methoxycinnamate (octyl methoxycinnamate, OMC) and octocrylene (OCR) in ethanol at 77 K. The lifetime of the lowest excited triplet (T₁) state of BMDBM is significantly reduced in the presence of OMC and OCR. The observed quenching of BMDBM triplet by OMC and OCR suggests that the intermolecular triplet–triplet energy transfer occurs from BMDBM to OMC and OCR. The T₁ state of OCR is nonphosphorescent or very weakly phosphorescent. However, we have shown that the energy level of the T₁ state of OCR is lower than that of the enol form of BMDBM. Our methodology of energy‐donor phosphorescence decay measurements can be applied to the study of the triplet–triplet energy transfer between UV absorbers even if the energy acceptor is nonphosphorescent. In addition, the delayed fluorescence of BMDBM due to triplet–triplet annihilation was observed in the BMDBM–OMC and BMDBM–OCR mixtures in ethanol at 77 K. Delayed fluorescence is one of the deactivation processes of the excited states of BMDBM under our experimental conditions.     

Rational Design of Emissive NIR‐Absorbing Chromophores: RhIII Porphyrin‐Aza‐BODIPY Conjugates with Orthogonal Metal–Carbon Bonds

The facile synthesis of Group 9 Rh^III porphyrin‐aza‐BODIPY conjugates that are linked through an orthogonal Rh?C(aryl) bond is reported. The conjugates combine the advantages of the near‐IR (NIR) absorption and intense fluorescence of aza‐BODIPY dyes with the long‐lived triplet states of transition metal rhodium porphyrins. Only one emission peak centered at about 720 nm is observed, irrespective of the excitation wavelength, demonstrating that the conjugates act as unique molecules rather than as dyads. The generation of a locally excited (LE) state with intramolecular charge‐transfer (ICT) character has been demonstrated by solvatochromic effects in the photophysical properties, singlet oxygen quantum yields in polar solvents, and by the results of density functional theory (DFT) calculations. In nonpolar solvents, the Rh^III conjugates exhibit strong aza‐BODIPY‐centered fluorescence at around 720 nm (Φ_F=17–34 %), and negligible singlet oxygen generation. In polar solvents, enhancements of the singlet‐oxygen quantum yield (Φ_Δ=19–27 %, λ_ex=690 nm) have been observed. Nanosecond pulsed time‐resolved absorption spectroscopy confirms that relatively long‐lived triplet excited states are formed. The synthetic methodology outlined herein provides a useful strategy for the assembly of functional materials that are highly desirable for a wide range of applications in material science and biomedical fields.     

A Promising Candidate with D‐A‐A‐A Architecture as an Efficient Sensitizer for Dye‐Sensitized Solar Cells

A series of metal‐free organic dyes with electron‐rich (D) and electron‐deficient units (A) as π linkers have been studied theoretically by means of density functional theory (DFT) and time‐dependent DFT calculations to explore the effects of π spacers on the optical and electronic properties of triphenylamine dyes. The results show that Dye 1 with a structure of D‐A‐A‐A is superior to the typical C218 dye in various key aspects, including the maximum absorption (λ_max=511 nm), the charge‐transfer characteristics (D/Δq/t is 5.49 Å/0.818 e^?/4.41 Å), the driving force for charge‐carrier injection (ΔG_inject=1.35 eV)/dye regeneration (ΔG_regen=0.27 eV), and the lifetime of the first excited state (τ=3.1 ns). It is thus proposed to be a promising candidate in dye‐sensitized solar cell applications.     

