Analysis of polypropyleneglycols using electrospray ionization mass spectrometry. Effects of cationizing agents on the mass spectra

In electrospray ionization mass spectrometry (ESI-MS) of polypropyleneglycol (PPG), effects of cationizing agents were examined. When NaI was used as a cationizing agent, the distribution of multiply-charged ions in the spectra was greatly affected by the ratio of cationizing agent and PPG. However, the distribution was not affected by the use of CH(3)COONH(4). With an increase of cone voltage, fragmentation occurred by in-source collision-induced dissociation (CID) when CH(3)COONH(4) was used. On the contrary, no decomposition of the PPG backbone was observed with NaI. Instead, the intensity of the lower-charged ions, whose mass-to-charge (m/z) ratios are larger, increased because of the elimination of Na(+) with increase of cone voltage. Under optimum conditions for ESI-MS analysis, PPGs that have different molecular weights, different initiators or end groups were easily and accurately characterized. A tandem mass spectrometry (MS/MS) study of NH(4)(+) adduct ions of PPG indicated that a vinyl-terminated linear structure is formed at the end group during the fragmentation.     

The use of desorption/ionization on porous silicon mass spectrometry for the detection of negative ions for fatty acids

The study of low molecular weight compounds by matrix-assisted laser desorption/ionization (MALDI) is difficult because of the presence of ions originating from the matrix in the low-m/z range. In order to resolve these problems, new matrix-free approaches were developed based on laser desorption/ionization from the surface of various materials such as graphite and porous silicon. Our work involves the use of 'desorption ionization on porous silicon mass spectrometry' (DIOS-MS) in the negative ion mode to study fatty acid compounds. The potential of the DIOS-MS technique is shown and an insight into the ionization mechanism provided.     

Preparation of porous n-type silicon sample plates for desorption/ionization on silicon mass spectrometry (DIOS-MS)

This study focuses on porous silicon (pSi) fabrication methods and properties for desorption ionization on silicon mass spectrometry (DIOS-MS). PSi was prepared using electrochemical etching of n-type silicon in HF-ethanol solution. Porous areas were defined by a double-sided illumination arrangement: front-side porous areas were masked by a stencil mask, eliminating the need for standard photolithography, and backside illumination was used for the backside ohmic contact. Backside illumination improved the uniformity of the porosified areas. Porosification conditions, surface derivatizations and storage conditions were explored to optimize pSi area, pore size and pore depth. Chemical derivatization of the pSi surfaces improved the DIOS-MS performance providing better ionization efficiency and signal stability with lower laser energy. Droplet spreading and drying patterns on pSi were also examined. Pore sizes of 50-200 nm were found to be optimal for droplet evaporation and pore filling with the sample liquid, as measured by DIOS efficiency. With DIOS, significantly better detection sensitivity was obtained (e.g. 150 fmol for midazolam) than with desorption ionization from a standard MALDI steel plate without matrix addition (30 pmol for midazolam). Also the noise that disturbs the detection of low-molecular weight compounds at m/z < 500 with MALDI could be clearly reduced with DIOS. Low background MS spectra and good detection sensitivity at the 100-150 fmol level for pharmaceutical compounds were achieved with DIOS-MS.     

