Atmospheric pressure laser desorption/ionization on porous silicon

A recently developed commercial atmospheric pressure matrix-assisted laser desorption/ionization (AP-MALDI) source (MassTech, Inc.) was modified to adopt commercially available DIOS plates (Mass Consortium Corp.) for the studies of laser desorption from the surface of porous silicon under atmospheric pressure conditions. The feasibility of atmospheric pressure laser desorption/ionization from the surface of porous silicon (AP-DIOS) was demonstrated. The advantages of this new AP-DIOS technique include reasonably good sensitivity (subpicomole range for standard peptide mixtures), simplicity of sample preparation, uniformity of target spots and the absence of matrix peaks in the spectra. The AP-DIOS source was interfaced with a commercial ion trap (LCQ Classic, Thermo Finnigan) which additionally provides a unique MS(n) capability. The AP-DIOS spectrum of 250 fmol of unseparated tryptic digest of bovine serum albumin (BSA) was compared with that of AP-MALDI for the same compound. AP-DIOS offers significantly better coverage for the digest components in the mass range 200-1000 Da. The combined data of both techniques enabled us to nearly double the number of matched peaks in BSA digest analysis compared with AP-DIOS or AP-MALDI analysis separately.     

Laser desorption/ionization mass spectrometry on porous silicon for metabolome analyses: influence of surface oxidation

Laser desorption/ionization mass spectrometry (LDI-MS) on porous silicon is a promising analytical strategy for the rapid detection of metabolites in biological matrices. We show that both oxidized and unoxidized porous silicon surfaces are useful in detecting protonated/deprotonated molecules from compounds when analyzed in mixtures. We demonstrate the feasibility of using this technique for the simultaneous detection of multiple analytes using a synthetic cocktail of 30 compounds commonly associated with prokaryotic and eukaryotic primary metabolism. The predominantly detected species were the protonated molecules or their sodium/potassium adducts in the positive-ion mode and the deprotonated molecules in the negative-ion mode, as opposed to fragments or other adducts. Surface oxidation appears to influence mass spectral responses; in particular, in the mixture we studied, the signal intensities of the hydrophobic amino acids were noticeably reduced. We show that whilst quantitative changes in individual analytes can be detected, ion suppression effects interfere when analyte levels are altered significantly. However, the response of most analytes was relatively unaffected by changes in the concentration of one of the analytes, so long as it was not allowed to dominate the mixture, which may limit the dynamic range of this approach. The differences in the response of the analytes when analyzed in mixtures could not be accounted for by considering their gas-phase and aqueous basicities alone. The implications of these findings in using the technique for metabolome analyses are discussed.     

Surface self-diffusion of organic molecules adsorbed in porous silicon

The pulsed field gradient nuclear magnetic resonance method has been employed to probe self-diffusion of organic guest molecules adsorbed in porous silicon with a 3.6 nm pore size. The molecular self-diffusion coefficient and intrapore adsorption were simultaneously measured as a function of the external vapor pressure. The latter was varied in a broad range to provide pore loading from less than monolayer surface coverage to full pore saturation. The measured diffusivities are found to be well-correlated with the adsorption isotherms. At low molecular concentrations in the pores, corresponding to surface coverages of less than one monolayer, the self-diffusion coefficient strongly increases with increasing concentration. This observation is attributed to the occurrence of activated diffusion on a heterogeneous surface. Additional experiments in a broad temperature range and using binary mixtures confirm this hypothesis.     

Oxidation of ferrocene derivatives in desorption/lonization on porous silicon.

In matrix-assisted laser desorption/ionization (MALDI), the true molecular structures of some analytes are not represented by the observed ions due to a redox reaction. In earlier reports, electron transfer from analyte to chemical matrix has been proposed for the oxidation of ferrocene derivatives in MALDI. To address such a redox phenomenon in laser desorption/ionization processes, two ferrocene derivatives, FcCH2CH2Fc and FcCH2NMe2 [Fc:(CsHs)Fe(CsH4)], were analyzed by a matrix-free method, desorption/ionization on porous silicon (DIOS). The oxidized species, Fc+CH2NMe2 and FcCH2CH2Fc+, were detected in the DIOS mass spectra. The results suggested that electron transfer from the analytes to the sample target occurs during the ionization process.     

