Lithium 2,3-dihydro-1-benzothiophene-1,1-dioxide: synthesis, characterization, DFT calculations, and reactivity toward aldehydes and azomethines

The sulfonyl carbanion derived from 2,3-dihydro-1-benzothiophene-1,1-dioxide and its lithium salt has been investigated by DFT calculations. NMR and IR spectroscopic analyses showed that the lithium sulfonyl carbanion exists in solution as a monomer in equilibrium with a dimer. The lithium carbanion was treated with aldehydes and azomethynes to give chiral hydroxy and amino derivatives. The stereochemistry of the products and the diastereoselectivity of the reaction were investigated.     

Derivation of fluorine-containing pyridinedicarboxylates. III Regio-selective anion chemistry at the 2- and 4-position

In contrast of Part II of the series, 4-alkyl-2-(difluoromethyl)-6-(trifluoromethyl)-3,5-pyridinedicarboxylates, 1 , were reacted with various strength bases to effect regio-selective reaction of electrophiles at either the benzylic carbanion of the 4-position, or at the 2-(difluoromethyl)carbanion. Weaker bases up to and including potassium butoxide or lithium bis(trimethylsilylamide) effected reaction of 1 at the 4-position to produce 2 and 3 by Stobbe-type condensations of aldehydes and ketones. In similar manner carbon disulfide, carbon dioxide, alkyl halides, silyl halides, and hexachloroethane produced the highly functionalized derivatives 4-10. In contrast, use of lithium diisopropylamide and like bases selectively effected carbanion formation at the 2-position to form, with the cited electrophiles and others, substitution products 11. The latter were further derived to the highly functional materials, 12-19.     

Diastereoselective aldol reaction of zincated 3-chloro-3-methyl-1-azaallylic anions as key step in the synthesis of 1,2,3,4-tetrasubstituted 3-chloroazetidines

Zincated 3-chloro-3-methyl-1-azaallylic anions undergo a stereoselective aldol addition across aromatic aldehydes and subsequent mesylation to produce syn α-chloro-β-mesyloxyketimines, which were isolated in 80-84% yield and high diastereomeric excess (dr > 97/3) after purification via flash chromatography. The syn α-chloro-β-mesyloxyketimines were further stereoselectively reduced to give stereochemically defined 3-aminopropyl mesylates, which were cyclized to 1,2,3,4-tetrasubstituted 3-chloroazetidines containing three contiguous stereogenic centers. DFT calculations on the key aldol addition revealed the presence of a highly ordered bimetallic six-membered twist-boat-like transition state structure with a tetra-coordinated metal cyclic structure. DFT calculations revealed that chelation of both zinc and lithium cations in the transition state structure leads to the experimentally observed high syn diastereoselectivity of aldol reactions.     

Regio- and diastereoselective functionalization of (−)-cytisine

(−)-N-Benzyl cytisine has been stereoselectively substituted in moderate to high yields on its carbon 6 (Csp³ α to the pyridone nitrogen). The reaction involved the in situ trapping of the carbanion formed by reaction of lithium diisopropyl amide (LDA) and its reaction with electrophiles (alkyl, allyl, benzyl halides, non-enolizable aldehydes, and Weinreb amide). In the absence of an electrophile or with its addition after the formation of the carbanion, a dimeric structure was isolated (yield: 42%) resulting from the 1,4-addition of the carbanion on the pyridone ring of another cytisine molecule. Deprotection of the benzyl group (Olofson's reagent) allowed the formation of 6-substituted derivatives of the natural product, cytisine, a potent agonist of nicotinic receptors of subtype α₄β₂.     

Alkylation of Nitroarenes via Vicarious Nucleophilic Substitution – Experimental and DFT Mechanistic Studies

Alkylation of nitroarenes via Vicarious Nucleophilic Substitution (VNS) was tested experimentally and modelled with DFT calculations. Mechanistic studies reveal intrinsic differences between reactions of archetypal carbanion precursor PhSO₂CH₂Cl, and alkyl phenyl sulfones, in which benzenesulfinate acts as a leaving group. Accordingly, for the latter precursors steric hindrance develops at the β-elimination step, that raises energy barrier and results in the formation of byproducts.     

