渣油加氢处理过程中Mo-V/Al_2O_3的催化性能及协同效应

采用孔饱和浸渍法制备了不同Mo/(Mo+V)原子比的Mo-V/Al2O3催化剂,运用拉曼光谱、H2程序升温还原和高分辨透射电镜对催化剂进行了表征,同时以萘为模型化合物,考察了催化剂的加氢活性;以科威特常渣为原料,考察了其加氢脱金属和脱硫活性.结果表明,在上述反应中,Mo与V具有协同作用.由于渣油中金属和硫的存在形态不同,并且V-Mo-S相和V-S相对于渣油加氢脱金属反应的催化作用要大于渣油加氢脱硫反应,因此与Ni-Mo/Al2O3催化剂相比,Mo-V/Al2O3催化剂的脱金属活性较高,而脱硫活性较低.     

Formation of CO(x)-free H2 and cup-stacked carbon nanotubes over nano-Ni dispersed single wall carbon nanohorns

Transitional metals (M) were dispersed on single-wall carbon nanohorns (M/SWCNHs, M = Fe, Co, Ni, Cu) by simple thermal treatment of the deposited metal nitrate without H(2) reduction. Nanometallic Ni particles on SWCNH were evidenced by high-resolution transmission electron microscopic observation and X-ray photoelectron spectroscopy. The nano-Ni dispersed on SWCNH showed the highest CH(4) decomposition activity; the activity of used transitional metals decreases in the order Ni ? Co > Fe ? Cu. On the other hand, the reaction rate over Ni/SWCNH was much larger than that over Ni/Al(2)O(3), and the former provided CO(x)-free H(2) and cup-stacked carbon nanotubes, while Ni/Al(2)O(3) produced CO(x) in addition to H(2). SWCNH was superior to Al(2)O(3) as the catalyst support of Ni for the CH(4) decomposition reaction.     

Layer-by-layer assembly and spontaneous flocculation of oppositely charged oxide and hydroxide nanosheets into inorganic sandwich layered materials

Exfoliated oxide nanosheets such as Ti0.91O2 and Ca2Nb3O10 and layered double hydroxide (LDH) nanosheets of Mg2/3Al1/3(OH)2 were restacked into inorganic sandwich layered materials. Sequential adsorption of these oppositely charged nanosheets from their colloidal suspensions yielded multilayer ultrathin films while their simple mixing produced lamellar flocculates. Eliminating carbonate ions from the reaction system was found to be essential for successfully achieving the sandwich structures. The flocculated materials as well as the films were characterized by atomic force microscopy (AFM), UV-visible absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and chemical analysis, which all supported the formation of the ordered sandwich structures. AFM observations revealed alternate dense tiling of LDH nanosheets and oxide nanosheets onto a substrate surface. UV-visible absorption spectra exhibited progressive enhancement of optical density due to oxide nanosheets as a function of deposition cycles, providing strong evidence for regular growth of multilayer films. The combinations of Mg2/3Al1/3(OH)2/Ti0.91O2 and Mg2/3Al1/3(OH)2/Ca2Nb3O10 produced XRD Bragg peaks having multilayer spacings of 1.2 and 2.0 nm, respectively. These basal spacing values are compatible with the sum of thickness of LDH nanosheets and corresponding oxide nanosheets. TEM images of flocculated samples displayed lamellar features with two different constituent layers appearing alternately.     

V2O3纳米粉末的固相反应合成(英)

Vanadium sesquioxide (V₂O₃) nanopowder was successfully prepared by the solid phase reaction of the mixture of vanadyl hydroxide (VO(OH)₂) and ammonium chloride (NH₄Cl) at 500 ℃. The as-obtained samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). V₂O₃ nanoparticles were well dispersed and displayed sphere-like particles with diameters in the range of 30～50 nm.     

In situ electron microscopy studies of the sintering of palladium nanoparticles on alumina during catalyst regeneration processes.

