Negatively charged micelles directed synthesis of snow-ball flower like superparamagnetic Ni nanoparticles and investigation of their properties

Snow-ball flower like Ni nanoparticles have been synthesized using negatively charged micelles. Negatively charged micelles incorporate the Ni⁺² onto its head group by electrostatic attraction and again a surfactant layer is arranged on positively charged Ni and thus in a repetitive way layer-by-layer a snow-ball flower like structure is formed. After reduction of Ni⁺² to Ni atom by sodium borohydride and hydrated hydrazine the Ni clusters (3 nm) are formed and confined in micelles in snow-ball flower like pattern. The sizes of these nanoflowers are of 30 nm order. The particles are superparamagnetic in nature with blocking temperature about 117 K.     

Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction

Silver nanoparticles were synthesized by UV irradiation of [Ag(NH₃)₂]⁺ aqueous solution using poly(N-vinyl-2-pyrrolidone) (PVP) as both reducing and stabilizing agents. The formation of silver nanoparticles was confirmed from the appearance of surface plasmon absorption maxima around 420 nm. It was found that the formation rate of silver nanoparticles from Ag₂O was much quicker than that from AgNO₃, and the absorption intensity increased with PVP concentration as well as irradiation time. The maximum absorption wavelength (λ_max) was blue shift with increasing PVP content until 8 times concentration of [Ag(NH₃)₂]⁺ (wt%). The transmission electron microscopy (TEM) showed the resultant particles were 4–6 nm in size, monodisperse and uniform particle size distribution. X-ray diffraction (XRD) demonstrated that the colloidal nanoparticles were the pure silver. In addition, the silver nanoparticles prepared by the method were stable in aqueous solution over a period of 6 months at room temperature (25 °C).     

Reduced N-methyl-pyridylethynyl porphyrins exhibit strong near-IR absorptions

Porphines bearing two N-methyl-4-pyridylethynyl substituent reversibly undergo two one-electron reductions at room temperature. The anion radicals and di-anions show diminished visible bands (450 nm and 600–700 nm) and intense absorptions in the 800-nm and 1100-nm region, respectively. Some of the near-IR bands have extinction coefficients greater than 1.5 × 10⁵ M⁻¹ cm⁻¹.     

Photodegradation of poly(neopentyl isophthalate) part I: Laboratory and outdoor conditions

In this paper the mechanisms of photodegradation of poly(neopentyl isophthalate) (PNI) in laboratory (Suntest XXL+, λ > 300 nm) and outdoor conditions are compared. Changes in the chemical composition were studied with ATR-FTIR, SEC and MALDI-ToF MS. Furthermore, the results were compared with data presented in our previous paper on PNI coatings that were aged in the UVACUBE (λ > 254 nm). Two main aspects of photodegradation of PNI are addressed in the present paper: the influence of different wavelengths and the comparison of laboratory and outdoor exposure regarding the mechanism of degradation. Under short (λ > 254 nm) and long (λ > 300 nm) wavelength irradiation similar products of degradation are formed. However, the presence of short wavelength radiation dramatically accelerates the overall rate of photodegradation of PNI. UV light absorption calculations confirm this experimentally found acceleration. Exposure of PNI in laboratory and outdoor conditions, both with wavelengths λ > 300 nm resulted in similar degradation products in the initial stage of ageing.     

Fabrication of mesoporous SiO2–C–Fe3O4/γ–Fe2O3 and SiO2–C–Fe magnetic composites

A synthetic method for the fabrication of silica-based mesoporous magnetic (Fe or iron oxide spinel) nanocomposites with enhanced adsorption and magnetic capabilities is presented. The successful in situ synthesis of magnetic nanoparticles is a consequence of the incorporation of a small amount of carbon into the pores of the silica, this step being essential for the generation of relatively large iron oxide magnetic nanocrystals (10 ± 3 nm) and for the formation of iron nanoparticles. These composites combine good magnetic properties (superparamagnetic behaviour in the case of SiO₂–C–Fe₃O₄/γ–Fe₂O₃ samples) with a large and accessible porosity made up of wide mesopores (>9 nm). In the present work, we have demonstrated the usefulness of this kind of composite for the adsorption of a globular protein (hemoglobin). The results obtained show that a significant amount of hemoglobin can be immobilized within the pores of these materials (up to 180 mg g⁻¹ for some of the samples). Moreover, we have proved that the composite loaded with hemoglobin can be easily manipulated by means of an external magnetic field.     