Analysis of dammar resin with MALDI‐FT‐ICR‐MS and APCI‐FT‐ICR‐MS

Comprehensive analysis of high‐resolution mass spectra of aged natural dammar resin obtained with Fourier transform ion cyclotron resonance mass spectrometer (FT‐ICR‐MS) using matrix‐assisted laser desorption/ionization (MALDI) and atmospheric pressure chemical ionization (APCI) is presented. Dammar resin is one of the most important components of painting varnishes. Dammar resin is a terpenoid resin (dominated by triterpenoids) with intrinsically very complex composition. This complexity further increases with aging. Ten different solvents and two‐component solvent mixtures were tested for sample preparation. The most suitable solvent mixtures for the MALDI‐FT‐ICR‐MS analysis were dichloromethane‐acetone and dichloromethane‐ethanol. The obtained MALDI‐FTMS mass spectrum contains nine clusters of peaks in the m/z range of 420–2200, and the obtained APCI‐FTMS mass spectrum contains three clusters of peaks in the m/z range of 380–910. The peaks in the clusters correspond to the oxygenated derivatives of terpenoids differing by the number of C₁₅H₂₄ units. The clusters, in turn, are composed of subclusters differing by the number of oxygen atoms in the molecules. Thorough analysis and identification of the components (or groups of components) by their accurate m/z ratios was carried out, and molecular formulas (elemental compositions) of all major peaks in the MALDI‐FTMS and APCI‐FTMS spectra were identified (and groups of possible isomeric compounds were proposed). In the MALDI‐FTMS and APCI‐FTMS mass spectrum, besides the oxidized C₃₀, triterpenoids also peaks corresponding to C₂₉ and C₃₁ derivatives of triterpenoids (demethylated and methylated, correspondingly) were detected. MALDI and APCI are complementary ionization sources for the analysis of natural dammar resin. In the MALDI source, preferably polar (extensively oxidized) components of the resin are ionized (mostly as Na⁺ adducts), whereas in the APCI source, preferably nonpolar (hydrocarbon and slightly oxidized) compounds are ionized (by protonation). Either of the two ionization methods, when used alone, gives an incomplete picture of the dammar resin composition. Copyright © 2012 John Wiley & Sons, Ltd.     

Laser desorption/ionization on porous silicon mass spectrometry for accurately determining the molecular weight distribution of polymers evaluated using a certified polystyrene standard.

Desorption/ionization on porous silicon-mass spectrometry (DIOS-MS) is a novel soft ionization MS technique that does not require any matrix reagent, ideally resulting in fewer obstructive peaks in the lower mass region. In this study, the etching conditions of porous silicon spots as an ionization platform of DIOS-MS were investigated for determining the molecular weight distribution (MWD) of polymers. To evaluate the accuracy of DIOS mass spectra observed using porous silicon spots prepared under various etching conditions, a certified polystyrene (PS) standard sample with an average molecular weight of ca. 2400 was used as a model sample. By optimizing the etching conditions, the MWD of the PS sample could be accurately observed by DIOS-MS using both p-type and n-type porous silicon spots. Especially, in the case of a suitable n-type spot, an accurate peak distribution with very fewer obstructive background peaks could be observed using the minimum laser power, comparable to the conventional matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS).     

2,5‐Dihydroxybenzoic acid solution in MALDI‐MS: ageing and use for mass calibration

2,5‐Dihydroxybenzoic acid (DHB) is one of the most widely used and studied matrix compounds in matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry. However, the influence of ageing of the DHB solution on the MALDI mass spectra has not been yet systematically studied. In this work, the possible changes occurring in the acidified acetonitrile/water solution of the MALDI matrix compound DHB during 1‐year usage period have been monitored with MALDI‐Fourier transform ion cyclotron resonance mass spectrometer (MALDI‐FT‐ICR‐MS) and attenuated total reflectance Fourier transform infrared (ATR‐FT‐IR) spectroscopy. No significant ageing products have been detected. The ability of the aged DHB solution to act as a MALDI matrix was tested with two materials widely used in art and conservation – bone glue (a proteinaceous material) and shellac resin (a resinous material) – and good results were obtained. A number of peaks in the mass spectra measured from the DHB solution were identified, which can be used for internal calibration of the mass axis. Copyright © 2014 John Wiley & Sons, Ltd.     

MALDI-TOF mass spectrometry of a combinatorial peptide library: effect of matrix composition on signal suppression

The effect of matrix composition on signal suppression caused by a dominant compound under MALDI ionization was studied using the combinatorial TQTXT pentapeptide library as a model system. The peptide library is composed of 19 components with all proteinogenic amino acids except cysteine in position X. From these compounds, only the Arg peptide (TQTRT) was detected with sufficient intensity in the MALDI-TOF mass spectrum under typical MALDI conditions (CCA matrix). The analysis of a set of compounds utilized as different matrix components, additives and a cationizing agent revealed that the composition of the matrix is a critical point in signal suppression. Highly improved ion yields were achieved by using a CCA/DHB mixture as a matrix. The addition of K(+) as a cationizing agent to the CCA matrix resulted in MALDI-TOF mass spectra with relative ion intensities very similar to those obtained by electrospray ionization.     

