SYNTHESIS OF DBN AND ITS CATALYTIC PERFORMANCE FOR METHANOL CARBONYLATION TO METHYL FORMATE

1 , 5-diazabicyclo['1, 3, 0]non-5-ene(DBN) has been synthesized in our laboratory, and its catalytic activity and selectivity for methanol carbonylation to methyl formate (MF) have been studied. The experimental results have demonstrated that the synthetic processes of DBN used for the present work are reasonable and feasible. The total yield of three steps of DBN synthsis is approximate to 80%. The activity evaluation has shown that DBN can effectively catalyze the carbonylation reaction of methanol in the presence of propylene oxide (PO) promoter. PO-promoted DBN is a novel catalytic system superior to sodium methoxide.     

三乙胺与咪唑在酯交换反应中的应用(英文)

采用三乙胺（TEA）和咪唑（IMZ）作催化剂,研究了甲醇与乙酸乙酯及苯甲酸乙酯的酯交换反应。实验结果表明,在没有环氧丙烷（PO）助剂时,三乙胺和眯唑的酯交换催化活性较低;当加入环氧丙烷助催化剂时,它们都有较高的酯交换催化活性。环氧丙烷助催化的三乙胺和咪唑催化剂的酯交换催化活性分别是无环氧丙烷助催化的三乙胺和咪唑催化剂的29倍和38倍考察了溶剂、温度催化剂及助剂浓度对催化剂的活性的影响。     

KOH/4A分子筛催化剂对环氧丙烷、二氧化碳和甲醇合成碳酸二甲酯反应的催化性能

 首次开发出对环氧丙烷、二氧化碳和甲醇合成碳酸二甲酯反应具有较高活性和稳定性的KOH/4A分子筛固体催化剂,考察了反应温度和催化剂活性组分KOH的负载量等因素对催化剂性能的影响. 在优化的实验条件下,环氧丙烷可以完全转化,碳酸二甲酯的收率为168%. 从实验结果推测,产物碳酸二甲酯是由环氧丙烷和二氧化碳加成生成碳酸丙烯酯,然后与甲醇发生酯交换反应生成的,甲醇对环氧丙烷和二氧化碳合成碳酸丙烯酯反应具有助催化作用.     

类水滑石催化酯交换反应活性、寿命及失活原因研究

研究了5种不同阳离子组合的类水滑石对碳酸二甲酯与苯酚酯交换反应的催化活性和ZnAl, MgAl水滑石的使用寿命. 结果显示, 类水滑石的催化性能与组成的阳离子性质有关: 三价阳离子的性质影响类水滑石的催化活性高低, 二价阳离子的性质则影响其使用寿命长短. 通过对失活原因的研究发现, 特征的层状结构形式是类水滑石具有活性的关键: 层状结构塌陷, 活性随之消失; 层状结构稳定, 使用寿命长. 当苯酚与碳酸二甲酯的摩尔比为2∶1, 催化剂的质量分数为原料总质量的1%, 反应时间8 h时, MgAl水滑石具有最优的催化性能: 碳酸二甲酯转化率51.8%, 酯交换产物选择性94.2%, 5次循环使用后催化活性保持稳定. 其催化性能明显优于文献报道的其它相关固体催化剂.     

Effective and recoverable homogeneous catalysts for the transesterification of dimethyl carbonate with ethanol: Lanthanide triflates

The catalytic activities of metal triflates were tested for the transesterification of dimethyl carbonate (DMC) with ethanol. It was found that yttrium triflate was the most efficient homogeneous catalyst. When the transesterification reaction was catalyzed by yttrium triflate at 76–80°C, 7 h, ethanol to DMC in 6: 1 molar ratio, 0.35 mol % of catalyst based on DMC, the conversion of DMC was 89.2%, the selectivities of diethyl carbonate (DEC) and ethyl methyl carbonate (EMC) were 85.1 and 13.6%, respectively. Yttrium triflate was reused 5 times for the transesterification without loss of its catalytic activity.     