Ultrafast FRET to Study Spontaneous Micelle‐to‐Vesicle Transitions in an Aqueous Mixed Surface‐Active Ionic‐Liquid System

The spontaneous micelle‐to‐vesicle transition in an aqueous mixture of two surface‐active ionic liquids (SAILs), namely, 1‐butyl‐3‐methylimidazolium n‐octylsulfate ([C₄mim][C₈SO₄]) and 1‐dodecyl‐3‐methylimidazoium chloride ([C₁₂mim]Cl) is described. In addition to detailed structural characterization obtained by using dynamic light scattering, transmission electron microscopy (TEM), and cryogenic TEM techniques, ultrafast fluorescence resonance energy transfer (FRET) from coumarin 153 (C153) as a donor (D) to rhodamine 6G (R6G) as an acceptor (A) is also used to study micelle–vesicle transitions in the present system. Structural transitions of SAIL micelles ([C₄mim][C₈SO₄] or [C₁₂mim]Cl micelles) to mixed SAIL vesicles resulted in significantly increased D –A distances, and therefore, increased timescale of FRET. In [C₄mim][C₈SO₄] micelles, FRET between C153 and R6G occurs on an ultrafast timescale of 3.3 ps, which corresponds to a D –A distance of about 15 Å. As [C₄mim][C₈SO₄] micelles are transformed into mixed micelles upon the addition of a 0.25 molar fraction of [C₁₂mim]Cl, the timescale of FRET increases to 300 ps, which suggests an increase in the D –A distance to 31 Å. At a 0.5 molar fraction of [C₁₂mim]Cl, unilamellar vesicles are formed in which FRET occurs on multiple timescales of about 250 and 2100 ps, which correspond to D –A distances of 33 and 47 Å. Although in micelles and mixed micelles the obtained D –A distances are well correlated with their radius, in vesicles the obtained D –A distance is within the range of the bilayer thickness.     

Highly Sensitive and Selective Fluorescence Probe for 2,4‐Dinitrophenylhydrazine Detection in Wastewater Using Water‐Soluble CdTe QDs

A simple, cheap, sensitive and selective probe for determination of DNPH in wastewater using thioglycolic acid (TGA)‐coated CdTe QDs (TGA‐QDs) as fluorescence probe has been established, and the properties of CdTe QDs were characterized by TEM, FT‐IR, DLS, XRD and zeta potentials. CdTe QDs fluorescence is highly efficiently quenched after adding DNPH on account of electron transfer effect, and the fluorescence quenching behavior of CdTe QDs interaction with DNPH is static quenching process. A good linear relationship is observed between the relative fluorescence intensity (F₀/F) and 0.06–10 ng mL^?1 of DNPH. As compared with some of reported methods, LOD of this method for analysis of DNPH (0.23 ng mL^?1) is the lowest. Masking agents of DDTC and NH₄OH can eliminate the interference of Cu²⁺, Ag⁺ and Hg²⁺. Hence, DNPH can be selectively and accurately detected and the established method was successfully used for detecting DNPH in wastewater with acceptable recovery of 90.6–102%.     

Isotopic splitting patterns in the 13C NMR spectra of some partially deuterated 1‐aryl‐2‐(phenyldiazenyl)butane‐1,3‐dione and 4‐hydroxy‐3‐(phenyldiazenyl)‐2H‐chromen‐2‐one: evidence for elucidation of tautomeric forms

Nuclear magnetic resonance spectra of synthesized azo dyes derived from aniline derivatives in reaction with benzoylacetone and 4‐hydroxycoumarin were studied in both CDCl₃ and (CD₃)₂SO (two drops of D₂O were added into solutions of dyes). All dyes showed intramolecular hydrogen bonding. Dyes derived from o‐nitro aniline in the reaction with benzoylacetone, and 4‐hydroxycoumarin showed bifurcated intramolecular hydrogen bonds. The solvent‐substrate proton exchange of dyes derived from benzoylacetone and 4‐hydroxycoumarin was examined in the presence of two drops of D₂O. Among ten dye samples, two dyes derived from benzoylacetone did not show deuteration, three dyes showed partial deuteration and five dyes showed full deuteration under similar conditions. For the partially deuterated dyes the β‐isotope effect in ¹³C splitting was investigated and was used for the determination of the predominant tautomeric form. Copyright © 2016 John Wiley & Sons, Ltd.     