Sintering of a palladium catalyst supported on alumina (Al2O3) in an oxidizing environment was studied by in situ transmission electron microscopy (TEM). In the case of a fresh catalyst, sintering of Pd particles on an alumina surface in a 500 mTorr steam environment happened via traditional ripening or migration and coalescence mechanisms and was not significant unless heating above 500 degrees C. After the catalyst was used for the hydrogenation of alkynes, TEM coupled with convergent beam electron diffraction and electron energy loss spectroscopy analysis revealed that most of the Pd particles were lifted from the alumina surface by hydrocarbon buildup. This dramatically different morphology totally changed the sintering mechanism of Pd particles during the regeneration process. Catalytic gasification of hydrocarbon around these particles in an oxidizing environment allowed the Pd particles to move around and coalesce with each other at temperatures as low as 350 degrees C. For catalysts heating under 500 mTorr steam at 350 degrees C, steam stripped hydrocarbon catalytically at the beginning, but the reaction stopped after 4 h. Heating in air resulted in both catalytic and noncatalytic stripping of hydrocarbon.     

单晶二氧化钛纳米线的制备及其在柔性染料敏化太阳能电池中的应用

采用强碱水热法制备单晶二氧化钛纳米线(SCTNW),在高压高温和强碱作用下,二氧化钛颗粒的(010)晶面被NaOH溶液侵蚀,生成钛酸钠(Na2Ti4O9);经过酸洗后,生成钛酸水合物(H2Ti4O9·H2O),钛酸水合物之间通过氢键连接成线状;烧结失水后,最终形成SCTNW.通过透射电子显微镜(TEM)、选区电子衍射(SAED)、X射线能量散射谱(EDS)和X射线衍射(XRD)等手段进行表征和测试,分析了SCTNW的形成过程,探讨了水热时间对SCTNW形成的影响;将获得的SCTNW共混在二氧化钛纳米颗粒的胶体中,采用刮涂法在柔性钛箔上制备了染料敏化太阳能电池(DSSC)光阳极,通过扫描电子显微镜(SEM)、交流阻抗谱(EIS)、紫外-可见(UV-Vis)分光光度计和电池光电性能等表征和测试,探讨了SCTNW的共混量对柔性DSSC光电性能的影响.实验结果表明:当共混7.5%(w)的SCTNW时,所制备的柔性DSSC在100mW·cm-2模拟太阳光照下,光电转换效率达到6.48%.     

清洁及部分氧化的Ni_3Ti(0001)表面CO吸附的HREELS研究

用离子散射谱（ＩＳＳ）、俄歇电子能谱（ＡＥＳ）及低能电子衍射（ＬＥＥＤ）技术对Ｎｉ３Ｔｉ（０００１）表面结构与组成进行考察后，主要采用高分辨电子能量损失谱（ＨＲＥＥＬＳ），以ＣＯ为探针分子，研究了清洁及部分氧化的Ｎｉ３Ｔｉ（０００１）表面上Ｎｉ，Ｔｉ间的相互作用及对ＣＯ吸附态的影响．结果表明：（１）在最表层几乎完全为Ｎｉ的Ｎｉ３Ｔｉ（０００１）清洁规整表面上，ＣＯ没有发生解离；（２）次表层Ｔｉ原子与最表层Ｎｉ原子间的电子相互作用，使初始吸附的ＣＯ伸缩振动与Ｎｉ（１１１）相比向低频位移约６０ｃｍ－１；（３）适量ＣＯ暴露后，ＣＯ氧端与近邻Ｔｉ原子的成键作用产生了一种新的Ｎｉｘ－Ｃ－Ｏ－Ｔｉｙ物种．Ｎｉ３Ｔｉ（０００１）表面部分氧化后，上述（２）和（３）作用消失     