Highly diastereoselective one-pot synthesis of spiro[cyclopenta[a]indene-2,2'-indene]diones from 1-indanones and aromatic aldehydes

Treatment of 1-indanones with aromatic aldehydes and NaOEt in THF affords complex spiropolycyclic compounds through a four-component reaction in which two molecules of each starting compound are combined with formation of four new carbon-carbon bonds, leading to the elaboration of a new five-membered ring that bears five contiguous stereogenic centers with a well-defined relative configuration. Different amounts of a minor epimer of the main product are also formed. The presence of methoxy substituents in the indanone component and the use of aldehydes derived from pi-excedent heterocycles make the dimerization step a slower transformation. In these cases, better yields of spirodimers are obtained starting from the preformed enones. The reaction seems to take place by cross-aldol condensation, dehydration, and dimerization of the thus formed enones. The molecular mechanism of the dimerization reaction of enone 5g has been studied using DFT methods at the B3LYP/6-31G level. The dimerization takes place through a process involving a Michael addition of a carbanion, obtained by deprotonation of 5g at the 3-position, to a second molecule of 5g, followed by an intramolecular Michael addition in the corresponding intermediate. The final protonation of the resulting anion accounts for the formation of the cis-fused pentacyclic system.     

Ruthenium-catalyzed hydration of 1-alkynes to give aldehydes: insight into anti-Markovnikov regiochemistry.

The mechanism of the selective conversion of 1-alkynes to aldehydes by hydration was investigated by isolating organic and organometallic byproducts, deuterium-labeling experiments, and DFT calculations. The D-labeled acetylenic hydrogen of 1-alkyne was found exclusively in the formyl group of the resulting aldehydes. After the reaction, the presence of metal-coordinated CO was confirmed. All of the experimental results strongly suggest the involvement of a metal-acyl intermediate with the original acetylenic hydrogen also bound to the metal center as a hydride, with the next step being release of aldehyde by reductive elimination. Theoretical analyses suggest that the first step of the catalytic cycle is not oxidative addition of acetylene C [bond] H or tautomerization of eta(2)-alkyne to a vinylidene complex, but rather protonation of the coordinated 1-alkyne at the substituted carbon to form a metal-vinyl intermediate. This cationic intermediate then isomerizes to Ru(IV)-hydride-vinylidene via alpha-hydride migration of the vinyl group to the metal center, followed by attack of the vinylidene alpha-carbon by OH(-) to give the metal-hydride-acyl intermediate.     

Asymmetric Nucleophilic Monofluorobenzylation of Carbonyl Compounds: Synthesis of Enantiopure vic‐Fluorohydrins and α‐Fluorobenzylketones

Asymmetric nucleophilic monofluoroalkylation of a broad range of aldehydes with an α‐fluoro‐γ‐sulfinylbenzyl carbanion takes place with complete control of the facial selectivity at the carbanion and good to high anti‐diastereoselectivity to give easily separable mixtures of two optically pure 1,2‐fluorohydrin derivatives (up to 24:1 anti/syn). Separation and removal of the p‐tolylsulfinyl group with tBuLi provides enantiomerically pure anti‐1,2‐disubstituted‐1,2‐fluorohydrins, whereas α‐fluorobenzylketones can be obtained by desulfinylation of the mixture followed by pyridinium chlorochromate oxidation (one‐pot process).     

Asymmetric nucleophilic monofluorobenzylation of carbonyl compounds: synthesis of enantiopure vic-fluorohydrins and α-fluorobenzylketones

Asymmetric nucleophilic monofluoroalkylation of a broad range of aldehydes with an α-fluoro-γ-sulfinylbenzyl carbanion takes place with complete control of the facial selectivity at the carbanion and good to high anti-diastereoselectivity to give easily separable mixtures of two optically pure 1,2-fluorohydrin derivatives (up to 24:1 anti/syn). Separation and removal of the p-tolylsulfinyl group with tBuLi provides enantiomerically pure anti-1,2-disubstituted-1,2-fluorohydrins, whereas α-fluorobenzylketones can be obtained by desulfinylation of the mixture followed by pyridinium chlorochromate oxidation (one-pot process).     

