Topological and thermodynamic investigations of molecular interactions of aniline and o-toluidine with chloroform

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound data, u, of chloroform (i) + aniline or o-toluidine (j) binary mixtures have been measured as a function of composition at 308.15 K. Isentropic compressibility changes of mixing, have been determined by employing speed of sound data. Topological investigations of V^E data reveals that aniline, chloroform and o-toluidine are associated entities and these (i + j) mixtures contain a 1:1 molecular complex. The IR studies lend further support to the nature and extent of interaction for the proposed molecular entity in the mixtures. H^E and values have also been calculated by employing Moelwyn-Huggins concept [Polymer 12 (1971) 387] taking topology of the constituents of the mixtures. It has been observed that calculated H^E and values compare well with their corresponding experimental values. The observed V^E, H^E and data have also been analyzed in terms of Flory theory.     

Topological and thermodynamic investigations of binary mixtures: Molar excess volumes, molar excess enthalpies and isentropic compressibility changes of mixing

Molar excess volumes, V^E, molar excess enthalpies, H^E, and speeds of sound, u, of o-toluidine (i) + cyclohexane or n-hexane or n-heptane (j) binary mixtures have been determined over entire range of composition at 308.15 K. Speeds of sound data have been utilized to predict isentropic compressibility changes of mixing, of (i + j) mixtures. The observed V^E, H^E and data have been analyzed in terms of Graph theory. The analysis of V^E data by Graph theory reveals that o-toluidine exists as an associated molecular entity and (i + j) mixtures contain 1:1 molecular complex. It has been observed that V^E, H^E and values calculated by Graph theory compare well with their corresponding experimental values. The observed data have also been analyzed in term of Flory theory.     

Molar Excess Volumes and Excess Isentropic Compressibilities of Ternary Mixtures Containing <Emphasis Type="Italic">o</Emphasis>-Toluidine

Molar excess volumes, V _ijk ^E, and speeds of sound, U _ijk , of o-toluidine (i) + benzene (j) + cyclohexane or n-hexane or n-heptane (k) ternary mixtures have been measured as a function of composition at 308.15 K. The observed speed of sound data have been utilized to determine the excess isentropic compressibilities, (K _S ^E) _ijk , of the ternary (i+j+k) mixtures. The Moelywn-Huggins concept (Huggins in Polymer 12: 389–399, 1971) of connectivity between the surfaces of the binary mixture constituents has been extended to ternary mixtures (using the concept of a connectivity parameter of third degree of molecules, ³ ξ, which in turn depends on its topology) to obtain an expression that describes well the measured V _ijk ^E and (K _S ^E) _ijk data. The observed data have also been analyzed in terms of Flory’s theory.     

Isothermal vapor–liquid equilibrium at 333.15 K and excess molar volumes at 298.15 K for the ternary system di-isopropyl ether + n-propyl alcohol + toluene and its binary subsystems

Isothermal vapor–liquid equilibrium data at 333.15 K are reported for the ternary system di-isopropyl ether (DIPE) + n-propyl alcohol + toluene and the binary subsystems DIPE + n-propyl alcohol, DIPE + toluene and n-propyl alcohol + toluene by using headspace gas chromatography. The excess molar volumes at 298.15 K for the same binary and ternary systems were also determined by directly measured densities. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and the excess molar volumes were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Direct quantum mechanical calculation of the F + H2 → HF + H thermal rate constant

Accurate full-dimensional quantum mechanical thermal rate constant values have been calculated for the F+H₂→HF+H reaction on the Stark–Werner ab initio potential energy surface. These calculations are based on a flux correlation functions and employ a rigorous statistical sampling scheme to account for the overall rotation and the MCTDH scheme for the wave packet propagation. Our results shed some light on discrepancies on the thermal rate found for previous flux correlation based calculations with respect to accurate reactive scattering results. The resonance pattern of the all-J cumulative reaction probability is analyzed in terms of the partial wave contributions.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

Vibrational linestrengths for the ground and first excited electronic states of HeH<Subscript>2</Subscript><Superscript>+</Superscript>

Together with recent improved potential-energy surface calculations for the ground (X) and first excited (Ã) electronic states of HeH₂ ⁺, the electric dipole moment surfaces for each state and the transition dipole moments connecting the two states were evaluated for the entire range of the energy calculations. Using these functions the linestrengths of all dipole-allowed transitions between the bound vibrational levels within each of the two states (XX) and (ÃÃ) as well as between them (ÃX) are evaluated here. These data are believed to be useful both in the experimental search for the yet unobserved molecular spectra of HeH₂ ⁺ and in evaluating theoretical rates for the radiative association or photodissociation processes involving the two lowest electronic states of the ion.Contribution to the Björn Roos Honorary Issue     

