Determination of tocopherols and sterols in vegetable oils by solid-phase extraction and subsequent capillary gas chromatographic analysis.

In general, analyses of tocopherols and sterols are performed separately in vegetable oils. By applying solid-phase extraction (SPE) prior to capillary gas chromatography, a simple and reliable procedure for the quantification of both tocopherols and sterols in a single analytical run has been developed. SPE was used as sample clean up procedure for the separation of these minor components from the triacylglycerol matrix, replacing time consuming saponification or on-line LC-GC. The analysis of tocopherols and free sterols in five different vegetable oils illustrates robustness and reliability of this method outlined. Quantification of the analytes was performed by external calibration with reference substances and internal standardization. The recovery of the procedure as well as the repeatability of the quantitative results have been evaluated.     

Quantification of free and esterified sterols in Portuguese olive oils by solid-phase extraction and gas chromatography-mass spectrometry

A simple and accurate method based on solid-phase extraction (SPE), transesterification and gas chromatography-mass spectrometry (GC-MS) was developed for the quantitative analysis of free and esterified sterols of olive oil. In order to achieve better separation of esterified and free sterols, silica and alumina SPE adsorbents were tested. Separations by silica provided more reproducible results. The transesterification of both sterol fractions was found to be more user friendly than saponification as a method to liberate the sterols from the respective esters. The free sterols were then silylated with N,O-bis-trimethylsilyltrifluoroacetamide (BSTFA) with 1% of trimethylchlorosilane (TMCS). The most favourable conditions for exploitation of this reagent were established. The optimized methodology was suitable for evaluation of free and esterified sterols in Protected Designation of Origin (PDO) olive oils and monovarietal olive oils with different maturation indices. The prevailing phytosterols in all olive oils were beta-sitosterol and campesterol. The free sterols predominated, although they seemed to decrease with the maturation of the olive fruits.     

Determination of gliclazide in serum by high-performance liquid chromatography using solid-phase extraction.

A simple and sensitive high-performance liquid chromatographic method for a routine assay of gliclazide in serum is described. Serum samples spiked with glibenclamide (internal standard) were applied to Bond Elut C18 cartridges. After washing with phosphate buffer (pH 7.5) and water, the cartridge was eluted with 60% methanol. The eluate was evaporated to dryness. The residue was dissolved in methanol and injected onto an octadecyl silica column (5 microns, 150 mm x 4.6 mm I.D.). The mobile phase was 0.04 M potassium dihydrogenphosphate (pH 4.6)-acetonitrile-isopropyl alcohol (5:4:1, v/v). Ultraviolet detection at 227 nm was used. The minimum detectable level of gliclazide was 20 ng/ml.     

Validation of a solid-phase extraction high-performance liquid chromatographic assay for doxazosin.

The determination of doxazosin by high-performance liquid chromatography with fluorescence detection is described. Propanolol was used as the internal standard. Plasma samples were treated with methanol to precipitate the proteins. Doxazosin was isolated with C18 reversed-phase extraction columns. The determination limit is 1 ng/ml of plasma, while the extraction columns can be reused frequently. The method is applied to clinical trial samples.     

On-line solid-phase extraction and high-performance liquid chromatographic determination of nortriptyline and amitriptyline in serum.

An isocratic reversed-phase high-performance liquid chromatographic method with on-line solid-phase extraction for the simultaneous determination of amitriptyline and nortriptyline in serum has been developed. A 250-microliters serum sample is injected directly onto a commercially available CN cartridge and, after a washing step, the retained solutes are backflushed onto a bonded-phase CN column using a column-switching technique and a mobile phase composed of acetonitrile (26%) and 0.05 M phosphate buffer with diethylamine. Serum is diluted with 0.1 M sodium lauryl sulphate and centrifuged before the injection. Detection at 210 nm ensures sufficient sensitivity. The recovery is almost quantitative and the relative standard deviation ranges from 2.8 to 8.0% for concentrations of 200-40 ng/ml. Being rapid and simple, the method is convenient for routine use.     

Determination of sulfonamides in livers using matrix solid-phase dispersion extraction high-performance liquid chromatography

The matrix solid-phase dispersion (MSPD) was applied for extracting seven sulfonamides (SAs) in liver samples. The separation and determination were carried out by high-performance liquid chromatography. The analytes were derivated with fluorescamine and detected with fluorescence detector. The types of dispersion adsorbents for MSPD were examined and the highest recovery was obtained when the diatomaceous earth was used as the dispersion adsorbent and the mass ratio of dispersion adsorbent to sample was 3:1. The acetone was used as the elution solvent. Under the optimal conditions, the linear range for determining the SAs in liver samples was 5.0-1000.0 ng/g. The porcine, chicken and cattle liver samples were analyzed and the average recoveries of seven SAs were higher than 84.6%.     