Reduction of organic dyes in matrix-assisted laser desorption/ionization and desorption/ionization on porous silicon

Reduction of analytes in matrix-assisted laser desorption/ionization (MALDI) often obscures the actual determination of molecular structure. To address the redox reactions in laser desorption/ionization processes, the organic dyes Methylene Blue, Janus Green B, Crystal Violet and Rhodamine B were analyzed by MALDI or by desorption/ionization on porous silicon (DIOS). Susceptibility to reduction in MALDI was dependent on both the reduction potentials of analytes and the molar ratio of analyte to matrix molecules. Addition of Cu(II) ions as an electron scavenger suppressed the reduction of Methylene Blue in MALDI. The results suggested that electron transfer to analytes from the sample target and/or from the matrix contributed to the reduction. In DIOS, the reductions of organic dyes were more prominent than in MALDI, and were not prevented by Cu(II) ion doping, probably due to direct contact of the analytes with silicon which had little electric resistance.     

TOF-SIMS and FT-IR investigations of surface modified silicon wafers — porous silicon

Surface modification of silicon wafers by anodic etching in hydrofluoric acid results in the formation of porous silicon layers consisting of nanocrystallites covered with SiH bonds. A combination of high resolution Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) and Fourier Transform Infrared Spectroscopy (FT-IR) was used to study the surface chemistry of this new material.     

High surface area carbon aerogels as porous substrates for direct growth of carbon nanotubes

Novel carbon composites are fabricated through catalyzed CVD growth of carbon nanotubes directly on the inner surfaces of monolithic carbon aerogel (CA) substrates. Uniform CNT yield is obtained throughout the internal pore volume of CA monoliths with macroscopic dimensions. These composites possess large surface areas (>1000 m(2) g(-1)) and exhibit enhanced electrical conductivity following CNT growth.     

Local modification of the silicon surface with protein molecules

Adsorption of bovine serum albumin, horse radish peroxidase, and green fluorescent protein on the hydrophilic silicon surface was studied. The possibility of preparing microstructured one-, two-, and three-component films on the solid surface by combining the methods of microcontact printing and self-arrangement of proteins from solution was demonstrated.     

Affinity mass spectrometry from a tailored porous silicon surface

The development of chemically stable porous silicon (pSi) materials for DIOS (Desorption/Ionization on Silicon) mass spectrometry, covalent linkers cleaved in the DIOS laser pulse, and efficient methods for bond formation to immobilized species, allows for on-chip affinity purification and mass detection.     

High surface area silicon carbide from rice husk: A support material for catalysts

Ultrafine -SiC with high surface area (150 m² g^–1) has been synthesized by inflight processing of charred rice husk in a r.f. plasma reactor operating at atmospheric pressure. The plasma-synthesized particles were doped with platinum (1%) and tested as a catalytic support material. The catalyst (1% Pt doped -SiC) showed 100% conversion of CO to CO₂ at a temperature as low as 175°C.     

Preparation of porous n-type silicon sample plates for desorption/ionization on silicon mass spectrometry (DIOS-MS)

This study focuses on porous silicon (pSi) fabrication methods and properties for desorption ionization on silicon mass spectrometry (DIOS-MS). PSi was prepared using electrochemical etching of n-type silicon in HF-ethanol solution. Porous areas were defined by a double-sided illumination arrangement: front-side porous areas were masked by a stencil mask, eliminating the need for standard photolithography, and backside illumination was used for the backside ohmic contact. Backside illumination improved the uniformity of the porosified areas. Porosification conditions, surface derivatizations and storage conditions were explored to optimize pSi area, pore size and pore depth. Chemical derivatization of the pSi surfaces improved the DIOS-MS performance providing better ionization efficiency and signal stability with lower laser energy. Droplet spreading and drying patterns on pSi were also examined. Pore sizes of 50-200 nm were found to be optimal for droplet evaporation and pore filling with the sample liquid, as measured by DIOS efficiency. With DIOS, significantly better detection sensitivity was obtained (e.g. 150 fmol for midazolam) than with desorption ionization from a standard MALDI steel plate without matrix addition (30 pmol for midazolam). Also the noise that disturbs the detection of low-molecular weight compounds at m/z < 500 with MALDI could be clearly reduced with DIOS. Low background MS spectra and good detection sensitivity at the 100-150 fmol level for pharmaceutical compounds were achieved with DIOS-MS.     