Synthesis of chiral ortho-(p-tolylsulfinyl) benzyl ketones

(S)-ortho-(p-Tolylsulfinyl)benzyl alkyl (and aryl) ketones 1a-e were prepared in good yields by reaction of esters or nitriles with the lithium benzyl carbanion derived from 2-(p-tolylsulfinyl) methylbenzene. α-Methylbenzyl ketones 2 were prepared as ca. 1:1 diastereoisomeric mixtures by methylation of the unsubstituted ketones 1 with NaH/MeI. The use of the ethylbenzene derivative as the starting material afforded complex mixtures. The obtention of pure (S,(S)S)-2 diastereoisomers could be attained in good yields by oxidation with PCC of the alcohols (epimeric mixtures at the hydroxylic carbon) obtained from reactions of aldehydes with the lithium carbanion derived from 2-(p-tolylsulfinyl)ethylbenzene.     

A synthesis of optically active α-quaternary α-amino acids and esters by assembling three components, ketones, (R)-chloromethyl p-tolyl sulfoxide, and sodium azide, via sulfinyloxiranes

Treatment of lithium α-sulfinyl carbanion of chloromethyl p-tolyl sulfoxides with ketones at low temperature afforded adducts in almost quantitative yields, which were exposed to t-BuOK to give sulfinyloxiranes in high yields. The sulfinyloxirane was reacted with benzylamine to give α-amino aldehyde, which was oxidized with iodine in methanol to afford α-amino carboxylic ester in moderate yield. The sulfinyloxiranes were treated with sodium azide to afford α-azido aldehydes in good yields. Oxidation with NaClO₂ followed by catalytic hydrogenation of the azido group of the α-azido aldehydes gave α-quaternary α-amino acids in good overall yields. The oxidation of the azido aldehydes with iodine in methanol in the presence of KOH followed by the catalytic hydrogenation resulted in α-quaternary α-amino acid methyl esters in good yields. When these reactions were carried out starting from unsymmetrical ketones and optically pure (R)-chloromethyl p-tolyl sulfoxide, a new method for a synthesis of optically active α-quaternary α-amino acids and esters in good overall yields was realized.     

Efficient Preparation of TMSCCl2Br and Its Use in Dichlorocyclopropanation of Electron‐Deficient Alkenes

The reaction of excess TMSCl and LiCCl₂Br at low temperature is a technically simple high yield route to TMSCCl₂Br. The latter is a stable source of the dichlorobromomethide carbanion, which undergoes 1,4‐addition with cyclic nitroalkenes and (E)‐fumarates leading to dichlorocyclopropanes after bromide expulsion. For nitrostyrenes the reaction arrests at the 1,4‐addition product. Low temperature NMR spectroscopy studies and DFT calculations suggest the formation of an “ate” species [(nitronate)SiFMe₃]^? which, upon boil‐off of TMSF at 10–20 °C, yields the cyclopropane. DFT calculations also support the experimental differences between fluoride and acetate as promotors.     

Cycloaddition of Dialkylalumanyl Anion toward Unsaturated Hydrocarbons in (1+2) and (1+4) Modes

The reactivity of dialkylalumanyl anion ( 1 ) towards naphthalene, anthracene, diphenylacetylene, and (E)/(Z)-stilbenes was investigated. The compound 1 reacts with naphthalene and anthracene through (1+4) cyclization, giving Al-containing norbornadiene derivatives. In the reaction of 1 with diphenylacetylene and (E)/(Z)-stilbenes, (1+2) cyclization proceeded to form Al-C-C three-membered rings. Cyclization toward (E)- or (Z)-stilbenes solely gave a trans-cycloadduct. DFT calculations revealed that the cycloaddition of 1 with (Z)-stilbene proceeds via a single transition state with a carbanion character, which results in the selectivity towards the trans-cycloadduct.     