Density Functional Method Study on the Cooperativity of Intermolecular H-bonding and π-π+ Stacking Interactions in Thymine-[Cnmim]Br (n = 2, 4, 6, 8, 10) Microhydrates

The exploration of the ionic liquids’ mechanism of action on nucleobase’s structure and properties is still limited. In this work, the binding model of the 1-alkyl-3-methylimidazolium bromide ([C_nmim]Br, n = 2, 4, 6, 8, 10) ionic liquids to the thymine (T) was studied in a water environment (PCM) and a microhydrated surroundings (PCM + wH₂O). Geometries of the mono-, di-, tri-, and tetra-ionic thymine (T-wH₂O-y[C_nmim]⁺-xBr⁻, w = 5~1 and x + y = 0~4) complexes were optimized at the M06-2X/6-311++G(2d, p) level. The IR and UV-Vis spectra, QTAIM, and NBO analysis for the most stable T-4H₂O-Br⁻-1, T-3H₂O-[C_nmim]⁺-Br⁻-1, T-2H₂O-[C_nmim]⁺-2Br⁻-1, and T-1H₂O-2[C_nmim]⁺-2Br⁻-1 hydrates were presented in great detail. The results show that the order of the arrangement stability of thymine with the cations (T-[C_nmim]⁺) by PCM is stacking > perpendicular > coplanar, and with the anion (T-Br⁻) is front > top. The stability order for the different microhydrates is following T-5H₂O-1 < T-4H₂O-Br⁻-1 < T-3H₂O-[C_nmim]⁺-Br⁻-1 < T-2H₂O-[C_nmim]⁺-2Br⁻-1 < T-1H₂O-2[C_nmim]⁺-2Br⁻-1. A good linear relationship between binding E_B values and the increasing number (x + y) of ions has been found, which indicates that the cooperativity of interactions for the H-bonding and π-π⁺ stacking is varying incrementally in the growing ionic clusters. The stacking model between thymine and [C_nmim]⁺ cations is accompanied by weaker hydrogen bonds which are always much less favorable than those in T-xBr⁻ complexes; the same trend holds when the clusters in size grow and the length of alkyl chains in the imidazolium cations increase. QTAIM and NBO analytical methods support the existence of mutually reinforcing hydrogen bonds and π-π cooperativity in the systems.     

Measurement and correlation of (liquid + liquid) equilibrium of the azeotrope (cyclohexane + 2-butanone) with different ionic liquids at T = 298.15 K

Experimental densities, speeds of sound, and refractive indices of the binary mixtures of 2-butanone with cyclohexane and OMIM PF₆ (1-methyl-3-octylimidazolium hexafluorophosphate) were determined from T = (293.15 to 303.15) K, since they are necessary to determine the (liquid + liquid) equilibrium. Excess molar volumes, changes of refractive index on mixing, and deviations in isentropic compressibility for the above systems were calculated. Experimental (liquid + liquid) equilibrium of the ternary mixtures {cyclohexane + 2-butanone + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} and (cyclohexane + 2-butanone + OMIM PF₆) were carried out to assess the suitability of HMIM PF₆ and OMIM PF₆ as azeotrope breaker of the mixture cyclohexane and 2-butanone. Selectivity and distribution ratio values, derived from the tie lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibrium data were compared with the correlated values obtained by means of the NRTL and UNIQUAC models.     

Theoretical studies of uracil–(H2O)n (n = 1–7) clusters by ab initio and ABEEMσπ/MM fluctuating charge model

Uracil–(H₂O)_n (n = 1–7) clusters were systemically investigated by ab initio methods and the newly constructed ABEEMσπ/MM fluctuating charge model. Water molecules have been gradually placed in an average plane containing uracil. The geometries of 38 uracil–water complexes were obtained using B3LYP/6-311++G** level optimizations, and the energies were determined at the MP2/6-311++G** level with BSSE corrections. The ABEEMσπ/MM potential model gives reasonable properties of these clusters when comparing with the present ab initio data. For interaction energies, the root mean square deviation is 0.96 kcal/mol, and the linear coefficient reaches 0.997. Furthermore, the ABEEMσπ charges changed when H₂O interacted with the uracil molecule, especially at the sites where the hydrogen bond form. These results show that the ABEEMσπ/MM model is fine giving the overall characteristic hydration properties of uracil–water systems in good agreement with the high-level ab initio calculations.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

New results in the ammonolysis of hexafluoro-cyclo-triphosphazene: Crystal structure of P3N3F5–NH–P3N3F4NH2

