Analysis of Stability on Elastic Plates with Initial Imperfections

ＡＮＡＬＹＳＩＳＯＦＳＴＡＢＩＬＩＴＹＯＮＥＬＡＳＴＩＣＰＬＡＴＥＳＷＩＴＨＩＮＩＴＩＡＬＩＭＰＥＲＦＥＣＴＩＯＮＳＸｕＫａｉｙｕ（徐凯宇）（ＲｅｃｅｉｖｅｄＯｃｔ．５．１９９４；ＣｏｍｍｕｎｉｃａｔｅｄＰａｉＬｉｚｈｏｕ）ＡＮＡＬＹＳＩＳＯＦＳＴＡ...     

考虑初始缺陷与弹性模量的岩石变形破坏过程模拟方法

针对扰动作用下岩石存在初始缺陷的特点,通过探讨含初始缺陷岩石变形力学特征,根据含初始缺陷岩石弹性模量的变化情况,建立了初始损伤的确定方法。然后,引入几何损伤理论,通过分析三轴压缩条件下岩石损伤演化规律,建立了含初始缺陷岩石损伤模型,进而建立了考虑初始缺陷与弹性模量的岩石统计损伤本构模型,并给出了参数的确定方法。最后,通过砂岩三轴压缩试验资料分析得出:本文理论模型能够反映不同围压作用下含初始缺陷岩石的变形破坏全过程,与试验曲线较为接近;且常见损伤模型是本文理论模型的特例,表明本文模型和方法具有一定的合理性与可行性。     

Dynamics of thin periodic plates resting on a periodically inhomogeneous Winkler foundation

Summary The aim of the paper is to investigate the dynamic response of thin elastic plates having periodic substructure in planes parallel to the plates midplane and interacting with a Winkler foundation. The main goal of the analysis is to describe the effect of substructure size on the plates dynamics. For this purpose, the method proposed in [4, 5] is used. Two special cases are analysed: a plate band with a constant thickness interacting with a periodically inhomogeneous Winkler foundation, and a plate band with a periodically variable thickness interacting with a homogeneous Winkler foundation. The physical correctness conditions of the model are also discussed. Received 14 July 1998; accepted for publication 7 January 1999     

Analysis and optimization against buckling of beams interacting with elastic foundation

We consider an infinite continuous elastic beam that interacts with linearly elastic foundation and is under compression. The problem of the beam buckling is formulated and analyzed. Then the optimization of beam against buckling is investigated. As a design variable (control function) we take the parameters of cross-section distribution of the beam from the set of periodic functions and transform the original problem of optimization of infinite beam to the corresponding problem defined at the finite interval. All investigations are on the whole founded on the analytical variational approaches and the optimal solutions are studied as a function of problems parameters.     

Wrinkling of thick orthotropic sandwich plates under general loading conditions

Summary  This contribution presents an efficient analytical model as well as a FE computation of the critical load, which leads to local stability failure (wrinkling) in sandwich structures. The analytical model assumes an orthotropic face layer and a thick transversely isotropic core. In the last section, a more general core material model is considered. Common core materials (foams and honeycombs) can be described with good accuracy within this model. The main advantage of the solution is the consideration of general loading conditions for the orthotropic face layer as well as in-plane deformations of the core. The results of the FE calculations and the analytical model are in good agreement with each other. Received 7 January 1999; accepted for publication 15 June 1999     

Postbuckling and imperfection sensitivity of fixed-end and free-end struts on elastic foundation

Summary A study of the postbuckling and imperfection sensitivity of fixed-end and free-end struts on a Winkler elastic foundation is carried out. The configuration and stability of the postbuckling paths bifurcating from the critical points are analysed. For the most part of foundation stiffness, the corresponding postbuckling paths are shown to be falling with respect to load and be unstable. This indicates that, for almost all values of foundation stiffness, the buckling loads of the struts will be sensitive to imperfections. We also obtain imperfection sensitivity of the struts with respect to geometric imperfections having the shape of buckling modes. Received 30 October 1998, accepted for publication 30 March 1999     

On the modelling of dynamic problems for plates with a periodic structure

Summary The subject of analysis is the bending of elastic plates exhibiting a nonhomogeneous periodic structure and/or a periodically variable thickness in a certain direction parallel to the plate's midplane. The fundamental modelling problem is how to obtain an effective 2D-model of a plate under consideration, i.e., a 2D-model represented by PDEs with constant coefficients. This problem for periodic plates has been solved independently in [5] and [10], using asymptotic homogenization. However, homogenization neglects dynamic phenomena related to the plate's rotational inertia and cannot be applied to the analysis of higher-order vibration frequences. The main aim of this contribution is to formulate a new non-asymptotic effective 2D-model of a periodic plate which is free from the mentioned drawbacks and describes the dynamic behaviour of plates having the thickness of the order of the period length. The proposed model is applied to the analysis of some vibration problems.     