TEM-induced structural evolution in amorphous Fe oxide nanoparticles

Exposure to the high energy electron beam of a TEM changes the morphology of amorphous Fe oxide nanoparticles from solid spheres to hollow shells. Amorphous Fe oxide nanoparticles prepared via high-temperature methods using hexadecylamine and trioctylphosphine oxide surfactants were compared to crystalline gamma-Fe2O3 particles of similar size. Both sets of particles are fully characterized via SQUID magnetometry, X-ray powder diffraction, BET surface analysis, EPR spectroscopy, high-resolution transmission electron microscopy (TEM), and electron energy loss spectroscopy (EELS). Time-resolved TEM images reveal that the amorphous Fe oxide particles evolve from solid spheres into hollow shells in <2 min, whereas crystalline gamma-Fe2O3 are unaffected by the electron beam. The resulting nanocrystalline Fe oxide shells bear striking resemblance to core-shell nanocrystals, but are a result of a morphology change attributed to restructuring of particle voids and defects induced by quasi-melting in the TEM. These results thus imply that caution is necessary when using TEM to analyze nanoparticle core-shell and heterostructured nanoparticles.     

纳米V2O5／ZnO光催化剂对壬基酚聚氧乙烯醚降解的催化活性

采用氨浸法制备了不同V2O5含量的纳米V2O5/ZnO光催化剂,并用X射线衍射、比表面积测定、透射电镜、X射线光电子能谱和漫反射紫外-可见光谱测定了催化剂的晶型、比表面积、形貌尺寸、表面组成和光谱特征.以壬基酚聚氧乙烯醚(NPE-10)为模型污染物,分别在紫外光和可见光照射下考察了光催化剂的催化活性.结果表明,随着V2O5含量的增加,V2O5/ZnO的粒径逐渐减小,比表面积逐渐增大.与纳米ZnO样品相比,V2O5/ZnO中V2p的结合能减小,而Zn2p和O1s的结合能增大,V2O5/ZnO表面的羟基氧和吸附氧含量增加.n(V)/n(Zn)=2·5%的V2O5/ZnO光催化剂样品的催化活性最高(在紫外光和可见光照射3h后,NPE-10降解率分别约为79%和62%).     

Electron beam induced changes in transition metal oxides

Electron beam induced changes in maximal valence transition metal oxides V(2)O(5), M(o)O(3) and TiO(2) (anatase) were studied by means of electron energy-loss spectroscopy and electron diffraction in transmission electron microscopy. For V(2)O(5), the observed chemical shifts of the L-edge reveal the reduction of V(5+) to V(2+). The structure changes from orthorhombic V(2)O(5) to cubic VO. MoO(3) can be reduced to a phase with an oxidation state less than that in MoO(2). No notable structural or electronic change in TiO(2) (anatase) is observed. The different behaviours of the studied oxides under an electron beam are discussed with respect to bonding energy and lattice structure.     

Structure and Magnetic Properties of FeCo/Al2O3 Nanocomposites

The soft magnetic nanocomposites with equiatomic FeCo particles dispersed in Al2O3 matrix were synthesized via a sol-gel technique combined with H2 reduction method. The samples were characterized by X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The FeCo nanoparticles in all the samples have the typical bcc structure. With the decreasing of Al2O3 content, the mean grain size of FeCo in the nanocomposites and the saturation magnetization of the samples increase, while the coercivity of samples increases firstly and then decreases due to different magnetic mechanisms.     

X‐ray microanalysis in STEM of short‐term physicochemical reactions at bioactive glass particle/biological fluid interface. Determination of O/Si atomic ratios

Short‐term physicochemical reactions at the interface between bioactive glass particles and biological fluids are studied and we focus our attention on the measurements of O/Si atomic ratio. The studied bioactive glass is in the SiO₂? Na₂O? CaO? P₂O₅? K₂O? Al₂O₃? MgO system. The elemental analysis is performed at the submicrometre scale by scanning transmission electron microscopy associated with energy‐dispersive x‐ray spectroscopy (EDXS) and electron energy‐loss spectroscopy (EELS). We previously developed an EDXS quantification method based on the ratio method and taking into account local absorption corrections. In this way, we use EELS data to determine, by an iterative process, the local mass thickness, which is an essential parameter for correcting absorption in EDXS spectra. After different immersion times of bioactive glass particles in a simulated biological solution, results show the formation of different surface layers at the bioactive glass periphery. Before 1 day of immersion, we observe the presence of an already shown (Si,O,Al)‐rich layer at the periphery. In this paper, we demonstrate that a thin ‘electron dense’ (Si,O)‐layer is formed on top of the (Si,O,Al)‐layer. In this (Si,O)‐layer, depleted in aluminium, we point out an increase of oxygen weight concentration that can be interpreted by the presence of Si(OH)₄ groups, which permit the formation of a (Ca,P)‐layer. Aluminium plays a role in the glass solubility and may inhibit apatite nucleation. After the beginning of the (Ca,P)‐layer formation, the size of the ‘electron dense’ (Si,O)‐layer decreases and tends to disappear. After 2 days of immersion, the (Ca,P)‐layer grows in thickness and leads to apatite precipitation. Copyright © 2004 John Wiley & Sons, Ltd.     