Hydrazide and hydrazine reagents as reactive matrices for MALDI‐MS to detect gaseous aldehydes

The reagents 19 hydrazide and 14 hydrazine were examined to function as reactive matrices for matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) to detect gaseous aldehydes. Among them, two hydrazide (2‐hydroxybenzohydrazide and 3‐hydroxy‐2‐naphthoic acid hydrazide) and two hydrazine reagents [2‐hydrazinoquinoline and 2,4‐dinitrophenylhydrazine (DNPH)] were found to react efficiently with carbonyl groups of gaseous aldehydes (formaldehyde, acetaldehyde and propionaldehyde); these are the main factors for sick building syndrome and operate as reactive matrices for MALDI‐MS. Results from accurate mass measurements by JMS‐S3000 Spiral‐TOF suggested that protonated ion peaks corresponding to [M + H]⁺ from the resulting derivatives were observed in all cases with the gaseous aldehydes in an incubation, time‐dependent manner. The two hydrazide and two hydrazine reagents all possessed absorbances at 337 nm (wavelength of MALDI nitrogen laser), with, significant electrical conductivity of the matrix crystal and functional groups, such as hydroxy group and amino group, being important for desorption/ionization efficiency in MALDI‐MS. To our knowledge, this is the first report that gaseous molecules could be derivatized and detected directly in a single step by MALDI‐MS using novel reactive matrices that were derivatizing agents with the ability to enhance desorption/ionization efficiency. Copyright © 2014 John Wiley & Sons, Ltd.     

Evaluation of a new matrix-free laser desorption/ionization method through statistic studies: comparison of the DIAMS (desorption/ionization on self-assembled monolayer surface) method with the MALDI and TGFA-LDI techniques

This work demonstrates that the desorption/ionization on self-assembled monolayer surface (DIAMS) mass spectrometry, a recent matrix-free laser desorption/ionization (LDI) method based on an organic target plate, is as statistically repeatable and reproducible as matrix assisted laser desorption ionization (MALDI) and thin gold film-assisted laser desorption/ionization (TGFA-LDI) mass spectrometries. On lipophilic DIAMS of target plates with a mixture of glycerides, repeatability/reproducibility has been estimated at 15 and 30% and the relative detection limit has been evaluated at 0.3 and 3 pmol, with and without NaI respectively. Salicylic acid and its d(6)-isomer analysis confirm the applicability of the DIAMS method in the detection of compounds of low molecular weight.     

Direct tissue analysis using matrix-assisted laser desorption/ionization mass spectrometry: practical aspects of sample preparation

Practical guidelines for the preparation of tissue sections for direct analysis by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry are presented. Techniques for proper sample handling including tissue storage, sectioning and mounting are described. Emphasis is placed on optimizing matrix parameters such as the type of matrix molecule used, matrix concentration, and solvent composition. Several different techniques for matrix application are illustrated. Optimal instrument parameters and the necessity for advanced data analysis approaches with regards to direct tissue analysis are also discussed.     

Quantitative analyses of fullerene and polycyclic aromatic hydrocarbon mixtures via solvent‐free matrix‐assisted laser desorption/ionization mass spectrometry

We explore the feasibility of reliable quantitative matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) analyses via solvent‐free sample preparation, as this procedure provides the unique convenience of being applicable also to insoluble samples. As quantitative MALDI measurements are even more complicated for species ionized by cation attachment, we investigated model systems, such as polycyclic aromatic hydrocarbons (PAHs) and fullerenes, which undergo photoionization and do not require additional cationizing salts. Our quantitative approach rests upon applying the standard‐addition method in MALDI for the quantitative characterization of binary mixtures. Two different systems are tested. Set 1 is composed of hexakis(dodecyl)hexabenzocoronene and hexakis(dodecyl)hexaphenylbenzene, which represent the product and precursor of a cyclodehydrogenation reaction, and Set 2 is a mixture of C60 and C70 fullerenes. In Set 1, severe anomalies could be detected due to a strong influence of the matrix/analyte ratio on the correlation between signal intensity and analyte amount. This can be related to the strong intermolecular interactions among the hexabenzocoronene (HBC) aromatic cores hampering the desorption step and to intermolecular charge transfers, which influence the ionization probability. Minor interferences to the quantitative MALDI characterization are encountered in the analysis of C60 and C70 fullerenes. The spherical shapes of C60 and C70 buckyballs prevent strong aggregation. Thus, no molecule‐dependent anomalies in their desorption‐photoionization behaviour are recognized. Copyright © 2008 John Wiley & Sons, Ltd.     

