β‐Hairpins Generated from Hybrid Peptide Sequences Containing both α‐ and β‐Amino Acids

The incorporation of the β‐amino acid residues into specific positions in the strands and β‐turn segments of peptide hairpins is being systematically explored. The presence of an additional torsion variable about the C(α) C(β) bond (θ) enhances the conformational repertoire in β‐residues. The conformational analysis of three designed peptide hairpins composed of α/β‐hybrid segments is described: Boc‐Leu‐Val‐Val‐^DPro‐β Phe ‐Leu‐Val‐Val‐OMe ( 1 ), Boc‐Leu‐Val‐β Val ‐^DPro‐Gly‐β Leu ‐Val‐Val‐OMe ( 2 ), and Boc‐Leu‐Val‐β Phe ‐Val‐^DPro‐Gly‐Leu‐β Phe ‐Val‐Val‐OMe ( 3 ). 500‐MHz ¹H‐NMR Analysis supports a preponderance of β‐hairpin conformation in solution for all three peptides, with critical cross‐strand NOEs providing evidence for the proposed structures. The crystal structure of peptide 2 reveals a β‐hairpin conformation with two β‐residues occupying facing, non‐H‐bonded positions in antiparallel β‐strands. Notably, βVal(3) adopts a gauche conformation about the C(α) C(β) bond (θ=+65°) without disturbing cross‐strand H‐bonding. The crystal structure of 2 , together with previously published crystal structures of peptides 3 and Boc‐β Phe ‐β Phe ‐^DPro‐Gly‐β Phe ‐β Phe ‐OMe, provide an opportunity to visualize the packing of peptide sheets with local ‘polar segments' formed as a consequence of reversal peptide‐bond orientation. The available structural evidence for hairpins suggests that β‐residues can be accommodated into nucleating turn segments and into both the H‐bonding and non‐H‐bonding positions on the strands.     

NMR‐Structural Investigations of a β3‐Dodecapeptide with Proteinogenic Side Chains in Methanol and in Aqueous Solutions

The structural properties of an all‐β³‐dodecapeptide with the sequence H‐β‐HLys(N^ε‐CO(CH₂)₃‐S Acm)‐β‐HPhe‐β‐HTyr‐β‐HLeu‐β‐HLys‐β‐HSer‐β‐HLys‐β‐HPhe‐β‐HSer‐β‐HVal‐β‐HLys‐β‐HAla‐OH ( 1 ) have been studied by two‐dimensional homonuclear ¹H‐NMR and by CD spectroscopy. In MeOH solution, high‐resolution NMR spectroscopy showed that the β‐dodecapeptide forms an (M)‐3₁₄‐helix, and the CD spectrum corresponds to the pattern expected for an (M)‐3₁₄‐helical secondary structure. In aqueous solution, however, the peptide adopts a predominantly extended conformation without regular secondary‐structure elements, which is in agreement with the absence of the characteristic trough near 215 nm in the CD spectrum. The NMR and CD measurements with solutions of 1 in MeOH containing 3M urea further indicated that the peptide retains the regular secondary structural elements under these conditions, whereas, after addition of 40% (v/v) H₂O to the MeOH solution, the large ¹H‐chemical‐shift dispersion indicative of a defined spatial peptide fold was lost. The β³‐dodecapeptide is – so far – the longest β‐peptide shown to adopt a regular (M)‐3₁₄‐helix conformation in an organic solvent. The observation that the structure of this long β³‐peptide is not maintained in aqueous solution indicates that the (M)‐3₁₄‐fold is primarily stabilized by short‐range interactions.     