Determination of tetracyclines in bovine and porcine muscle by high-performance liquid chromatography using solid-phase extraction.

A method is presented for the determination of the three tetracyclines oxytetracycline, tetracycline and chlortetracycline in muscle, spiked at 100 ng/g, using high-performance liquid chromatography (HPLC). The concentration and extraction steps are carried out using Waters Environmental Sep-Pak cartridges. The principal steps involve homogenizing the sample in EDTA-McIlvaine buffer followed by centrifugation and precipitation of the supernatant using trichloroacetic acid. After further filtration and concentration on a Sep-Pak cartridge, the sample is eluted and analysed by HPLC with UV detection and confirmation by diode-array. The column used is a Nova-Pak C18 (4 microns) cartridge (10 cm x 8 mm I.D.). A phosphate-citrate-acetonitrile buffer, utilizing ion suppression, is the mobile phase. The analytes are detectable at levels down to 10 ng/g. The analyte identity can be confirmed at 20 ng/g by the use of diode-array detection and spectral library comparison.     

Matrix solid-phase dispersion extraction and high-performance liquid chromatographic determination of residual sulfonamides in chicken.

Simultaneous determination of the six sulfonamides (SAs) sulfadiazine, sulfadimidine, sulfamonomethoxine, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in chicken using matrix solid-phase dispersion (MSPD) with neutral aluminium oxide as an MSPD sorbent and high-performance liquid chromatography (HPLC) is presented. In the present MSPD, six SAs could be isolated by only one step, elution with a 70% (v/v) aqueous ethanol solution, without the sorbent conditioning and the sorbent-tissue matrix washing. For the HPLC determination, a LiChrospher 100 RP-8 and a mixture of 1% acetic acid solution (pH 3.0, in water)-acetonitrile-N,N-dimethylformamide (78:22:5, v/v/v) as the mobile phase with a photodiode array detector were used. Average recoveries were greater than 87.6% with relative standard deviations between 0.5 and 8.6%. The total time and amount of solvent required for the analysis of one sample were <1.5 h and <12 ml, respectively.     

Determination of estazolam in plasma by high-performance liquid chromatography with solid-phase extraction.

A high-performance liquid chromatography (HPLC) assay was developed for the determination of estazolam in human plasma. Estazolam and alprazolam as an internal standard were detected by ultraviolet absorbance at 240 nm. Estazolam in plasma was extracted by a rapid and simple procedure based on cyanopropyl bonded-phase extraction. Chromatographic separation was achieved with a reversed-phase C8-5 column using a mobile phase of 0.5% potassium dihydrogenphosphate(pH 4.5)-acetonitrile (70:30, v/v). The determination of estazolam was possible in the concentration range of 1.0 - 200.0 ng/mL. The mean recovery of estazolam added to plasma was 96.1 +/- 1.5% with coefficients of variation of less than 5.5%. This method is applicable for accurately monitoring the plasma level of estazolam in healthy subjects participating in scientific research.     

Rapid, high-resolution high-performance liquid chromatographic analysis of antibiotics

A HPLC column devised for high separation speed combined with highly practical operating features has been found useful for separating antibiotics. Important characteristics involve compromises in packing particle size, column configuration and support-stationary phase combinations. We determined that these columns are useful for rapid, high-resolution separations with unmodified state-of-the-art HPLC equipment without the extra-column band-broadening effects typical of so-called “fast” HPLC columns. The proposed columns feature efficient sterically-protected monofunctional silane stationary phases that provide good separation reproducibility and high column stability. The combination of these unique bonded silanes and a highly purified, less-acidic silica support give superior peak shapes for antibiotic compounds. The proposed column configuration can halve separation times and double peak heights without loss in resolution, compared to widely used analytical columns. Increased mobile phase flow-rates permit even faster separations of antibiotics with only modest loss in resolution and peak heights for trace analyses in biological systems.     

Determination of 4-aminopyridine in serum by solid-phase extraction and high-performance liquid chromatography.

An assay for the determination of 4-aminopyridine in serum has been developed using 3,4-diaminopyridine as internal standard and reversed-phase high-performance liquid chromatography with detection at 244 nm. A mobile phase of acetonitrile-methanol-ethanol-1% ammonium carbonate (75:10:10:5) provided excellent separation of both compounds. Samples were extracted on solid-phase columns. The linearity, precision, recovery and the limit of detection were all sufficient for the routine use of this assay in clinical studies of patients treated with 4-aminopyridine.     

