Fluorocyclopropanes. IV. Copolymers of perfluorocyclopropene

Perfluorocyclopropene undergoes free-radical copolymerization with ethylene, isobutylene, cis- and trans-2-butene, vinyl acetate, methyl vinyl ether, vinyl chloride, styrene, acrylonitrile, tetrafluoroethylene, vinyl fluoride, and vinylidene fluoride. The copolymerization proceeds most readily with electron-rich olefins such as methyl vinyl ether (to yield a 1:1 copolymer), but conditions were found to give copolymers with electron-deficient olefins such as tetrafluoroethylene and vinylidene fluoride. Copolymers with methyl vinyl ether, tetrafluoroethylene, vinyl fluoride, and vinylidene fluoride were examined in detail. Evidence is presented that the perfluorocycloproply ring is incorporated intact into the copolymer and can be subsequently isomerized to a perfluoropropenyl unit by heating at 200–300°C.     

Gamma-Ray Induced Polymerization of Vinyl Monomers in Bagasse

Vinyl monomers such as vinyl acetate, vinyl chloride, methyl methacrylate and styrene etc., can be polymerized without catalyst into the composites of bagasse material by gamma-radiation induced in situ liquid polymerization process. The fundamental factors, such as polymerization-rate, effect of swelling agent, molecular weight of vinyl polymers and graft reaction between bagasse cellulose and vinyl polymers, have been investigated and discussed. The use of suitable low G-value polar swelling agents and the application of suitable gamma dose-rate are two key factors found to control the smooth in situ liquid polymerization system of vinyl monomers in bagasse.     

Design of latent catalysts and their application to polymer synthesis

Design of latent catalysts such as benzyl sulfonium, benzyl ammonium, benzyl pyridinium, benzyl phosphonium, and hydrazinium salts, and their application to polymer synthesis have been described. They have been demonstrated as excellent thermal or photolatent catalysts for polymerizations of cyclic monomers such as epoxides, bicyclo orthoesters, spiro orthocarbonates, and vinyl monomers such as styrene and vinyl ethers.     

On the stereospecific conversion of proximally-oxygenated trisubstituted vinyltriphenylstannanes into stereodefined trisubstituted alkenes

[reaction: see text] Allylically oxygenated vinyl alpha-triphenylstannanes such as 22 can be readily converted into vinyl iodides and thereafter stereodefined trisubstituted alkenes with retention of configuration.     

Poly(vinyl chloride) Nanocomposites

Poly(vinyl chloride) is one of the major thermoplastics beside other commodities polymers like polyethylene and polystyrene. However, some of its main characteristics such as plasticity, thermal and photo stability are inferior to other commodity polymers. Adding nano scale inorganic fillers to poly(vinyl chloride) or other polymers in view to obtain polymer nanocomposites with superior properties has drawn the attention of many researchers in the last decades. Poly(vinyl chloride) nanocomposites are obtained mainly by in situ polymerization, solution based or mixing techniques. The resulting products show improvement of most important properties of poly(vinyl chloride) such as thermal, mechanical, rheological, flammability, antibacterial, etc. This paper presents preparation ways of poly(vinyl chloride) nanocomposites using different nano fillers and the improved properties compared with those of virgin poly(vinyl chloride).     

Polymer particle formation in suspension polymerization of vinyl chloride and vinyl acetate

Equipment has been designed and assembled in such a way that direct microscopic observation of polymer particle formation in suspension polymerization of vinyl chloride and vinyl acetate is possible. The apparent mode of transformation from monomer droplets into polymer particles has thus been studied under two sets of conditions: (1) with agitation and (2) without agitation. In both cases, as the initial vinyl acetate/vinyl chloride ratio was raised, the apparent change in the shape and transparency of particles occurring during the course of polymerization became less evident. In vinyl chloride homopolymerization and vinyl acetate–vinyl chloride copolymerization with relatively high vinyl chloride concentrations, the polymer particles burst during the course of polymerization. Some factors which affect the change in the size of particles are also discussed.     