Method development for the analysis of resinous materials with MALDI‐FT‐ICR‐MS: novel internal standards and a new matrix material for negative ion mode

Matrix‐assisted laser desorption/ionization (MALDI) is a mass spectrometry (MS) ionization technique suitable for a wide variety of sample types including highly complex ones such as natural resinous materials. Coupled with Fourier transform ion cyclotron resonance (FT‐ICR) mass analyser, which provides mass spectra with high resolution and accuracy, the method gives a wealth of information about the composition of the sample. One of the key aspects in MALDI‐MS is the right choice of matrix compound. We have previously demonstrated that 2,5‐dihydroxybenzoic acid is suitable for the positive ion mode analysis of resinous samples. However, 2,5‐dihydroxybenzoic acid was found to be unsuitable for the analysis of these samples in the negative ion mode. The second problem addressed was the limited choice of calibration standards offering a flexible selection of m/z values under m/z 1000. This study presents a modified MALDI‐FT‐ICR‐MS method for the analysis of resinous materials, which incorporates a novel matrix compound, 2‐aminoacridine for the negative ion mode analysis and extends the selection of internal standards with m/z <1000 for both positive (15 different phosphazenium cations) and negative (anions of four fluorine‐rich sulpho‐compounds) ion mode. The novel internal calibration compounds and matrix material were tested for the analysis of various natural resins and real‐life varnish samples taken from cultural heritage objects. Copyright © 2017 John Wiley & Sons, Ltd.     

Solvent effect in polymer analysis by MALDI-TOF mass spectrometry

Solvent effect is one of the important factors in sample preparation which may affect matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra of synthetic polymers. MALDI imaging, a useful imaging tool for discovering biomarkers in tissues, is applied here for better comprehension of solvent effect in polymer analysis by MALDI-TOF mass spectrometry. Nylon-6 was chosen as a model polymer for the study of solvent effect. Its MALDI mass spectra in different solvents were performed. MALDI imaging analysis was performed for studying the incorporation of analytes into matrix crystals in different solvent combinations. Specifically, the colocalization of matrix and analyte was obtained through Pearson’s correlation (PC) coefficient analysis of their MALDI images. The results demonstrated that satisfactory spectra were obtained in higher PC value conditions. PC decreased along with an increase in the ratio of poor solvent, which suggested that we should minimize the poor solvent ratio to obtain better MALDI spectra.     

Laser desorption/ionization mass spectrometry on porous silica and alumina for peptide mass fingerprinting

We investigated a variant of desorption/ionization on porous silicon (DIOS) mass spectrometry utilizing an aqueous suspension of either porous silica gel or porous alumina (pore size of 60 and 90 A, respectively). Laser desorption/ionization (LDI) from samples directly deposited on a stainless steel surface without any inorganic substrates was also achieved. Synthetic peptides designed to cover large sequence diversity constituted our model compounds. Sample preparation, including material conditioning, peptide solubilization, and deposition protocol onto standard matrix-assisted laser desorption/ionization (MALDI) probe, as well as ionization source tuning were optimized to perform sensitive reproducible LDI analyses. The addition of either a cationizing agent or an alkali metal scavenger to the sample suspension allowed modification of the ionization output. Comparing hydrophilic silica gel to hydrophobic reversed-phase silica gel as well as increasing material pore size provided further insights into desorption/ionization processes. Furthermore, mixtures of peptides were analyzed to probe the spectral suppression phenomenon when no interfering organic matrix was present. The results gathered from synthetic peptide cocktails indicated that LDI mass spectrometry on silica gel or alumina constitutes a promising complementary method to MALDI in proteomics for peptide mass fingerprinting.     