Preparation and characterization of poly(ethylene oxide)‐loaded hydroxypropyl‐β‐cyclodextrin nanofibers

Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) is a modified β‐cyclodextrin (β‐CD) derivative, which is toxicologically harmless to mammals and other animals. HP‐β‐CD is electrospun from an aqueous solution by blending with a non‐toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). Aqueous solutions containing different HP‐β‐CD/PEO blends (50:50–80:20) with variable concentrations (4 wt%–12 wt%) were used. Scanning electron microscope was used to investigate the morphology of the fibers, and Fourier transform infrared spectroscopy analysis confirmed the presence of HP‐β‐CD in the fiber. Uniform nanofibers with an average diameter of 264, 244, and 236 nm were obtained from 8 wt% solution of 50:50, 60:40, and 70:30 HP‐β‐CD/PEO, respectively. The average diameter of the fiber was decreased with increasing of HP‐β‐CD/PEO ratio. However, a higher proportion of HP‐β‐CD in the spinning solution increased beads in the fibers. The polymer concentration had no significant effect on the fiber diameter. The most uniform fibers with the narrowest diameter distribution were obtained from the 8 wt% of 50:50 solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of β‐Hexa‐ and β‐Heptapeptides Containing Novel β2,3‐Amino Acids with Two Serine or Two Cysteine Side Chains – CD‐ and NMR‐Spectroscopic Evidence for 314‐Helical Secondary Structures in Water

Two representatives of a new type of β‐amino acids, carrying two functionalized side chains, one in the 2‐ and one in the 3‐position, have been prepared stereoselectively: a β‐Ser derivative with an additional CH₂OH group in the 2‐position (for β‐peptides with better water solubility; Scheme 2) and a β‐HCys derivative with an additional CH₂SBn group in the 2‐position (for disulfide formation and metal complexation with the derived β‐peptides; Scheme 3). Also, a simple method for the preparation of α‐methylidene‐β‐amino acids is presented (see Boc‐2‐methylidene‐β‐HLeu‐OH, 8 in Scheme 3). The two amino acids with two serine or two cysteine side chains are incorporated into a β‐hexa‐ and two β‐heptapeptides ( 18 and 23/24 , resp.), which carry up to four CH₂OH groups. Disulfide formation with the β‐peptides carrying two CH₂SH groups generates very stable 1,2‐dithiane rings in the centre of the β‐heptapeptides, and a cyclohexane analog was also prepared (cf. 27 in Scheme 6). The CD spectra in H₂O clearly indicate the presence of 3₁₄‐helical structures of those β‐peptides ( 18 , 23 , 24 , 27b ) having the `right' configurations at all stereogenic centers (Fig. 2). NMR Measurements (Tables 1 and 2, and Fig. 4) in aqueous solution of one of the new β‐peptides ( 24 ) are interpreted on the assumption that the predominant secondary structure is the 3₁₄‐helix, a conformation that has been found to be typical for β‐peptides in MeOH or pyridine solution, according to our previous NMR investigations.     

Investigation of the Interactions of β‐Peptides with DNA Duplexes by Circular Dichroism Spectroscopy

The interaction of β‐peptides with the DNA duplexes of dA₂₀dT₂₀ and a GCN4‐binding CRE sequence was examined. To gauge the factors that govern these interactions, two β‐pentadecapeptides, 1 and 2 , a β‐dodecapeptide, 3 , three β‐decapeptides, 4 – 6 , three β‐heptapeptides, 7 – 9 , and β‐octaarginine 10 were designed and synthesized. The β‐peptides were conceived to adopt a β‐peptide 3₁₄ helix, in which the side chains at position i and i + 3 are aligned vertically along one side of the helix. The side chains of Lys, Asn, and Arg were positioned such that potential H‐bonding sites were created for a helical conformation to interact with the base pairs of DNA. CD Analysis showed that β‐peptides 1, 2 , and 10 interacted with dA₂₀dT₂₀. In addition, β‐peptides 1 and 2 showed significant interaction with a DNA‐duplex 20mer containing the ATF/CREB recognition sequence for the regulatory protein GCN4. It is impossible, at this stage of the investigation, to make a safe proposal about the actual nature of the interaction of the structures(s) of the complexes, the formation of which is suggested by the CD spectra reported herein.     

