Biosynthesis and Characterization of Pd and Pt Nanoparticles Using Piper betle L. Plant in a Photoreduction Method

An extremely rapid green approach that generates bulk quantities of nanocrystals of noble metals such as palladium (Pd) and platinum (Pt) nanoparticles (NPs) with a small sizes of 3.8 ± 0.2 and 2.1 ± 0.4 nm by using Piper betle L. (Piperaceae) leaf extract is described. The highly stable and monodispersed Pd and Pt NPs were obtained at 10 min of continuous sunlight exposure. The bio-reduced Pd and Pt NPs were further characterized by using UV–Visible spectroscopy, transmission electron microscopy, selected area electron diffraction, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and cyclic voltammetry measurements. The particles, although discrete, were predominately associated with the P. betle plant proteins, which makes them stable over long time periods. These synthesized biogenic Pd and Pt NPs were evaluated for their acute toxicity studies against aquatic organism, Daphnia magna.     

Molecular Design of Fluorocarbon Film Architecture by Pulsed Plasma Enhanced and Pyrolytic Chemical Vapor Deposition

Pulsed plasma enhanced chemical vapor deposition (pulsed PECVD) and pyrolytic chemical vapor deposition (pyrolyric CVD) of fluorocarbon films from hexafluoropropylene oxide (HFPO) have demonstrated the ability to molecularly design film architecture. Film structures ranging from highly amorphous crosslinked matrices to linear perfluoroalkyl chain crystallites can be established by reducing the modulation frequency of plasma discharge in plasma activated deposition and by eventually shifting mechanistically from an electrically activated to a thermally activated process. X-ray photoelectron spectroscopy (XPS) showed CF₂ content increasing from 39–65 mol%. Fourier transform infrared spectroscopy (FTIR) showed an increasing resolution between the symmetric and asymmetric CF₂ stretches, and a reduction in the intensity of the amorphous PTFE and CF₃ bands. High-resolution solid-state ¹⁹F nuclear magnetic resonance spectroscopy (NMR) revealed an increasing CF₂CF₂CF₂ character, with the pyrolytic CVD film much like bulk poly(tetrafluoroethylene) (PTFE). X-ray diffraction (XRD) patterns evidenced an increase in crystallinity, with the pyrolytic CVD film showing a characteristic peak at 2 = 18° representing the (100) plane of the hexagonal structure of crystalline PTFE above 19°C.     

Preparation,characterization, catalytic performance and antibacterial activity of Ag photodeposited on monodisperse ZnO submicron spheres

Monodisperse ZnO colloidal spheres were produced by a two-stage sol–gel reaction process. The sub-micrometer sized ZnO/Ag composite spheres were prepared by photodeposition route. The photochemical reduction method needs no other reductant or surfactant and is an effective means to enable the uniform distribution of Ag nanoparticles (NPs) over the ZnO spheres. The size and shape as well as the optical properties of the composites were characterized with transmission electron microscopy and UV–Vis spectroscopy. The results showed that average size of ZnO and Ag NPs among the composites was around 480, 10 nm, respectively. Ag NPs were relatively monodisperse, presented spherical shape, and their deposition over the ZnO surface was uniform. Formation of Ag NPs on the surface of ZnO spheres was confirmed by X-ray diffraction and X-ray photoelectron spectroscopy, and the catalytic performance and antibacterial activity was also investigated. The ZnO/Ag composites possess excellent catalytic performance for catalytic reduction of 4-nitrophenol to 4-aminophenol and can effectively inhibit Escherichia coli and Bacillus subtilis growth at 0.25 mg/mL.     

Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples,followed its determination by HPLC

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were prepared from magnetite (Fe₃O₄) as the magnetic component, paracetamol as the template, methacrylic acid as a functional monomer, and 2-(methacrylamido) ethyl methacrylate as a cross-linker. The m-MIPs were then characterized by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction and vibrating sample magnetometry. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples. Following its elution from the column loaded with the m-MIPs with an acetonitrile-buffer (9:1) mixture, it was submitted to HPLC analysis. Paracetamol can be quantified by this method in the 1 μg L^?1 to 300 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.17 and 0.4 μg L^?1. The preconcentration factor of the m-MIPs is 40. The HPLC method shows good precision (4.5 % at 50 μg L^?1 levels) and recoveries (between 83 and 91 %) from spiked plasma samples. Figure

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples     

Direct electrochemistry and electrocatalysis of hemoglobin on a glassy carbon electrode modified with poly(ethylene glycol diglycidyl ether) and gold nanoparticles on a quaternized cellulose support. A sensor for hydrogen peroxide and nitric oxide

A glassy carbon electrode was modified with gold nanoparticles (Au-NPs) on a quaternized cellulose support in a film composed of poly(ethylene glycol diglycidyl ether) (PEGDGE), and Hb was immobilized on the Au-NPs. The sensor film was characterized by UV–vis spectra, scanning electron microscopy, and electrochemical impedance spectroscopy. Cyclic voltammetry of the Hb in the Au@Qc/PEGDGE film revealed a pair of well-defined and quasi reversible peaks for the protein heme Fe(III)/Fe(II) redox couple at about ?0.333 V (vs. SCE). The sensor film also exhibited good electrocatalytic activity for the reduction of nitric oxide and hydrogen peroxide. The amperometric response of the biosensor depends linearly on the concentration of nitric oxide in the 0.9 to 160 μM range, and the detection limit is as low as 12 nM (at 3σ). The response to hydrogen peroxide is linear in the 59 nM to 4.6 μM concentration range, and the detection limit is 16 nM (at 3σ). This biosensor is sensitive, reproducible, and long-term stable. Figure

An electrochemical biosensor based on the immobilization of hemoglobin in Au@Qc NPs /Poly ethylene glycol diglycidyl ether composite film is developed.     

Plasma-assisted oxidation of Cu(100) and Cu(111)

Oxidized copper surfaces have attracted significant attention in recent years due to their unique catalytic properties, including their enhanced hydrocarbon selectivity during the electrochemical reduction of CO₂. Although oxygen plasma has been used to create highly active copper oxide electrodes for CO₂RR, how such treatment alters the copper surface is still poorly understood. Here, we study the oxidation of Cu(100) and Cu(111) surfaces by sequential exposure to a low-pressure oxygen plasma at room temperature. We used scanning tunnelling microscopy (STM), low energy electron microscopy (LEEM), X-ray photoelectron spectroscopy (XPS), near edge X-ray absorption fine structure spectroscopy (NEXAFS) and low energy electron diffraction (LEED) for the comprehensive characterization of the resulting oxide films. O₂-plasma exposure initially induces the growth of 3-dimensional oxide islands surrounded by an O-covered Cu surface. With ongoing plasma exposure, the islands coalesce and form a closed oxide film. Utilizing spectroscopy, we traced the evolution of metallic Cu, Cu₂O and CuO species upon oxygen plasma exposure and found a dependence of the surface structure and chemical state on the substrate''s orientation. On Cu(100) the oxide islands grow with a lower rate than on the (111) surface. Furthermore, while on Cu(100) only Cu₂O is formed during the initial growth phase, both Cu₂O and CuO species are simultaneously generated on Cu(111). Finally, prolonged oxygen plasma exposure results in a sandwiched film structure with CuO at the surface and Cu₂O at the interface to the metallic support. A stable CuO(111) surface orientation is identified in both cases, aligned to the Cu(111) support, but with two coexisting rotational domains on Cu(100). These findings illustrate the possibility of tailoring the oxidation state, structure and morphology of metallic surfaces for a wide range of applications through oxygen plasma treatments.

A low-pressure oxygen plasma oxidized Cu(100) and Cu(111) surfaces at room temperature. The time-dependent evolution of surface structure and chemical composition is reported in detail for a range of exposure times up to 30 min.     