Interaction of a die with a layered elastic foundation

Plane and axisymmetric contact problems for a three-layer elastic half-space are considered. The plane problem is reduced to a singular integral equation of the first kind whose approximate solution is obtained by a modified Multhopp-Kalandiya method of collocation. The axisymmetric problem is reduced to an integral Fredholm equation of the second kind whose approximate solution is obtained by a specially developed method of collocation over the nodes of the Legendre polynomial. An axisymmetric contact problem for an transversely isotropic layer completely adherent to an elastic isotropic half-space is also considered. Examples of calculating the characteristic integral quantities are given. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 3, pp. 165–175, May–June, 2006.     

Buckling and post-buckling of annular plates on an elastic foundation

On the basis of von Kárman equations,the axisymmetric buckling and post-bucklingof annular plates on anelastic foundation is(?)tematically discussed byusing shootingmethods.     

General solution for large deflection problems of nonhomogeneous circular plates on elastic foundation

In this paper, a new method is presented based on [1]. It can be used to solve the arbitrary nonlinear system of differential equations with variable coefficients. By this method, the general solution for large deformation of nonhomogeneous circular plates resting on an elastic foundation is derived. The convergence of the solution is proved. Finally, it is only necessary to solve a set of nonlinear algebraic equations with three unknowns. The solution obtained by the present method has large convergence range and the computation is simpler and more rapid than other numerical methods.Numerical examples given at the end of this paper indicate that satisfactory results of stress resullants and displacements can be obtained by the present method. The correctness of the theory in this paper is, confirmed.     

The dynamic modelling of elastic wavy plates

Summary The aim of the contribution is to formulate an engineering theory describing the dynamic behaviour of periodically waved shell-like elements, called wavy plates. On the basis of the proposed theory, the effect of coupling between free macro- and micro-vibrations of a wavy plate is investigated. It is also shown that the homogenized model of wavy plates (obtained by scaling down the wavelength parameters) cannot be applied in the analysis of dynamic problems.The research was sponsored by KBN, Warsaw, under grant No 333109203.     

考虑周长约束的圆柱薄壳初始几何缺陷随机场建模方法

利用随机场对圆柱薄壳结构的初始几何缺陷进行建模,并据此建立了一种用于含初始几何缺陷轴压圆柱薄壳屈曲分析的随机分析方法。首先,指出已有将圆柱薄壳初始几何缺陷表征为二维高斯随机场的方法会导致与实际不相符的初始几何缺陷,如圆柱周长显著增大或缩小的几何缺陷。其次,提出一种考虑周长不变约束的随机场建模方法,以剔除与实际不相符的随机几何缺陷。最后,基于所建立的初始几何缺陷随机场模型,利用非干涉多项式混沌展开法进行圆柱薄壳的随机屈曲分析,给出临界屈曲载荷的概率分布。数值试验结果表明,基于随机场理论的初始几何缺陷建模方法可有效刻画几何缺陷对结构承载能力的影响,而提出的约束随机场建模方法又能有效减小结果的分散性。     

弹性地基上含孔隙功能梯度材料板的自由振动和动力响应

为研究弹性地基上含孔隙的材料特性沿厚度呈Sigmoid函数变化的功能梯度材料(S-FGM)板的振动特性,本文基于改进的Voigt模型,分别建立了孔隙为均匀分布和非均匀分布两种类型的功能梯度材料的物性参数模型.根据复合材料薄板理论导出了弹性地基上含孔隙的功能梯度材料板的运动方程,用伽辽金法寻求四边简支边界条件下板自由振动...     