Rh/Ph3PO催化剂体系的辛烯氢甲酰化反应性能考察和原位红外表征

考察了反应温度,ＣＯ／Ｈ２压力和Ｐ／Ｒｈ比等因素,对Ｒｈ／Ｐｈ３ＰＯ催化剂催化混合辛烷氢甲酰化反应活性的影响,优化出最佳反应条件,并采用加热加压的原位红外表征方法,跟踪了在１－辛烯反应中Ｒｈ／Ｐｈ３ＰＯ催化剂的活化、中间活性物种的产生和分解消失等瞬态变化情况。     

Enhanced catalytic activity of lipase encapsulated in PCL nanofibers

Use of biocatalysis for industrial synthetic chemistry is on the verge of significant growth. Enzyme immobilization as an effective strategy for improving the enzyme activity has emerged from developments especially in nanoscience and nanotechnology. Here, lipase from Burkholderia cepacia (LBC), as an example of the luxuriant enzymes, was successfully encapsulated in polycaprolactone (PCL) nanofibers, proven by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Evaluated in both organic and aqueous medium, the activation factor of the encapsulated enzymes in the hydrolysis reaction was generally higher than that in the transesterification reaction. Enhanced catalytic activities were found when 5-20 w/w % of LBC was loaded. The effect of different solvents pretreatment on the activity of immobilized LBC was also investigated. The highest activation factor was found up to 14 for the sample containing acetone-treated LBC/PCL (10 w/w %). The encapsulated lipase reserved 50% of its original activity after the 10th run in the transesterification reaction in hexane medium. The mechanism of activation of lipase catalytic ability based on active PCL nanofiberous matrix is proposed.     

Synthesis of Cyclic Carbonate Catalyzed by DBU Derived Basic Ionic Liquids

In this work, 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU), 1,5‐diazabicyclo[4.3.0]‐5‐nonene (DBN), and imidazole (MIM)‐derived bromide ionic liquids (ILs) were synthesized and used to catalyze the cycloaddition reactions of carbon dioxide (CO₂) with several kinds of epoxides to form cyclic carbonates. The DBU derived bromide ionic liquid system was found to have the best catalytic activity among all the tested ILs. The influences of reaction conditions (including temperature, pressure and reaction time) on the reaction of CO₂ to propylene oxide (PO) were studied to show the best conditions of 120 °C, 1 MPa, 2.5 h catalyzed by 2 mol% DBU‐derived bromide ionic liquid, with the conversion of PO and the selectivity of propylene carbonate (PC) reaching 99% and 99%, respectively. Under the optimum reaction conditions, the ionic liquid system could be reused at least five times without decrease in selectivity and conversion. NMR spectroscopy and DFT calculations were used to reveal the hydrogen‐bond interaction between ionic liquids and reagent, based on which the reaction mechanism was proposed.     

表面修饰多壁碳纳米管负载二氧化钛的制备及催化碳酸二甲酯与苯酚酯交换反应的性能

制备了表面修饰多壁碳纳米管负载TiO₂的催化剂,并将其应用于碳酸二甲酯与苯酚的酯交换反应. 采用X射线电子能谱、透射电子显微镜、低温N₂吸附-脱附和X射线衍射等对催化剂进行了表征. 结果表明,以低浓度的氨水（0.4%）代替去离子水作为沉淀剂时,制备的催化剂显示出更好的催化活性、分离性与重复使用性. 考察了TiO₂负载量、催化剂用量及反应时间对反应性能的影响. 在最佳反应条件下,苯酚转化率为42.5%,碳酸甲苯酯与碳酸二苯酯的总选择性达到99.9%以上. 经过4次重复使用后,催化剂的活性略有下降.     

