Palladium on charcoal-catalyzed ligand-free Stille coupling

An efficient ligand-free Stille coupling reaction catalyzed by palladium on charcoal was developed. Tetraphenyltin was reacted with a variety of aryl halides including aryl chlorides using LiCl as an additive. The reactions of tributyl organotin compounds with aryl iodides were effectively expedited by the addition of LiF. These reactions efficiently proceeded without a phosphine or arsenic ligand and no leached palladium was detected in the reaction mixture.     

钯催化气相氧化羰基化合成碳酸二甲酯

通过催化剂反应性能和反应前后XPS谱图对比，分析了负载型钯催化剂在甲醇气相氧化羰基化合成碳酸二甲酯过程中的失活原因，研究了HCl在维持催化剂活性及失活催化剂再生中的作用．结果表明，氯离子的流失是负载型钯碳催化剂失活的主要原因．由于氯离子的流失，对于PdCl2／AC催化剂，钯很容易从二价变为零价：对于PdCl2-CuCl2／AC催化剂，CuCl2发生变化，失去使钯保持二价氯化物状态的功能．在反应过程中补充HCl可以延长催化剂的寿命，也可以利用HCl对失活催化剂进行再生，但采用HCl不能从根本上解决催化剂失活的问题．     

Manipulating the Oxidation State of CuxO Catalysts to Optimize the Selectivity of Gaseous Products in Electrochemical CO2 Reduction

Copper-based (Cu-based) catalysts can efficiently convert carbon dioxide to multicarbon products by electrochemical reduction. In this paper, the electrocatalyst with the coexistence of three valence states of Cu(0)-Cu(I)-Cu(II) was successfully prepared by adjusting the experimental conditions. The catalyst was derived from Cu/Cu₂O prepared on carbon cloth and exhibited excellent CO₂ reduction performance. For carbon-gaseous products, the Faradaic efficiencies for the Cu-2 catalyst consisting of Cu(0)-Cu(I)-Cu(II) were 35.45±3.40 % at −1.66 V vs. RHE, of which 23.85±1.18 % for C₂H₄. And the synergistic effect of Cu(0)-Cu(I)-Cu(II) significantly improved the selectivity of the catalyst to C₂H₄. This paper provided an efficient method to rationally tune the valence state of Cu-based catalysts to improve CO₂ reduction performance.     

钯催化甲酸为氢源的芳硝基化合物直接加氢和一锅法酰胺化

Pd/C催化剂实现了甲酸为氢源的芳硝基化合物的直接加氢及甲酸为氢源和羰基源的一锅法芳硝基化合物的酰胺化.在芳硝基化合物的直接加氢过程中,该体系体现了很好的催化活性,实现了对同时带有其它可还原官能团的芳硝基化合物的选择性加氢,得到较高收率的胺类化合物.同时,通过提高反应温度和增加甲酸的量,实现了芳硝基化合物的加氢和甲酰化的串联反应,该体系体现了较高的催化活性.     

Palladium Biosensor

In this paper we proposed a palladium(II) biosensor. The biosensor is based on determining of interactions between palladium(II) and metallothionein modified hanging mercury drop electrode by means of differential pulse voltammetry. We studied influence of two supporting electrolytes (potassium or sodium chloride) on the signals of the biosensor. Based on the results obtained we found potassium chloride (0.05 M) as the most suitable supporting electrolyte to determine palladium(II). The detection limit of the biosensor for palladium ions was evaluated as 100 nM with RSD about 10%. Moreover, we utilized the biosensor for measurement of the target molecule in the presence of human blood serum and human urine.     

Palladium complex catalyst immobilized on epoxy support under supercritical conditions

The aim of this research was to obtain a new-generation complex catalyst under supercritical carbon dioxide. A new complex catalyst based on epoxy resin cured with multifunctional polythiourethane was prepared. The use of polythiourethane as a hardener allowed us to introduce linking groups into the structure of the polymer without further functionalization of the resin. Additionally, the use of supercritical CO₂ enabled a more accurate and better distribution of the metal complex in the polymer matrix. The presence of the functional groups allowed us to obtain a catalyst wherein the metal centers had a different electronic structure and various degrees of oxidation, so that such a system was characterized by its high selectivity. The catalytic properties of the prepared catalysts were tested in the hydrogenation reaction. Research methods like time-of-flight secondary-ion mass spectrometry (ToF–SIMS), infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and nitrogen BET surface area measurements were used to characterize polymeric support and heterogenized catalysts.     

