超支化聚芳酰胺的合成

由3,5-二硝基苯甲酰氯和邻氨基苯甲酸合成了AB2型单体2-(3,5-二氨基苯甲酰氨基)苯甲酸。该单体进行自缩聚反应,合成了新型超支化聚酰胺(a),将其与酰氯反应,得到了7种封端的超支化聚合物(b~h)。用FT-IR1、H NMR、GPC、DSC测试技术对超支化聚合物进行了表征。封端改性后,聚酰胺的溶解性均得到了提高,聚合物的重均分子量(Mw)为3.36~3.96 kg/mol,特性粘度(ηinh)为0.061~0.078 dL/g,聚合物玻璃化转变温度(Tg)为56~185℃,随封端剂脂肪链增长而降低,随封端剂极性增加而升高。     

电活性超支化聚合物的合成与性质

通过分子设计, 利用A2+B3反应合成了一种新型电活性超支化聚合物材料. 该材料在保持聚苯胺的电活性基础上, 还具有超支化聚合物特有的低黏度(其特性黏度为0.33 dL/g)、低结晶性及良好的溶解性. 利用紫外-可见光谱对聚合物的氧化过程进行了监测. 热失重分析显示, 该材料具有较好的热稳定性, 失重10%时的温度高达517 ℃. 该材料具有较高的介电常数, 有望成为一种具有实际应用价值的高介电材料.     

含芳杂环的超支化聚合物的合成与性能研究

在紫外光照射的条件下,以CpCo(CO)2为催化剂,通过3,5-双-(4-炔苯基)-4-苯基-1,2,4-三唑和2,5-双-(4-炔苯基)-1,3,4-(噁)二唑的双炔分别与1-辛炔的[2 2 2]环三聚反应,合成了一类含芳杂环的可溶于普通有机溶剂的新型超支化聚合物.采用红外光谱、核磁共振谱、热失重分析、紫外吸收光谱、荧光光谱、循环伏安法等方法对聚合物进行结构表征和性能测试.结果表明,聚合物具有优异的热稳定性,尤其是含三唑的聚合物热失重5%的分解温度在450℃以上;在800℃时,残余碳化率高达75%.在光激发的条件下,这类聚合物在二氯甲烷溶液中发射深蓝光,其荧光量子效率可达80%.电化学测试结果表明,这类含芳杂环聚合物具有较好的电子传输能力.     

超支化分子桥联受阻酚抗氧化剂的合成与表征

以正十八胺为核的1.0代超支化大分子和β-(3,5-二叔丁基-4-羟基苯基)丙酰氯为原料,通过酰胺化缩合反应,合成了一种具有长链烷基和2个受阻酚基团的新型超支化分子桥联受阻酚类抗氧化剂.通过正交实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成体系为:3,5-丙酰氯为酰化剂、K_2CO_3为缚酸剂、苯和水为反应溶剂.通过条件优化实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成条件为:3,5-丙酰氯与1.0代超支化大分子的物质的量比为6∶1、反应温度为25 ℃、反应时间为12 h、体系苯与水体积比为6∶1、3,5-丙酰氯与缚酸剂K_2CO_3的物质的量比为1∶1,在此条件下,超支化分子桥联受阻酚类抗氧化剂的收率高达75.5%.FT-IR和1H NMR证实了合成抗氧化剂的化学结构与其理论结构相符.超支化分子桥联受阻酚类抗氧化剂在聚乙烯树脂中的抗氧化性能优于抗氧化剂1076,且随着烷基链长度的增加,抗氧化性能增强.     

超支化聚(胺酯)的分子设计及其制备

以丙烯酸甲酯和二乙醇胺为原料由Michael加成反应制得N ,N 二羟乙基 3 胺基丙酸甲酯单体 ,再用“准一步法”和“发散法”使之与 1 ,1 ,1 三羟甲基丙烷 (核 )反应合成一种新型超支化聚 (胺 酯 ) .以核磁共振和元素分析方法对N ,N 二羟乙基 3 胺基丙酸甲酯单体的分子结构进行了表征 .GPC测定表明合成的超支化聚 (胺 酯 )分子量分布窄 ,具有单分散性 ;粘度小于同分子量的线形分子 ;耐热性能较好 ,失重温度高于2 0 0℃ .     

