二（2,4,4—三甲基戊基）膦酸从盐酸介质中萃取钍（Ⅳ）的机理

研究了二（２，４，４－三甲基戊基）膦酸的正辛烷溶液从盐酸介质中萃取钍的机理。在未控制离子强度下，萃取平衡反应为：Ｔｈ＾４＋＋Ｃｌ＾－＋３（ＨＡ）２（ｏ）→ＴｈＣｌＡ３（ＨＡ）３（ｏ）＋３Ｈ＾＋。在控制离子强度为１．０ｍｏｌ／Ｌ时，萃取反应为Ｔｈ＾４＋＋２Ｃｌ＾－＋３（ＨＡ）２（Ｏ）→ＴｈＣｌ２Ａ２．（ＨＡ）４（Ｐ）＋２Ｈ＾＋。用饮和法确定的萃合物组成为ＴｈＣｌＡ３．计算了萃取反应的平衡常数及热力学     

超高比表面炭载钼煤气甲烷化催化剂

以沥青中间相为原料，氢氧化钾直接活化，获得了比表面达２３６３ｍ￣２／ｇ的超高比表面炭分子筛（ＣＭＳ）。分别以ＣＭＳ、ＳｉＯ＿２、活性炭和θ－Ａｌ＿２Ｏ＿３为担体，制备了负载钼催化剂，并研究其加压甲烷化反应性能，发现活性依下面顺序增加：θ－Ａｌ＿２Ｏ＿３＜ＳｉＯ＿２＜活性炭（ＡＣ）＜ＣＭＳ。还分别以钼酸铵和磷钼酸（ＨＰＭｏ）为前驱体，制备了ＣＭＳ负载钼催化剂，并考察了其煤气甲烷化活性，发现不同的催化剂前驱体对催化剂反应活性影响很大。根据产物中ＣＨ＿４／ＣＯ＿２的变化，推测ＣＯ在钼催化剂上的甲烷化反应包括如下两个步骤：（１）３Ｈ＿２＋ＣＯ→ＣＨ＿４＋Ｈ＿２Ｏ，（２）ＣＯ＋Ｈ＿２Ｏ→ＣＯ＿２＋Ｈ＿２。     

C4H5N-(NH3)n氢键团簇的多光子电力与从头计算

在３５５和５３２ｎｍ激光波长下用ＴＯＦ质谱仪研究了Ｃ４Ｈ５Ｎ－（ＮＨ３）ｎ系列氢键团簇体系的多光子电离,实验发现,两波长下除了得到一系列团簇离子Ｃ４Ｈ５Ｎ－（ＮＨ３）ｎ＾＋外,还观测到一系列质子化产物Ｃ４Ｈ５Ｎ－（ＮＨ３）ｎ－Ｈ＾＋,这些质子化产物来自于光电离过程中团簇内部的质子转移反应;Ｃ４Ｈ５Ｎ－（ＮＨ３）ｎ＾＋系列离子出现反常强度变化,即Ｃ４Ｈ５Ｎ－（ＮＨ３）２＾＋离子强度较Ｃ４Ｈ５Ｎ－（Ｎ     

μ－4，4＇－联吡啶桥联三核Cu（Ⅱ）配合物的合成和磁性

合成了３种以４，４＇－联吡啶为桥联配体的三核环状Ｃｕ（Ⅱ）配合物［Ｃｕ＿３（４，４＇－ｂｐｙ）＿３·（ｐｈｅｎ）＿３］（ＣｌＯ＿４）＿６·２Ｈ＿２Ｏ（１）、［Ｃｕ＿３（４，４＇－ｂｐｙ）＿３］（ｂｐｙ）＿３］（ＣｌＯ＿４）＿６·Ｈ＿２Ｏ（２）和［Ｃｕ＿３（４，４＇－ｂｐｙ）＿３·（ＮＯ＿２－ｐｈｅｎ）＿３］（ＣｌＯ＿４）＿６·６Ｈ＿２Ｏ（３）。经元素分析、电导、ＩＲ、电子光谱、ＥＳＲ、磁化率等方法进行了表征，推定该配合物具有以４，４＇－联吡啶为扩展桥的结构。利用Ｈｅｉｓｅｎｂｅｒｇ模型求得交换参数Ｊ值为－０．２３ｃｍ－１（１）和－０．９０ｃｍ－１（３），表明配合物中金属离子间仅有很弱的反铁磁交换作用．     

Mn（Ⅲ）－苯甲酰丙酮缩乙二胺－有机碱配合物的合成及结构

合成了４种锰（Ⅲ）－苯甲酰丙酮缩乙二胺－有机碱配合物：Ｍｎ（ｂｚａｃｅｎ）ＬＣｌＯ＿４．（Ｌ为哌嗪，吡啶，γ－甲基吡啶和乙腈），测定了配合物［Ｍｎ（ｂｚａｃｅｎ）（ＣＨ＿（３）ＣＮ）ＣｌＯ＿４］的结构．晶体属正交晶系．空间群Ｐ＿ｎｍａ．晶胞参数：ａ＝０．９０７７（１）ｎｍ，ｂ＝１．５５６３（１）ｎｍ，ｃ＝１．７２０５（２）ｎｍ，Ｖ＝２．４３０５ｎｍ￣３，Ｚ＝４，Ｄ＿ｃ＝１．４８ｇ／ｃｍ￣３，Ｄ＿ｍ＝１．４９ｇ／ｃｍ￣３．配合物呈拉长八面体结构．对配合物的电子光谱和红外光谱进行了归属．     