Evidence that the β‐Peptide 14‐Helix is Stabilized by β3‐Residues with Side‐Chain Branching Adjacent to the β‐Carbon Atom

Oligomers of β‐substituted β‐amino acids (‘β³‐peptides') are known to adopt a helical secondary structure defined by 14‐membered ring hydrogen bonds ('14‐helix'). Here, we describe a deca‐β³‐peptide, 1 , that does not adopt the 14‐helical conformation and that may prefer an alternative secondary structure. β³‐Peptide 1 is composed exclusively of residues with side chains that are not branched adjacent to the β‐C‐atom (β³‐hLeu, β³‐hLys, and β³‐hTyr). In contrast, an analogous β‐peptide, 2 , containing β³‐hVal residues in place of the β³‐hLeu residues of 1 , adopts a 14‐helical conformation in MeOH, according to CD data. These results illustrate the importance of side‐chain branching in determining the conformational preferences of β³‐peptides.     

Oligomers of β2- and of β3-Homoproline: What are the Secondary Structures of β-Peptides Lacking H-Bonds?

To study the role of H-bonds in stabilizing β-peptidic secondary structures, we have synthesized β-oligopeptides (up to the octadecamer 12 ) consisting of β²- and β³-homoproline, i.e., β-peptides lacking amide protons. The enantiomer purity of the building block β²-homoproline (nipecotic acid, 4 ) was determined by HPLC analysis of the N-(2,4-dinitrophenyl) derivative 5 on a Chiralcel-OD column (cf. Fig. 2). The CD spectra of the all-(S)-β²- and all-(S)-β³-HPro-containing β-peptides display novel and intensive CD patterns which may be indicative of a secondary structure (cf. Fig. 3). It is noteworthy that a distinct CD pattern was observed with the β³-HPro derivatives containing as few as three residues ( 7a ). The crystal structure of a N-deprotected β³-HPro-tripeptide 7c is presented (cf. Figs. 4 and 5), and a model for the structure of β-peptides consisting of β³-HPro is discussed (cf. Figs. 6 and 7).     

A Functionalized Spiro[chlorin‐porphyrin]‐Type ‘Dimer’ Dizinc Complex from Rapid [4+2] Self‐cycloaddition of a Conjugated [β,β′‐Bis(methylene)porphyrinato]zinc

Thermal extrusion of SO₂ from β,β′‐sulfolenoporphyrins is an effective method for in situ generation of β,β′‐bis(methylene)porphyrin which remained unobserved in typical synthetic applications but underwent quickly efficient [4+2]‐cycloaddition reactions with dienophiles.We now report the thermal extrusion of SO₂ from the symmetrical (tetra‐β,β′‐sulfolenoporphyrinato)zinc 1?Zn in the absence of a dienophile (Scheme). In the event, the thermally in situ generated conjugated diene underwent a [4+2] self‐cycloaddition, to give the {spirobi[tri‐β,β′‐sulfolenoporphyrinato]}dizinc 4?2Zn . This chiral (racemic) spirobiporphyrinoid dizinc complex represents the combination of the closely positioned and interacting chromophores of a (porphyrinato)zinc and of a (β‐methylene‐β,β′‐dihydroporphyrinato)zinc. It carries six sulfoleno moieties that are still available for further SO₂ extrusion and cycloaddition reactions.     

β-Homoalanyl PNAs: Synthesis and Indication of Higher Ordered Structures

Self-pairing complexes with extraordinarily high stability are formed by β-PNAs with four to six units of the nucleo-β-amino acid 1 . The key step in the synthesis is a Mitsunobu reaction between a β-homoserine and a purine derivative.     