Palladium catalyzed allylation of nitroalkanes with allyl chlorides

The palladium catalyzed synthesis of allylnitro compounds from allyl chlorides and nitroalkanes is described.

---

Palladium-katalysierte Allylierung von Nitroalkanen mit Allylchlorden (Kurze Mitteilung)

Zusammenfassung Die Palladium-katalysierte Darstellung von Allylverbindungen aus Allylchloriden und Nitroalkanen wird beschrieben.

     

添加剂作用下钯电沉积行为研究

在含有4 g•L－1 Pd(NH3)2Cl2和104 g•L－1 NH4H2PO4的闪镀钯基础电解液中,采用极化曲线、循环伏安法和计时安培法研究添加剂作用下钯在玻璃碳电极上的电沉积和电结晶行为.结果表明,添加剂阻化钯的电沉积;钯在玻碳电极上的交换电流密度很低;钯电沉积过程经历了晶核形成过程,其电结晶机理在不含添加剂时接近于三维连续成核,含添加剂时接近于三维瞬时成核.     

Pd催化剂在甲醇裂解中的应用研究进展

贵金属Pd是甲醇分解反应常用的催化剂，本文综述了不同载体负载的Pd催化剂的催化性能以及反应条件对其催化活性、选择性和稳定性的影响。并介绍了其中一些催化剂的制备方法，对催化反应动力学和催化机理进行了简要的概括。     

Photochemistry of Methane on Pd/Al2O3 Model Catalysts: Control of Photochemistry on Transition Metal Surfaces

The mean size of the Pd clusters deposited on an Al₂O₃ thin film influences the efficiency of photodissociation of CD₄ into CD₃ and D as well as the photodesorpion upon irradiation with 193-nm laser light. The picture shows the degree of desorption on Pd clusters of various sizes (as well as on a Pd(111) single-crystal surface) as a function of temperature; the values given refer to the average thickness of the evaporated metal layer.     

Heterogenization of Metallocene Catalysts for Alkene Polymerization

Beyond mere convenience: In large-scale industrial processes for alkene polymerization the essentially homogeneous metallocene/activator catalyst systems are heterogenized (example shown) to improve polymer properties. New mesoporous and organic catalyst supports and their application in this field of catalysis are described.     

烯丙基钯催化区域选择性氧化制备甲基酮的研究

报道了以氯化钯作催化剂，区域选择性氧化９－烯丙基－１－氧代－４－氮杂双环（４．３．０）壬烷及１０－烯丙基－１－氧代－４－氮杂双环（５．３．０）癸烷，制备了９－丙酮基－１－氧化－４－氮杂双环（４．３．０）壬烷及１０－丙酮基－１－氧代－４－氮杂双环（５．３．０）癸烷。比较了不同催化条件和溶剂系统的反应收率，发现以ＰｄＣｌ２／对－苯醌为催化系统和以含水的ＤＭＦ溶剂系统氧化收率最高。     

Efficient Assays for Combinatorial Methods for the Discovery of Catalysts

The revolutionary developments in combinatorial approaches to pharmaceutical science are now being explored in such diverse areas as materials design and homogeneous and heterogeneous catalysis. The quest for more efficient and selective catalysts has created the desire to design parallel assays for catalytic activity in combinatorial studies. This contribution highlights some of the recent exciting developments in this area.     