Diastereoselective synthesis of tetrahydrofurans via reaction of gamma,delta-epoxycarbanions with aldehydes

[reaction: see text] Hydroxymethyl-substituted tetrahydrofurans were prepared with high diastereoselectivity by reaction of the carbanion derived from 3,4-epoxybutyl phenyl sulfone with aldehydes in the presence of a mixture of lithium and potassium tert-butoxides. Initial formation of aldol-type adducts is a nondiastereoselective but reversible process; thus, subsequent formation of one main diastereoisomer is controlled by the relative rates of cyclization. The configuration of the carbon stereocenter at the oxirane ring is inverted in the course of the S(N)2 process, and two new centers are created diastereoselectively.     

Dynamics and lithium binding energies of polyelectrolytes based on functionalized poly(para-phenylene terephthalamide)

Polyelectrolyte materials are an interesting class of electrolytes for use in fuel cell and battery applications. Poly(para-phenylene terephthalamide) (PPTA, Kevlar) is a liquid crystalline polymer that, when sulfonated, is a polyelectrolyte that exhibits moderate ion conductivity at elevated temperatures. In this work, quasi-elastic neutron scattering (QENS) experiments were performed to gain insight into the effect of the presence of lithium counterions on the chain dynamics in the material. It was found that the addition of lithium ions decreases the dynamics of the chains. Additionally, the binding of lithium ions to the sulfonic acids groups was investigated by density functional theory (DFT) calculations. It was found that the local surroundings of the sulfonic acid group have very little effect on the lithium-ion binding energy. Binding energies for a variety of different systems were all calculated to be around 150 kcal/mol. The DFT calculations also show the existence of a structure in which a single lithium ion interacts with two sulfonic acid moieties on different chains. The formation of such "electrostatic cross-links" is believed to be the source of the increased tendency to aggregate and the reduced dynamics in the presence of lithium ions.     

Origin of the detrimental effect of lithium halides on an enantioselective nucleophilic alkylation of aldehydes

The effect of lithium halides on the enantioselectivity of the addition of methyllithium on o-tolualdehyde, in the presence of chiral lithium amides derived from chiral 3-aminopyrrolidines (3APLi), has been investigated. The enantiomeric excess of the resulting 1-o-tolylethanol was found to drop upon addition of significant amounts of LiCl, introduced before the aldehyde. The competitive affinity between the lithium amide, the methyllithium, and the lithium halides in THF was examined by multinuclear NMR spectroscopy and DFT calculations. The results showed that the original mixed aggregate of the chiral lithium amide and methyllithium is rapidly, totally, and irreversibly replaced by a similar 1:1 complex involving one lithium chloride or bromide and one lithium amide. While the MeLi/LiX substitution occurs with some degree of epimerization at the nitrogen for the endo-MeLi:3APLi complex, it is mostly stereospecific for the exo-type arrangements of the aggregate. The thermodynamic preference for mixed aggregates between 3APLi and LiX was confirmed by static DFT calculations: the data show that the LiCl and LiBr aggregates are more stable than their MeLi counterparts by more than 10 kcal.mol(-1) provided THF is explicitly taken into account. These results suggest that a sequestration of the source of chirality by the lithium halides is at the origin of the detrimental effect of these additives on the ee of the model reaction.     

α-Heterosubstituted phosphonate carbanions IX: diethyl 1-phenyl-1-trimethylsiloxymethane phosphonate as an acyl anion equivalent; A novel method for the preparation of α-hydroxyketones.

Diethyl 1-phenyl-1-trimethylsiloxymethane phosphonate carbanion was found to react as an effective acyl anion equivalent in the preparation of α-hydroxy ketones from aliphatic and aromatic aldehydes and ketones. A 1,4-oxygen-oxygen silicon migration was also observed.     