Characterisation and comparison of biomass ashes with different thermal histories using TG-DSC

The present research is focused on the characterisation and comparison of biomass ashes from wood pellet with different thermal histories. One of the ashes is obtained in a muffle furnace until its mass stabilization reaching a temperature of 550 °C, low temperature ash (LTA); the other one came from an experimental fixed bed combustor after 4 h of stable combustion in which the temperature reached is above 1,000 °C, high temperature ash (HTA). The samples were studied using Thermogravimetry and Differential Scanning Calorimetry (TG-DSC) techniques, and they were subjected to a heating up to 900 °C under an inert atmosphere with the objective of perceiving the differences in their thermal behaviour. At these temperatures, complex phase transformations occur, related to decomposition of carbonates and formation of silicates. TG and DSC curves are compared and some differences in mass loss, temperature peaks and enthalpy associated to endothermic effects are detected and they are explained based on the different compositions of both samples obtained at different temperatures. Other techniques were applied for the determination of the chemical composition of the ashes; X-ray fluorescence and Scanning electron microscopy with energy dispersive X-ray spectroscopy showed the elements present in the ashes, and X-ray diffraction revealed the crystalline phases and confirms that LTA is mainly composed of carbonates, while HTA mostly consists of silicates.     

Chemical bath deposition of thin nanocrystalline tin(II) sulfide films with thioacetamide

Nanocrystalline tin(II) sulfide layers 100–650 nm thick were prepared by hydrochemical deposition on glass–ceramic supports from a citrate system at 323?343 K using thioacetamide as chalcogenizing agent. These films are of interest for the development of thin-film solar radiation converters based on the multicomponent compound Cu₂ZnSnS₄ of kesterite structure, prepared using a cost-saving process. Examination by scanning electron microscopy shows that tin(II) sulfide layers are formed from spherical nanocrystallites of 20–40 nm size. X-ray diffraction analysis shows that they crystallize in the orthorhombic system with the unit cell parameters a = 4.276, b = 11.243, and c = 3.986 Å. Analysis by X-ray photoelectron spectroscopy revealed the presence of up to 44.86 at. % oxygen in the surface layer of the film. This oxygen is mainly present in surface contaminants and is also incorporated in SnO present on the surface.     

Gradual Growth of Gold Nanoseeds on Silica for Silica@Gold Core–Shell Nano Applications by Two Different Methods: A Comparison on Structural Properties

This paper describes the homogeneous growth of gold shells on the surfaces of spherical dielectric silica nanoparticle cores by two different approaches: common two-step method (the name) and deposition–precipitation process. The methods basically are different in forming the precursor gold seed particles on silica. The structural and optical properties and morphology of the nanoparticles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), UV–Vis spectrophotometery, and photo luminescence spectroscopy (PL). The results showed that, although in both the methods the core–shell nanoparticles can be reliably prepared in a controlled fashion with a favorable uniformity, but deposition–precipitation method indicated a better mechanical stability while it was more cost and time effective too. A regular red shift, from 488 to 662 nm, and peak broadening was also risen for the striking plasmon absorption peak as gold nanoseeds created by each of the two methods grew in size on silica cores.     

Study of interaction between nitrogen DBD plasma-treated viscose fibers and divalent ions Ca2+ and Cu2+

Viscose fibers were treated with atmospheric pressure dielectric barrier discharge (DBD) plasma obtained in nitrogen in order to activate the fiber surface prior to sorption of the divalent ions Ca²⁺ and Cu²⁺. Methylene blue sorption was used for estimation of carboxyl group formation on the surface after DBD plasma treatment, through the degree of fabric staining (K/S). Sorption of divalent ions was performed from solutions of each individual ion and from solutions of calcium and copper in succession onto untreated and plasma-treated viscose samples. The quantity of sorbed metal was determined from the neutralization and iodometric titration method. Scanning electron microscopy coupled with energy dispersive X-ray analysis was used for fiber morphology and surface characterization before and after plasma treatment, and after metal ions sorption. Experiments revealed copper microparticles formation on the fiber surface when sorption of copper was performed on samples with bonded calcium. Further analysis confirmed that for growth of copper particles, both calcium ions and nitrogen DBD plasma pretreatments are necessary.     