The reaction of hexafluoro-cyclo-triphosphazene P₃N₃F₆ with ammonia in acetonitrile has been studied. New compounds, (2-imino-2,4,4,6,6-pentafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-trienyl)-2-amino-4,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) and cis and trans isomers of non-gem-2,4-diamino-2,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₄(NH₂)₂ (4, 5)_, were detected by GC/MS, and ³¹P NMR spectroscopy in reaction mixtures. X-ray diffraction analysis of P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) revealed two conformational polymorphs, 2A and 2B, the latter being built up of two different conformers that were further denoted as 2B_a (the same as the single conformer in 2A) and 2B_b. The compound 2 was characterized by spectroscopic methods and its 2D potential energy surface (PES) was described by density functional theory computations depending on two dihedral angles. The calculated PES spans over 30 kJ/mol in energy including 8 local minima and all first and second order saddle points. The occurrence of the two experimentally observed conformers 2B_a and 2B_b seems to be governed by crystal packing effects.     

Xanthones from <Emphasis Type="Italic">Halenia corniculata</Emphasis>. 2. Quantitative Determination of Total γ-Pyrone Content in the Aerial Part

A method for quantitative determination of total γ-pyrone content in the aerial part of Halenia corniculata was developed. Their total content in various samples of the aerial part was investigated.__________Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 245–247, May–June, 2005.     

Nuclear magnetic relaxation and ionic solvation of23Na+ and81Br− in aqueous mixtures of simple amides

Ion-solvent interactions of Na⁺ and Br^– in binary aqueous mixtures of formamide,N-methylformamide (NMF), andN,N-dimethylformamide (DMF) are studied by use of²³Na and⁸¹Br magnetic relaxation times, extrapolated to zero salt concentration. The relaxation times, which are controlled by quadrupolar interaction, have been measured over the complete mixture range and are compared with a simplified theoretical formula. It turned out that the²³Na⁺ relaxation in H₂O-formamide and H₂O-NMF mixtures is in excellent agreement with theoretical predictions, implying nonpreferential solvation of Na⁺ in these systems. Small deviations of experimental from theoretical results in H₂O+DMF possibly indicate weak selective hydration of the cation. In the case of the anionic nuclei⁸¹Br^–, deviations from the theoretical curve occur which are to be expected, especially for systems where hydrophobic effects play a role. On the other hand, it is demonstrated that these deviations can easily be explained within the electrostatic theory by differences in structural details of the anionic solvation sphere in the mixtures compared to the pure solvents.     

Liquid-Liquid Extraction of Indium(III) from the HCl Medium by Ionic Liquid A327H+Cl− and Its Use in a Supported Liquid Membrane System

Ionic liquid A327H⁺Cl⁻ was generated by reaction of tertiary amine A327 and HCl, and the liquid-liquid extraction of indium(III) from the HCl medium by this ionic liquid dissolved in Solvesso 100 was investigated. The extraction reaction is exothermic. The numerical analysis of indium distribution data suggests the formation of A327H⁺InCl₄⁻ in the organic phase. The results derived from indium(III) extraction have been implemented in a supported liquid membrane system. The influence of the stirring speed (600–1200 min⁻¹), carrier concentration (2.5–20% v/v) in the membrane phase, and indium concentration (0.01–0.2 g/L) in the feed phase on metal transport have been investigated.     

Electrodeposition of Lu on W and Al electrodes: Electrochemical formation of Lu–Al alloys and oxoacidity reactions of Lu(III) in the eutectic LiCl–KCl

The electrodeposition of lutetium on inert electrodes and the formation of lutetium–aluminium alloys were investigated in the eutectic LiCl–KCl in the temperature range 673–823 K. On a tungsten electrode, the electroreduction of Lu(III) proceeds in a single step and electrocrystalization plays an important role. Experimental current–time transients are in good agreement with theoretical models based on either instantaneous or progressive nucleation with three dimensional growth of the nuclei, depending on the working temperature. The diffusion coefficient of Lu(III) was determined by chronopotentiometry by applying the Sand equation. The activation energy for diffusion was found to be 31.5 ± 1.3 kJ mol⁻¹. Al₃Lu and mixtures of Al₃Lu and Al₂Lu, characterized by XRD analysis and SEM, were obtained from the LiCl–KCl melt containing Lu(III) by potentiostatic electrolysis using an Al electrode. The activity of Lu and the standard Gibbs energies of formation for Al₃Lu were estimated from open-circuit chronopotentiometric measurements. The E–pO²⁻(potential–oxoacidity) diagram for Lu–O stable compounds in LiCl–KCl at 723 K has been constructed by combining theoretical and experimental data. In this way, the apparent standard potential for the Lu(III)/Lu system has been determined by potentiometry. Potentiometric titrations of Lu(III) solutions with oxide donors, using a yttria stabilized zirconia membrane electrode “YSZME” as a pO²⁻ indicator electrode, have shown the stability of LuOCl and Lu₂O₃ in the melt and their solubility products have been determined at 723 K.     

