Green diastereoselective synthesis of highly functionalised trifluoromethylated γ-lactone phosphonate esters bearing a thioester or ketothiophene

A facile diastereoselective synthesis of highly functionalised 3-(1-diphenylphosphonylethyl)butyrolactone analogues, 3a-c is achieved from the reaction of dialkyl acetylenedicarboxylates, 2a,b, with thiolated and trifluoromethylated-1,3-diones, CH acids, 1a,b, in the presence of triphenyl phosphite. The resulting products, 3a-c, are obtained in high yields and characterised by ¹H/¹³C, ¹⁹F, ³¹P NMR and X-ray crystallography.     

Supramolecular nanostructured assemblies of different types of porphyrins with fullerene using TiO2 nanoparticles for light energy conversion

TiO₂ nanoparticles were modified with porphyrin derivatives, 5-[4-benzoic acid]-10,15,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (Ar-H₂P-COOH), 5-[4-benzoic acid]-10,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (H-H₂P-COOH), and 5,10,15,20-tetra[4-benzoic acid]-21H,23H-porphyrin (H₂P-4COOH). The porphyrin-modified TiO₂ nanoparticles were deposited on nanostructured OTE/SnO₂ electrode together with nanoclusters of fullerene (C₆₀) in acetonitrile-toluene (3/1, v/v) using an electrophoretic deposition technique to afford the porphyrin-modified TiO₂ composite electrode denoted as OTE/SnO₂/(porphyrin-modified TiO₂ nanoparticle+C₆₀)_n. The porphyrin-modified TiO₂ composite electrodes have efficient light absorbing properties in the visible region, exhibiting the photoactive response under visible light excitation using redox couple. The incident photon-to-photocurrent efficiency (IPCE) values of supramolecular nanostructured electrodes of porphyrin-modified TiO₂ nanoparticles with fullerene [OTE/SnO₂/(Ar-H₂P-COO-TiO₂+C₆₀)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂+C₆₀)_n] are much larger than those of the reference systems of porphyrin-modified TiO₂ nanoparticles without C₆₀ [OTE/SnO₂/(Ar-H₂P-COO-TiO₂)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂)_n]. In particular, the maximum IPCE value (41%) is obtained for OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n under the bias potential of 0.2 V versus SCE. This indicates that the formation of supramolecular complexes between porphyrins and fullerene on TiO₂ nanoparticles plays an important role in improvement of the light energy conversion properties.     

Diels-Alder cycloaddition of 2-azadienes to methyl 2-(2,6-dichlorophenyl)-2H-azirine-3-carboxylate in the synthesis of methyl 4-oxo-1,3-diazabicyclo[4.1.0]heptane-6-carboxylates

A number of fused 4-oxo-1,3-diazabicyclo[4.1.0]heptane-6-carboxylates, a new type of compound, have been obtained by Diels-Alder cycloaddition between nucleophilic 2-azadienes and an electrophilic 2H-azirine. The reactions are completely endo- and regioselective, the azirine being added by its less hindered face to the diene. There are two isomers 7 and 8 formed from dienes 1 due either to isomerization of the cycloadducts 7 and 8 or by isomerization of the CN bond of the diene during the reaction. The isomer 10 is formed from diene 2e, and a single diastereoisomer structure 4a-i is formed from dienes 11. Some pyrimidones 8a, 7c/8c, 7e, 10, 11d have been hydrolyzed leading to functionalised aziridines 12, 13 and 15.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

1,2- versus 1,3-Silyl migration in the reaction of acylsilanes with silyl-substituted carbanions

The Peterson olefination of acylsilanes 1 by silylated carbanions 5,14 to give alkenes 13,17 via a 1,3-silyl shift is favored by the stabilization of the carbanion intermediate 16 through two sulfide units versus one as in 12, while a combination of DMPS on 1 and TBS on 14 leads to 1,2-migration product 15.     

Intramolecular Heck reaction strategy for the synthesis of functionalised tetrahydroanthracenes: a facile formal total synthesis of the linear abietane diterpene, umbrosone

Rapid annulation employing an intramolecular Heck reaction yielded the functionalised 1,1,10-trimethyl-6-methoxy-1,2,3,4-tetrahydroanthracene 4a, a key intermediate for the linear diterpenoid quinone umbrosone (1), and the related compounds 4b-d. A similar strategy was also successfully adopted for the synthesis of the 9-methyl tetrahydroanthracene ester 5 and the tetrahydrodibenzo[a,d]cycloheptene ester 6.     

Functionalised linear and cross-linked polystyrenes from chloromethylated polymers through their organolithium derivatives

The lithiation of soluble (linear) and insoluble (cross-linked) chloromethylated polystyrene (1 and 15, respectively) with lithium and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 10 mol%) followed by reaction with different electrophiles leads to the formation, after final hydrolysis, of the corresponding functionalised polymers 2-12 and 16-32, respectively.     