Block Copolymerization of Vinyl Monomers with Macroiniferer

Abstract

Block copolymers composed of a polyether, such as poly(oxytetra-methylene), and vinyl polymers, such as polystyrene, poly(methyl methacrylate), poly(butyl acrylate), and poly(vinyl acetate), were prepared by photopolymerizations of vinyl monomers initiated with a polyether macroiniferter, α - (diethyldithiocarbamylacetyl) - ω - (diethyldithiocar-bamylacetoxy)-poly(oxytetramethylene). ESR spectroscopy and end-group analysis of diethyldithiocarbamyl indicated that block copolymers should be predominantly ABA-type copolymers. The block copolymers were characterized in detail by NMR, GPC, and DSC analysis.     

Synthesis of new hybrid monomers and oligomers containing cationic and radical polymerizable vinyl groups and their photoinitiated polymerization

New hybrid vinyl monomers with both cationic- and radical-polymerizable vinyl groups were synthesized by the reaction of bis[1(chloromethyl)-2-(vinyloxy)ethyl]terephthalate ( 3 ) with unsaturated carboxylic acids using 1,8-diazabicyclo[5.4.0]-undecene-7 (DBU) as a base. The reaction of 3 with methacrylic acid 4a was carried out using DBU in DMSO at 70°C for 24 h to give an 86% yield of the hybrid vinyl monomer ( 5a ). Polycondensation of 3 with unsaturated dicarboxylic acids was also performed using DBU to give hybrid vinyl oligomers with radical polymerizable C (DOUBLE BOND) C groups (V_R) in the main chain and cationic polymerizable vinyl ether moieties (V_C) on the side chain. The photopolymerization of these hybrid vinyl compounds proceeded smoothly in bulk using either a cationic photoinitiator such as a sulfonium salt or a radical photoinitiator such as acyl phosphine oxide under UV irradiation. © 1996 John Wiley & Sons, Inc.     

The emulsion polymerization of vinyl acetate. Factors controlling particle surface area and rate of polymerization

An emulsion polymerization system with uniform continuous addition of vinyl acetate monomer, Pluronic F68 surfactant, and persulfate initiator has been examined with variation of the surfactant concentration over a tenfold range. The particle surface area per unit weight of emulsion was found to vary directly as the surfactant/monomer ratio, as also did the emulsion viscosity. At constant polymer/emulsion weight the number of particles per unit emulsion weight varied directly as the cube of the surfactant concentration. It is shown that these relationships apply also to other monomers, such as styrene and methacrylate esters. The solubility of vinyl acetate in a range of Pluronic F68 aqueous solutions was determined, and it was shown that the rate of polymerization is dependent on the solubility of the monomer in the surfactant solution. It is concluded that when a water-soluble initiator is used, polymerization proceeds in the aqueous phase. The principal factors controlling the rate of polymerization in the emulsion polymerization of vinyl acetate are, consequently, the initiating system and the concentration of monomer in the aqueous phase. Solubilization characteristics indicate that the surfactant concentration will have a much greater effect on the less water-soluble monomers, such as styrene, than on the more soluble ones, such as vinyl acetate.     

The α-halogeno ether function: formation and use in the design of tailor-made polymers

α-Halogeno ether species, in appropriate conditions, can induce the “living” cationic polymerization of vinyl ethers. They can also be used as initiators for the “living” polymerization of styrene derivatives. Therefore, their use as intermediates in the preparation of tailor-made polymers and copolymers offers interesting opportunities in macromolecular synthesis. The main parameters which determine and control their reactivity are reviewed and discussed. The possibility to generate quantitatively these derivatives by various routes and from different organic functions such as aldehyde, ketone, acetal and hydroxyl is examined. Some of these routes have been used to generate the α-halogeno ether function directly at the end of acetal and hydroxy-terminated polymers. The latter have then been used as macroinitiators to prepare new block copolymers. The synthesis of poly(isobutyl vinyl ether-β-ethyl vinyl ether), poly(styrene-β-chloroethyl vinyl ether) and poly(chloroethyl vinyl ether-β-butadiene-β-chloroethyl vinyl ether) by this technique is described.     