Fingerprinting of 3, 4-methylenedioxymethamphetamine markers by desorption/ionization on porous silicon

Desorption/ionization on porous silicon (DIOS) is a method which extends the application range of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This technique eliminates matrix background in the low mass range; DIOS is especially advantageous in research on small organic molecules and their metabolites in biological samples. DIOS mass spectrometry was applied for 3, 4-methylenedioxymethamphetamine, (MDMA, Ecstasy) impurities identification. Trace components profiling enables the identification of by-products characteristics for the synthesis route of MDMA. Ecstasy, a synthetic psychoactive drug, is highly popular among young people, and often used as a recreational drug, most commonly used during disco parties. MDMA enhances feeling of euphoria by increasing the level of neurotransmitters such as serotonin, dopamine and norepinephrine, and causes acute behavioral and psychological effects. MDMA is almost exclusively produced illegally, primarily in Western Europe. The new method for MDMA impurities profiling has been developed to trace the origin of MDMA pills. For comparison and classification of the impurity profiles, the principal components analysis was used.     

Chemically modified porous silicon for laser desorption/ionization mass spectrometry of ionic dyes

Desorption/ionization on silicon (DIOS) mass spectra of model ionic dyes methylene blue (MB⁺Cl^?) and methyl orange (Na⁺MO^?) were studied using p⁺ type‐derived porous silicon (PS) free layers. As‐prepared PS (PS‐H), the PS thermally oxidized at 300 °C (PS‐OX), PS with chemically grafted cation‐exchanging alkylsulfonic acid (PS‐SO₃H) and anion‐exchanging propyl‐octadecyldimethylammonium chloride (PS‐ODMA⁺Cl^?) groups was tested as ionization platforms. Two mechanisms of the methylene blue desorption/ionization were found: (1) the formation of [MB + H]^+? ion due to the reduction/protonation of MB⁺, which is predominant for PS‐H and PS‐OX platforms and (2) direct thermal desorption of the MB⁺ cation, prevailing for PS‐SO₃H. The fragmentation of the cation is significantly suppressed in the latter case. The samples of PS‐SO₃H and PS‐ODMA⁺ Cl^? efficiently adsorb the dyes of the opposite charge from their solutions via the ion‐exchange. Consequent DIOS MS studies allow to detect only low fragmented ions (MB⁺ and MO^?, respectively), demonstrating the potential of the ion‐exchange adsorption combined with DIOS MS for the analysis of ionic organic compounds in solutions. Copyright © 2009 John Wiley & Sons, Ltd.     

Laser-induced thermal desorption of atoms and molecules physisorbed onto a metal surface

Laser-induced thermal desorption (LID) of multilayers of Xe, Ar and O₂ and of monolayers of O₂ and CO physisorbed onto polycrystalline copper have been investigated. All species are desorbed with Boltzmann distributions corresponding to temperatures below that of the surface. Results support the contention that subthermal velocity distributions result in LID experimens because the desorption process on nanosecond timescales is adiabatic, or near adiabatic. Allowing multilayers to form effectively reduces the desorption rate so that molecules desorb at higher temperatures relative to monolayers, though still below the final. temperature of the surface.     

Atomic and electronic structure of the surface of porous silicon layers

Atomic and electronic structure of the surface layers of porous silicon was studied by the methods of the near fine structure spectroscopy at the edge of X-ray absorption and ultrasoft X-ray emission spectroscopy. The thickness of the oxide layer and the degree of distortion of silicon-oxygen tetrahedra in this layer were estimated. The thickness of the surface oxide layer on the amorphous layer covering the nanocrystals of porous silicon that was kept during one year is several times greater than the thickness of the natural oxide in the single crystal silicon wafers. Distortion of the silicon-oxygen tetrahedron, the basic structural units of the silicon oxide, is accompanied by elongation of Si-O bonds and an increase in the Si-O-Si bond angles.     