Isoconversional kinetics of degradation of polyvinylpyrrolidone used as a matrix for ammonium nitrate stabilization

Thermogravimetric analyzer (TGA) has been applied to measure the kinetics of the thermal degradation of virgin polyvinylpyrrolidone (PVP) and a phase stabilized PVP–ammonium nitrate (AN) material. The PVP–AN samples have been prepared by using 20 wt.% of AN and PVP of three different molecular weights. Virgin PVP undergoes a major mass loss in the region 380–550 °C leaving a small amount of nonvolatile residue. The application of an advanced isoconversional method to the respective degradation process demonstrates that its effective activation energy increases from 70 kJ mol⁻¹ to a plateau value at 250–300 kJ mol⁻¹, which is independent of the molecular weight. The PVP–AN materials lose spontaneously 20% of their mass on heating above the glass transition temperature of the PVP matrix (160–180 °C). After the escape of AN, the remaining PVP matrix degrades in the same temperature region as virgin PVP, however, the effective activation energy of this degradation is 150–200 kJ mol⁻¹.     

Electrochemical properties of polyaniline in p-toluene sulfonic acid solution

Polyaniline was deposited potentiodynamically on a stainless steel substrate in the presence of an inorganic acids (sulfuric acid). The electrochemical characterization of the electrode was carried out by means of cyclic voltammetry and electrochemical impedance spectroscopy in the organic acids (p-toluene sulfonic acid) solution. The results show that polyaniline has a high specific capacitance of 431.8 F g⁻¹ at 1 mV s⁻¹, high coulombic efficiency of 95.6% at 20 mV s⁻¹, and exhibits a high reversibility. This indicates the promising feasibility of the polyaniline used as an electrochemical capacitor material in the electrolyte of p-toluene sulfonic acid solution especially at high charge–discharge process.     

Interaction and photodynamic activity of cationic porphyrin derivatives bearing different patterns of charge distribution with GMP and DNA

The interaction of amphiphilic cationic porphyrins, containing different patterns of meso-substitution by 4-(3-N,N,N-trimethylammoniumpropoxy)phenyl (A) and 4-(trifluoromethyl)phenyl (B) groups, with guanosine 5′-monophosphate (GMP) and calf thymus DNA have been studied by optical methods in phosphate buffer solution. The properties of these synthetic porphyrins were compared with those of representative standard of anionic 5,10,15,20-tetra(4-sulphonatophenyl)porphyrin (TPPS₄⁴⁻) and cationic 5,10,15,20-tetra(4-N,N,N-trimethylammonium phenyl)porphyrin (TMAP⁴⁺). Stable complexes with GMP were found for cationic porphyrins, except for monocationic AB₃⁺. The binding constant (K_GMP  10⁴ M⁻¹) follows the order: A₃B³⁺  ABAB²⁺ > A₄⁴⁺  TMAP⁴⁺. Also, interaction with DNA was observed for all evaluated cationic porphyrins. For these related cationic porphyrins, the binding constant (K_DNA  10⁵ M⁻¹) increases with the number of cationic charges. On the other hand, the photodynamic activity of porphyrins was analyzed in solution of GMP and DNA. Monocationic AB₃⁺ is a less effective sensitizer to oxidize GMP in comparison with the other cationic porphyrins, in agreement with the lack of detected interaction with this nucleotide. The electrophoretic analysis of DNA indicates that photocleavage takes place when the samples are exposed to photoexcited tricationic and tetracationic porphyrins. In the presence of sodium azide the DNA decomposition was diminished. Also, reduction in the DNA photocleavage was observed under anoxic condition, indicating that oxygen is essential for DNA photocleavage sensitized by these cationic porphyrins. In addition, an increase in DNA degradation was not observed in deuteriated water. Therefore, an important contribution of type I photoreaction processes could be occurring in the DNA photodamage sensitized by these cationic porphyrins. These results provide a better understanding of the characteristics needed for sensitizers to produce efficient DNA photocleavage.     