双官能度自由基引发剂应用研究的进展

双官能度引发剂在自由基聚合中的应用不断受到重视，本文介绍了常用的双官能度引发剂，并综述了其在制备嵌段共聚物及引发乙烯类单体（如苯乙烯、氯乙烯、丙烯酰胺等）聚合的研究进展。     

Reinvestigation of the grignard reactions with formic acid. A convenient method for preparation of aldehydes

Grignard reagents react with formic acid in tetrahydrofuran to produce aldehydes in relatively good yields Various aldehydes such as alkyl, aryl, allyl, benzyl and vinyl aldehydes were prepared from the corresponding Grignard reagents. The reaction with vinyl Grignard reagents proceeded with retention of configuration.     

A Facile Room Temperature Synthesis of Zinc Oxide Nanostructure and Its Influence on the Flame Retardancy of Poly Vinyl Alcohol

In this work, poly vinyl alcohol–ZnO nanocomposites were synthesized via two different in situ and ex-situ methods. In ex-situ, at first zinc oxide nanostructures were synthesized by one-step precipitation reaction between zinc acetate and sodium hydroxide. The effect of different surfactants such as poly vinyl pyrrolidone, poly vinyl alcohol and poly ethylene glycol on the morphology of ZnO nanostructures was investigated. Nanostructures were characterized by X-ray diffraction, scanning electron microscopy. The influence of ZnO nanostructures on the flame retardancy of the poly vinyl alcohol matrix was studied using underwriter laboratories UL-94 analysis.     

The role of amine in vinyl radical polymerization

Advances of radical initiation systems and their initiation mechanisms in vinyl polymerization through peroxycompound and amine systems as well as photo-induced charge transfer initiation in the presence of amine are briefly reviewed which is concerned with some generalization regarding to the role of amine in the form of aminium radical in such vinyl radical polymerization.     

Preparation and chiral recognition ability of cellulose 3,5-dimethylphenylcarbamate immobilized on silica gel through radical polymerization

Polysaccharide-immobilized chiral stationary phases (CSPs) were prepared by the polymerization of cellulose 3,5-dimethylphenylcarbamate, having a polymerizable vinyl group, such as 4-vinylphenylcarbamate or 2-methacryloyloxyethylcarbamate, at the 6-position, with a vinyl monomer, such as styrene, isoprene, t-butyl acrylate, or t-butyl methacrylate, on silica gel under various conditions. Their chiral recognition abilities were then evaluated with high-performance liquid chromatography. The immobilized cellulose 3,5-dimethylphenylcarbamate remained on the silica gel even if washed with tetrahydrofuran, which could dissolve the cellulose derivative. The chiral recognition abilities of the immobilized CSPs were similar to those of the coated CSPs when the vinyl monomer content was low. The chiral recognition abilities of the obtained immobilized CSPs slightly depended on the vinyl monomers. The immobilization of the cellulose derivatives was more efficiently attained on the silica gel modified with a vinyl compound. The cellulose derivatives, randomly having a vinyl group at the 2-, 3-, or 6-position of the glucose unit, were prepared by a one-pot reaction. The immobilization efficiency of these derivatives was slightly lower than that of the derivative with the vinyl group at the 6-position. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3703–3712, 2003     

Synthesis of high-molecular-weight poly(vinyl alcohol) with high yield by novel one-batch suspension polymerization of vinyl acetate and saponification

Generally, owing to tautomerism of vinyl alcohol monomer, poly(vinyl alcohol) (PVA) cannot be obtained by direct polymerization but it can be obtained by the saponification of poly(vinyl ester) precursors such as poly(vinyl acetate) (PVAc). In this study, to obtain high-molecular-weight (HMW) PVA with high yield through a one-batch method, we tried continuous saponification of PVAc prepared by suspension polymerization of vinyl acetate (VAc). We controlled various polymerization conditions, such as polymerization temperature, initiator concentration, suspending agent concentration, agitation speed, and VAc/water ratio, and obtained PVAc with a maximum conversion of VAc into PVAc of over 95-98%. PVA beads having various molecular parameters were prepared by continuous saponification of PVAc microspheres. Despite our employing a one-batch process, a maximum degree of saponification of 99.9% could be obtained. Continuous heterogeneous saponification of prepared PVAc yielded HMW PVA having a number-average degree of polymerization of 2,500-5,500, a syndiotactic diad content of 51-52%, and degree of saponification of 85.0-99.9%.     

