Synthesis of Optically Active α-Amino- phosphinic Acids by Catalytic Asymmetric Hydrogenation in Organic Solvents and Aqueous Micellar Media

Enantiomeric excesses of up to 99 % could be obtained in the synthesis of the biologically interesting acylated α-aminophosphinic acids 1 (R¹=Me, Ph; R²=H, Me, Et; R³=H, F, iPr) by asymmetric hydrogenation with rhodium complex catalysts and subsequent hydrolysis [Eq. (1)]. cod=1,5-cyclooctadiene.     

Substantially enhancing the catalytic performance of bis(imino)pyridylcobaltous chloride pre‐catalysts adorned with benzhydryl and nitro groups for ethylene polymerization

Variations in the ligand structure of homogeneous late transition metal catalysts through judicious choice and location of substituent is the foremost strategy in improving their catalytic performance for ethylene polymerization. In this contribution, symmetrical and unsymmetrical bis(imino)pyridylcobaltous chloride complexes adorned with nitro and benzhydryl groups {2‐[1‐(2,6‐dibenzhydryl‐4‐nitrophenylimino)ethyl]‐6‐[1‐(alkylphenylimino)ethyl]pyridylcobaltous chloride (alkyl: R¹ = Me and R² = H, Co1 ; R¹ = Et and R² = H, Co2 ; R¹ = ⁱPr and R² = H, Co3 ; R¹ and R² = Me, Co4 ; R¹ = Et and R² = Me, Co5 ; R¹ = benzhydryl and R² = NO₂, Co6 )} have been prepared and applied as catalysts for ethylene polymerization. The molecular structure of Co1 and Co2 revealed the unequal steric protection of the cobalt center induced by bis(imino)pyridine chelate. In the presence of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO) activators at different ethylene feeding rates (1 and 10 atm), catalysts Co1 – Co5 displayed high activities at 10 atm ethylene and produced strictly linear polyethylene (PE) with high molecular weight, Co2 /MMAO being the most highly active catalytic system showing the highest activity of 9.41 × 10⁶ g of PE (mol of Co)^?1 h^?1 which is three times higher than that of prototypal cobalt catalyst ( Co0 ) under identical conditions. Moreover, high melt temperature and unimodal molecular weight distribution are the characteristics of the resulting polyethylene.     

Novel Asymmetric Formylation of Aromatic Compounds: Enantioselective Synthesis of Formyl 7,8‐Dipropyltetrathia[7]helicenes

Asymmetric formylation of aromatic compounds is virtually unexplored. We report the synthesis and evaluation of a library including 20 new chiral formamides in the kinetic resolution of 7,8‐dipropyltetrathia[7]helicene, affording the corresponding formyl‐ or diformylhelicenes in up to 73 % ee, making enantiopure compounds available by recrystallisation. With the N,N‐disubstituted formamides used in this study, the best enantioselectivity has been achieved with R¹=iPr, R²=Me, R³=H, R⁴=1‐naphthyl or its 1‐pyrenyl equivalent.     

Novel Asymmetric and Stereospecific Aziridination of Alkenes with a Chiral Nitridomanganese Complex

The addition of pyridine N -oxide is necessary to obtain high enantioselectivities in the asymmetric aziridination of styrene derivatives through transfer of a nitrogen atom from chiral, toluenesulfonic anhydride activated nitridomanganese complex 1 [Eq. (a)]. Remarkably, high stereospecificity was observed in all the aziridinations of trans- and cis-1,2-disubstituted alkenes. R¹=H, Me, nPr, iPr; R²=H, Me; Ts=p-toluenesulfonyl.     