Synergetic effect of vacuum-plasma and solution-colloidal seeding process for the fabrication of nanostructured barrier layers

A vacuum-plasma surface pre-treatment was incorporated into a previously developed solution (SC1)-colloidal seeding process for the electroless plating of nanostructured barrier layers on the SiO₂ and Black Diamond^™ dielectric layers that are used in ultralarge scale integrated circuits. The synergetic effect of the vacuum-plasma and subsequent SC1 treatments is to modify both of the dielectric surfaces into hydroxyl-terminated and related superhydrophilic bonds, thereby significantly increasing (by 20-fold) the population density of metallic seeds that have sizes of only 4 nm. With these densely populated, refined seeds, nanostructured barrier layers of a thickness of 10 nm, which were previously unachievable, were fabricated.     

Synthesis, characterization and radiolytic properties of bis(oxalato)borate containing ionic liquids

Previously unreported bis(oxalato)borate (BOB) ionic liquids (ILs) containing imidazolium, pyridinium, and pyrrolidinium cations were prepared from the corresponding halide salts by reaction with sodium bis(oxalato)borate (NaBOB), and their properties are reported. Pulse radiolysis experiments revealed that the BOB anion scavenges solvated electrons with rate constants of 3×10⁸ M⁻¹ s⁻¹ in the ionic liquid C₄mpyrr NTf₂ and 2.8×10⁷ M⁻¹ s⁻¹ in water. This reactivity indicates that BOB ILs may be too sensitive to be used as neat solvents for nuclear separations processes in high radiation fields but may still be useful for preventing criticality while processing relatively “cold” fissile actinides.     

Ultrafast dynamics of heat flow across molecules

An ultrafast flash thermal conductance apparatus is used to study heat flow through aliphatic and aromatic molecules arranged in self-assembled monolayers (SAMs). The apparatus consists of a thin metal film which can be flash-heated by many hundreds of degrees in 1 ps using a femtosecond pulse. Heat flow from the metal surface into the SAM molecules is detected using vibrational sum-frequency generation (SFG) spectroscopy. The SAMs studied were alkanethiolates (AT) ranging from C6 to C24, benzenethiolate (BT) and benzylmercaptide (BMT). SFG in the CH-stretch region selectively probes transitions of the terminal methyl groups of AT and the CH moiety at the 4-position of the phenyl ring of BT and BMT (opposite the thiolate-surface bond). The SFG signal is sensitive to temperature-jump induced thermal disorder of the SAM and also to vibrational frequency shifts induced by the changing intramolecular vibrational populations. The SFG probe functions as a thermometer, and this thermometer is 1.5 Å thick with a response time of 1 ps. In the AT chains, a study of the length dependence is used to determine the rate heat flows across the metal–SAM interface and the rate of heat flow through the AT chains. The interface thermal conductance is 220 GW m⁻² s⁻¹. The AT molecular conductance is 50 pW K⁻¹ or 0.3 eV s⁻¹ K⁻¹. Heat flow through the AT chains is ballistic with a velocity of 1 km/s. Heat flow into BMT is slower than in BT because BMT has one additional methylene linker group. The BT and BMT structures evidence a thermally-initiated surface rearrangement occurring in a few tens of picoseconds. These SAMs are strained and the phenyl rings cannot adopt the most stable staggered herringbone structure. After the T-jump, the SAM molecules have enough freedom to relax into more favorable configurations.     

Enhanced tungstate electrochromism via formation of transparent conductive networks

Indium tin oxide (ITO) nanopowder was added to a polymer film containing WO₃ · H₂O particles to enhance electron conductivity and complimentary Li ion kinetics in an electrochromic device. Film conductivity increased dramatically with ITO content, suggesting the formation of conductive ITO networks in the film. The improved electron conductivity leads to a substantial increase of the effective Li⁺ ion diffusion coefficient in the composite film, from 10⁻¹¹ to 10⁻⁹ cm²/s. Electrochromic contrast studies revealed that the presence of the ITO networks leads to enhanced blue/green color contrast.     

