Study on the Salting-out Effect using Silica Species by FAB-MS

The salting-out effect has been characterized on the basis of the relative peak intensity of silica species, observed by FAB-MS (fast atom-bombardment mass spectrometry) in solutions of sodium chloride, sodium nitrate, sodium sulfate, calcium chloride, lithium chloride and magnesium chloride. A critical change in the peak intensity ratios of the linear and cyclic tetramers of silica against the sodium ion (Na⁺) concentrations was observed at Na⁺ concentration between 0.1 and 1 mol⋅dm⁻³. The degrees of the changes of these peak intensity ratios increased in the order NaNO₃ < Na₂SO₄ < NaCl. In CaCl₂ solutions, these peak intensity ratios changed significantly at Ca²⁺ concentrations between 0.05 and 0.5 mol⋅dm⁻³. The salting-out effect observed is the total change in the concentration of silica brought about by complex factors, such as the changing solubility of silicate complexes, the increases in the concentrations of different kinds of soluble silicate complexes induced by changes in the hydrophobicity and hydrophilicity of the solution, and the contribution of hydrolysis.     

Characterization of Silicate Complexes in Aqueous Sodium Sulfate Solutions by FAB-MS

When the sodium ion (Na⁺) concentration is increased above 0.5 mol-dm⁻³ (M), the concentrations of dissolved silica in aqueous sodium chloride (NaCl) and sodium nitrate (NaNO₃) solutions decrease because of the salting out effect. On the other hand, the concentration of the dissolved silica in aqueous sodium sulfate (Na₂SO₄) solutions increases monotonously as the concentration of Na⁺ is increased above 0.5 M. The purpose of this study is to determine the reasons why the salting-out effect is not observed in Na₂SO₄ solutions. FAB-MS (Fast Atom Bombardment Mass Spectrometry) was used to sample directly the silica species dissolved in aqueous Na₂SO₄, NaCl, and NaNO₃ solutions. In the FAB-MS spectra of these solutions, the peak intensity ratios of the linear tetramer to the cyclic tetramer largely increased for Na⁺ concentrations between (0.1 and 1) M. This shows that some characteristics of the Na₂SO₄ solutions are similar to those of the NaCl and NaNO₃ solutions. In Na₂SO₄ solutions, however, when the concentration of Na⁺ is higher than 1 M, the peak intensity of the dimer is much higher than those of the other silicate complexes. In Na₂SO₄ solutions, the SO₄²⁻ ion undergoes partial hydrolysis to form HSO⁻₄ and OH⁻ is produced. In particular, in the range where the concentration of SO₄²⁻ is high, the pH of the solution increases slightly. This higher pH yields more dimers from the hydrolysis of silicate complexes. This increase in dimer production agrees with the observation that silica dissolves in sodium hydroxide (NaOH) solutions mainly as a dimer when the concentration of NaOH is less than 0.1 M. In Na₂SO₄ solutions at high concentrations, a salting-out effect is not observed for silica. This is due to the increase in the concentration of OH⁻, which accelerates the hydrolysis of silica and results in dimer formation.     

Poly(propylene imine) dendrimer complexes of Cu(II), Zn(II), and Co(III) as catalysts of hydrolysis of p-nitrophenyl diphenyl phosphate

Poly(propylene imine) dendrimers having 8, 32, and 64 primary amine end groups form diamino Cu(II), diamino Zn(II), and tetramino Co(III) complexes that are identified spectrophotometrically and titrimetrically. The dendrimer–metal ion complexes catalyze the hydrolysis of p-nitrophenyl diphenyl phosphate in zwitterionic buffer solutions at pH ≤ 8.1 with relative activities Cu(II) > Zn(II) > Co(III). The rates of hydrolysis are faster with sodium perchlorate than with sodium chloride to control ionic strength. In sodium perchlorate solutions with Cu(II) the rates increase with increasing size of the dendrimer. In sodium chloride solutions with Cu(II) the rates decrease with increasing size of the dendrimer. Rate constants in buffered sodium chloride solutions of dendrimers and 1.0mM Cu(II) are 1.3–6.3 times faster than in the absence of Cu(II). The fastest hydrolyses occurred at a dendrimer primary amine to Cu(II) ratio NH₂/Cu ≤ 2. At NH₂/Cu = 4 and with the 1,4,7,10-tetraazacyclodecane complex of Cu(II) hydrolysis rates were much slower. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2727–2736, 1999     