Ti~(3+)自掺杂的纳米TiO_2的制备及其可见光催化性能

以TiH2为Ti源,H2O2为氧化剂,首先通过表面氧化得到不同状态的前驱体凝胶,然后采用后续水热处理制备Ti3+自掺杂的纳米Ti O2.考察了前驱体凝胶状态及水热处理时间对材料结构和性能的影响.利用X射线衍射、透射电子显微镜、X射线光电子能谱、电子顺磁共振波谱和紫外-可见漫反射光谱手段对样品进行表征.以次甲基蓝溶液为模拟废水评价样品的可见光催化降解性能.结果表明,与纯Ti O2相比,Ti3+的自掺杂使材料在可见光区有明显的吸收,并具有良好的可见光催化降解性能和循环使用性能.当采用黄色凝胶为前驱体时,在160°C下水热处理24 h所得样品在可见光下光催化降解次甲基蓝的反应速率常数(0.0439 min-1)是纯Ti O2的18.3倍.     

Characterization and reactivity of γ-Al_2O_3 supported Pd–Ni bimetallic nanocatalysts for selective hydrogenation of cyclopentadiene

Several g-Al2O3 supported Pd–Ni bimetallic nanocatalysts(Pd–Ni(x:y)/Al2O3; where x and y represent the mass ratio of Pd and Ni, respectively) were prepared by the impregnation method and used for selective hydrogenation of cyclopentadiene to cyclopentene. The Pd–Ni/Al2O3 samples were confirmed to generate Pd–Ni bimetallic nanoparticles by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and transmission electron microscopy(TEM). The catalytic activity was assessed in view of the effects of different mass ratios of Pd and Ni, temperature, pressure, etc. Among all the samples, the Pd–Ni(1:1)/Al2O3(PN-1:1) catalyst showed extremely high catalytic ability. The conversion of cyclopentadiene and selectivity for cyclopentene can be simultaneously more than 90%.     

喷雾热分解法制备的钛酸钡颗粒内钡钛元素分布

基于氯化钡和二氧化钛具有不同的溶解特性,采用溶剂萃取法分别对喷雾热分解法和喷雾水解反应法制备的钛酸钡前驱体干燥产物颗粒内钡和钛分布进行定性分析,从而间接钛酸钡颗粒内的钡和钛分布情况。实验结果表明,该法可快速而准确地分析组合分析组分偏析情况。     

Oxidation and carbidation of laser-ablated amorphized Ti particles in carbon monoxide

IR laser ablation of hexagonal titanium in vacuum leads to amorphization of ablated Ti particles and when carried out in gaseous carbon monoxide it proceeds as reactive ablation involving particles amorphization, oxidation and carbidation. The films deposited in vacuum and in the presence of CO were examined by Fourier transform infrared, Raman and X-ray photoelectron spectroscopy, X-ray and electron diffraction and electron microscopy. The Ti films become oxidized upon contact with air and the Ti/C/O films are composed of Ti–O, Ti–C and C–O bonds-containing structures with Ti in Ti²⁺–Ti⁴⁺ state and incorporating crystalline rutile and elemental carbon. The ablation in vacuum represents a new approach to amorphous titanium and it is judged that hot ablated Ti particles are modified by reactions with CO decomposition products into amorphous Ti oxycarbides which undergo rapid post-pulse amorphization.     