Determination of p-methylthiobenzamide and p-methylthiobenzamide-S-oxide from rat plasma using solid-phase extraction and high-performance liquid chromatography

p-Methylthiobenzamide (PMTB) is a thiocarbonyl compound exhibiting marked hepatotoxicity and nephrotoxicity. We describe a high-performance liquid chromatographic method for analyzing PMTB and a metabolite, p-methylthiobenzamide-S-oxide (PMTBSO), from rat plasma using a solid-phase extraction technique. In this way, PMTB and PMTBSO can be extracted from 0.5 ml of plasma and separation achieved by an ODS analytical column in as little as 9 min. The mobile phase used was methanol-water (55:45, v/v) and the wavelength for detection was 290 nm. The limits of detection in plasma were 15 ng/ml for PMTB and 33 ng/ml for PMTBSO; the absolute recovery from spiked plasma samples was greater than 84.4% for both compounds and the internal standard. The method was linear throughout the range used with correlation coefficients greater than 0.969. The intra-day accuracy ranged from 1.52 to 15.23% relative error for the PMTB concentration range 151-3025 ng/ml; accuracy of 4.97% or less was obtained for PMTBSO concentrations of 1672-20,068 ng/ml. The intra-day precision (coefficient of variation) of the procedure was found to be no greater than 5.28% for PMTB and 7.9% for PMTBSO. Inter-day accuracy and precision measurements were similar.     

Urinary testosterone measurement by gas chromatography after solid-phase extraction and high-performance liquid chromatography.

A method was developed for the rapid determination of testosterone in urine. The procedure consists of solid-phase extraction (SPE) followed by high-performance liquid chromatographic (HPLC) clean-up before gas chromatographic determination. Recovery was evaluated by adding [3H]testosterone (10(4) cpm) to urine samples; the mean recovery of radioactivity after SPE and HPLC was 82%. Precision was estimated by repeated measurement of testosterone in four different urine samples; the coefficient of variation was 7.9% (95% confidence limits 6.1-11.4%). Accuracy was evaluated by standard addition and dilution assays; a linear relationship was found between the expected and observed values (r2 = 0.982). The method is rapid, effective and suitable for routine analysis.     

Determination of carbamate pesticides using micro-solid-phase extraction combined with high-performance liquid chromatography

We describe a simple and sensitive porous polypropylene membrane-protected micro-solid-phase extraction (μ-SPE) approach for the sample preparation and determination of carbamate pesticides in soil samples by high-performance liquid chromatography. The μ-SPE device consisted of C₁₈ sorbent held within a porous polypropylene envelope. In order to achieve optimum performance, several extraction parameters were optimized. Under the most favorable conditions, the extraction efficiency of the μ-SPE was very high, with detection limits in the range of 0.01–0.40 ng g⁻¹. This is more than two orders of magnitude lower than the limits obtained by the United States Environmental Protection Agency Methods 8321A and 8318. A linear relationship was obtained for each analyte in the range of 2 and 200 ng g⁻¹. The relative standard deviation for the analysis of aged soil samples spiked at 5 ng g⁻¹ was ≤11%. The reproducibility of separate μ-SPE device used for experiments was satisfactory (relative standard deviations ranged from 4 to 11%), indicating that the method is reliable for routine environmental analysis.     

New materials for solid-phase extraction and multiclass high-performance liquid chromatographic analysis of pesticides in grapes

Sample preparation procedures which included the use of new aminopropyl (NH2) and octadecyl (C18) solid-phase extraction (SPE) sorbents are proposed for the simultaneous multiclass determination of the fungicide benomyl and of the herbicides tebuthiuron, diuron, simazine, atrazine, and ametryn in grapes, using single wavelength high-performance liquid chromatography. Sorbent preparation uses a fast, easy, and effective procedure to obtain silica-based materials, made by depositing polysiloxanes on a silica support followed by thermal immobilization. Recovery results of the compounds, after elution from the SPE cartridges, indicate that the most efficient system employed silica loaded with 40% of an aminofunctional polydimethylsiloxane as sorbent, using dichloromethane:methanol (95:5, v/v) as eluent. Method validation, carried out in agreement with International Conference on Harmonization directives, was performed at three fortification levels (100, 200, and 1000 microg kg(-1)). Limits of detection and quantification show that the method developed can be used to detect the pesticides at concentrations below the maximum residue levels established by Codex Alimentarius, the US Environmental Protection Agency, the European Union, and Brazilian legislation.