Combined redox couples for catalytic oxidation of methane by dioxygen at low temperatures

The combination of three redox couples Pd2+/Pd0-quinone/hydroquinone-NO2/NO creates an electron-transfer loop, which facilitates one-pot catalytic oxidation of methane selectively to methanol by dioxygen in CF3COOH at a temperature as low as 80 degrees C. This is the first example where an organic cocatalyst significantly increases the catalytic efficiency of a transition metal in the selective oxidation of methane in the presence of dioxygen.     

铂族金属催化剂低温 CO氧化研究近期进展

CO氧化可能是多相催化领域最常见的反应,它不仅能作为探针反应研究催化剂结构、反应活性位等,而且在诸多实际过程如空气净化、汽车尾气污染物控制、燃料电池所用氢源净化等扮演重要角色.最早的 CO氧化催化剂为霍加拉特剂,其组分主要为 CuO与 MnO2混合氧化物,然而在实际应用过程中存在低温活性低、吸湿易失活等缺点.1987年, Haruta等发现湿化学法制备的氧化物负载 Au催化剂表现出非常高的低温 CO氧化活性及耐水稳定性,其 Au粒子以纳米尺度分散,进而引发了催化研究领域的“淘金热”及纳米催化研究热潮.而 CO氧化通常作为考察 Au催化剂结构性质的探针反应,也成为考核其它金属催化剂是否具有高活性的判据之一. Pt族金属上 CO氧化反应从 Langmuir等研究开始至今已有100多年,然而低温下该金属催化剂活性与 Au催化剂相比要低一个数量级.本质原因为 Pt族金属上 CO吸附较强, O2吸附与活化受到抑制,而该步骤被认为是 CO氧化的速控步,因而表现出较低的催化活性.通常 Pt族金属催化剂需要100oC以上 CO才能脱附, O2进而得以吸附.目前研究人员采取多种策略,其基本原则为削弱 Pt族金属上 CO吸附强度或者提供其它活性位供 O2吸附与活化.本综述将概括近十年来Pt族金属催化剂 CO氧化研究进展,主要总结室温甚至超低温条件下的研究成果.高活性 CO氧化催化剂主要是通过采用可还原氧化物为载体或助剂,或者改变催化剂表面性质如使表面富 OH基物种来形成. Au催化剂的研究发现,改变金属粒子尺寸极有可能获得不同寻常的催化性能,而常规的 Pt族金属催化剂研究主要是在纳米尺度.近期人们发现逐渐减小 Pt族金属粒子尺寸,从纳米到亚纳米甚至单原子时,其电荷状态逐渐呈正价形式,这有利于削弱其 CO吸附强度.此外,可通过增强金属载体间的相互作用,改变金属载体接触方式,如从核壳到交叉结联结构,构筑出更多的金属载体界面,使得 O2更容易吸附与活化或稳定更多的 OH基物种进而在此界面与吸附的 CO反应.伴随着表征技术的发展, CO氧化机理的认识也更加深入,这给催化剂的设计带来更多新的思路.(1)改变 CO吸附活化位,将 CO吸附活化位从金属转移到载体上,从而大大降低 CO吸附强度,活化的 CO物种在反应过程中容易溢流到金属载体界面处,这甚至有利于超低温度下(–100oC左右) CO氧化.(2)改变 O2活化形式. O2通常在 Pt族金属上容易以解离氧原子形式存在,通过改变载体、金属载体界面性质使得 O2以分子氧形式活化,如形成超氧或过氧物种,这有利于降低 CO氧化的活化能垒,进而提高其低温甚至超低温下 CO氧化活性.今后,设计并合成出在超低温度下能够氧化 CO的 Pt族金属催化剂将成为 CO氧化催化剂研究的重要方向之一.     

Electrocatalytic oxidation of NADH at the self-assembled monolayer of nickel(II) macrocycle on gold electrode

Electroactive self-assembled monolayers (SAMs) of macrocyclic Ni(II) complex (1) were fabricated on gold electrode and its electrochemistry has been studied in different supporting electrolytes. Substantial stabilization of tervalent nickel and a significant negative shift of formal potential of the Ni(3+/2+) couple have been observed when the supporting electrolyte is changed from nitrate to phosphate. Coordination of supporting electrolyte anion with the Ni(III) complex shifts the formal potential and thus tervalent nickel is stabilized. SAM of 1 electrode shows an excellent electrocatalytic activity towards the oxidation of NADH in aqueous NaNO3 solution, whereas it scarcely catalyzes the oxidation of NADH in aqueous phosphate buffer solution. The electrocatalytic oxidation of NADH in Na2SO4 solution is less efficient than that in NaNO3 solution. The anion-dependent electrocatalysis has been discussed on the basis of the difference in the coordinating ability of the anions with the tervalent nickel centers. Steady-state current has been measured for the oxidation of NADH and it was proportional to the concentration of NADH.     