Four-coordinate trispyrazolylboratomanganese and -iron complexes with a pyrazolato co-ligand: syntheses and properties as oxidation catalysts

A series of complexes of the type [(Tp^R1,R2)M(X)] (Tp=trispyrazolylborato) with R¹/R² combinations Me/tBu, Ph/Me, iPr/iPr, Me/Me and for M=Mn or Fe coordinating [Pz^Me,tBu]^? (Pz=pyrazolato) or Cl^? as co‐ligand X has been synthesised. Although the chloride complexes were very unreactive and stable in air, the pyrazolato series was far more reactive in contact with oxidants like O₂ and tBuOOH. The [(Tp^R1,R2)M(Pz^Me,tBu)] complexes proved to be active pre‐catalysts for the oxidation of cyclohexene with tBuOOH, reaching turnover frequencies (TOFs) ranging between moderate and good in comparison to other manganese catalysts. Cyclohexene‐3‐one and cyclohexene‐3‐ol were always found to represent the main products, with cyclohexene oxide occasionally formed as a side product. The ratios of the different oxidation products varied with the reaction conditions: in the case of a peroxide/alkene ratio of 4:1, considerably more ketone than alcohol was obtained and cyclohexene oxide formation was almost negligible, whereas a ratio of 1:10 led to a significant increase of the alcohol proportion and to the formation of at least small amounts of the epoxide. Pre‐treatment of the dissolved [(Tp^R1,R2)M(Pz^Me,tBu)] pre‐catalysts with O₂ led to product distributions and TOFs that were very similar to those found in the absence of O₂, so that it may be argued that tBuOOH and O₂ both lead to the same active species. The results of EPR spectroscopy and ESI‐MS suggest that the initial product of the reaction of [(Tp^Me,Me)Mn(Pz^Me,tBu)] with O₂ contains a Mn^III(O)₂Mn^IV core. Prolonged exposure to O₂ leads to a different dinuclear complex containing three O‐bridges and resulting in different TOFs/product distributions. Analogous findings were made for other complexes and formation of these overoxidised products may explain the deviation of the catalytic performances if the reactions are carried out in an O₂ atmosphere.     

二（胍基）锆配合物的合成和表征

Addition of one equivalent of LiN（i-Pr）2 or LiN（CH2）5 to carbodiimides, RN=C=NR [R=cyclohexyl （Cy）, isopropyl （i-Pr）], generated the corresponding lithium of tetrasubstituted guanidinates {Li[RNC（N R^′2）NR]（THF）}2 [R=i-Pr, N R^′2=N（i-Pr）2 （1）, N（CH2）5 （2）; R=Cy, N R^′2=N（i-Pr）2 （3）, N（CH2）5 （4）]. Treatment of ZrCl4 with freshly prepared solutions of their lithium guanidinates provided a series of bis（guanidinate） complexes of Zr with the general formula Zr[RNC（N R^′2）NR]2Cl2 [R=i-Pr, N R^′2=N（i-Pr）2 （5）, N（CH2）5 （6）; R=Cy, N R^′2=N（i-Pr）2 （7）, N（CH2）5 （8）]. Complexes 1, 2, 5-8 were characterized by elemental analysis, IR and ^1H NMR spectra. The molecular structures of complexes 1, 7 and 8 were further determined by X-ray diffraction studies.     

Double stereoselective coordination of chiral N,S ligands: Synthesis,coordination chemistry and utilization in Pd‐catalyzed allylic alkylation