Solubility and physic-chemical properties of NaH2PO4 in phosphoric acid,sodium chloride and their mixture solutions at T = (298.15 and 313.15) K

In this study, solubility and physic-chemical properties of sodium dihydrogen phosphate in sodium chloride, phosphoric acid and their mixture solutions at T = (298.15 and 313.15) K have been investigated by using isothermal dissolution method. In the three systems, the solubility of NaH₂PO₄ always increases with the temperature increasing and decreases with molar concentration of phosphoric acid (sodium chloride) increasing because of the same ion effect. Solubility data of sodium dihydrogen phosphate in the mixed solution of sodium chloride and phosphoric acid is basically required for designing and optimizing the solvent extraction process in the industrial production.     

Influences of Micelle Formation and Added Salts on the Hydrolysis Reaction Rate of p‐Nitrophenyl Benzoate in Aqueous Buffered Media

The hydrolysis reaction rate of p‐nitrophenyl benzoate (p‐NPB) has been examined in aqueous buffer media of pH 9.18, containing surfactants, cetyltrimethylammonium bromide (CTAB) and chloride (CTAC), or sodium dodecyl sulfate (SDS) at 35°C. Although the rate constant [log (k /s⁻¹)] of p‐NPB hydrolysis has once decreased slightly below the critical micelle concentration (CMC) value for CTAB and CTAC, it has begun to increase drastically with micellar formation. With increasing concentrations larger than the CMC value, the log (k /s⁻¹) value has reached the optimal value, i.e., a 140‐ and 200‐fold rate acceleration for CTAB and CTAC, respectively, compared to that without a surfactant. Whereas the anionic surfactant, SDS, has caused only a gradual rate deceleration in the whole concentration range (up to 0.03 mol dm⁻³). Increases in pH of the buffer have resulted in increases of the hydrolysis rate. In the CTAB micellar solution, the remarkably enhanced rate has been retarded significantly by the addition of only 0.10 mol dm⁻³ bromide salts. The effects of rate retardation caused by the added salts follows in the order of NaBr > Me₄NBr > Et₄NBr > Pr₄NBr > n‐Bu₄NBr. In the absence of surfactant, however, the addition of the bromide salts has accelerated the hydrolysis rate, except for the metallic salt of NaBr, with the order of Me₄NBr < Et₄NBr < Pr₄NBr < n‐Bu₄NBr. In the CTAC micellar solution, similar rate retardation effects have been observed in the presence of chloride salts (NaCl, Et₄NCl, and n‐Bu₄NCl). The effects of added salts have been interpreted from the viewpoints of the changes in activity of the OH⁻ ion and/or the nucleophilicities of the anions from the added salts.     

Interaction of PdCl 42- with L-cystine in hydrochloric acid solutions

The effect of acidity and equilibrium chloride ion concentration on the interaction of PdCl₄ ^2- with cystine (H₂CySS) in hydrochloric acid solutions was studied. Pd(H₄CySS)Cl₃+ complex was found to form at [Cl^–] = 1.0, 0.5, or 0.25 mol/Linthe [H⁺] range from 0.10 to 1.00 mol/L; the relevant equilibrium constant was determined. Monodentate coordination of cystine to palladium(II) through the sulfur atom was proposed on the basis of analysis of conditional stability constants as functions of [Cl^–] and [H⁺].     