Electron Flood Gun Damage Effects in 3D Secondary Ion Mass Spectrometry Imaging of Organics

Electron flood guns used for charge compensation in secondary ion mass spectrometry (SIMS) cause chemical degradation. In this study, the effect of electron flood gun damage on argon cluster depth profiling is evaluated for poly(vinylcarbazole), 1,4-bis((1-naphthylphenyl)amino)biphenyl and Irganox 3114. Thin films of these three materials are irradiated with a range of doses from a focused beam of 20 eV electrons used for charge neutralization. SIMS chemical images of the irradiated surfaces show an ellipsoidal damaged area, approximately 3 mm in length, created by the electron beam. In depth profiles obtained with 5 keV Ar₂₀₀₀ ⁺ sputtering from the vicinity of the damaged area, the characteristic ion signal intensity rises from a low level to a steady state. For the damaged thin films, the ion dose required to sputter through the thin film to the substrate is higher than for undamaged areas. It is shown that a damaged layer is formed and this has a sputtering yield that is reduced by up to an order of magnitude and that the thickness of the damaged layer, which increases with the electron dose, can be as much as 20 nm for Irganox 3114. The study emphasizes the importance of minimizing the neutralizing electron dose prior to the analysis. Figure

?     

Dual thermo- and pH-sensitive poly(2-hydroxyethyl methacrylate-co-acrylic acid)-grafted graphene oxide

A two-step modification was used to attach atom transfer radical polymerization (ATRP) initiator onto graphene oxide surface. ATRP polymerization of 2-hydroxyethyl methacrylate (HEMA) was performed via “grafting from” approach. Due to uncontrolled ATRP of acrylic acid (AA), the Br-terminated P(HEMA) chains were converted to reversible addition–fragmentation chain transfer agent and polymerization of AA was done. The structure of modified nanosheets was characterized using X-ray diffraction analysis, Raman spectroscopy, proton nuclear magnetic resonance, scanning electron microscopy, and etc. These nanosheets showed dual pH- and thermo-sensitive properties as measured by UV–visible spectroscopy in different pH (2–13) and temperature (15–55 °C) values. Generally, UV absorbance of P(HEMA-co-AA)-grafted nanosheets was higher than P(HEMA)-grafted nanosheets. Also, it seems that the poly(acrylic acid) block induces more pH sensitivity behavior than P(HEMA) block. Lower critical solution temperature of polymer-grafted nanosheets were shifted to higher temperature when chain extension was performed.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Sustainable synthesis of Penicillium-derived highly conductive carbon film as superior binder-free electrode of lithium ion batteries

Fungi (Penicillium chrysogenum) were used as green and sustainable sources to fabricate free-standing binder-free carbon film through pyrolysis in inert atmosphere. The fungi before and after carbonization were characterized with scanning electron microscope (SEM), Fourier transformed infrared spectroscopy (FTIR), electron microprobe (EM), and Raman spectrum. The results showed that the fungi were composed of ultra-long microfibers around 3 μm in diameter, which can be readily transformed into membrane precursor. Abundant functional groups were detected on fungi. The carbon membrane from the pyrolysis of membrane precursor was constructed by the uniformly interconnected fibers. After carbonization, the functional groups disappeared, while the product was doped by O and N atoms. The conductivity of carbon film was as high as 29.4 S cm^?1. Moreover, the carbon film was successfully applied as low-cost electrode in lithium ion batteries (LIBs). The capacity of the LIBs maintained 207 mA h g^?1 with 89.6 % capacity retention after 80 cycles.     

Functionalization of cellulose with epoxy groups via γ-initiated RAFT-mediated grafting of glycidyl methacrylate

Glycidyl methacrylate (GMA), was grafted from cellulose by the combination of radiation-induced initiation and the reversible addition-fragmentation chain transfer (RAFT) polymerization technique, leading to epoxy functionalized surfaces that enable further modifications. Cumyl dithiobenzoate and 2-cyanoprop-2-yl dithiobenzoate were employed as the RAFT agents. The effects of absorbed dose, monomer and RAFT agent concentrations and solvent choice on grafting yield were investigated. Characterization of the synthesized copolymers by ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, thermal analysis and contact angle measurements revealed the grafting of poly(glycidyl methacrylate) (PGMA) from cellulose. Size-exclusion chromatography analysis indicated the difficulty of controlling the polymerization of GMA due to branching and/or crosslinking reactions that might occur in PGMA structure under γ-radiation.     