Reduction and oxidation of SrCoO(2.5) thin films at low temperatures

Brownmillerite SrCoO(2.5) (010) thin films synthesized by pulsed laser deposition became amorphous when reduced at low temperatures by CaH(2), indicating that the infinite-layer structure with the square planar Co(2+)O(4) configuration is unstable. Ferromagnetic and conducting perovskite SrCoO(3) epitaxial thin films, on the other hand, were obtained topotactically at room temperature by oxidation with NaClO.     

MCM-41 supported Cu-Mn catalysts for catalytic oxidation of toluene at low temperatures

Complete catalytic oxidation of toluene was investigated on Cu-Mn doped mesoporous and microporous catalysts, i.e., Cu-Mn/MCM-41, Cu-Mn/beta-zeolite, Cu-Mn/ZSM-5 (where SiO2/Al2O3 is either 25 or 38), and Cu-Mn/porous silica, in the presence of excess oxygen. The result shows that mesoporous catalysts have exhibited the highest catalytic activity among these catalysts above. The less amount of coke formation due to the unique mesoporous structures could play a key role in the high activity on the mesoporous catalyst. In addition, the bimetallic Cu-Mn-MCM-41 supported catalyst shows higher oxidation activity than either single metal catalyst, i.e., Cu-MCM-41 and Mn-MCM-41. The highly dispersed Cu-Mn mixed oxides on mesoporous structures probably provide active sites for the complete oxidation of toluene on these mesoporous catalysts.     

Ion exchange at a surface monolayer

Total reflection total conversion electron yield X-ray absorption fine structure is applied to the evaluation of ion exchange occurring at the surface monolayer of two-tailed ammonium ions. X-ray absorption measurements at a Br K-edge allow us to detect ion-exchange equilibria between Br- and Cl- added in a subphase. The ion-exchange selectivity of Br- over Cl- basically increases as the monolayer is compressed, indicating that Cl- is selectively squeezed out by compression because of its larger hydrated ionic radius.     

Selective oxidation of methanol and ethanol on supported ruthenium oxide clusters at low temperatures

RuO2 domains supported on SnO2, ZrO2, TiO2, Al2O3, and SiO2 catalyze the oxidative conversion of methanol to formaldehyde, methylformate, and dimethoxymethane with unprecedented rates and high combined selectivity (>99%) and yield at low temperatures (300-400 K). Supports influence turnover rates and the ability of RuO2 domains to undergo redox cycles required for oxidation turnovers. Oxidative dehydrogenation turnover rates and rates of stoichiometric reduction of RuO2 in H2 increased in parallel when RuO2 domains were dispersed on more reducible supports. These support effects, the kinetic effects of CH3OH and O2 on reaction rates, and the observed kinetic isotope effects with CH3OD and CD3OD reactants are consistent with a sequence of elementary steps involving kinetically relevant H-abstraction from adsorbed methoxide species using lattice oxygen atoms and with methoxide formation in quasi-equilibrated CH3OH dissociation on nearly stoichiometric RuO2 surfaces. Anaerobic transient experiments confirmed that CH3OH oxidation to HCHO requires lattice oxygen atoms and that selectivities are not influenced by the presence of O2. Residence time effects on selectivity indicate that secondary HCHO-CH3OH acetalization reactions lead to hemiacetal or methoxymethanol intermediates that convert to dimethoxymethane in reactions with CH3OH on support acid sites or dehydrogenate to form methylformate on RuO2 and support redox sites. These conclusions are consistent with the tendency of Al2O3 and SiO2 supports to favor dimethoxymethane formation, while SnO2, ZrO2, and TiO2 preferentially form methylformate. These support effects on secondary reactions were confirmed by measured CH3OH oxidation rates and selectivities on physical mixtures of supported RuO2 catalysts and pure supports. Ethanol also reacts on supported RuO2 domains to form predominately acetaldehyde and diethoxyethane at 300-400 K. The bifunctional nature of these reaction pathways and the remarkable ability of RuO2-based catalysts to oxidize CH3OH to HCHO at unprecedented low temperatures introduce significant opportunities for new routes to complex oxygenates, including some containing C-C bonds, using methanol or ethanol as intermediates derived from natural gas or biomass.     

氮化硼负载的高分散Au-CuOx纳米颗粒用于低温CO氧化

负载型金催化剂显示出高的低温CO氧化活性,其催化性能与载体的性质密切相关.近年来,六方氮化硼作为一种新型催化材料引起了极大关注.已有研究表明,二维结构的氮化硼纳米片有利于传质扩散,并且暴露出大量的表面和边缘,作为新型非金属催化剂在烷烃氧化脱氢中表现出优异的活性.同时,CO氧化反应是强放热过程,氮化硼具有优良的导热性能,...     