A series of chiral pentane‐2,4‐diyl‐based thioether‐amine ligands [ 4 and 5 ; (R,S)‐ and (S,S)‐R¹SCH(CH₃)CH₂CH(CH₃)NHR², respectively, where 4a R¹ = iPr, R² = Ph; 4b R¹ = tBu, R² = Ph; 4c R¹ = 1‐Ad, R² = Ph; 5a R¹ = iPr, R² = Ph; 5b R¹ = tBu, R² = Ph; 5c R¹ = 1‐Ad, R² = Ph; 5d R¹ = iPr, R² = 4‐MeOC₆H₄; 5e R¹ = iPr, R² = 4‐MeC₆H₄; 5f R¹ = iPr, R² = 3,5‐Me₂C₆H₃] with stereogenic S‐ and N‐donor atoms has been prepared starting from cyclic sulfates via optically pure γ‐aminoalcohol or 2,4‐dimethylazetidine intermediates. The synthesis of the novel diastereomerically related ligand sets 4 and 5 was accomplished starting from the same source of chirality. The modular ligand structure and the novel synthetic strategies developed for their synthesis allowed the easy modification of the ligands’ (i) S‐ and (ii) N‐substituents, as well as (iii) the relative stereochemistry within the ligand backbone. Six‐membered [Pd(N,S)Cl₂]‐type chelate complexes of the diastereomerically related ligands 4a and 5a were synthesized and characterized by X‐ray crystallography in the solid phase, by density functional theory calculations and in solution by NMR spectroscopy. The coordination of 5a resulted in the formation of a single chair conformation by the stereospecific locking of both stereolabile (N and S) donor atoms. In contrast, compound 4a forms rapidly equilibrating palladium species due to the fast inversion of the sulfur donor. Ligands with stereochemically fixed donor atoms provided robust and efficient catalytic systems that can be effectively applied in alkylene carbonates as green reaction media. Remarkably, the phosphine‐free catalysts are air‐stable, and at room temperature in the presence of moisture gave excellent ee’s (up to 93%) in asymmetric allylation processes thanks to the double stereoselective coordination.     

Unprecedented Reaction Pathway of Sterically Crowded Calcium Complexes: Sequential C−N Bond Cleavage Reactions Induced by C−H Bond Activations

Five bis(quinolylmethyl)‐(1H ‐indolylmethyl)amine (BQIA) compounds, that is, {(quinol‐8‐yl‐CH₂)₂NCH₂(3‐Br‐1H ‐indol‐2‐yl)} ( L¹H ) and {[(8‐R³‐quinol‐2‐yl)CH₂]₂NCH(R²)[3‐R¹‐1H ‐indol‐2‐yl]} ( L^2–5H ) ( L²H : R¹=Br, R²=H, R³=H; L³H : R¹=Br, R²=H, R³=i Pr; L⁴H : R¹=H, R²=CH₃, R³=i Pr; L⁵H : R¹=H, R²=n Bu, R³=i Pr) were synthesized and used to prepare calcium complexes. The reactions of L^1–5H with silylamido calcium precursors (Ca[N(SiMe₂R)₂]₂(THF)₂, R=Me or H) at room temperature gave heteroleptic products ( L^{1, 2} )CaN(SiMe₃)₂ ( 1 , 2 ), ( L^{3, 4} )CaN(SiHMe₂)₂ ( 3 a , 4 a ) and homoleptic complexes ( L^{3, 5} )₂Ca ( D3 , D5 ). NMR and X‐ray analyses proved that these calcium complexes were stabilized through Ca⋅⋅⋅C−Si, Ca⋅⋅⋅H−Si or Ca⋅⋅⋅H−C agostic interactions. Unexpectedly, calcium complexes (( L^3–5 )CaN(SiMe₃)₂) bearing more sterically encumbered ligands of the same type were extremely unstable and underwent C−N bond cleavage processes as a consequence of intramolecular C−H bond activation, leading to the exclusive formation of (E )‐1,2‐bis(8‐isopropylquinol‐2‐yl)ethane.     

The role of intermediate chain migration in propene polymerization using substituted {iPr(CpFlu)}ZrCl2/MAO catalysts

Comparison of pentad distributions obtained from NMR spectra and from a molecular mechanics‐based modeling approach is performed for the catalysts {ⁱPr(3‐X‐CpFlu)}ZrCl₂ (X = H, Me, Et, ⁱPr, ^tBu) at a range of different temperatures. In order to model the temperature dependency of the pentad distributions the variation in steric influence along with the change of the rotational energy level for catalysts with substituents displaying relatively low barriers to rotation is treated approximately by calculating energy profiles of 360° rotation of the alkyl groups. The temperature at which intermediate chain migration (back‐skip) or chain epimerization starts to be important seems to be rather constant (30–50°C) among the five catalysts. Even in the case of X = ^tBu, back‐skip seems to be unimportant for explaining the formation of isotactic polymer at room temperature.     

