Allosteric anion recognition by metal complexation of tris(bipyridine-imidazolium) ligand

A new tripodal imidazolium ligand 2 comprising three 2,2′-bipyridine-imidazolium subunits connected through a mesityl spacer has been synthesized and 1:1 complexes of 2 with Fe(II) and Ru(II) ions have been prepared. ¹H NMR spectroscopy including NOE analysis and molecular modeling study established that the complexes exist as a pseudocryptand type twisted structure in solution. The Fe(II) and Ru(II) complexes show strong 1:1 binding of Cl⁻, Br⁻, and I⁻ anions in MeCN-d₃ with a large enhancement of the guest selectivity (Cl⁻ > Br⁻ > I⁻) upon metal complexation.     

New interlocked molecules generated from a podand containing urea units and imidazolium salts using an anion template

A podand containing urea units (L) was found to form interlocked structures with 2,5-dihexylamide imidazolium salts (3·X), 2,5-dihexyl imidazolium salts (4·X), and 2,5-dihexyl benzoimidazolium salts (5·X), where X=Cl⁻, Br⁻, and PF₆⁻ using anions as templates. The binding ability of L and guest molecules was evaluated by ¹H NMR titrations in CDCl₃. It was found that L could form complexes with guest molecules in the following order, 3·X > 5·X > 4·X. Stabilities of the complexes also depended on shape of the templated anions: Cl⁻>Br⁻?PF₆⁻. Hydrogen bonding and π-π stacking interactions played an important role in the self-assembling of these interlocked molecules.     

Ferrocene-based imidazolium receptors for anions

Cyclic and acyclic ferrocene derivatives bearing two imidazolium rings have been synthesized and characterized by NMR, elemental analysis, mass spectra, and X-ray crystallography. Electrochemical measurements revealed that all the receptors displayed a significant anodic shift response for F⁻. In addition, for receptors 1, 2, and 4, addition of HSO₄⁻ induced quite different electrochemical behavior with dramatic cathodic peak current increase on CV. ¹H NMR titrations demonstrated that receptors 1, 2, and 4 showed selectivity for AcO⁻ while receptor 3 exhibited high affinity toward Cl⁻ among the anions investigated.     

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H₂PO₄⁻ and F⁻ over Cl⁻, while 2 can even distinguish H₂PO₄⁻ from F⁻.     

An indicator displacement system for fluorescent detection of phosphate oxyanions under physiological conditions

A fluorogenic chemosensing system is described and shown to selectively detect pyrophosphate under physiological conditions. In the best case, pyrophosphate and hydrogen phosphate are capable of displacing a fluorescent coumarin-derived indicator from a bis Zn²⁺-dipicolylamine coordination compound with association constants of 10⁷ and 10⁵ M⁻¹, respectively.     

Anthracene derivatives bearing two urea groups as fluorescent receptors for anions

For the recognition and sensing of anionic analytes, comparative studies were carried out on the anion bindings of pyrophosphate, H₂PO₄⁻, and dicarboxylates to the anthracene derivatives bearing two urea groups on the 1,8 and 9,10-positions as fluorescent chemosensors for anions. Their binding properties were compared using fluorescence and ¹H NMR, and the results were rationalized with an ab initio study.     

Fluorescent sensing of pyrophosphate and ATP in 100% aqueous solution using a fluorescein derivative and Mn

A new fluorescein derivative has been synthesized for the detection of pyrophosphate (PPi) and ATP in 100% aqueous solution. Chemosensor 1 in the presence of Mn²⁺ (2.5 equiv) displayed selective fluorescent enhancements with PPi and ATP at pH 7.4. among the anions examined. The association constant of 1 in the presence of Mn²⁺ with PPi and ATP was calculated as 4.2 × 10⁴ and 3.5 × 10⁴ M⁻¹.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

A simple click generated probe for highly selective sequential recognition of Cu(II) and pyrophosphate

A click generated quinoline derivative (1) has been synthesized and used as a fluorescent probe for sequential recognition of Cu²⁺ and pyrophosphate (PPi) in DMSO/H₂O (1:1, v/v, HEPES 20 mM, pH = 7.4) solution. Probe 1 displays high selectivity to Cu²⁺ ions, and the in-situ prepared probe 1-Cu²⁺ exhibits high selectivity toward pyrophosphate (PPi) with emission recovery of probe 1. Therefore, 1-Cu²⁺ complex can be applied as a fluorescence turn-on probe for PPi with high selectivity and sensitivity.     