Thermodynamic investigations on derivatives of pyrimidine nucleic acid bases: Joint use of calorimetric, volumetric and structural data for the description of properties of pyrimidine nucleic acid bases and their derivatives

The experimental enthalpies of solution Δ_solH_m^∞, van’t Hoff enthalpies of sublimation Δ_s^gH_m⁰ of solid compounds, partial molar volumes V₂⁰, and partial molar heat capacities C_p,2⁰ of aqueous solutions of pyrimidine nucleic acid bases and their derivatives, determined previously and collected here, are discussed in terms of calculated structural parameters. Relations have been established between the calorimetric and volumetric properties. Correlations have been developed to relate both the enthalpies of solvation and the partial molar heat capacities to the polar and apolar parts of the accessible molecular surface areas.     

Current Status of the X + C2H6 [X ≡ H,F(2P), Cl(2P), O(3P), OH] Hydrogen Abstraction Reactions: A Theoretical Review

This paper is a detailed review of the chemistry of medium-size reactive systems using the following hydrogen abstraction reactions with ethane, X + C₂H₆ → HX + C₂H₅; X ≡ H, F(²P), Cl(²P), O(³P) and OH, and focusing attention mainly on the theoretical developments. These bimolecular reactions range from exothermic to endothermic systems and from barrierless to high classical barriers of activation. Thus, the topography of the reactive systems changes from reaction to reaction with the presence or not of stabilized intermediate complexes in the entrance and exit channels. The review begins with some reflections on the inherent problems in the theory/experiment comparison. When one compares kinetics or dynamics theoretical results with experimental measures, one is testing both the potential energy surface describing the nuclei motion and the kinetics or dynamics method used. Discrepancies in the comparison may be due to inaccuracies of the surface, limitations of the kinetics or dynamics methods, and experimental uncertainties that also cannot be ruled out. The paper continues with a detailed review of some bimolecular reactions with ethane, beginning with the reactions with hydrogen atoms. The reactions with halogens present a challenge owing to the presence of stabilized intermediate complexes in the entrance and exit channels and the influence of the spin-orbit states on reactivity. Reactions with O(³P) atoms lead to three surfaces, which is an additional difficulty in the theoretical study. Finally, the reactions with the hydroxyl radical correspond to a reactive system with ten atoms and twenty-four degrees of freedom. Throughout this review, different strategies in the development of analytical potential energy surfaces describing these bimolecular reactions have been critically analyzed, showing their advantages and limitations. These surfaces are fitted to a large number of ab initio calculations, and we found that a huge number of calculations leads to accurate surfaces, but this information does not guarantee that the kinetics and dynamics results match the experimental measurements.     

A novel method for the synthesis of (Z)-α-selenyl-α,β-unsaturated ketones via acylation of (E)-α-selanylvinylstannanes

The (E)-α-selenylvinylstannanes react with acyl halides in presence of a catalytic amount of Pd(PPh₃)₄ to give the corresponding (Z)-α-selenyl-α,β-unsaturated ketones in good yield.     

Experimental and theoretical study of the hydration of phosphate groups in esters of biological interest

We have studied the influence of different groups esterified to phosphates on the strength of the interaction of the PO bond with one water molecule. Experimental vibrational spectra of PO(4)3-, HPO4(2-), H2PO4-, phosphoenolpiruvate (PEP) and ortho-phosphocholamine (o-PC) were obtained by means of FTIR spectroscopy. Geometry calculations were performed using standard gradient techniques and the default convergence criteria as implemented in GAUSSIAN 98 Program. In order to assess the behaviour of such DFT theoretical calculations using B3LYP with 6-31G* and 6-311++G** basis sets, we carried out a comparative work for those compounds. The results were then used to predict the principal bands of the vibrational spectra and molecular parameters (geometrical parameters, stabilisation energies, electronic density). In this work, the relative stability and the nature of the PO bond in those compounds were systematically and quantitatively investigated by means of Natural Bond Order (NBO) analysis. The topological properties of electronic charge density are analysed employing Bader's Atoms in Molecules theory (AIM). The hydrogen bonding of phosphate groups with water is highly stable and the PO bond wavenumbers are shifted to lower experimental and calculated values (with the DFT/6-311++G** basis set). Accordingly, the predicted order of the relative stability of the hydrogen bonding of the water molecule to the PO bond of the investigated compounds is: PO(4)3->HPO4(2-)>H2PO4->phosphoenolpiruvate>phosphocholamine for the two basis sets used.