EINIGE NEUE THIOPHOSPHINSÄUREAMIDE R2P(S)NHR': SYNTHESE UND KERNRESONANZSPEKTROSKOPISCHE UNTERSUCHUNGEN

Abstract

P.P-Dialkylthiophosphinsäureamide R₂P(S)NHR' (R=Me, 'Pr, 'Bu; R'=Me, Et, ⁱPr. ^cHex. ^tBu. Ph. etc.) wurden erhalten durch Umsetzung von R₂PNHR' mit Schwefel oder durch Reaktion von Me₂P(S)CI mit primaren Aminen. Ihre ³¹P- und ¹³C-NMR-Spektren werden diskutiert. Insbesondere die Di-t-butylthiophosphinsäureamide sind auszilg;ergewöhnlich stabil gegen Hydrolyse und Luftsauerstoff. P,P-Dialkylthiophosphinic acid amides R₂P(S)NHR' (R=Me. ⁱPr. ^tBu; R'=Me, Et, ⁱPr, ^cHex. ^tBu, Ph. etc.) have been obtained by reaction of the corresponding aminophosphines with sulfur or by reaction of dimethylthiophosphorylhalides with primary amines. Their ³¹P- and ¹³C-NMR spectra are discussed. The di-t-butylthiophosphinic compounds proved to be remarkably stable against moisture and oxygen.     

Highly Active,Thermally Stable,Ethylene‐Polymerisation Pre‐Catalysts Based on Niobium/Tantalum?Imine Systems

The reactions of MCl₅ or MOCl₃ with imidazole‐based pro‐ligand L¹H, 3,5‐tBu₂‐2‐OH‐C₆H₂‐(4,5‐Ph₂‐1H‐)imidazole, or oxazole‐based ligand L²H, 3,5‐tBu₂‐2‐OH‐C₆H₂(1H‐phenanthro[9,10‐d])oxazole, following work‐up, afforded octahedral complexes [MX(L^{1, 2})], where MX=NbCl₄ (L¹, 1 a ; L², 2 a ), [NbOCl₂(NCMe)] (L¹, 1 b ; L², 2 b ), TaCl₄ (L¹, 1 c ; L², 2 c ), or [TaOCl₂(NCMe)] (L¹, 1 d ). The treatment of α‐diimine ligand L³, (2,6‐iPr₂C₆H₃N?CH)₂, with [MCl₄(thf)₂] (M=Nb, Ta) afforded [MCl₄(L³)] (M=Nb, 3 a ; Ta, 3 b ). The reaction of [MCl₃(dme)] (dme=1,2‐dimethoxyethane; M=Nb, Ta) with bis(imino)pyridine ligand L⁴, 2,6‐[2,6‐iPr₂C₆H₃N?(Me)C]₂C₅H₃N, afforded known complexes of the type [MCl₃(L⁴)] (M=Nb, 4 a ; Ta, 4 b ), whereas the reaction of 2‐acetyl‐6‐iminopyridine ligand L⁵, 2‐[2,6‐iPr₂C₆H₃N?(Me)C]‐6‐Ac‐C₅H₃N, with the niobium precursor afforded the coupled product [({2‐Ac‐6‐(2,6‐iPr₂C₆H₃N?