Alkyl chain branching in ethylene–vinyl acetate copolymer

Ethylene–vinyl acetate copolymers contain two kinds of side chains: acetoxy branches originating from incorporated vinyl acetate and alkyl branches. The alkyl branching was determined by infrared analysis after converting the ethylene–vinyl acetate copolymer to a hydrocarbon polymer by three steps: hydrolysis, iodation with hydriodic acid containing red phosphorus, and reductive hydrogenation with lithium aluminum hydride. It was found that physical properties such as stiffness were dependent both on the degree of alkyl chain branching and on vinyl acetate content.     

Introduction of peroxide groups onto carbon black surface by radical trapping and radical graft polymerization of vinyl monomers initiated by the surface peroxide groups

The introduction of peroxide groups onto carbon black surface was achieved through the trapping of the peroxide radicals formed by the decomposition of polymeric peroxide, such as poly(tetraethylene glycol peroxyadipate) (ATPPO), and bis-peroxide, such as 1,1′-bis (t-butyldioxy)cyclohexane (Perhexa-C), by the surface: the amount of peroxide groups introduced onto carbon black surface by the treatment with ATPPO and Perhexa-C were determined to be 0.07 mmol/g and 0.12 mmol/g, respectively. The polymerization of vinyl monomers with positive e-value, such as methyl methacrylate and 2-hydroxyethy methacrylate, was successfully initiated by the peroxide groups introduced onto carbon black surface. During the polymerization, the corresponding polymers were effectively grafted onto the surface as a result of the propagation of polymer from the surface radicals formed by decomposition of the peroxide groups. The polymerization of vinyl monomers with negative e-value, such as styrene and vinyl acetate, however, was scarcely initiated by the peroxide groups on carbon black. This may be due to the fact that surface active radicals, which were formed by the hydrogen abstraction from carbon black by fragment radicals, inhibit the polymerization of vinyl monomers with negative e-value. © 1996 John Wiley & Sons, Inc.     

Colloidal titration of aqueous zirconium solutions with poly(vinyl sulfate) by potentiometric endpoint detection using a toluidine blue selective electrode.

Zirconium oxy-salts were hydrolyzed to form positively charged polymer or cluster species in acidic solutions. The zirconium hydrolyzed polymer was found to react with a negatively charged polyelectrolyte, such as poly(vinyl sulfate), and to form a stoichiometric polyion complex. Thus, colloidal titration with poly(vinyl sulfate) was applied to measure the zirconium concentration in an acidic solution by using a Toluidine Blue selective plasticized poly(vinyl chloride) membrane electrode as a potentiometric end-point detecting device. The determination could be performed with 1% of the relative standard deviation. The colloidal titration stoichiometry at pH < or = 2 was one mol of zirconium per equivalent mol of poly(vinyl sulfate).     

13C chemical shifts of the β olefinic carbon in some heterocyclic vinyl ethers as a measure of p-π conjugation

¹³C NMR spectra of 5- and 6-membered heterocyclic vinyl ethers containing an endocyclic or exocyclic CC bond have been determined and the chemical shift of the β carbon of the vinyl group has been used as a measure of the extent of p-π conjugation in the vinyloxy system. The results show that in the 6-membered heterocyclic vinyl ethers with an exocyclic double bond, such as 2-methylenetetrahydropyran, p-π conjugation is essentially weaker than in the corresponding 5-membered heterocycles, such as 2- methylenetetrahydrofuran. In the respective endocyclic isomers, the difference in the extent of conjugation is considerably smaller, although the same relative order still applies. The spatial structures of these compounds are discussed on the basis of these findings.