Synthesis, structural characterization, and luminescence properties of multinuclear silver complexes of pyrazole-functionalized NHC ligands containing Ag-Ag and Ag-π interactions

A few pyrazole-functionalized imidazolium salts have been prepared via the reactions of N-alkylimidazole and 3,5-bis(chloromethyl)pyrazole or 2-(1-(2-chloroethyl)-5-methyl-1H-pyrazol-3-yl)-6-(5-methyl-1-vinyl-1H-pyrazol-3-yl) pyridine. Reactions of these imidazolium salts with Ag₂O led to the successful isolation of tetranuclear [Ag₄(L)₂](X)₂ (X = PF₆⁻ or BF₄⁻; H₃L1 = 3,5-bis(N-benzylimidazoliumyl)pyrazole, H₃L2 = 3,5-bis(N-(2,4,6-trimethylphenyl)imidazoliumyl)pyrazole, H₃L3 = imidazolium cyclophane from the condensation of 3,5-bis(chloromethyl)pyrazole and 1,4-bis(imidazolyl)butane) and trinuclear silver clusters supported by N-heterocyclic carbene ligands in high yields. The molecular structures of these silver complexes have been confirmed by ¹H, ¹³C NMR, ESI-MS spectroscopy, and X-ray diffraction analyses. The tetranuclear complexes [Ag₄(L1)₂](PF₆)₂ (1) and [Ag₄(L2)₂](BF₄)₂ (2) consist of a pair of Ag-Ag contacts (ca. 3.11 Å) showing weak silver-silver interaction. [Ag₄(L3)₂](PF₆)₂ (3) has a square planar Ag₄ core sandwiched by two NHC cyclophanes with Ag-Ag distances of 3.22 Å. All the silver atoms in 1-3 are located in the same linear C-Ag-N coordination environment. [Ag₃(L4)₂] (PF₆)₃ (HL4 = 2-(1-(2-methylimidazoliumylethyl)-5-methyl-1H-pyrazol-3-yl)-6-(5-methyl-1-vinyl-1H-pyrazol-3-yl) pyridine) (4) is a trinuclear complex in which the three silver are bridged by two L4 molecules, and the Ag₃ units form one-dimensional chain via Ag-π interaction. The luminescence properties of the imidazolium salts and their silver complexes were also studied.     

Fluorescent sensor based on dimesitylborylthiophene derivative for probing fluoride and cyanide

A new D-π-A dimesitylboron derivative with terminal phenothiazine bridged by fluorenevinyl (PFTB) has been synthesized. It was found that PFTB could selectively recognize fluoride and cyanide anions by naked eyes. Upon addition of F⁻ and CN⁻, the color of the solution of PFTB in DCM turned to yellowish-green from yellow and strong green emitting was observed under UV light, while the emission of PFTB in DCM was weak. Moreover, the presence of 10 equiv of tetrabutylammonium salts of other anions, such as Cl⁻, Br⁻, I⁻, AcO⁻, HSO₄⁻, H₂PO₄⁻, could not lead to obvious changes of the UV–vis absorption and the fluorescent emission spectra of PFTB. The detection limits of PFTB towards F⁻ and CN⁻ were 7.52×10⁻⁸ mol/L and 6.12×10⁻⁸ mol/L in DCM, respectively. Therefore, the D-π-A type triarylborane derivatives can be used as ‘turn on’ fluorescent sensors for detecting F⁻ and CN⁻.     

A pyrene-benzthiazolium conjugate portraying aggregation induced emission,a ratiometric detection and live cell visualization of HSO3

The present study deals with the photophysical property of a pyrene-benzthiazolium conjugate R1, as a strong intramolecular charge transfer (ICT) probe exhibiting long wavelength emission in the red region. Unlike traditional planar polyaromatic hydrocarbons whose aggregation generally quenches the light emission, the pyrene based R1 was found to display aggregation-induced emission (AIE) property along with simultaneous increase in its quantum yield upon increasing the water content of the medium. The R1 exhibits high specificity towards HSO₃⁻/SO₃²⁻ by interrupting its own ICT producing there upon a large ratiometric blue shift of ∼220 nm in its emission spectrum. The lowest detection limit for the above measurement was found to be 8.90 × 10⁻⁸ M. The fluorescent detection of HSO₃⁻ was also demonstrated excellently by test paper strip and silica coated TLC plate incorporating R1. The live cell imaging of HSO₃^─ through R1 in HeLa cells was studied using fluorescence microscopic studies. The particle size and morphological features of R1 and R1-HSO₃⁻ aggregates in aqueous solution were characterized by DLS along with SEM analysis.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.     

Effect of counterions and central cores of tripodal imidazolium salts on palladium-catalyzed Suzuki-Miyaura cross-coupling reactions

Seven tripodal imidazolium salts were synthesized and used as catalyst precursors in cross-coupling reactions of aryl halides with arylboronic acids. Effect of counterions and central cores of seven tripodal imidazolium salts was investigated. The tripodal imidazolium salt anchored to benzene with anion PF₆⁻ was found most effective with Pd(OAc)₂ for the cross-coupling of aryl bromides with arylboronic acids.     