Synthesis of chiral 4-hydroxy-2,3-unsaturated carbonyl compounds from 3,4-epoxy alcohols by oxidation: application in the formal synthesis of macrosphelide A

An interesting transformation during the oxidation of 3,4-epoxy alcohols 1a-d, derived from the corresponding homoallylic alcohols, led to the formation of 4-hydroxy-2,3-unsaturated carbonyls 2a-d in very good yields. One of these products 2c was transformed into the functionalised carboxylic acid 5, an advanced stage intermediate from which the total synthesis of macrosphelide A has been reported.     

SEAr-SNAr couplings of indolizines and related pyrrole derivatives with superelectrophilic nitrobenzoxadiazoles

The nucleophilic aromatic substitutions of 7-chloro-4,6-dinitrobenzofurazan (DNBZ-Cl) and 7-chloro-4,6-dinitrobenzofuroxan (DNBF-Cl) with a series of differently substituted indolizines (5a-f) and a series of dihyropyrroloisoquinolines (11a-f) have been investigated. In accord with previous reports emphasizing the superelectrophilic character of these compounds in σ-complexation processes, DNBZ-Cl and DNBF-Cl react very readily and quantitatively with the weak carbon nucleophiles 5a-f and 11a-f at room temperature in acetonitrile. In the case of DNBZ-Cl, the resulting products (7Z,a-f and 12Z,a-f) are those expected from the displacement of the chlorine atom through a S_EAr-S_NAr mechanism. A significant result is that these compounds, despite the lack of coplanarity of the two rings, are characterized by an intense intramolecular charge transfer between the donor pyrrole-type moiety and the electron-deficient acceptor DNBZ moiety. Contrasting with this behaviour, the DNBF-Cl reactions show a totally different pattern, proceeding with loss of the N-oxide functionality and expansion of the pyrrole moiety to afford stable zwitterionic spiro adducts (8F,a-f and 13F,a-f) of a so far unknown type. Rapid NMR recordings have revealed that the formation of these adducts occurs after initial formation of the expected substitution products 7F,a-f and 12F,a-f. A mechanism accounting for the overall rearrangement leading to the spirobenzofurazan adducts is suggested. It is based on an initial nucleophilic attack of the oxygen atom of the N-oxide functionality at the electron-deficient and strongly olefinic C-C coupling bond generated by the aforementioned intramolecular charge transfer. This results in the formation of an unstable five-membered isoxazole ring whose decomposition goes along with loss of the N-oxide functionality and enlargement of the pyrrole moiety into a pyridine one. Also discussed are the factors accounting for the high thermodynamic stability of the spiro adducts, and their relevance to the stability of previously reported spiro adducts.     

Formation of water-soluble sulfonated azacalix[4]arenes from cyanuric chloride

Addition of cyanuric chloride 2 (2,4,6-trichlorotriazine) to 4,6-diaminobenzene-1,3-disulfonic acid 1 gives a bis-triazine 3 which may be cyclised with diaminoarenes to yield water-soluble azacalix[4]arenes 5a-d. Alternatively, double substitution of chloride from the bis-triazine 3 yields new bis-triazine derivatives which may likewise be cyclised to functionalised azacalixarenes bearing functionalised side chains.     

Synthesis of 1,1-disubstituted tetrahydro-β-carbolines from 2-methyleneaziridines

Ring opening of indole functionalised methyleneaziridines (3a-c, 7) with alcohols in the presence of boron trifluoride etherate leads to the formation of 1,1-disubstituted tetrahydro-β-carbolines in moderate to good yields (37-83%).     

Phase transitions in K3AlF6

Phase transitions in the elpasolite-type K₃AlF₆ complex fluoride were investigated using differential scanning calorimetry, electron diffraction and X-ray powder diffraction. Three phase transitions were identified with critical temperatures , and . The α-K₃AlF₆ phase is stable below T₁ and crystallizes in a monoclinic unit cell with a=18.8588(2)Å, b=34.0278(2)Å, c=18.9231(1)Å, β=90.453(1)° (a=2a_c−c_c, b=4b_c, c=a_c+2c_c; a_c, b_c, c_c—the basic lattice vectors of the face-centered cubic elpasolite structure) and space group I2/a or Ia. The intermediate β phase exists only in very narrow temperature interval between T₁ and T₂. The γ polymorph is stable in the T₂<T<T₃ temperature range and has an orthorhombic unit cell with a=36.1229(6)Å, b=17.1114(3)Å, c=12.0502(3)Å (a=3a_c−3c_c, b=2b_c, c=a_c+c_c) at 250 °C and space group Fddd. Above T₃ the cubic δ polymorph forms with a_c=8.5786(4)Å at 400 °C and space group . The similarity between the K₃AlF₆ and K₃MoO₃F₃ compounds is discussed.     