Syntheses and CD‐Spectroscopic Investigations of Longer‐Chain β‐Peptides: Preparation by Solid‐Phase Couplings of Single Amino Acids,Dipeptides, and Tripeptides

The synthesis and CD‐spectroscopic analysis of eleven water‐soluble β‐peptides composed of all‐β³ or alternating β²‐ and β³‐amino acids is described. Different approaches for the efficient syntheses of longer‐chain β‐peptides (>9 residues) were investigated. They were synthesized on solid phase with Fmoc‐protected amino acids or Fmoc‐protected di‐ or tripeptide fragments (assembled using solution‐phase synthesis). The use of preformed fragments significantly increased the purity of the crude peptides and facilitated purification. Especially, the use of Fmoc‐protected β²/β³‐dipeptides for the synthesis of a ‘mixed' β²/β³‐nonapeptide proved to be remarkably effective, yielding the crude peptide in 95% purity and without detectable epimerization of the β²‐amino acid residues. This is a significant improvement over previously reported procedures for the solid‐phase synthesis of β‐peptides, and foreshadows that the field of β‐peptide research will now switch from synthesis to the design and study of complex functional ‘β‐proteins'.     

Zn2+‐Complexation by a β‐Peptidic Helix and Hairpin Containing β3hCys and β3hHis Building Blocks: Evidence from CD Measurements. Preliminary Communication

Two new β³‐homohistidine‐ and β³‐homocysteine‐containing β‐peptides have been prepared by solid‐phase synthesis. A β‐octapeptide ( 2 ) contains seven β³‐amino acids and one β²‐amino acid. The β²/β³ segment has been placed in the middle of this peptide, which contains β³‐amino acids of alternating configuration, to induce the formation of a hairpin secondary structure. A β‐decapeptide ( 3 ) has been designed to fold to a 3₁₄‐helical secondary structure with neighboring His side chains in 6‐ and 9‐positions. Circular‐dichroism (CD) measurements show the capability of both peptides to bind Zn²⁺ ions in aqueous solution. In the case of the β‐octapeptide, binding of Zn²⁺ causes a dramatic change of the CD spectrum, indicating a change or a stabilization of its secondary structure. Zn²⁺ Ions clearly stabilize the 3₁₄‐helix of the β‐decapeptide, in neutral and basic solution. For the construction of the two new β‐peptides, we needed to have a supply of the β‐amino acid derivatives Fmoc‐β³hCys(Trt)‐OH and Fmoc‐β³hHis(Trt)‐OH, the preparation of which is described herein.     

NMR‐Solution Structures of Fluoro‐Substituted β‐Peptides: A 314‐Helix and a Hairpin Turn. The First Case of a 90° OC?C?F Dihedral Angle in an α‐Fluoro‐Amide Group

To further study the preference of the antiperiplanar (ap) conformation in α‐fluoro‐amide groups, two β‐peptides, 1 and 2 , containing a (2‐F)‐β³hAla and a (2‐F)‐β²hPhe residue, have been synthesized. Their NMR‐solution structures in CD₃OH were determined and compared with those of non‐F‐substituted analogs, 3 and 4a . While we have found in a previous investigation (Helv. Chim. Acta 2005 , 88, 266) that a stereospecifically introduced F‐substituent in the central position of a β‐heptapeptide is capable of ‘breaking’ the 3₁₄‐helical structure by enforcing the F? C? C?O ap‐conformation, we could now demonstrate that the same procedure leads to a structure with the unfavorable ca. 90° F? C? C?O dihedral angle, enforced by the 3₁₄‐helical folding in a β‐tridecapeptide (cf. 1 ; Fig. 4). This is interpreted as a consequence of cooperative folding in the longer β‐peptide. A F‐substituent placed in the turn section of a β‐peptidic hairpin turn was shown to be in an ap‐arrangement with respect to the neighboring C?O bond (cf. 2 ; Fig. 7). Analysis of the non‐F‐substituted β‐tetrapeptides (with helix‐preventing configurations of the two central β²/β³‐amino acid residues) provides unusually tight hairpin structural clusters (cf. 3 and 4a ; Figs. 8 and 9). The skeleton of the β‐tetrapeptide H‐(R)β³hVal‐(R)β²hVal‐(R)β³hAla‐(S)β³hPhe‐OH ( 4a ) is proposed as a novel, very simple backbone structure for mimicking α‐peptidic hairpin turns.     