(Me)C)C₅H₃N}NbOCl₂)₂] ( 5 ). The reaction of MCl₅ with Schiff‐base pro‐ligands L⁶H–L¹⁰H, 3,5‐(R¹)₂‐2‐OH‐C₆H₂CH?N(2‐OR²‐C₆H₄), (L⁶H: R¹=tBu, R²=Ph; L⁷H: R¹=tBu, R²=Me; L⁸H: R¹=Cl, R²=Ph; L⁹H: R¹=Cl, R²=Me; L¹⁰H: R¹=Cl, R²=CF₃) afforded [MCl₄(L^6–10)] complexes (M=Nb, 6 a – 10 a ; M=Ta, 6 b – 9 b ). In the case of compound 8 b , the corresponding zwitterion was also synthesised, namely [Ta^?Cl₅(L⁸H)⁺] ? MeCN ( 8 c ). Unexpectedly, the reaction of L⁷H with TaCl₅ at reflux in toluene led to the removal of the methyl group and the formation of trichloride 7 c [TaCl₃(L^7‐Me)]; conducting the reaction at room temperature led to the formation of the expected methoxy compound ( 7 b ). Upon activation with methylaluminoxane (MAO), these complexes displayed poor activities for the homogeneous polymerisation of ethylene. However, the use of chloroalkylaluminium reagents, such as dimethylaluminium chloride (DMAC) and methylaluminium dichloride (MADC), as co‐catalysts in the presence of the reactivator ethyl trichloroacetate (ETA) generated thermally stable catalysts with, in the case of niobium, catalytic activities that were two orders of magnitude higher than those previously observed. The effects of steric hindrance and electronic configuration on the polymerisation activity of these tantalum and niobium pre‐catalysts were investigated. Spectroscopic studies (¹H NMR, ¹³C NMR and ¹H? ¹H and ¹H? ¹³C correlations) on the reactions of compounds 4 a / 4 b with either MAO(50) or AlMe₃/[CPh₃]⁺[B(C₆F₅)₄]^? were consistent with the formation of a diamagnetic cation of the form [L⁴AlMe₂]⁺ (MAO(50) is the product of the vacuum distillation of commercial MAO at +50 °C and contains only 1 mol % of Al in the form of free AlMe₃). In the presence of MAO, this cationic aluminium complex was not capable of initiating the ROMP (ring opening metathesis polymerisation) of norbornene, whereas the 4 a / 4 b systems with MAO(50) were active. A parallel pressure reactor (PPR)‐based homogeneous polymerisation screening by using pre‐catalysts 1 b , 1 c , 2 a , 3 a and 6 a , in combination with MAO, revealed only moderate‐to‐good activities for the homo‐polymerisation of ethylene and the co‐polymerisation of ethylene/1‐hexene. The molecular structures are reported for complexes 1 a – 1 c , 2 b , 5 , 6 a , 6 b, 7 a, 8 a and 8 c .     