The oxidation of HI at low temperatures and the heat of formation of HO2

The kinetics of the oxidation of hydrogen iodide (HI + O₂) at low temperature (414–499 K) in the gas phase by the method of iodination kinetics is complicated by a heterogeneous reaction between hydrogen iodide and oxygen. Present work leads to an upper limit for the bimolecular rate constant k₁ for the first and rate-determining step (1) These data are combined with an estimated A factor A₁ = 10^9.3±0.2 L/mol·s (assuming a tight linear I···H···O— transition state), to calculate the lower limit of the activation energy for the forward reaction E₁. This leads to a minimum value for the heat of formation of the HO₂ radical, ΔH_f298^°(HO₂) < 3.0 kcal/mol.     

Study of the state of nickel in ion-exchanged NiNaY zeolite by IR spectroscopy using molecular hydrogen adsorbed at low temperatures

The state of nickel cations in NiNaY zeolite subjected to thermal vacuum and oxidative-reductive treatment was analyzed using diffuse reflectance IR spectra of molecular hydrogen, CO, and hydroxy groups. In a sample dehydrated at 570 K, nickel forms oxide particles, which are presumably located in big cavities of a zeolite. Heating of the sample at 670 K results in decomposition of the oxide with the participation of hydroxy groups followed by the formation of stabilized Ni²⁺ cations in large cavities of the zeolite. Calcination of NiNaY zeolite in a hydrogen atmosphere at 730 K leads to Ni²⁺ cation reduction to the metal state and to the formation of acidic hydroxy groups. Nevertheless, Ni²⁺ cations can be regenerated by reoxidation of the reduced sample with oxygen at 670 K and further evacuation at 870 K. Thermal destruction of NiO in the reoxidized sample also proceeds on acidic hydroxy groups, but the temperature of this process is higher than the temperature of oxide decomposition in the initial NiNaY zeolite. The IR spectra of molecular hydrogen complexes with Ni²⁺ cations were observed for the first time. A considerable decrease in the H-H stretching vibration frequency for the coordinated molecules (up to 210 cm’1) can be explained by electron density redistribution between a hydrogen molecule and the cation in the complex     

Selective production of hydrogen from partial oxidation of methanol over silver catalysts at low temperatures

Hydrogen can be effectively and selectively produced from the partial oxidation of methanol over Ag/CeO(2)-ZnO catalyst at low temperatures (T(r) < 200 degree C).     

Chlorination of lignin at low temperatures

A high reactivity of the olefinic double bonds of the lignin (Lg) macromolecule in the reaction with molecular chlorine has been found which has permitted the chlorination of Lg to be carried out under cryogenic conditions at 150–250 K. The process takes place by a radical-chain mechanism with a length of the kinetic chain of approximately 1000 units. The bulk of the chlorine is consumed in the olefinic chains of the Lg. Other reaction products besides chlorolignin are hydrogen chloride and phenoxyl radicals, which have singlet ESR spectrum (ΔH=1.0−1.2 mT) and are retained in the chlorinated samples of Lg to ∼250 K. Institute of Chemical Physics, Academy of Sciences of the USSR, Chernogolovka, Moscow Province. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 671–676, September–October, 1990.     