An imidazolium ionic liquid having covalently attached an oxime carbapalladacycle complex as ionophilic heterogeneous catalysts for the Heck and Suzuki-Miyaura cross-coupling

An oxime carbapalladacycle, analogous to that used as catalyst in homogeneous phase, has been derivatized to increase its ionophilicity by introducing an imidazolium group covalently attached through a chain at the complex. The resulting complex is soluble in 1-butyl-3-methylimidazolium ionic liquid (bmimPF₆) and not extractable by ether. The catalytic activity of this palladium complex in bmimPF₆ is, however, unsatisfactory and only increases marginally in bmimPF₆/supercritical CO₂. This limitation has been overcome by supporting this imidazolium palladium complex on high surface area Al/MCM-41 aluminosilicate, whereby a solid active catalyst for the Suzuki cross-coupling has been obtained. Reusability and stability over reuse for this Al/MCM-41-supported catalyst have been studied.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers

Transition‐metal‐catalyzed copolymerization of olefins with polar monomers represents a challenge because of the large variety of substrate‐induced side reactions. However, this approach also holds the potential for the direct synthesis of polar functionalized polyolefins with unique properties. After decades of research, only a few catalyst systems have been found to be suitable for this reaction. Some major advances in catalyst development have been made in the past five years. This Minireview summarizes some of the recent progress in the extensively studied Brookhart and Drent catalyst systems, as well as emerging alternative palladium and nickel catalysts.     

分子筛限域单原子金属催化剂的研究进展

分子筛由于具有规则的微孔孔道结构、 较大的表面积、 优异的(水)热稳定性, 被认为是限域合成超小尺寸金属物种的理想载体. 近年来, 分子筛限域单原子金属催化剂由于超高的金属分散度、 接近100%的金属利用率以及独特的电子结构, 被广泛地应用于重要的催化反应和气体吸附分离过程. 本文系统地总结了近年来分子筛限域不同类型单原子金属催化剂的合成策略, 以及其在多相催化和气体分离等领域的研究进展. 最后, 提出了分子筛限域单原子金属催化剂在合成与表征方面存在的挑战和未来的发展方向.     

水滑石负载钯催化剂上的醇无氧脱氢反应

 研究了多种载体负载 Pd 催化剂上苯甲醇无氧脱氢反应. 结果发现, 以兼具较强酸性和碱性的水滑石 (HT) 为载体时, Pd 催化剂具有优异的苯甲醇转化活性和苯甲醛选择性, 当 Pd 含量为 0.32%~0.55% 时催化性能最佳. Pd/HT 催化剂可重复使用, 且对于含推电子取代基的芳香醇、2-噻吩甲醇、α,β-不饱和醇与环状脂肪醇等的直接脱氢反应均具有较好催化性能. HT 表面的 Pd(II) 物种反应后转变为平均粒径为 2.0~2.5 nm 的 Pd 纳米粒子或纳米簇. 具有较高分散度的 Pd(II) 物种易转变为较小的 Pd 纳米粒子, 从而具有较佳的催化性能. 本文推测, 催化剂表面的碱性位可促进苯甲醇 O–H 键的活化, 形成 Pd-苯甲氧基中间体, 该中间体进一步脱氢生成苯甲醛和 Pd-H 物种; 而催化剂表面的质子酸位可与 Pd-H 作用, 促进 H2 的脱除.     

Palladium nanoparticles: Chemoselective control for reductive Heck with aryl triflates and 2,3-dihydrofuran

The reductive-Heck reaction offers a unique entry to formal Csp²-Csp³ cross-coupling reactions that proceed in the absence of a main group organometallic coupling partner. Consequently, further development of new variants would be transformative. Unfortunately, controlling the relative rates of the organopalladium intermediates has proven difficult with homogenous, single-site Pd catalysts. This work describes a selective reductive Heck reaction catalyzed by Pd-nanoparticles. The reaction works well with electron-deficient aryl triflates at room temperature in the absence of ligands. This work addresses some of the challenges found in the reductive-Heck literature.     

Palladium(II)-catalyzed ring expansion of a 1-alkenyl cyclopentanol

7,7-Dimethyl-2-methylenenorbornan-1-ol, a strained bicyclic 1-alkenyl cyclopentanol, undergoes Wagner-Meerwein rearrangement to fenchone under treatment with a catalytic amount of PdCl₂(PPh₃)₂ in refluxing N-methylpyrrolidin-2-one. The described reaction constitutes the first example of the palladium(II)-catalyzed ring expansion of 1-alkenyl cyclopentanols to the corresponding cyclohexanones.