Effect of barium loading on the desulfation of Pt-BaO/Al2O3 studied by H2 TPRX, TEM, sulfur K-edge XANES, and in situ TR-XRD

Desulfation processes were investigated over sulfated Pt-BaO/Al2O3 with different barium loading (8 and 20 wt %) by using H2 temperature programmed reaction (TPRX), transmission electron microscope (TEM) with energy dispersive spectroscopy (EDS), sulfur K-edge X-ray absorption near-edge spectroscopy (XANES), and in situ time-resolved X-ray diffraction (TR-XRD) techniques. Both sulfated samples (8 and 20 wt %) form sulfate species (primarily BaSO4) as evidenced by S K-edge XANES and in situ TR-XRD. However, the desulfation behavior is strongly dependent on the barium loading. Sulfated Pt-BaO8/Al2O3, consisting predominantly of surface BaO/BaCO3 species, displays more facile desulfation by H2 at lower temperatures than sulfated Pt-BaO20/Al2O3, a material containing primarily bulk BaO/BaCO3 species. Therefore, after desulfation with H2 up to 1073 K, the amount of the remaining sulfur species on the former, mostly as BaS, is much less than that on the latter. This suggests that the initial morphology differences between the two samples play a crucial role in determining the extent of desulfation and the temperature at which it occurs. It is concluded that the removal of sulfur is significantly easier at lower barium loading. This finding can potentially be important in developing more sulfur resistant LNT catalyst systems.     

Influence of the precipitation agent in the deposition-precipitation on the formation and properties of Au nanoparticles supported on Al2O3

Au nanoparticles supported on Al2O3 were prepared by deposition-precipitation of HAuCl4 with different precipitation agents NaOH and urea. The samples were investigated by means of different characterization techniques such as X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and transmission electron microscopy (TEM). The results show that depending on the precipitation agent, the Au particles have a different Au-Au coordination number and size after calcination at 523 K. Whereas the use of NaOH leads to the formation of Au nanoparticles with a Au-Au coordination number of 6.7 and a mean diameter below 2 nm, those prepared with urea have a mean size of 3.1 nm. The Au-Au coordination number could be determined as 8.6. At the smaller particles obtained with NaOH, hints for Au-O interactions were found. For these particles TEM results advise a rather flat lenticular morphology. Different deposition mechanisms depending on the precipitation agent are discussed as the reason for the formation of nanoparticles with different shapes, sizes, and valence states.     

Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide

The formation process of titania based nanorods during hydrothermal synthesis starting from an amorphous TiO2.nH2O gel has been investigated. Sodium tri-titanate (Na2Ti3O7) particles with a rodlike morphology were prepared by a simple hydrothermal process in the presence of a concentrated NaOH aqueous solution. The ion exchange reaction of the synthesized Na2Ti3O7 nanorods with HCl under ultrasonic treatment promotes a complete sodium substitution and the formation of H2Ti3O7 nanorods. Low-temperature annealing of the as-produced nanorods of Na2Ti3O7 and H2Ti3O7 leads to a loss of the layered crystal structure and the formation of nanorods of condensed framework phases-sodium hexa-titanate (Na2Ti6O13) and metastable TiO2-B phases, respectively. These transformations proceed without a significant change in particle morphology. The nanostructures were investigated by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), and Raman spectroscopy. The structural defects of the synthesized nanorods were investigated by high-resolution electron microscopy. The presence of planar defects can be attributed to the exfoliation of the zigzag ribbon layers into two-dimensional titanates as well as to the condensation of the layers of TiO6 octahedra into three-dimensional frameworks.     

The Role of Precursor Concentration on the Characteristics of SiO2-CaO Films

Sol-gel films on Titanium Ti6Al4V alloys polished wafer were prepared from sono-sols obtained from tetraethylorthosilicate (TEOS) and hydrated calcium nitrate. Different precursor solutions were used by dilution of the starting mixture in ethanol. The resulting materials were characterised by different techniques: scanning electron microscopy, energy disperses spectroscopy and atomic force microscopy. These studies showed different texture and porosity properties depending on volume proportions of the sol and ethanol. Solutions with lower ethanol content gave a larger pore distribution and roughness.