Analysis of Human Blood Plasma by MALDI‐TOF MS—Evaluation of Critical Parameters

Abstract

Matrix‐assisted laser desorption and ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (MS) was used to evaluate the lipid composition of human blood plasma. The focus was on parameters affecting the spectral quality: The laser intensity had the highest impact and must be set as low as possible. Additionally, salt removal by lipid extraction led to an enhanced reproducibility. Surprisingly, the influence of storage time of a given plasma sample was only weak.

It will be shown that the lipid MALDI‐TOF mass spectra allow the differentiation of nutrition habits. The comparison between vegetarians and normal volunteers indicated a higher phosphatidylcholine to triacylglycerol and phosphatidylcholine to lysophosphatidylcholine ratio in the plasma of the vegetarians.     

Comparison of ionization behaviors of ring and linear carbohydrates in MALDI-TOFMS

Ionization efficiencies of cyclodextrins and their linear compounds in matrix-assisted laser desorption and ionisation (MALDI) analysis were compared, and differences in the ionization efficiencies of α- and β-cyclodextrins were also studied. The mass spectra showed a series of the [M+cation]⁺ ions but not the [M+H]⁺ ions. Alkali metal salts of Li⁺, Na⁺, K⁺, and Cs⁺ were used as the cationizing agents to enhance the ionization efficiency. Relative ion intensities of the ring compounds (α- and β-cyclodextrins) were much larger than those of the linear ones (maltohexaose and maltoheptaose), and the difference showed an increasing trend with the size of the alkali metal cation. β-Cyclodextrin had higher ionization efficiency than α-cyclodextrin and the difference increased by increasing the size of the alkali metal cation. It was also found that the ionization efficiency was affected by the counter anion of the salt. The higher ionization efficiencies of cyclodextrins were explained with the number of coordination sites and the binding energies.     

MALDI-TOF质谱表征聚芳醚酮环状低聚物及其组分分布

应用介质辅助激光解吸离子化飞行时间质谱(MALDI-TOFMS),以二羟基苯甲酸为介质、N₂(337nm)为激光源,对两种聚芳醚酮环状低聚物的结构进行了确认,研究了环状低聚物不同聚合度组分的分布规律,并且与GPC质量分析法作了比较,实验结果表明,MALDI-TQF质谱是分析环状低聚物的准确、快速的工具之一.     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

Solvent selection for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis of synthetic polymers employing solubility parameters

The principle relating to the selection of a proper matrix, cationization reagent, and solvent for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) of synthetic polymers is still a topic of research. In this work we focused on the selection of a suitable MALDI solvent. Polystyrene PS7600 and poly(ethylene glycol) PEG4820 were analyzed by MALDI‐TOF MS using various solvents which were selected based on the Hansen solubility parameter system. For polystyrene (PS), dithranol was used as the matrix and silver trifluoroacetate as the cationization reagent whereas, for poly(ethylene glycol) (PEG), the combination of 2,5‐dihydroxybenzoic acid and sodium trifluoroacetate was used for all experiments. When employing solvents which dissolve PS and PEG, reliable MALDI mass spectra were obtained while samples in non‐solvents (solvents which are not able to dissolve the polymer) failed to provide spectra. It seems that the solubility of the matrix and the cationization reagent are less important than the polymer solubility. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrospray and matrix-assisted laser desorption/ionization mass spectral characterization of linear single nylon-6 oligomers

Synthetic nylon-6 single molecular mass oligomers were studied by matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI) mass spectrometry. These oligomers, considered as model compounds for the study of nylon-6 polymers, gave good mass spectrometric results using both MALDI and ESI. In spite of the gentle nature of both techniques, the MALDI and ESI spectra showed evidence of end-group cleavage from the oligomer chains. MALDI-MS was found to give similar fragmentation patterns for all of the oligomer samples. An increase in doubly charged ion signals with increasing oligomer mass was observed in the ESI mass spectra, as was end-group fragmentation. Signals from oligomer clusters were observed in ESI-MS for the dimer, tetramer and hexamer, most likely due to non-covalent bonding among the low-mass oligomer molecules.