Thermal stability of high surface area silicon carbide materials

The synthesis of mesoporous silicon carbide by chemical vapor infiltration of dimethyl dichlorosilane into mesoporous silica SBA-15 and subsequent dissolution of the silica matrix with HF was investigated. The influence of the synthesis parameters of the composite material (SiC/SBA-15) on the final product (mesoporous SiC) was determined. Depending on the preparation conditions, materials with specific surface areas from 410 to 830 m² g⁻¹ and pore sizes between 2 and 10 nm with high mesopore volume (0.31-0.96 cm³ g⁻¹) were prepared. Additionally, the thermal stability of mesoporous silicon carbide at 1573 K in an inert atmosphere (argon) was investigated, and compared to that of SBA-15 and ordered mesoporous carbon (CMK-1). Mesoporous SiC has a much higher thermal textural stability as compared to SBA-15, but a lower stability than ordered mesoporous carbon CMK-1.     

High surface density immobilization of oligonucleotide on silicon

Oligonucleotide (11-mer) molecules are immobilized on silicon in high surface population using either a permanent thioether bond or a chemo-selectively reversible disulfide bond to the surface thiol functionality. Substrate hydroxy groups are first silanized with an 11 carbon trichlorosilane containing a terminal, protected thiol moiety. Oligonucleotide modified with a tether possessing a terminal thiol group is further derivatized with a water-soluble, halobenzylic bifunctional reagent, which allows the complete conjugate to be attached to the surface through a permanent thioether bond. Alternatively, the oligonucleotide-tether complex can be combined with a pyridyldisulfide compound, which, in turn, facilitates the formation of a reversible disulfide bond with surface thiol. The amount of immobilized oligonucleotide was determined by radiochemical labeling with 32P. Additional verification of surface amounts was obtained from X-ray photoelectron spectroscopic analysis of substrates. The results of the immobilization protocols are compared with the oligonucleotide surface population achieved through the conventional silanizing agent, mercaptopropyltrimethoxysilane. Finally, a preliminary confirmation of duplex formation of a TTU-attached 25-mer with its complementary strand is outlined.     

Matrix-assisted laser desorption/ionization mass spectrometry using porous silicon and silica gel as matrix

Porous silicon powder and silica gel particles have been applied as inorganic matrices for the analysis of small molecules in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOFMS). In contrast to conventional MALDI-TOFMS, the signal interference of low-molecular analytes by the matrix has been eliminated. Almost no fragmentations of the analytes were observed. Effects of various factors, such as the particle and pore size, the suspending solution, and sample preparation procedures, on the intensity of mass spectra have been investigated. The pore structure of the inorganic matrix and penetration of the analytes into the pores must be optimized for effective desorption and ionization of the analytes. Matrices (DHB and HCCA) were covalently bound to silica gel for improvement of spectrum intensity. Copyright © 2001 John Wiley & Sons, Ltd.     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Cavitand-functionalized porous silicon as an active surface for organophosphorus vapor detection

This paper reports on the preparation of a porous silicon-based material covalently functionalized with cavitand receptors suited for the detection of organophosphorus vapors. Two different isomeric cavitands, both containing one acid group at the upper rim, specifically designed for covalent anchoring on silicon, were grafted on H-terminated porous silicon (PSi) by thermal hydrosilylation. The covalently functionalized surfaces and their complexation properties were characterized by combining different analytical techniques, namely X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy analysis coupled with thermal desorption experiments. Complexation experiments were performed by exposing both active surfaces and a control surface consisting of PSi functionalized with a structurally similar but inactive methylene-bridged cavitand (MeCav) to dimethyl methylphosphonate (DMMP) vapors. Comparison between active and inactive surfaces demonstrated the recognition properties of the new surfaces. Finally, the nature of the involved interactions, the energetic differences between active and inactive surfaces toward DMMP complexation, and the comparison with a true nerve gas agent (sarin) were studied by DFT modeling. The results revealed the successful grafting reaction, the specific host-guest interactions of the PSi-bonded receptors, and the reversibility of the guest complexation.