Synthesis, characterisation and properties of ferrocenylalkylimidazolium salts

New ferrocenylalkylimidazolium salts [Fc(CH₂)_n(C₃H₃N₂)R]X⁻ were synthesised through the incorporation of green chemistry principles of atom economy and when feasible under solvent-free conditions. The products comprise a series of salts all characterised by the ferrocenyl moiety with variations in the length of the linker alkyl chain (n), the size of the imidazolium alkyl substituent (R) or the electronic nature of the counter-ion (X⁻). The dependence of the physical and electronic properties of the salts on the three main structural variants was studied. It was found that variation in the steric size of the R group has the most profound influence on the melting points of the ionic liquids. The compounds were fully characterised by IR, ¹H and ¹³C NMR, MS and melting point determinations.     

A fluorescent cavitand for the recognition of GTP

A new fluorescent cavitand bearing four imidazolium groups as well as four pyrene groups was synthesized for the recognition of GTP through (C-H)⁺-X⁻ hydrogen bond formation.     

A novel dichromate-sensitive fluorescent nano-chemosensor using new functionalized SBA-15

A novel fluorescence nano-chemosensor for Cr₂O₇²⁻ anion has been developed by assembly of fluorescent aluminum complex of 8-hydroxyquinoline (AlQ_x) within the channels of modified SBA-15. SBA-SPS-AlQ_x shows a fluorescence emission at 486 nm. The observed remarkable fluorescence of SBA-SPS-AlQ_x quenches in presence of Cr₂O₇²⁻ anion. The results showed that this fluorescent nano-material can be a useful chemo-sensor for determination of dichromate anions in aqueous solutions. The linear detecting range of fluorescent nano-chemosensor for Cr₂O₇²⁻ anion was 0.16–2.9 μmol L⁻¹. The lowest limit of detection (LDL) was also found to be 0.2 ng mL⁻¹ in aqueous solutions. SBA-SPS-AlQ_x showed selectively and sensitively fluorescent quenching response toward Cr₂O₇²⁻ ion in comparison with I₃⁻, NO₃⁻, CN⁻, CO₃²⁻, Br⁻, Cl⁻, F⁻, H₂PO₄⁻ and SO₄²⁻ ions, which was because of the higher stability of its inorganic complex with dichromate ion.     

Highly selective detection of Hg ion by push–pull-type purine nucleoside-based fluorescent sensor

Highly selective detection of Hg²⁺ ion has been achieved using the push–pull-type purine nucleoside-based fluorescent sensor L1. The sensor L1 incorporating aza-18-crown-6 at C6 position of purine nucleoside, is highly sensitive and selective toward Hg²⁺ ion in CH₃CN–H₂O mixture (92/8, v/v). The detection limit for the fluorescent sensor L1 toward Hg²⁺ ion is 7.8 × 10⁻⁸.     

Supported imidazolium ionic liquid phases: A new material for solid-phase extraction

This study reports a material that is based on the concept of ionic liquid analogue: a slightly crosslinked polymer-supported imidazolium trifluoroacetate salt (IL-CF₃COO⁻) that favorably combines the properties of ionic liquids (ILs) and the advantages of a solid support.The ionic liquid-supported material was evaluated for the first time as a solid-phase extraction (SPE) sorbent for selectively and quantitatively extracting pharmaceuticals from aqueous samples.The novel IL-CF₃COO⁻ was evaluated under reversed-phase (RP), weak anion exchange (WAX), strong anion exchange (SAX) and strong cation exchange (SCX) SPE procedures, and we found that SAX conditions are the most suitable for investigating the behaviour of the IL-CF₃COO⁻ material. Under SAX conditions, the IL-CF₃COO⁻ material was capable of selectively and quantitatively extracting a group of acidic compounds from aqueous samples, while washing basic analytes that were also present in the sample.The SPE method using IL-CF₃COO⁻ material was used to analyse 1000 ml of different aqueous samples (ultrapure, tap and river) with complete recovery of the acidic compounds studied. Moreover, the method provided clean chromatogram and high recoveries when percolating complex real samples, such as 1000 ml of river water and 250 ml of effluent wastewater from a sewage treatment plant spiked at low levels with the analytes studied.     

A reversible chemosensor for nitrite based on the fluorescence quenching of a carbazole derivative

The carbazole derivative, with an amino group in 9-position (9-methylacryloylamino carbazole (MAC), has been utilized to prepare a fluorescent sensor and used for the determination of NO₂⁻ based on the reaction between nitrite (NO₂⁻) and excess I⁻ to form I₃⁻, which can quench the fluorescence of carbazole derivative. MAC, as a fluorescent carrier, has a terminal double bond and is covalently immobilized on a quartz glass plate surface by photo-polymerization to prevent the leakage of the dye. The sensor shows sufficient repeatability, selectivity, operational lifetime of 8 weeks, and a fast response of less then 30 s. NO₂⁻ can be determined in the range between 1.0×10⁻⁶ and 1.0×10⁻⁴ mol l⁻¹ with a detection limit of 8.0×10⁻⁷ mol l⁻¹ at pH of 2.0. The quenching mechanism is discussed. Most commonly coexisting ions do not interfer with the NO₂⁻ assay.