Energy Dissipation Processes of singlet‐excited 1‐Hydroxyfluorenone and its Hydrogen‐bonded Complex with N‐methylimidazole¶

Effects of solvent, pH and hydrogen bonding with N‐methylimidazole (MIm) on the photophysical properties of 1‐hydroxyfluorenone (1HOF) have been studied. Fluorescence lifetime, fluorescence quantum yield and triplet yield measurements demonstrated that intersystem crossing was the dominant process in apolar media and its rate constant significantly diminished with increasing solvent polarity. The acceleration of internal conversion in alcohols paralleled the strength of intermolecular hydrogen bonding. The faster energy dissipation from the singlet‐excited state in cyclohexane was attributed to intramolecular hydrogen bonding. The pK_a of 1HOF decreased from 10.06 to 5.0 on light absorption, and H₃O⁺ quenched the singletexcited molecules in a practically diffusion‐controlled reaction. On addition of MIm in toluene, dual fluorescence was observed, which was attributed to reversible formation of excited hydrogen‐bonded ion pair. Rate constants for the various deactivation pathways were derived from the combined analysis of the steady‐state and the time‐resolved fluorescence results.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

Investigation of the Interaction between N,N′‐Di(4‐Chlorophenyl)Thiourea and Human Serum Albumin by Fluorescence Spectroscopy: Synchronous Fluorescence Determination of Human Serum Albumin

Under physiological conditions, interaction between N,N′‐di(4‐chlorophenyl)thiourea synthesized and human serum albumin was investigated by using fluorescence spectroscopy and UV absorption spectrum. The intrinsic fluorescence of human serum albumin was quenched by N,N′‐di(4‐chlorophenyl)‐thiourea through a static quenching procedure. The binding constants (K) at 14 °C and 24 °C were obtained, and the values were 2.541 × 10⁵ M^?1 and 2.021 × 10⁵ M^?1, respectively. Thermodynamic parameter enthalpy change (ΔH) and entropy change (ΔS) were calculated to be ‐16.19 KJ/mol and 47.05 J·mol¹·K^?1, respectively, which indicated that hydrophobic force played a major role in interaction. The binding distance was evaluated on the basis of the theory of Föster energy transfer. The effects of various metal ions on the binding constants of N,N′‐di(4‐chlorophenyl)thiourea with human serum albumin were studied. A synchronous fluorescence technique for determination of human serum albumin was developed, and the method was successfully applied to the detection of HSA in human serum samples.     

One‐dimensional Salen‐type Chain‐like Lanthanide(III) Coordination Polymers: Syntheses,Crystal Structures,and Fluorescence Properties

Four salen‐type lanthanide(III) coordination polymers [LnH₂L(NO₃)₃(MeOH)_x]_n [Ln = La ( 1 ), Ce ( 2 ), Sm ( 3 ), Gd ( 4 )] were prepared by reaction of Ln(NO₃)₃ · 6H₂O with H₂L [H₂L = N,N′‐bis(salicylidene)‐1,2‐cyclohexanediamine]. Single‐crystal X‐ray diffraction analysis revealed that H₂L effectively functions as a bridging ligand forming a series of 1D chain‐like polymers. The solid‐state fluorescence spectra of polymers 1 and 2 emit single ligand‐centered green fluorescence, whereas 3 exhibits typical red fluorescence of Sm^III ions. The lowest triplet level of ligand H₂L was calculated on the basis of the phosphorescence spectrum of Gd^III complex 4 . The energy transfer mechanisms in the lanthanide polymers were described and discussed.     