A quantum chemical consideration of ligand exchange in palladium(ii) aqueous and chloride complexes

The behavior of potassium tetrachloropalladate(II) in media simulating biological fluids has been studied. In aqueous solutions of NaCl, the aquation rate is higher than the rate of chloro ligand introduction into the internal coordination sphere of palladium. In HCl solutions, on the contrary, the process of palladium chloro complex formation predominates. The latter is apparently due to protonation of water molecules composing aqua complexes. By means of the ZINDO/1 method, the substitution of ligands – water molecules and hydronium ion – in planar complexes of palladium(II) by chloride ion has been investigated. All complexes containing H₂O and H₃O⁺ ligands, other than [Pd(H₂O)₄]²⁺, have intramolecular hydrogen bonds. In [Pd(H₂O)₃(H₃O)]³⁺ and trans-[Pd(H₂O)₂(H₃O)Cl]²⁺, a “non-classic” symmetric hydrogen bond O ··· H ··· O is established (ZINDO/1, RHF/STO-6G*). By the first three steps the substitution of hydronium ion in the internal sphere of palladium atom is more favorable thermodynamically, compared to water molecules. Logarithms of stepwise stability constants of palladium(II) chloride complexes correlate linearly to enthalpies (ZINDO/1, PM3) of water substitution by chloride ion.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Fractal analysis of pit morphology of Inconel alloy 600 in sulphate,nitrate and bicarbonate ion-containing sodium chloride solution at temperatures of 25–100 °C

Pit morphology of Inconel alloy 600 in sulphate (SO₄ ^2-), nitrate (NO₃ ^-) and bicarbonate (HCO₃ ^-) ion-containing 0.5 M sodium chloride (NaCl) solution was analysed in terms of fractal geometry as functions of solution temperature and anion concentration using the potentiostatic current transient technique, scanning electron microscopy, image analysis and ac-impedance spectroscopy. Potentiostatic current transients revealed that the pitting corrosion is facilitated by the increase in solution temperature, irrespective of anion additives, and that it is hindered by the increase in NO₃ ^- and HCO₃ ^- ion concentration, regardless of solution temperature. Above 60 °C, it was also found that the addition of SO₄ ^2- ions impedes pit initiation, but enhances pit growth. The value of fractal dimension D _f of the pits increased with increasing solution temperature and with decreasing NO₃ ^- and HCO₃ ^- ion concentration. Moreover, the value of D _f increased above 60 °C with increasing SO₄ ^2- ion concentration. This is caused by the increase in the ratio of pit perimeter to pit area, implying the formation of pits with micro-branched shape due to the acceleration of the local attack in the pits. From the decrease of the depression parameter with increasing solution temperature, it is inferred that the roughness of the pits increased with increasing solution temperature. In addition, the depression parameter was found to increase with increasing NO₃ ^- and HCO₃ ^- ion concentration. But, above 60 °C, in the case of SO₄ ^2- ion addition, the depression parameter decreased with increasing SO₄ ^2- ion concentration. From the experimental findings, the three-dimensional pit morphology is discussed in terms of the values of D _f of the pits and the depression parameter, with respect to anion concentration and solution temperature.     

Liquid-liquid extraction and spectrophotometric determination of palladium with 2-mercaptobenz-amide

2-Mercaptobenzamide (MBA) was investigated as a reagent for the extraction of palladium. The palladium complex of MBA was extracted into tributyl phosphate (TBP). The pK_a of the ligand was 5.45 with the stability constant of the palladium complex β₂=10^7.1. The composition of the complex in TBP was Pd:MBA:TBP=1:2:2. Addition of sodium chloride accelerated the rate of extraction. Various interfering ions could be masked with EDTA; Ag(I), Au(III), Os(VIII), Se(IV), Te(IV) etc. interfered. The molar absorptivity was 1.59×10⁴ l mol^?1 cm^?1; 1–35 μg Pd could be determined at pH 6.0.     