Molecular fine structure and transition dipole moment of NO2 using an external cavity quantum cascade laser

Rotational vibrational fine structure and transition dipole moment of NO₂ is measured using Doppler free saturation spectroscopy with an external grating cavity quantum cascade laser (QCL). The QCL wavelength is calibrated using a 310 cm long internally coupled Fabry–Perot interferometer. We obtain a frequency splitting of 139.68 ± 0.06 MHz (0.0047 cm⁻¹) between the spin doublets (17) of 000 → 001 transition of NO₂. The resolution of the QCL based saturation spectrometer is limited by the QCL linewidth of 3.99 MHz ( 0.00013 cm⁻¹) deduced from the half width of the Lamb dips. The Lamb dip spectroscopy is utilized to obtain a vibrational dipole moment of 0.37 Debye for the (17) transitions.     

Correlation between properties of a solid sample and laser-induced plasma parameters

To investigate the influence of mechanical properties of a solid sample on the laser-induced plasma parameters (temperature and mass ablated) a number of aluminum–lithium alloys and lithium ferrites with different microstructure and composition have been studied. The specific approach to estimate excitation temperature for low-resolution emission spectra has been developed. The main limitations of this approach were discussed on the basis of comparison with the energy width of several multiplets. Overall uncertainties for temperature calculation were evaluated by taking into account the accuracy of Einstein's coefficients and errors of the proposed multiplets method. The temporal evolution of laser plasma during the evaporation of these materials was studied. Extremely high value of the Li I excitation temperature has been estimated to be T > 10⁵ K for the annealed ferrite ablation, in contrast to the temperature T  1.5 · 10⁴ K for non-annealed ferrite. Only for ablation of annealed ferrite the Li II emission line at 548.4 nm was observed. It means that this laser-induced plasma was the hottest. In the case of alloys, the temperature calculated by using Li I transitions was proportional to the microhardness of the solid samples. The negative correlation between crater volume/opto-acoustic signal and alloy microhardness was observed. At the first pulses the mechanical properties of the alloys didn't correlate with the ablated mass, while the maximal correlation coefficients were observed after ablation by 10 or 50 consequent laser pulses.     

Simulation of equivalent weight dependence of Nafion morphologies and predicted trends regarding water diffusion

Microphase separation within hydrated Nafion^® membranes was simulated using Dissipative Particle Dynamics (DPD). Morphologies were obtained at branching densities corresponding with equivalent weights ranging from 800 to 1400 (g/mole SO₃) and water percentage volume contents ([H₂O]) varying between 10% and 30%. All cases showed pronounced microphase separation involving a hydrophobic Teflon phase and a hydrophilic phase in which water is associated with SO₃ groups that are located near the phase boundaries. Pore morphologies were found to depend strongly on water content and branching density. The average pore radius (R_pore) and the distance between the pores (D_cl-cl) were found to increase with water content obeying the relations R_pore = 1.3 + α[H₂O] (nm), and D_cl-cl = 3.2 + β[H₂O] (nm). The values of the expansion coefficients α and β decrease linearly with branching density with α = 5.3 × 10⁻⁵ × (EW-450) and β = 1.3 × 10⁻⁴ × (EW-450) nm/vol%. For decreasing branching density the pores obtain a more spherical character. The consequence of this on water diffusion is estimated by employing Monte Carlo trajectory calculations in which we assume that water movement is confined within the hydrophilic phase and local water mobility to be equal to that of pure water. The estimated diffusion constants increase linearly with branching density (i.e. linear decrease with equivalent weight). Experimental water diffusion constants obtained from literature for Nafion1100 membrane are in good agreement with our calculations. A counterintuitive picture evolves in which smaller pores lead to enhanced water diffusion.     