NONLINEAR VIBRATION FOR MODERATE THICKNESS RECTANGULAR CRACKED PLATES INCLUDING COUPLED EFFECT OF ELASTIC FOUNDATION

IntroductionThe moderate thickness plates on elastic foundation are a kind of important structure instructural engineering. The mechanic characters of the plates on elastic foundation withdifferent boundary conditions have been received considerable atten…     

Three-dimensional elastic behavior of a nonhomogeneous layer

Summary  This paper deals with the theoretical treatment of a three-dimensional elastic problem governed by a cylindrical coordinate system (r,θ,z) for a medium with nonhomogeneous material property. This property is defined by the relation G(z)=G ₀(1+z/a) ^m where G ₀,a and m are constants, i.e., shear modulus of elasticity G varies arbitrarily with the axial coordinate z by the power product form. We propose a fundamental equation system for such nonhomogeneous medium by using three kinds of displacement functions and, as an illustrative example, we apply them to an nonhomogeneous thick plate (layer) subjected to an arbitrarily distributed load (not necessarily axisymmetric) on its surfaces. Numerical calculations are carried out for several cases, taking into account the variation of the nonhomogeneous parameter m. The numerical results for displacement and stress components are shown graphically. Received 10 May 1999; accepted for publication 15 August 1999     

Effect of elastic foundation on the vibration of orthotropic elliptic plates with varying thickness

Two-dimensional boundary characteristic orthonormal polynomials are used in the Rayleigh–Ritz method to study the free vibration of rectangular orthotropic elliptic plates resting on a Winkler elastic foundation. Two types of varying thickness are considered: (1) linearly varying with respect to the concentric ellipses, (2) linearly varying along both the principal axes simultaneously. Numerical results for frequencies are presented in tables. Nodal lines are shown in figures. Effects of stiffness of elastic foundation, aspect ratios of plates, degree of orthotropy, and types of thickness variation on vibration frequencies of elliptical plates are also discussed.     

Accurate modelling of piezoelectric plates: single-layered plate

Summary  The paper presents an efficient two-dimensional approach to piezoelectric plates in the framework of linear theory of piezoelectricity. The approximation of the through-the-thickness variations accounts for the shear effects and a refinement of the electric potential. Using a variational formalism, electromechanically coupled plate equations are obtained for the generalized stress resultants as well as for the generalized electric inductions. The latter are deduced from the conservative electric charge equation, which plays a crucial role in the present model. Emphasis is placed on the boundary conditions at the plate faces. The model is used to examine some problems for cylindrical bending of a single simply supported plate. Number of situations are examined for a piezoelectric plate subject to (i) an applied electric potential, (ii) a surface density of force, and (iii) a surface density of electric charge. The through-thickness distributions of electromechanical quantities (displacements, stresses, electric potential and displacement) are obtained, and compared with results provided by finite element simulations and by a simplified plate model without shear effects. A good agreement is observed between the results coming from the present plate model and finite element computations, which ascertains the effectiveness of the proposed approach to piezoelectric plates. Received 17 July 2000; accepted for publication 26 September 2000     

Elastoplastic bending of a sandwich bar on an elastic foundation

The elastoplastic bending of a sandwich bar with a stiff compressible core on an elastic foundation is studied. The kinematics of the bar, which is asymmetric across the thickness, is described adopting Bernoulli’s hypotheses for the face layers. The displacements of the core are assumed to vary linearly across the thickness. The foundation is described by the Winkler model. A system of equilibrium equations for displacements is derived and solved. Numerical results for a metal-polymer sandwich bar are presented __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 4, pp. 110–120, April 2007.     

Thermoelastic bending of a sandwich ring plate on an elastic foundation

The thermomechanical bending of an elastic sandwich ring plate with light core on an elastic foundation is considered. To describe the kinematics of the plate that is asymmetric across the thickness, broken-normal hypotheses are accepted. The foundation reaction is described by Winkler's model. A system of equilibrium equations is derived and solved for displacements. Numerical results for a sandwich ring plate in a temperature field are presented Translated from Prikladnaya Mekhanika, Vol. 44, No. 9, pp. 94–103, September 2008.     

Derivation of conditions of complete contact for a beam on a tensionless Winkler elastic foundation with Mathematica

The classical problem of a beam on a tensionless Winkler elastic foundation is reconsidered for the derivation of the conditions of complete contact between the beam and the foundation. This is achieved through the application of modern quantifier elimination software included in the computer algebra system Mathematica together with Taylor–Maclaurin series approximations to the deflection of the beam. Four particular beam problems have been considered in detail and the related QFFs (quantifier-free formulae) have been obtained for several values of the order in the series approximations. Additional approximation possibilities have also been investigated with an emphasis put on the use of the Galerkin method based on weighted residuals. The present results seem to constitute one more interesting application of modern quantifier elimination algorithms and the related software (here in Mathematica) to applied and engineering mechanics.