Simplified Approach to the Regiospecific Synthesis of Trichloromethylpyrazolines Using Microwave Irradiation

Twelve novel 3-alkyl[aryl]-1-carboxamides-5-trichloromethyl-5-hydroxy-4,5-dihydro-lH-pyrazole have been synthesized in good yields (72–90%) using environmentally benign microwave-induced techniques. The compounds were synthesized from the cyclocondensation of 4-alkoxy-1,1,1-trichloro-3-alkyl[aryl]-2-ones [Cl₃CC(O)C(R²) = C(R¹)OR, where R = Me, Et; R¹ = H, Me, Et, Pr, i-Pr, i-Bu, t-Bu, Ph, Ph-4-NO₂, Ph-4-F, Ph-4-Cl, Ph-4-Br; and R² = H, Me] with semicarbazide hydrochloride in the presence of pyridine and using methanol/water (3:1 v/v) as the solvent. The advantages of using microwave irradiation, rather than a conventional method, were demonstrated.     

Light‐Induced Rearrangement of Thioether‐Substituted Phosphanide Ligands: Scope and Limitations of a Remarkable Isomerization

Treatment of the thioether‐substituted secondary phosphanes R²PH(C₆H₄‐2‐SR¹) [R²=(Me₃Si)₂CH, R¹=Me ( 1_PH ), iPr ( 2_PH ), Ph ( 3_PH ); R²=tBu, R¹=Me ( 4_PH ); R²=Ph, R¹=Me ( 5_PH )] with nBuLi yields the corresponding lithium phosphanides, which were isolated as their THF ( 1 – 5_Pa ) and tmeda ( 1 – 5_Pb ) adducts. Solid‐state structures were obtained for the adducts [R²P(C₆H₄‐2‐SR¹)]Li(L)_n [R²=(Me₃Si)₂CH, R¹=nPr, (L)_n=tmeda ( 2_Pb ); R²=(Me₃Si)₂CH, R¹=Ph, (L)_n=tmeda ( 3_Pb ); R²=Ph, R¹=Me, (L)_n=(THF)_1.33 ( 5_Pa ); R²=Ph, R¹=Me, (L)_n=([12]crown‐4)₂ ( 5_Pc )]. Treatment of 1_PH with either PhCH₂Na or PhCH₂K yields the heavier alkali metal complexes [{(Me₃Si)₂CH}P(C₆H₄‐2‐SMe)]M(THF)_n [M=Na ( 1_Pd ), K ( 1_Pe )]. With the exception of 2_Pa and 2_Pb , photolysis of these complexes with white light proceeds rapidly to give the thiolate species [R²P(R¹)(C₆H₄‐2‐S)]M(L)_n [M=Li, L=THF ( 1_Sa , 3_Sa – 5_Sa ); M=Li, L=tmeda ( 1_Sb , 3_Sb – 5_Sb ); M=Na, L=THF ( 1_Sd ); M=K, L=THF ( 1_Se )] as the sole products. The compounds 3_Sa and 4_Sa may be desolvated to give the cyclic oligomers [[{(Me₃Si)₂CH}P(Ph)(C₆H₄‐2‐S)]Li]₆ (( 3_S )₆) and [[tBuP(Me)(C₆H₄‐2‐S)]Li]₈ (( 4_S )₈), respectively. A mechanistic study reveals that the phosphanide–thiolate rearrangement proceeds by intramolecular nucleophilic attack of the phosphanide center at the carbon atom of the substituent at sulfur. For 2_Pa / 2_Pb , competing intramolecular β‐deprotonation of the n‐propyl substituent results in the elimination of propene and the formation of the phosphanide–thiolate dianion [{(Me₃Si)₂CH}P(C₆H₄‐2‐S)]^2?.     

The Simplest Amino‐borane H2B=NH2 Trapped on a Rhodium Dimer: Pre‐Catalysts for Amine–Borane Dehydropolymerization

The μ‐amino–borane complexes [Rh₂(L^R)₂(μ‐H)(μ‐H₂B=NHR′)][BAr^F₄] (L^R=R₂P(CH₂)₃PR₂; R=Ph, ⁱPr; R′=H, Me) form by addition of H₃B?NMeR′H₂ to [Rh(L^R)(η⁶‐C₆H₅F)][BAr^F₄]. DFT calculations demonstrate that the amino–borane interacts with the Rh centers through strong Rh‐H and Rh‐B interactions. Mechanistic investigations show that these dimers can form by a boronium‐mediated route, and are pre‐catalysts for amine‐borane dehydropolymerization, suggesting a possible role for bimetallic motifs in catalysis.     

Synthesis and Characterization of Ruthenium Complexes with Substituted Pyrazino[2,3‐f][1,10]‐phenanthroline (=Rppl; R=Me,COOH, COOMe)

A series of substituted pyrazino[2,3‐f][1,10]‐phenanthroline (Rppl) ligands (with R=Me, COOH, COOMe) were synthetized (see 1 – 4 in Scheme 1). The ligands can be visualized as formed by a bipyridine and a quinoxaline fragment (see A and B ). Homoleptic [Ru(R¹ppl)₃](PF₆)₂ and heteropleptic [Ru(R¹ppl){(R²)₂bpy}₂](PF₆)₂ (R¹=H, Me, COOMe and R²=H, Me) metal complexes 5 – 7 and 8 – 13 , respectively, based on these ligands were also synthesized and characterized by conventional techniques (Schemes 2 and 3, resp.). In the heteroleptic complexes, the R¹‐ppl ligand reduces at a less‐negative potential than the bpy ligand, reflecting the acceptor property conferred by the quinoxaline moiety. The potentiality of some of these complexes as solar‐cell dyes is discussed.     