CeO2纳米管负载Pd纳米颗粒催化CO低温氧化

高效负载型Pd催化剂的制备及其在CO低温氧化反应中的机理探究是近年来的研究热点.普遍认为,Pd催化剂上的CO氧化反应遵循Langmuir-Hinshelwood机理:首先,CO吸附于Pd物种表面;然后,CO与催化剂表面的晶格氧发生反应转化为CO2,反应发生在金属-载体界面.另外,高分散的Pd活性物种有利于CO氧化反应.同时载体的形貌、暴露的晶面、氧空位以及孔结构等都是影响催化剂活性的重要因素.CeO2纳米管具有独特的管状特征和较高的比表面积,是一种潜在的CO低温氧化催化剂载体.本文利用乙醇还原法,以CeO2纳米管为载体,制备不同Pd含量的Pd/CeO2-nanotube纳米催化剂,并利用N2吸附脱附、X射线衍射(XRD)、透射电子显微镜(TEM)、CO程序升温脱附(CO-TPD)、X射线光电子能谱(XPS)等表征手段,探索纳米催化剂载体形貌对CO氧化反应活性的影响.氮气吸脱附结果表明,Pd/CeO2-nanotube具有较高的比表面积(58.0 m2/g),且存在介孔结构.XRD表征发现,Pd/CeO2-nanotube的衍射峰对应立方萤石型结构的CeO2的(111),(200),(220),(311)等品面.TEM结果表明,Pd/CeO2-nanotube具有均匀的纳米管形貌,其外径为40-60 nm,Pd纳米颗粒均匀分散在其表面.CO-TPD结果表明,Pd/CeO2-nanotube在1 10℃附近具有很强的脱附峰,在370℃和600℃附近分别具有较宽和较弱的脱附峰,这表明该催化剂具有较多的吸附位,且具有很强的CO吸附能力;CO不可逆吸附量计算结果表明,该催化剂上的Pd具有很高的表面分散度(23.3％),Pd颗粒尺寸为7.3 nm.XPS表征显示,Pd以pd2+的形式分散于CeO2纳米管的表面,且与载体发生相互作用,存在Pd-O-Ce键;同时该催化剂表面存在丰富的Ce3+,为反应提供更多的氧空位.0.9Pd/CeO2-nanotube纳米催化剂在CO氧化反应中表现出优良的活性,能在100℃实现CO的完全转化;通过计算发现,该催化剂具有较高的TOF值(0.63 s-1),由Arrhenius 曲线可得到该催化剂的活化能为26.5 kJ/mol.综上可见:金属活性组分的尺寸和分散度、载体的结构特征、CO吸附能力以及金属-载体间的相互作用决定催化剂的性能.Pd/CeO2-nanotube的高比表面积有利于Pd的分散;其强CO吸附能力有利于CO吸附于Pd物种表面;催化剂表面丰富的Ce3+能为反应提供更多的氧空位,Pd-O-Ce键的形成能增强金属-载体间的相互作用,有利于CO与催化剂表面品格氧发生反应.同时催化剂介孔结构有利于反应气体和产物气体的吸附和扩散,因此,Pd/CeO2-nanotube纳米催化剂在CO氧化反应中表现出优良的活性.     

Diamond formation by reduction of carbon dioxide at low temperatures

This Communication reports a low-temperature diamond synthesis technique, in which diamonds (10-250 mum) can form at a temperature as low as 440 degrees C by reduction of dense CO2 with metallic Na. The X-ray diffraction pattern of a powder sample shows three reflection peaks, indexed with 111, 220, and 311, corresponding unambiguously to cubic diamond. The Raman spectrum of the product exhibits an intense first-order peak at 1332 cm-1, which is the characteristic signature of the cubic diamond, indicating the formation of well-crystallized diamond. Carbon dioxide is a nontoxic low-energy molecule, abundant on earth. This novel reduction method could allow studies of large-size diamond growth using CO2 as the carbon source.     

On sample positioning at low temperatures

A method is presented to measure the position of a small solid sample which is suspended by thin copper wires, from a microbalance, in a dewar that has been described earlier [1]. The shrinkage of the wires at low temperatures is reproducible to within ± 0.15 mm.     

Monodisperse CdSe nanorods at low temperatures

A new synthetic method is presented that allows the preparation of highly monodisperse CdSe nanorods (so called quantum rods) at relatively low temperatures (160 degrees C). This method is characterized by a high aspect ratio of the particles and affords good reproducibility. The morphology of the resulting nanorods was examined by means of transmission electron microscopy (TEM) and the electro-optic properties by means of fluorescence spectroscopy. The conditions of the reaction of nanoparticle growth were examined by varying the concentration of the organometallic precursors, the growth temperature, and the growth time. The experimental findings correspond well with previously published semiempirical pseudo-potential calculations.     

Radiation polymerization of acrolein at low temperatures

Radiation polymerization of acrolein in the presence of the additives such as 2-hydroxyethyl methacrylate, acrylic acid, and water at low temperatures (0–78°C) was studied. The polyacrolein resulting from the polymerization gave a small particlelike microsphere (0.5–5 μm in diameter). The rate of the polymerization reaction of acrolein appeared to be accelerated by the addition of a small amount of 2-hydroxyethyl methacrylate or acrylic acid. The particle size of the polyacrolein particle varied with the condition of the polymerization and increased or decreased with an increase in the addition concentration of 2-hydroxyethyl methacrylate or acrylic acid.     

低温下生物柴油的胶凝特性研究

利用流变仪在小振幅振荡剪切模式下对地沟油、花生油和大豆油生物柴油的胶凝特性进行了研究。结果表明,低温下生物柴油不仅具有冷却胶凝特性,还表现出明显的等温胶凝特性。分析了冷却速率和剪应力对地沟油生物柴油胶凝特性的影响。结果表明,静态降温时降温速率越大,生物柴油的胶凝温度越低,降温及恒温静置过程中同一温度下的胶凝结构越弱。相同降温速率下,生物柴油的胶凝结构和胶凝温度随剪应力的增加而降低,但经受不同剪应力作用的生物柴油恒温静置后胶凝结构相差不大。降温过程中施加的剪应力较小时,冷却胶凝结构随降温速率的增大而降低;剪应力较大时,冷却胶凝结构随降温速率的增大而加强。不管施加的剪应力多大,等温胶凝结构随降温速率的增大而加强。