Lithium Choreography: Intramolecular Arylations of Carbamate‐Stabilised Carbanions and Their Mechanisms Probed by In Situ IR Spectroscopy and DFT Calculations

Deprotonation of O‐allyl, O‐propargyl or O‐benzyl carbamates in the presence of a lithium counterion leads to carbamate‐stabilised organolithium compounds that may be quenched with electrophiles. We now report that when the allylic, propargylic or benzylic carbamate bears an N‐aryl substituent, an aryl migration takes place, leading to stereochemical inversion and C‐arylation of the carbamate α to oxygen. The aryl migration is an intramolecular S_NAr reaction, despite the lack of anion‐stabilising aryl substituents. Our in situ IR studies reveal a number of intermediates along the rearrangement pathway, including a “pre‐lithiation complex,” the deprotonated carbamate, the rearranged anion, and the final arylated carbamate. No evidence was obtained for a dearomatised intermediate during the aryl migration. DFT calculations predict that during the reaction the solvated Li cation moves from the carbanion centre, thus freeing its lone pair for nucleophilic attack on the remote phenyl ring. This charge separation leads to several alternative conformations. The one having Li⁺ bound to the carbamate oxygen gives rise to the lowest‐energy transition structure, and also leads to inversion of the configuration. In agreement with the IR studies, the DFT calculations fail to locate a dearomatised intermediate.     

Functionalization and Rearrangement of Spirocyclohexadienyl Oxindoles: Experimental and Theoretical Investigations

The preparation and functionalization of spirocyclohexa‐2,5‐diene oxindoles is described. The spirocyclic core of the title compounds was installed by using a SmI₂‐mediated cyclization of aryl iodobenzamides. Epoxidation with CF₃CO₃H was then carried out and was shown to occur with a high level of diastereocontrol: the reagent approaches the diene moiety syn to the amide group, which is likely to be as a consequence of hydrogen bonding between the amide C?O bond and the peracid hydrogen. Carbanionic functionalization of the spirocyclohexa‐2,5‐diene oxindoles was then examined, leading to an unprecedented rearrangement of the strained spiro system into dearomatized phenanthridinones. Upon treatment with lithium diisopropylamide (LDA) at ?40 °C, the dienes rearranged to provide a phenanthridinone lithium enolate intermediate that was trapped by electrophiles including alkyl halides and aldehydes. Interestingly, alkylation and hydroxyalkylation occurred with different regiocontrol. DFT calculations were performed that rationalize the observed skeleton rearrangement, emphasizing the role of LDA/diisopropylamine in this rearrangement. The proposed mechanism thus relies on a thermodynamically driven diisopropylamine‐mediated proton transfer with the cleavage of the diene–amide C?O bond as the key step.     

Pyridyl group assisted deprotonation of a methyl group on silicon: complex induced proximity effect and novel hydroxymethylation

A novel methodology for the deprotonation of a methyl group on silicon has been developed. This newly developed alpha-lithiation protocol is based on the intramolecular pyridyl group coordination to stabilize the alpha-silyl carbanion together with the inherent silicon alpha effect. It was found that the deprotonation (t-BuLi/Et(2)O/-78 degrees C) occurs with 2-pyridyltrimethylsilane but not with other related silanes such as phenyltrimethylsilane, 3-pyridyltrimethylsilane, and 4-pyridyltrimethylsilane. It seems that this deprotonation proceeded through the agency of the complex-induced proximity effect (CIPE) of a 2-pyridyl group on silicon. (1)H NMR analysis of (2-pyridyldimethylsilyl)methyllithium revealed the intramolecular coordination of a pyridyl group to lithium. (2-Pyridyldimethylsilyl)methyllithium was found to react with chlorosilanes, hydrosilanes, chlorostannanes, bromine, iodine, organic bromides, aldehydes, and ketones in good to excellent yields. The resultant adducts were further oxidized with H(2)O(2)/KF to give the corresponding alcohols in excellent yields. Thus, this two-step transformation provides an efficient method for the nucleophilic hydroxymethylation.