硼掺杂多晶金刚石薄膜电极的电化学特性

用循环伏安法和恒电位法研究了硼掺杂多晶金刚石薄膜电极（ＤＦＥ）的若干电化学特性。电极面积４×４ｍｍ＾２。在０．１ｍｏｌ／Ｌ ＫＣｌ，ＮａＮＯ３，ＮａＯＨ和ＫＨ２ＰＯ４＋Ｎａ２ＨＰＯ４（ｐＨ＝６．８６）电解质溶液中电势窗口均为－５００￣＋８００ｍＶ；而在０．１ｍｏｌ／Ｌ ＨＣｌ和Ｈ２ＳＯ４溶液中电势窗口为－２００￣＋１１００ｍＶ．Ｋ３Ｆｅ（ＣＮ）６的氧化峰电位为＋５００ｍＶ，与Ｐｔ电极测量相同；校正     

C2H3Cl分子团簇内部离子-分子反应产生C4H5Cl+的研究

用同步辐射对（Ｃ２Ｈ３Ｃｌ）２分子团簇进行了光电离研究，发现该团簇内部发生了离子－分子化学反应，生成了十分稳定的反应产物Ｃ４Ｈ５Ｃｌ＾＋，不再是ｖａｒｄｅｒＷａａｌｓ弱键络合物，本文对反主尖机理进行了初步探讨。     

氰化钾团簇的结构和形成机理研究

利用激光气化铁氰化钾或亚铁氰化钾并利用飞行时间质谱检测方法对氰化钾团簇的形成机理进行了研究，结果发现：团簇正离子可归属为［Ｋ（ＫＣＮ）＿ｎ］￣＋，ｎ＝０～３７，它们的幻数为ｎ＝４、１３、２２、３７；团族负离子可归属为［（ＫＣＮ）＿ｎＣＮ］￣－＝，ｎ＝０～１３，它们的幻数为ｎ＝４、１３。这些幻数与氯化钠等碱金属卤化物团簇体系完全一致。这表明：它们的团簇结构应该是相同的，即１×３×３（ｎ＝４）、３×３×３（ｎ＝１３）、３×３×５（ｎ＝２２）、３×５×５（ｎ＝３７）结构。因此氰化钾晶体的初期形成过程也应采取ＮａＣｌ型结构的增长途径。在激光气化产生的等离子体中，正、负离子与中性团簇的碰撞增长反应、正离子与负离子的复合反应以及团簇的亚稳态解离反应造成了团簇离子的不同丰度分布。氰化钾团簇中稳定立方体结构的产生决定了幻数的出现。     

(Me_4N)[Mo_3(μ_3-O)(μ-Cl)_3(μ-O_2CCH_2Cl)_3Cl_3]三核钼簇合物的合成、结构及电化学研究

本文测定了三核钼簇合物（Ｍｅ４Ｎ）［Ｍｏ３（μ３Ｏ）（μＣｌ）３（μＯ２ＣＣＨ２Ｃｌ）３Ｃｌ３］的晶体结构，该晶体属于正交晶系，空间群Ｐ２１２１２１，晶胞参数：ａ＝１２．６３７５（９），ｂ＝１８．８９４（４），ｃ＝１０．７３３（４），Ｍｒ＝８７１．１５，Ｚ＝４，Ｄｏ＝２．２６ｇ／ｃｍ３。晶体属离子型，其簇阴离子是由一个μ３Ｏ原子桥连于准等边三角形排布的三核钼簇骼构成，具有接近Ｃ３Ｖ的对称性。其中ＭｏＭｏ和Ｍｏ（μ３Ｏ）平均键长分别为２５７７和１９８０。同时利用循环伏安法测定了该簇合物在ＣＨ３ＣＮ溶剂中的氧化还原电位。     

含杂环卡宾碳的铁羰基簇合物的结构化学研究Ⅱ．—Fe_3(CO)_8[:CNHC(S)C(CH_3)_2NH]的合成和晶体结构

Ｆｅ３（ＣＯ）＿（１２）和取代２，４＿二硫代乙内酰脲反应，得到新的取代物Ｆｅ３（ＣＯ）＿８－［：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ］（μ＿３－Ｓ）＿２，并进行了ＩＲ、１￣ＨＮＭＲ、ＭＳ表征，测定了它的分子和晶体结构，讨论了杂环卡宾碎片：ＣＮＨＣ（Ｓ）Ｃ（ＣＨ＿３）＿２ＮＨ的取代位置，它是通过卡宾碳原子与Ｆｅ配位。     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.