Complexing properties of two benzocrown-ether moieties arranged at a cyclobutane ring system

Biscrown ethers 2a-c and 3a-c arranged at a cyclobutane ring were prepared by intermolecular [2+2] photocycloaddition of vinylated benzocrown ethers. The complexing behavior of 2a-c toward alkali metal cations was evaluated by ESI-MS analysis, liquid-liquid extraction, and the comparison of complexing stability constant. An intramolecular sandwich-type 1:1 (host/guest) complexation was observed by ESI-MS analysis in the competitive system where 2a-Na⁺, 2b-K⁺, and 2c-Cs⁺ were formed selectively. In the liquid-liquid extraction, however, 2a hardly extracted any cation, while both 2b and 2c efficiently extracted larger cations such as K⁺, Rb⁺, and Cs⁺. It was found that the complexing stability constant of 2a-Na⁺ is lower than that of benzo-15-crown-5-Na⁺ though extraordinarily high values were obtained for 2b-K⁺ and 2c-Cs⁺ complexes compared with those of 18-crown-6-K⁺ and dibenzo-24-crown-8-Cs⁺ complexes, respectively. Hence, the excellent complexing ability was achieved by using the cyclobutane ring, which strongly preorganized two benzocrown-ether moieties for the larger alkali metal cations.     

Regiochemistry in the reductive opening of phthalan derivatives

The lithiation of phthalan derivatives 4, 9 and 12 with an excess of lithium in the presence of a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB) in THF at −78 °C gives dianionic intermediates 5, 10 and 13, respectively, which by reaction with different electrophiles [H₂O, t-BuCHO, Me₂CO, (EtO)₂CO] at the same temperature, followed by hydrolysis, leads to regioselective functionalised naphthalenes 7, and biphenyls 11 and 14. The reductive opening takes place with high or total regioselectivity and can be explained considering the electron density in the dianion or in the radical anion, which are formed previous to the carbon-oxygen bond excision. The lithiation of the dihydrofurophthalan derivative 18 with the same reaction mixture but at higher temperature (0 °C) leads to intermediates 19 and 20, resulting from a single and a double reductive cleavage, respectively, which after addition of H₂O and benzaldehyde as electrophiles gives a mixture of compounds 21 and 22.     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

Total Synthesis of Amphidinolide E and Amphidinolide E Stereoisomers

Four amphidinolide E stereoisomers, amphidinolide E (1), 2-epi-amphidinolide E (2), 19-epi-amphidinolide E (3), and 2-epi-19-epi-amphidinolide E (4), have been synthesized via the judicious union of aldehyde 5, allylsilanes 7 or 8, acids 9 or 10, and vinylstannane 6. The C19 stereocenters of the C19 epimeric allylsilanes 7 and 8 were introduced via crotylboration reactions early in the synthesis. [3+2] Annulation reactions of aldehyde 5 with allylsilanes 7 and 8 were employed to set the core tetrahydrofuran units of 1-4. Finally, the C2 stereocenter was installed by esterification using acid 9, without incident, or with acid 10, in which case an unexpected and completely stereoselective inversion of C2 occurs.     

Novel β-lactam condensed 3-thiaquinolines: an efficient synthesis and structural characterization

Quinoline analog 2-aryl-4H-3,1-benzothiazine derivatives 8-13, obtained by the condensation of o-aminobenzyl chloride 1 with substituted thiobenzamides 2-7, were transformed to azeto[2,1-a][3,1]benzothiazin-1-one derivatives 18-23a,b,c and 24d,e by reaction with the corresponding substituted acetyl chlorides 14-17 in the presence of triethylamine. The structures of the new molecules were determined by NMR spectroscopy and electron ionization (EI) mass spectrometry. The typical EI⁺ mass spectrometric fragmentations of 8-13 and 18-23a,b,c and 24d,e are discussed in detail.     

Heavy analogues of the 6π-electron anionic ring systems: Cyclopentadienide ion and cyclobutadiene dianion

The heavy analogues of the anionic 6π-electron systems, lithium 1,2-disila-3-germacyclopentadienide 2⁻ · [Li⁺(thf)], 1,2-disila-3,4-digerma- and 1,2,3,4-tetrasilacyclobutadiene dianions 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], were synthesized by the reduction of the neutral precursors 1, 3 and 4, respectively. 2⁻ · [Li⁺(thf)], the heavy analogue of the cyclopentadienide ion, is an aromatic compound, whereas 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], the heavy analogues of the cyclobutadiene dianion, are both non-aromatic.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.     

Synthesis of naturally occurring bioactive butyrolactones: maculalactones A-C and nostoclide I

Starting from citraconic anhydride (13), a simple multistep (9-10 steps) synthesis of naturally occurring butyrolactones maculalactone A (3), maculalactone B (1), maculalactone C (2) and nostoclide I (4) have been described with good overall yields via dibenzylmaleic anhydride (20) and benzylisopropylmaleic anhydride (27). The two anhydrides 20 and 27 were prepared by S_N2′ coupling reactions of appropriate Grignard reagents with dimethyl bromomethylfumarate (14), LiOH-induced hydrolysis of esters to acids, bromination of carbon-carbon double bond, in situ dehydration followed by dehydrobromination and chemoselective allylic substitution of bromoatom in disubstituted anhydrides 19 and 26 with appropriate Grignard reagents. The NaBH₄ reduction of these anhydrides 20 and 27 furnished the desired lactones 21 and 29, respectively. The lactone 21 on Knoevenagel condensation with benzaldehyde, furnished maculalactone B (1), which on isomerization gave maculalactone C (2). Selective catalytic hydrogenation of 1 gave maculalactone A (3). The conversion of lactone 29 to nostoclide I (4) is known.