由苯-1，2，4-三羧酸-1，2—酐和羟乙基哌嗪合成酰胺键、叔氨和酯键交替排列的水溶性超支化聚合物

基于官能团非等活性原理，由商品化多组分单体一步法合成了超支化聚合物． 用苯—1，2，4-三羧酸—1，2酐(BTAA)与羟乙基哌嗪(HEPZ)为原料，利用氨基和羟 基反应活性不同，制备了结构非对称超支化聚酰胺—酯．分别用红外、核磁共振确 定了所得聚合物的结构．该聚合物分子骨架中含有交替排列的酰胺键、叔氨和酯键 ，易溶于水．本合成方法原料易得、工艺简单，适合大量制备超支化聚合物．     

超支化聚氨酯热熔胶的合成及性能

采用AA′+bB2法制备了可以直接作为热熔胶使用的超支化聚氨酯(HPU). 以甲苯-2,4-二异氰酸酯(TDI)与聚碳酸酯二醇(PCDL)为原料合成两端为异氰酸根(NCO)封端的低聚物(A2),然后在0 ℃下加入二乙醇胺(DEOA)得AB2型中间物,进一步高温聚合得支化点间含有长链段的超支化聚氨酯. 采用红外光谱 (FTIR)、核磁共振(13C NMR)、GPC对超支化聚氨酯的结构进行了表征. 结果表明,所得到的产物具有超支化结构,在55 ℃下反应20 h后,支化度可达到0.75,重均分子量Mw=7.0×103. 对产物进行了热失重和粘接性能测试. 结果表明,超支化聚氨酯的热分解温度为200 ℃. 产物的粘接剪切强度随着链段长度的增加先增大后减小,最大可达到6.5 MPa.     

以四重氢键结合的超支化聚合物及其涂层材料

合成了以Upy(2-ureido-4[1H]-pyrimidone)封端的超支化聚合物并研究其涂层材料性能.首先在哌嗪与三羟甲基丙烷三丙烯酸酯摩尔比2.25∶1条件下,合成了端仲胺基超支化聚(酯-胺)(HPEA),进而在仲胺基/异氰酸酯基官能团比1∶0.3、1∶0.4和1∶0.5下,通过HPEA与单异氰酸酯基甲基异胞嘧啶反应,合成了一系列带有Upy基元的改性超支化聚合物.由于Upy基元间形成了自识别四重氢键,改性聚合物比HPEA具有更高的玻璃化转变温度和热分解温度,并且改性聚合物涂层具有优良的力学性能,这表明分子间强氢键相互作用可有效改善超支化聚合物的性能.     

TA-EG-GMA合成超支化碱溶性感光聚合物

通过1,2,4-偏苯三酸酐和乙二醇反应合成超支化聚合物,利用合成聚合物分子外围的羧基与甲基丙烯酸缩水甘油酯反应,在超支化聚合物分子外围引入反应性甲基丙烯酰氧基.研究了树脂组成对感光性和碱溶性的影响.结果表明:调整反应物料配比及反应性甲基丙烯酰氧基含量,可以获得较好的碱溶性和光固化性能.     

HBPS-PEO多臂星形聚合物电解质的合成及离子导电性的研究

通过叠氮化超支化聚苯乙烯(HBPS-N3)与端炔基聚乙二醇单甲醚(ay-PEO)的点击反应,合成了以超支化聚苯乙烯(HBPS)为核、不同分子量的聚氧化乙烯(PEO)为臂的多臂星形聚合物(HBPS-PEO),并利用ATR-FTIR,1H-NMR,GPC对合成的星形聚合物的结构进行了表征.将该种星形聚合物与双三氟甲基磺酰亚胺锂(LiTFSI)进行复合,制备了星形聚合物为基体的聚合物电解质,通过交流阻抗技术和DSC对该聚合物电解质的离子导电性能及热性能进行了研究.结果表明,星形结构可以在一定程度上抑制结晶的形成,这种新型的星形聚合物电解质的室温电导率明显高于相应的线形聚合物电解质,当n(EO)/n(Li)=40,PEO臂的分子量为1000时,该星形聚合物电解质的离子电导率最高,30℃时为6.7×10-5Scm-1,40℃时可以达到1.2×10-4Scm-1;TGA结果表明,制备的星形聚合物的初始分解温度(Tonset)都高于360℃,具有良好的热稳定性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.