The cyanine dye/trichloromethyl‐1,3,5‐triazine/thiols in two‐ and three‐component photoinitiating systems for free radical polymerization

The new photoinitiating systems for free radical polymerization of multifunctional monomers composed of carbocyanine dye, 1,3,5‐triazine derivative and heteroaromatic mercaptan were described. It was shown, that the polymerization abilities of such photoinitiatng systems are comparable with those observed for well‐known cyanine borate two‐component photoinitiating systems. The fluorescence quenching rate constants of tested sensitizer was about 2 × 10¹⁰ M^?1s^?1. Basing on the results of laser flash photolysis, the mechanism of the photochemical reactions occuring in the three‐component photoinitiating system was proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4243–4251, 2010     

Conjugated Polyelectrolyte‐Induced Self‐Assembly of Alkynylplatinum(II) 2,6‐Bis(benzimidazol‐2′‐yl)pyridine Complexes

Water‐soluble cationic alkynylplatinum(II) 2,6‐bis(benzimidazol‐2′‐yl)pyridine (bzimpy) complexes have been demonstrated to undergo supramolecular assembly with anionic polyelectrolytes in aqueous buffer solution. Metal–metal‐to‐ligand charge transfer (MMLCT) absorptions and triplet MMLCT (³MMLCT) emissions have been found in UV/Vis absorption and emission spectra of the electrostatic assembly of the complexes with non‐conjugated polyelectrolytes, driven by Pt???Pt and π–π interactions among the complex molecules. Interestingly, the two‐component ensemble formed by [Pt(bzimpy‐Et){C?CC₆H₄(CH₂NMe₃‐4)}]Cl₂ ( 1 ) with para‐linked conjugated polyelectrolyte (CPE), PPE‐SO₃^?, shows significantly different photophysical properties from that of the ensemble formed by 1 with meta‐linked CPE, mPPE‐Ala. The helical conformation of mPPE‐Ala allows the formation of strong mPPE‐Ala– 1 aggregates with Pt???Pt, electrostatic, and π–π interactions, as revealed by the large Stern–Volmer constant at low concentrations of 1 . Together with the reasonably large Förster radius, large HOMO–LUMO gap and high triplet state energy of mPPE‐Ala to minimize both photo‐induced charge transfer (PCT) and Dexter triplet energy back‐transfer (TEBT) quenching of the emission of 1 , efficient Förster resonance energy transfer (FRET) from mPPE‐Ala to aggregated 1 molecules and strong ³MMLCT emission have been found, while the less strong PPE‐SO₃^?– 1 aggregates and probably more efficient PCT and Dexter TEBT quenching would account for the lack of ³MMLCT emission in the PPE‐SO₃^?– 1 ensemble.     

Pd–Porphyrin Oligomers Sensitized for Green‐to‐Blue Photon Upconversion: The More the Better?

A series of directly meso‐meso‐linked Pd–porphyrin oligomers (PdDTP‐M, PdDTP‐D, and PdDTP‐T) have been prepared. The absorption region and the light‐harvesting ability of the Pd–porphyrin oligomers are broadened and enhanced by increasing the number of Pd–porphyrin units. Triplet–triplet annihilation upconversion (TTA‐UC) systems were constructed by utilizing the Pd–porphyrin oligomers as the sensitizer and 9,10‐diphenylanthracene (DPA) as the acceptor in deaerated toluene and green‐to‐blue photon upconversion was observed upon excitation with a 532 nm laser. The triplet–triplet annihilation upconversion quantum efficiencies were found to be 6.2 %, 10.5 %, and 1.6 % for the [PdDTP‐M]/DPA, [PdDTP‐D]/DPA, and [PdDTP‐T]/DPA systems, respectively, under an excitation power density of 500 mW cm^?2. The photophysical processes of the TTA‐UC systems have been investigated in detail. The higher triplet–triplet annihilation upconversion quantum efficiency observed in the [PdDTP‐D]/DPA system can be rationalized by the enhanced light‐harvesting ability of PdDTP‐D at 532 nm. Under the same experimental conditions, the [PdDTP‐D]/DPA system produces more ³DPA* than the other two TTA‐UC systems, benefiting the triplet–triplet annihilation process. This work provides a useful way to develop efficient TTA‐UC systems with broad spectral response by using Pd–porphyrin oligomers as sensitizers.