The hydrolysis of the cerium(III) ion,Ce3+, in aqueous perchlorate solutions at 50°C

The hydrolysis equilibria of the Ce³⁺ ion have been studied at 50°C by measuring, with a glass electrode, the hydrogen ion concentration of Ce(ClO₄)₃ solutions. The Ce(III) concentration ranged from 0.1 to 1 m, while the ClO⁻₄ level was kept constant at 3 m by adding LiClO₄. Solutions containing hydrolysed species, in which at the most 0.4% of the Ce³⁺ can be transformed into reaction products without the formation of a precipitate, were prepared by constant-current coulometry. The potentiometric data have been explained in terms of Ce(OH)²⁺, Ce₂(OH)⁵⁺ and Ce₃(OH)⁴⁺₅ complexes. Their formation constants in the inert 3 m LiClO₄ medium are reported.     

The electrochemical reduction reaction of dissolved oxygen on Q235 carbon steel in alkaline solution containing chloride ions

Cyclic voltammetry, electrochemical impedance spectroscopy, and rotating disk electrode voltammetry have been used to study the effect of chloride ions on the dissolved oxygen reduction reaction (ORR) on Q235 carbon steel electrode in a 0.02 M calcium hydroxide (Ca(OH)₂) solutions imitating the liquid phase in concrete pores. The results indicate that the cathodic process on Q235 carbon steel electrode in oxygen-saturated 0.02 M Ca(OH)₂ with different concentrations of chloride ions contain three reactions except hydrogen evolution: dissolved oxygen reduction, the reduction of Fe(III) to Fe(II), and then the reduction of Fe(II) to Fe. The peak potential of ORR shifts to the positive direction as the chloride ion concentration increases. The oxygen molecule adsorption can be inhibited by the chloride ion adsorption, and the rate of ORR decreases as the concentration of chloride ions increases. The mechanism of ORR is changed from 2e⁻ and 4e⁻ reactions, occurring simultaneously, to quietly 4e⁻ reaction with the increasing chloride ion concentration.     

Chemistry of thienopyridines. XL. Reactions of 7-acetyl-4-(1-carboethoxy-1-cyano)methylene-4,7-dihydrothieno-[2,3-b]pyridine. Part 3: Kinetics of hydrolysis

The kinetics of hydrolysis of 7-acetyl-4-(1-carboethoxy-1-cyano)methylene-4,7-dihydrothieno[2,3-b]pyridine ( 1 ) in undried DMSO-d₆ to give ethyl 2-(4-thieno[2,3-b]pyridyl)cyanoacetate and acetic acid at ambient temperature was investigated by ¹H nmr spectrometry. The reaction is pseudo first order in the concentration of 1 with a rate constant of 9 × 10^?4 per minute, not noticeably altered by the addition of deuteriotrifluoroacetic acid. The hydrolysis is, however, catalyzed by means of added pyridine-d₅ (k = 37 × 10^?4 per minute). The pyridine is presumed to serve as a transfer agent for the acetylium ion as in acetylations with acetyl chloride and acetic anhydride.     

Extraction of palladium from nitric acid medium by commercial resins with phosphinic acid,methylene thiol and isothiouronium moieties attached to polystyrene-divinylbenzene