Chiral (1,2)‐Diphenylethylene‐Salen Complexes of Triel Metals: Coordination Patterns and Mechanistic Considerations in the Isoselective ROP of Lactide

The synthesis of enantiomerically pure aluminium, gallium and indium complexes supported by chiral (R,R)‐(^HHONNO^HH) ( 1 ), (R,R)‐(^MeHONNO^HMe) ( 2 ), (R,R)‐(^tButBuONNO^tButBu) ( 3 ), (R,R)‐(^MeNO2ONNO^MeNO2) ( 4 ), (R,R)‐(^HOMeONNO^HOMe) ( 5 ) and (R,R)‐(^ClClONNO^ClCl) ( 6 ) (1,2)‐diphenylethylene‐salen ligands is described. Several of these complexes have been crystallographically authenticated, which highlights a diversity of coordination patterns. Whereas all Ga complexes form [Ga₂(CH₂SiMe₃)₄(ONNO)] bimetallic species (ONNO= 1 – 3 ), aluminium [AlR(ONNO)] (R=Me, CH₂SiMe₃) and indium [In(CH₂SiMe₃)(ONNO)] derivatives are monometallic for ONNO= 1 , 2 and 4 – 6 , and only form the bimetallic complexes [Al₂R₄(ONNO)] and [In₂(CH₂SiMe₃)₄(ONNO)] for the most sterically crowded ligand 3 . The [AlMe(ONNO)] complexes react with iPrOH to give [AlOiPr(ONNO)] complexes that are robust towards further iPrOH. The [In(CH₂SiMe₃)(ONNO)] congeners are inert towards excess alcohol, whereas the Ga compounds decompose easily. All these alkyl complexes, as well as the [AlOiPr(ONNO)] derivatives, catalyse the ring‐opening polymerisation (ROP) of racemic lactide (rac‐LA). The [AlMe(ONNO)] complexes require additional alcohol to afford controlled reactions, but [AlOiPr(ONNO)] complexes are single‐component catalysts for the isoselective ROP of rac‐LA, with values of P_m in the range 0.80–0.90. Experimental evidence unexpectedly shows that chain‐end control leads to the isoselectivity of these aluminium catalysts; also, the more crowded the coordination sphere, the higher the isoselectivity. The bimetallic Ga complexes do not afford controlled reactions, but the binary [In(ONNO)(CH₂SiMe₃)/(PhCH₂OH)] systems competently mediate non‐stereoselective ROP; evidence is given that an activated monomer mechanism is at work. Kinetic studies show that catalytic activity decreases when electronic density and steric congestion at the metal atom increase.     

Stabilization of a Silaaldehyde by its η2 Coordination to Tungsten

Treatment of pyridine‐stabilized silylene complexes [(η⁵‐C₅Me₄R)(CO)₂(H)W?SiH(py)(Tsi)] (R=Me, Et; py=pyridine; Tsi=C(SiMe₃)₃) with an N‐heterocyclic carbene ^MeIⁱPr (1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) caused deprotonation to afford anionic silylene complexes [(η⁵‐C₅Me₄R)(CO)₂W?SiH(Tsi)][H^MeIⁱPr] (R=Me ( 1‐Me ); R=Et ( 1‐Et )). Subsequent oxidation of 1‐Me and 1‐Et with pyridine‐N‐oxide (1 equiv) gave anionic η²‐silaaldehydetungsten complexes [(η⁵‐C₅Me₄R)(CO)₂W{η²‐O?SiH(Tsi)}][H^MeIⁱPr] (R=Me ( 2‐Me ); R=Et ( 2‐Et )). The formation of an unprecedented W‐Si‐O three‐membered ring was confirmed by X‐ray crystal structure analysis.     

Synthesis and Crystal Structures of t‐Butyl‐Pyridine Adducts of ZnR2 (R = Me,i‐Pr,t‐Bu,Cp*)

Lewis acid‐base adducts of the general type R₂Zn(4‐tBuPy)_x (R = Me 1 , iPr 2 , tBu 3 , Cp* 4 ; x = 1, 2) were obtained in high yields from reactions of ZnR₂ with the Lewis base 4‐tBu‐Pyridine. Compounds 1 – 4 were characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy and elemental analyses, 1 and 4 also by X‐ray diffraction at single crystals.     