Solid‐Phase Synthesis of a β‐Dodecapeptide with Seven Functionalized Side Chains and CD‐Spectroscopic Evidence for a Dramatic Structural Switch When Going from Water to Methanol Solution

An all‐β³‐dodecapeptide with a protected N‐terminal thiol‐anchoring group and with seven side chains has been synthesized in multi‐mg amounts by the manual solid‐phase technique, applying Fmoc methodology and the Wang resin. The sequence is β‐HLys‐β‐HPhe‐β‐HTyr‐β‐HLeu‐β‐HLys‐β‐HSer‐β‐HLys‐β‐HPhe‐β‐HSer‐β‐HVal‐β‐HLys‐β‐HAla‐OH (from N‐ to C‐terminus; see 1 ). The functional groups in the side chains of the building blocks were Boc (β‐HLys) or t‐Bu ether (β‐HSer, β‐HTyr) protected to allow for simultaneous deprotection and detachment from the resin with trifluoroacetic acid. All coupling steps were achieved with HBTU (=O‐(1H‐benzotriazol‐1‐yl)‐1,1,3,3‐tetramethyl uronium hexafluorophosphate)/HOBt (=1‐hydroxy‐1H‐benzotriazole) in DMF. For Fmoc (=(9H‐fluoren‐9‐yl)methoxycarbonyl) deprotection, a protocol was developed to surmount the previously reported problems arising in solid‐phase synthesis of β‐peptides when the chain length exceeds seven or eight amino‐acid moieties: for up to seven amino acids, a 20% solution of piperidine in DMF was used for removal of Fmoc; for the subsequent five amino acids, DBU and piperidine were employed for complete deprotection. The crude product was purified by preparative reversed‐phase HPLC, and the yield of pure β‐dodecapeptide derivative ( 1 ) was 23%. As the compound is well‐soluble in H₂O, it was characterized by ¹H‐NMR (in MeOH and H₂O), ¹³C‐NMR (in MeOH), and CD spectroscopy (in MeOH and in H₂O at pH values ranging from 3.5 to 11), and its molecular weight and composition were confirmed by high‐resolution mass spectrometry (Figs. 1 – 4). In MeOH solution, the β‐dodecapeptide exhibits the expected CD pattern typical of an (M)‐3₁₄‐helical secondary structure. In H₂O, however, the characteristic trough near 215 nm is missing in the CD spectrum, only a strong positive Cotton effect at 202 nm was observed, indicating the presence of β‐peptidic secondary structures, containing ten‐membered H‐bonded rings, such as the 12/10 helix (Fig. 4, right) or the hairpin. Only a detailed NMR solution‐structure analysis will provide the clues necessary for understanding the effects leading to the observed dramatic structural change of the highly functionalized β‐dodecapeptide described.     

The Cyclo‐β‐Tetrapeptide (β‐HPhe‐β‐HThr‐β‐HLys‐β‐HTrp): Synthesis,NMR Structure in Methanol Solution,and Affinity for Human Somatostatin Receptors