Cathodic electrophoretic deposition of manganese dioxide films

Cathodic electrophoretic deposition (EPD) method has been developed for the deposition of manganese dioxide films. It was shown that phosphate ester (PE) is an effective charging additive, which provides stabilization of manganese dioxide nanoparticles in suspensions. The influence of PE concentration and deposition voltage on the deposition efficiency has been studied. EPD has been utilized for the fabrication of porous nanostructured films with thickness in the range of 0.5–20 μm for application in electrochemical supercapacitors (ES). Cyclic voltammetry and chronopotentiometry data for the films tested in the 0.1 M Na₂SO₄ solutions showed capacitive behavior in the voltage window of 1 V. The highest specific capacitance (SC) of 377 F g⁻¹ was obtained at a scan rate of 2 mV s⁻¹. The SC decreased with increasing film thickness and increasing scan rate in the range of 2–100 mV s⁻¹. The deposition mechanism, kinetics of deposition and charge storage properties of the films are discussed.     

Efficient hydrogen peroxide generation from organic matter in a bioelectrochemical system

Hydrogen peroxide (H₂O₂) is an important industrial chemical, but its current production methods are highly energy-intensive. This study presents a novel process for the production of H₂O₂ based on the bioelectrochemical oxidation of wastewater organics at an anode coupled to the cathodic reduction of oxygen to H₂O₂. At an applied voltage of 0.5 V, this system was capable of producing 1.9 ± 0.2 kg H₂O₂/m³/day from acetate at an overall efficiency of 83.1 ± 4.8%. As most of the required energy was derived from the acetate, the system had a low energy requirement of 0.93 kWh/kg H₂O₂.     

Electrochemical kinetics and cycling performance of nano Li[Li0.23Co0.3Mn0.47]O2 cathode material for lithium ion batteries

Li[Li_0.23Co_0.3Mn_0.47]O₂ cathode material was prepared by a sol–gel method. The material had a primary particle size of about 100 nm, covered by a 30 Å of Li₂CO₃ layer. The material showed promising electrochemical performance when cycled up to 3C rate. The electrochemical kinetics of the first charge was much slower than that of the second charge, due to the complex electrochemical process which involved not only Li⁺ diffusion but also release of oxygen. By taking account of this, the material was pre-charged very slowly (C/50) in the first cycle. This led to excellent electrochemical performance in the following cycles. For instance, the 1C-rate capacity increased to 168 mA h g⁻¹ after 50 cycles, comparing with the 145 mA h g⁻¹ obtained without pre-charging.     

Simultaneous determination of chloride, nitrate and sulphate in vegetable samples by single-column ion chromatography

A new ion chromatography method is described for the simultaneous determination of Cl⁻, NO₃⁻ and SO₄²⁻, using a selected eluent 1.3-mM sodium gluconate/1.3-mM borax (pH 8.5). The extraction methods of Cl⁻, NO₃⁻, SO₄²⁻ in vegetables are studied. The determination limits of Cl⁻, NO₃⁻, SO₄²⁻ are 0.17 μg/ml, 0.63 μg/ml and 0.81 μg/ml. The linear ranges are 060 μg/ml, 090 μg/ml and 090 μg/ml. The relative S.D. are <2.5%. The mean recoveries of Cl⁻, NO₃⁻, SO₄²⁻ in vegetables range from 97.0 to 104%.     

Effect of high rates of mass transport on oxygen reduction at copper electrodes: Implications for aluminium corrosion

The reduction of oxygen at copper microelectrodes (25 μm diameter) in aqueous solution (pH 7) has been studied under conditions of high mass transport, similar to those experienced by μm sized copper-containing inclusions in aluminium alloys during corrosion. Contrary to previous studies at copper electrodes operating at lower mass transport rates, oxygen reduction limiting currents show an apparent number of electrons which decrease towards 2 as the mass transport rate increases (mass transfer coefficients up to ca. 0.55 cm s⁻¹), rather than a 4-electron process. These new data suggest that the treatment of oxygen reduction as a 4-electron transfer process at micron and smaller-sized copper intermetallics in aluminium alloys may require revision.