Titanium complexes bearing amine bis(phenolate) ligands: Synthesis,structure and catalysis in ring‐opening polymerization of lactide

Monomeric bis(isopropoxy) titanium complexes LTi(Oⁱ Pr)₂ (L =  ─ OC₆H₂–4‐R¹–6‐R²–2‐CH₂N[(CH₂)₂N(R³)₂]CH₂–4‐R⁴–6‐R⁵‐C₆H₂O ─ , R¹ = R² = ^t Bu, R³ = Et, R⁴ = R⁵ = Cl, (L¹)Ti(Oⁱ Pr)₂; R¹ = R² = Me, R³ = Et, R⁴ = R⁵ = Me, (L²)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Et, R⁴ = OMe, R⁵ = ^t Bu, (L³)Ti(Oⁱ Pr)₂; R¹ = R⁴ = OMe, R³ = Et, R² = R⁵ = ^t Bu, (L⁴)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Me, R⁴ = OMe, R⁵ = ^t Bu, (L⁵)Ti(Oⁱ Pr)₂) supported by amine bis(phenolate) ligands were synthesized and characterized using NMR spectroscopy and elemental analysis. The solid‐state structure of (L³)Ti(Oⁱ Pr)₂ was determined using single‐crystal X‐ray diffraction. (L^1–5)Ti(Oⁱ Pr)₂ were all found to initiate the ring‐opening polymerization of l ‐lactide and rac ‐lactide in a controlled manner at 110–160°C. As shown by kinetic studies, (L¹)Ti(Oⁱ Pr)₂ polymerized l ‐lactide faster than did (L^2–5)Ti(Oⁱ Pr)₂. In addition, good number‐average molecular weight and narrow polydispersity index (1.00–1.71) of polymers were also obtained. The microstructure of the polymers and a possible mechanism of coordination–insertion of polymerization were evidenced by MALDI‐TOF and ¹H NMR spectra of the polylactides.     

Phenalenyl‐Based Organozinc Catalysts for Intramolecular Hydroamination Reactions: A Combined Catalytic,Kinetic, and Mechanistic Investigation of the Catalytic Cycle

Herein, we report the synthesis and characterization of two organozinc complexes that contain symmetrical phenalenyl (PLY)‐based N,N‐ligands. The reactions of phenalenyl‐based ligands with ZnMe₂ led to the formation of organozinc complexes [N(Me),N(Me)‐PLY]ZnMe ( 1 ) and [N(iPr),N(iPr)‐PLY]ZnMe ( 2 ) under the evolution of methane. Both complexes ( 1 and 2 ) were characterized by NMR spectroscopy and elemental analysis. The solid‐state structures of complexes 1 and 2 were determined by single‐crystal X‐ray crystallography. Complexes 1 and 2 were used as catalysts for the intramolecular hydroamination of unactivated primary and secondary aminoalkenes. A combined approach of NMR spectroscopy and DFT calculations was utilized to obtain better insight into the mechanistic features of the zinc‐catalyzed hydroamination reactions. The progress of the catalysis for primary and secondary aminoalkene substrates with catalyst 2 was investigated by detailed kinetic studies, including kinetic isotope effect measurements. These results suggested pseudo‐first‐order kinetics for both primary and secondary aminoalkene activation processes. Eyring and Arrhenius analyses for the cyclization of a model secondary aminoalkene substrate afforded ΔH^≠=11.3 kcal mol^?1, ΔS^≠=?35.75 cal K^?1 mol^?1, and E_a=11.68 kcal mol^?1. Complex 2 exhibited much‐higher catalytic activity than complex 1 under identical reaction conditions. The in situ NMR experiments supported the formation of a catalytically active zinc cation and the DFT calculations showed that more active catalyst 2 generated a more stable cation. The stability of the catalytically active zinc cation was further supported by an in situ recycling procedure, thereby confirming the retention of catalytic activity of compound 2 for successive catalytic cycles. The DFT calculations showed that the preferred pathway for the zinc‐catalyzed hydroamination reactions is alkene activation rather than the alternative amine‐activation pathway. A detailed investigation with DFT methods emphasized that the remarkably higher catalytic efficiency of catalyst 2 originated from its superior stability and the facile formation of its cation compared to that derived from catalyst 1 .