The known solid‐state structure (Fig. 1, top) of cyclo(β‐HAla)₄ was used to model the structure of the title compound 1 as a prospective somatostatin mimic (Fig. 1, bottom). The synthesis started with the N‐protected natural amino acids Boc‐Phe‐OH, Boc‐Trp‐OH, Boc‐Lys(2‐Cl‐Z)‐OH, and Boc‐Thr(OBn)‐OH, which were homologated to the corresponding β‐amino‐acid derivatives (Scheme 1) and coupled to the β‐tetrapeptide Boc‐β‐HTrp‐β‐HPhe‐β‐HThr(OBn)‐β‐HLys(2‐Cl‐Z)‐OMe ( 16 ); the (N‐Me)‐β‐HThr‐(N‐Me)‐β‐HPhe analog 17 was also prepared. C‐ and N‐terminal deprotection and cyclization through the pentafluorophenyl ester gave the insoluble β‐tetrapeptide with protected Thr and Lys side chains ( 18 ). Solubilization and debenzylation could only be effected in LiCl‐containing THF (ca. 10% yield; with ca. 55% recovery). HPLC Purification provided a sample of the title compound 1 , the structure of which, as determined by NMR‐spectroscopy (Fig. 2, left) was drastically different from the `theoretical' model (Fig. 1). There is a transannular H‐bond dividing the macrocyclic 16‐membered ring, thus forming a ten‐ and a twelve‐membered H‐bonded ring, the former mimicking, or actually being superimposable on, an α‐peptidic so‐called β‐turn. Still, the four side chains occupy equatorial positions on the ring, as planned, albeit with somewhat different geometry as compared to the `original'. The cyclo‐β‐tetrapeptide has micromolar affinities to the human somatostatin receptors (hsst 1 – 5). Thus, we have demonstrated for the first time that it is possible to mimic a natural peptide hormone with a small β‐peptide. Furthermore, we have discovered a simple way to construct the ubiquitous β‐turn motif with β‐peptides (which are known to be stable to mammalian peptidases).     

An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

Stress-induced Solid-Solid Crystal Transition in Trans-1,4-polyisoprene

The polymorphic transition of trans-1,4-polyisoprene(TPI) during stretching was investigated by in situ wide-angle X-ray diffraction and Fourier transform infrared spectroscopy. The influences of the initial structure, stretching temperature, and strain rate on the contents of different crystal modifications(α, β) were explored. The results confirm that the α-β transition occurs during stretching of TPI that only contains αcrystal(α-TPI). When the stress is relaxed, the β crystal formed during stretching remains, which indicates that the transition is irreversible. On the other hand, stretching of TPI that only contains β crystal(β-TPI) results in orientated β crystal. No β-α transition occurs during stretching. The different structures of stretched α-TPI and β-TPI exclude the previously proposed "melting-recrystallization mechanism". The α-β transition depends significantly on temperature and strain rate, indicating the transition is governed both by thermodynamics and kinetics. Our results support a solid-solid transition mechanism rather than a melting-recrystallization mechanism. The irreversible nature of the transition is attributed to the metastability of the β phase in the unstretched state. Different from the "β phases" that appear in polymers with stress-induced reversible transitions, e.g. poly(butylene terephthalate) and poly(butylene succinate), the stability of β phase in TPI is high that can be long-lived.The strain rate dependence of α-β transition hinders the determination of critical stress for the transition. It further indicates that the local stress within the sample is more heterogeneous at higher strain rates.     

β‐Peptidic Secondary Structures Fortified and Enforced by Zn2+ Complexation – On the Way to β‐Peptidic Zinc Fingers?

The correlation between β²‐, β³‐, and β^2,3‐amino acid‐residue configuration and stability of helix and hairpin‐turn secondary structures of peptides consisting of homologated proteinogenic amino acids is analyzed (Figs. 1–3). To test the power of Zn²⁺ ions in fortifying and/or enforcing secondary structures of β‐peptides, a β‐decapeptide, 1 , four β‐octapeptides, 2 – 5 , and a β‐hexadecapeptide, 10 , have been devised and synthesized. The design was such that the peptides would a) fold to a 14‐helix ( 1 and 3 ) or a hairpin turn ( 2 and 4 ), or form neither of these two secondary structures (i.e., 5 ), and b) carry the side chains of cysteine and histidine in positions, which will allow Zn²⁺ ions to use their extraordinary affinity for RS^? and the imidazole N‐atoms for stabilizing or destabilizing the intrinsic secondary structures of the peptides. The β‐hexadecapeptide 10 was designed to a) fold to a turn, to which a 14‐helical structure is attached through a β‐dipeptide spacer, and b) contain two cysteine and two histidine side chains for Zn complexation, in order to possibly mimic a Zn‐finger motif. While CD spectra (Figs. 6–8 and 17) and ESI mass spectra (Figs. 9 and 18) are compatible with the expected effects of Zn²⁺ ions in all cases, it was shown by detailed NMR analyses of three of the peptides, i.e., 2, 3, 5 , in the absence and presence of ZnCl₂, that i) β‐peptide 2 forms a hairpin turn in H₂O, even without Zn complexation to the terminal β³hHis and β³hCys side chains (Fig. 11), ii) β‐peptide 3 , which is present as a 14‐helix in MeOH, is forced to a hairpin‐turn structure by Zn complexation in H₂O (Fig. 12), and iii) β‐peptide 5 is poorly ordered in CD₃OH (Fig. 13) and in H₂O (Fig. 14), with far‐remote β³hCys and β³hHis residues, and has a distorted turn structure in the presence of Zn²⁺ ions in H₂O, with proximate terminal Cys and His side chains (Fig. 15).     