Summary Commercially available polystyrene-divinylbenzene (PS-DVB) resins functionalized with isothiouronium (Tulsion CH-95), phosphinic acid (Tulsion CH-96) and methylene thiol (Tulsion CH-97) moieties have been used for separating palladium from nitric acid medium. Extraction of palladium has been studied as a function of time, concentration of nitric acid and palladium. The distribution coefficients (K_d, ml/g) of palladium on sulfur based resins (Tulsion CH-95 and Tulsion CH-97) are higher (5000-10⁴ml/g in 0.1M nitric acid) than on Tulsion CH-96 resin and decrease with increasing concentration of nitric acid. The initial rate of extraction of palladium by Tulsion CH-95 and Tulsion CH-97 resins was very rapid and the time required for the establishment of equilibrium was a function of palladium concentration in the aqueous phase. The rate data could be fitted by a second order rate equation and the magnitude of rate constant for the extraction of palladium by these resins (~10²M^-1. min^-1) decreased in the order of: Tulsion CH-95 > Tulsion CH-97 > Tulsion CH-96. The extraction isotherms of Tulsion CH-95 were fitted by Langmuir adsorption model and the coefficients were obtained by regression. The extraction capacity of palladium on Tulsion CH-95 was found to be ~20 mg/g at 3M nitric acid. Column experiments have been conducted and the data were fitted using Thomas model. A column utilization of 75% was achieved for the extraction of palladium by Tulsion CH-95 resin.     

The Determination of Protonation Constants of Some Amino Acids and Their Esters by Potentiometry in Different Media

In this study, stoichiometric protonation constants of L-tyrosine, L-cysteine, L-tryptophane, L-lysine, and L-histidine, and their methyl and ethyl esters in water and ethanol–water mixtures of 30, 50, and 70% ethanol (v/v), were determined potentiometrically using a combined pH electrode system calibrated as the concentration of hydrogen ion. Titrations were performed at 25^∘C and the ionic strength of the medium was maintained at 0.10 mol⋅L⁻¹ using sodium chloride. Protonation constants were calculated by using the BEST computer program. The effect of solvent composition on the protonation constants is discussed. The log₁₀ K₂ values of esters generally decreased with increasing ethanol content. However, the log₁₀ K₁ values of the esters of L-tyrosine, L-cysteine, and L-tryptophane were found to increase with increasing ethanol content in contrast those of L-lysine and L-histidine esters.     

Morphological studies of the mechanism of pit growth of pure aluminum in sulfate ion- or nitrate ion-containing 0.1 M NaCl solutions

The mechanism of pit growth of pure aluminum (Al) in sulfate ion (SO₄ ^2–)- or nitrate ion (NO₃ ^–)-containing 0.1 M sodium chloride solutions has been studied in terms of the morphological changes of artificial pits using potentiodynamic polarization experiment, potentiostatic current transient technique and optical microscopy. The increase in SO₄ ^2– and NO₃ ^– ion concentrations in NaCl solution raised the pitting potential E _pit of pure Al, which is ascribed to the impediment to pit initiation on pure Al by the addition of SO₄ ^2– or NO₃ ^– ions. From the potentiostatic current transients of artificial pits in aqueous 0.1 M NaCl solution, the average value of the pit current was observed to increase with increasing SO₄ ^2– ion concentration, whereas that value of the pit current in the presence of NO₃ ^– ions increased up to ca. 0.4 M NO₃ ^– ion concentration and then decreased abruptly with increasing NO₃ ^– ion concentration. From observations of the morphologies of the pits, it appears that the pit grows preferentially in the lateral direction or in the downward direction by adding SO₄ ^2– or NO₃ ^– ions to aqueous 0.1 M NaCl solution, respectively. Based upon the experimental results, two different pit growth mechanisms by anion additives can be proposed: (1) pit growth by the preferential attack of both SO₄ ^2– and Cl^– to the pit wall in SO₄ ^2–-containing solutions; (2) pit growth by the creation of an aggressive environment at the pit bottom up to 0.4 M NO₃ ^– ion concentration due to the lower mobility of NO₃ ^– than Cl^– in NO₃ ^–-containing solutions. Electronic Publication     

Mechanistic Study of Oxidation of Palladium(II) by Cerium(IV) in Aqueous Acid

The kinetics of oxidation of Pd^II by Ce^IV have been studied spectrophotometrically in HClO₄ media at 40 °C. The reaction is first order each in [Ce^IV] and [Pd^II] at constant [H⁺]. Increasing [H⁺] accelerates the reaction rate with fractional order in [H⁺]. The initially added products, palladium(IV) and cerium(III) do not have any significant effect on the reaction rate. At constant acidity, increasing the added chloride concentration enhances the rate of reaction. H₃Ce(SO₄)₄⁻ and PdCl₄²⁻ are the active species of oxidant and reductant respectively. The possible mechanisms are proposed and the reaction constants involved have been determined.     