On the history of cluster beams

The methods to produce and investigate cluster beams have been developed primarily with the use of permanent gases. A summary is given of related work carried out at Marburg and Karlsruhe. The report deals with the effect of carrier gases on cluster beam production; ionization, electrical acceleration and magnetic deflection of cluster beams; the retarding potential mass spectrometry of cluster beams; cluster size measurement by atomic beam attenuation; reflection of cluster beams at solid surfaces; scattering properties of⁴He and³He clusters; the application of cluster beams in plasma physics, and the reduction of space charge problems by acceleration of cluster ions.     

A sensor based on incorporating Ni2+ into ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat nanocomposite film modified carbon paste electrode for determination of carbohydrates

The ZnO nanoparticles (ZnONPs) were synthesized with gelatin as stabilizer via the sol-gel method and were characterized by transmission electron microscope (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). An electrochemical sensor based on ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat (ZnONPs-MWCNT-PMMA) composite film was developed by incorporating Ni²⁺ into the ZnONPs-MWCNT-PMMA film modified carbon paste electrode (Ni²⁺/ZnONPs-MWCNT-PMMA/CPE). The electrochemical activity of Ni²⁺/ZnONPs-MWCNT-PMMA/CPE was illustrated in 0.10 M NaOH using cyclic voltammetry. The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple. Ni²⁺/ZnONPs-MWCNT-PMMA/CPE also show good electrocatalytic activity toward the oxidation of carbohydrates (glucose, fructose and sorbitol). The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE gives a good linear range with a detection limit of 8, 6, and 9 μM towards the determination of glucose, fructose and sorbitol, respectively by amperometry. Furthermore, the modified sensor was successfully applied to the sensitive determination of carbohydrates in real samples.     

Preparation and characterization of poly (acrylic acid-dimethylaminoethylmethacrylate) as amphoteric exchange resin and its adsorption properties

Poly (acrylic acid-dimethylaminoethylmethacylate) resin was prepared by copolymerization technique. Gamma irradiation as initiator was used for the polymerization process. Obtained polymeric resin is an amphoteric ion exchange resin in which a quaternary ammonium group and a carboxyl group are incorporated on a cross-linked polymer frame. The physicochemical properties of obtained polymeric resin were determined using inductively coupled plasma (ICP), Fourier transform infrared spectroscopy (FTIR), TGA-DTA, and scanning electron microscope (SEM). Ion-exchange capacity (IEC), thermal stability, distribution behavior, etc. were also carried out to understand the adsorption behavior of the material. The equilibrium data were analyzed by the Langmuir and Freundlich isotherm models. The kinetic models’ data with zinc ions were studied.     

A New Copper(I) Coordination Polymer with N2-Donor Schiff Base and Its Use as Precursor for CuO Nanoparticle: Spectroscopic,Thermal and Structural Studies

A new copper(I) coordination polymer, [Cu((3,4-MeO-ba)₂bn)I]_n (1), using a bridging Schiff base ligand, N,N′-bis(3,4-dimethoxybenzylidene)butane-1,4-diamine, (3,4-MeO-ba)₂bn, containing a flexible spacer (=N–CH₂–CH₂–CH₂–CH₂–N=) has been synthesized and characterized by elemental analyses (CHN) and FTIR spectroscopy, thermal analysis and powder X-ray structure analysis. In 1, Cu(I) ions are bridged by Schiff base ligands and iodine atoms forming 1D-chain. The thermal stability of 1 was studied by thermal gravimetric and differential thermal analyses. 1 is used to prepare CuO nanoparticles via solid state thermal decomposition in air and nanoparticles thus formed are characterized by scanning electron microscopy, transmission electron microscopy and powder X-ray diffraction techniques.     

An experimental study on thermal decomposition behavior of magnesite

Thermal decomposition of magnesite is investigated by using a TG–MS. Different kinetic methods including Coats–Redfern, Flynn–Wall–Ozawa, and Kissinger–Akahira–Sunose are used to investigate the thermal decomposition kinetics of magnesite. It was observed that the activation energy values obtained by these methods are similar. The average apparent activation energy is found to be about 203 kJ mol^?1. The raw magnesite and its decomposition products obtained at different temperatures are analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). The concentration of functional groups, crystal structure and composition, and apparent morphology of decomposition products were studied in detail. The FTIR, XRD, and SEM analyses showed that magnesite was completely decomposed at 973 K to form MgO.