环糊精与两种有机物的包合物的不同光解特性

The effectiveness of the solubilization and photodegradation of β-cyclodextrin （β-CD） and hydroxypropyl-β- cyclodextrin （HPCD） on two hydrophobic organic compounds （HOC） of methyl parathion and pentachlorophenol was investigated. The results indicate that the solubilization or photodegradation of two HOC were influenced by complexing with β-CD or HPCD. The solubility of pentachlorophenol （PCP） was increased linearly with β-CD concentration. The solubility of methyl parathion （MPT） was increased with the increase of β-CD concentration initially, however, as the β-CD concentration was enhanced above 3 g/L, the solubility was decreased with increase of β-CD concentration. The solubilities of two HOC were increased linearly with the increase of HPCD concentration. Although the photodegradation of MPT was improved, the photodegradation of PCP was restrained by complexation of HOC with β-CD or HPCD. In a word, the effectiveness of photodegradation or solubilization of HPCD was more significant than that of β-CD. One potential application of such a method was the in situ remediation of hydrophobic organic pollutants in contaminated soil and groundwater or industrial waste streams.     

(S)-β3-Homolysine- and (S)-β3-Homoserine-Containing β-Peptides: CD Spectra in Aqueous Solution

For further structural studies and for physiological investigations of β-peptides, it is necessary to have H₂O-soluble derivatives. Thus, we have prepared β-hexa-, β-hepta-, and β-nonapeptides ( 1 – 6 ) with two, three, and seven side chains of lysine and serine. To detect possible π-π interactions, we also included the β-amino acid β²-HHop, resulting from homologation of so-called homophenylalanine (Hop) ( 5 and 6 ). The Fmoc-β²- and β³-amino-acid derivatives ( 11 – 14 and 19 ), and the corresponding β-peptides were prepared by methods previously described (solid-phase peptide coupling; HPLC-pure samples, Fig. 1). Circular-dichroism spectra (Fig. 2) indicate the presence of less pronounced secondary structures (especially of the lysine analogues with multiple positive charge) in H₂O as compared to MeOH. The β³-heptapeptide ( 3 ) with two serine side chains is well soluble in H₂O and exhibits the CD pattern typical of the 3₁-helical structure.     

Sesquiterpenoids from the Aerial Parts of Inula japonica

Fourteen sesquiterpenoids with an eudesmane C‐atom skeleton, including four new ones, (1β,5α,7β,8β,11β)‐5‐hydroperoxy‐1‐hydroxyeudesm‐4(15)‐eno‐12,8‐lactone ( 1 ), (1β,5α,7β,8β)‐8‐(acetyloxy)‐5‐hydroperoxy‐1‐hydroxycostic acid methyl ester ( 12 ), and a mixture of (1β,3β,4β,7β,8β)‐1,3‐dihydroxyeudesma‐5,11(13)‐dieno‐12,8‐lactone ( 7 ) and (1β,3β,4β,7β,8β,11β)‐1,3‐dihydroxyeudesm‐5‐eno‐12,8‐lactone ( 8 ), were isolated from the aerial parts of Inula japonica (Asteraceae). Their structures were determined by extensive spectroscopic methods, and those of 7 and 12 confirmed by means of single‐crystal X‐ray diffraction analysis.