Low-temperature transformations of sodium sulfate and sodium selenite in the presence of pre-reduced palladium modifier in graphite furnaces for electrothermal atomic absorption spectrometry

The low-temperature interaction (up to 550°C) of a pre-reduced palladium modifier with sodium sulfate and sodium selenite on the pyrolytic graphite platform was studied using X-ray photoelectron spectroscopy (XPS) and electron microprobe analysis. The equipment applied allowed the introduction of samples heated in an argon flow into the analytical chamber of the XPS spectrometer without contact with the air. Electron microprobe analysis showed that palladium and sulfur preferably occupy different areas on the platform surface. On the contrary, selenium from sodium selenite tends to occupy areas of the graphite surface covered with palladium. The most probable reason for this is the chemisorption of selenium (IV) on the palladium surface at the drying stage. No changes in the XPS spectra of metallic Pd and S⁶⁺ were observed when Na₂SO₄ and Pd were heated together on the graphite platform in the range 100–550°C. The reduction of sodium selenite on the graphite surface already starts during drying. Pre-reduced palladium intensifies this process. The rate of the reduction is proportional to the amount of palladium, and in the presence of palladium at an atomic ratio of Pd/Se=7.5, the transformation of Se⁴⁺ into Se⁰ completes at 250°C.     

Hydrolysis of hydro(pyrrolyl-1)borates

The hydrolysis of hydro(pyrrolyl-l)borates ([BH_n(NC₄H₄)_4-n]⁻, n = 1,2,3) can be treated as a kinetically one-step reaction outside of the mildly acidic region. In strongly acidic medium the hydrolysis takes place in a stepwise manner; the intermediates (boranes and the cationic boron compounds) being hydrolyzed more slowly than the borate anion. In the first step of the hydrolysis of [BH₃(NC₄H₄)]⁻ the B---H bond, while in case of [BH₂(NC₄H₄)₂]⁻ and [BH(NC₄H₄)₃]⁻ the B---N bond is breaking.In neutral and mildly alkaline medium, the hydrolysis is a general acid catalyzed reaction (A---S_E2 mechanism). It becomes to a special H⁺-ion catalyzed reaction (A-1 mechanism) in strongly alkaline region since the protonated intermediate can be reversed to the original borate upon reaction with the OH⁻ ion. The hydrolysis presumably takes place through an intermediate which is protonated on the pyrrolyl nitrogen. Concomitant to the hydrolysis an isotopic exchange reaction was observed on the C_α and C_β atoms of the pyrrolyl group in heavy water. In the hydrolysis of the [BH₃(NC₄H₄)]⁻-anion the N-protonated intermediate is assumed to be able to reverse to the original borate even in acidic or neutral region, at least in part.     

Zinc(II) oxide solubility and phase behavior in aqueous sodium phosphate solutions at elevated temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility/phase behavior of zinc(II) oxide in aqueous sodium phosphate solutions at temperatures between 17 and 287°C. ZnO solubilities are observed to increase continuously with temperature and phosphate concentration. At higher phosphate concentrations, a solid phase transformation to NaZnPO₄ is observed. NaZnPO₄ solubilities are retrograde with temperature. The measured solubility behavior is examined via a Zn(II) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reaction equilibria are obtained from a least-squares analysis of the data. The existence of two new zinc(II) ion complexes, Zn(OH)₂(HPO₄)^2– and Zn(OH)₃(H₂PO₄)^2–, is reported for the first time. A summary of thermochemical properties for species in the systems ZnO–H₂O and ZnO–Na₂O–P₂O₅–H₂O is also provided.