二乙胺液相催化羰化制备二乙基甲酰胺

考察了反应压力、催化剂、助催化剂和反应温度对二乙胺（ＤＥＡ）液相羰基化合成二乙基甲酰胺（ＤＥＦ）反应的影响，确定了量佳反应条件．结果表明，ＣＯ分压（Ｐ∞）对反应有明显影响，生成ＤＥＦ的速率随Ｐ∞增大而增大；催化剂浓度对反应的速率影响较小，添加剂环氧丙烷（ＰＯ）对催化剂有较强的助催化作用，而且助催化作用随ＰＯ浓度的增加而增大，生成ＤＥＦ的选择性随ＰＯ浓度的增加而降低，温度对反应也有明显的影响，确定最佳反应条件为：ＣＯ分压小于６．０ＭＰａ，反应温度为８０℃至９０℃，催化剂浓度不大于０．０５ｍｏｌ／Ｌ，助催化剂ＰＯ浓度不大于４．０ｍｏｌ／Ｌ．此时选择性不小于９６％．     

二丁基锡磺酸酯催化酯交换合成碳酸二苯酯

研究了不同类型的酸催化剂对碳酸二甲酯与苯酚酯交换合成碳酸二苯酯的影响. 实验结果表明, 碳酸二甲酯与苯酚的酯交换反应是软碱(酚氧)亲硬酸(羰基碳)的反应; 硬Lewis酸比软Lewis酸、交界Lewis酸和Brönsted酸有更高的酯交换选择性. 将不同的磺基引入n-Bu₂SnO分子中, 制得一系列硬Lewis酸催化剂[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂[R=p-NH₂C₆H₄(Ⅰ), p-CH₃C₆H₄(Ⅱ), C₆H₅(Ⅲ), p-ClC₆H₄(Ⅳ), Me(Ⅴ), CF₃(Ⅵ)]. 在酯交换反应中, 由于磺基的强吸电子效应增强了[n-Bu₂Sn(OH)OS(O)₂R(H₂O)]₂中Sn的Lewis酸性, 其催化活性比n-Bu₂SnO的高, 而且磺基上取代基的吸电子效应越强, 催化剂中Sn的Lewis酸性越强, 催化活性越高, 但取代基的吸电子效应过强会降低其对酯交换反应的选择性.     

Zinc Glutarate Catalyzed Synthesis and Biodegradability of Poly(carbonate-co-ester)s from CO2, Propylene Oxide,and ϵ-Caprolactone

A zinc glutarate (ZnGA) catalyst was prepared from the reaction of zinc oxide and glutaric acid in dry toluene. ZnGA was found to exhibit a catalytic activity for the copolymerization of carbon dioxide (CO₂) and propylene oxide (PO) and the homopolymerization of PO but to reveal no catalytic activity for the homopolymerization of ϵ-caprolactone (CL). The ZnGA-catalyzed polymerization was extended for the terpolymerization of CO₂ with PO and CL, producing poly(propylene carbonate-co-ϵ-caprolactone)s (PPCCLs) with a reasonably high molecular weight in high yields. In the terpolymerization, PO and CL were used as both co-monomers and reaction media, after the reaction completed, the excess co-monomers were easily recovered and reused in the next terpolymerization batch. For the synthesized polymers, enzymatic and biological degradability were investigated.     

Na2WO4—H2O2酸体系催化氧化1—甲氧基—2—丙醇的研究

研究了Na2WO4-H2O2体系在催化氧化1-甲氧基-2-丙醇为甲氧基丙酮反应中的催化活性,发现酸助剂及添加物对甲氧基丙酮的收率有较大的影响。酸助剂中,NaHSO4对活性的促进作用最好;而H2PO4^-和HPO4^2-对体系的活性不利。极性小分子甲醇、乙腈可促进1-甲氧其-2-丙醇的氧化,提高甲氧基丙酮的收率。同时还考察了甲醇量对甲氧基丙酮收率的影响。     

Pd(PPh3)2Cl2CuCl2/AC催化乙醇氧化羰化合成碳酸二乙酯

采用浸渍法制备了乙醇直接气相氧化羰化合成碳酸二乙酯的负载型催化剂，并在连续流动固定床反应装置上评价了催化剂的反应活性，考察了催化剂活性组分、载体、活性组分负载量等因素对催化反应活性的影响。结果表明，活性炭是较好的载体，CuCl2是较好的铜盐前驱体，添加了Pd(PPh3)2Cl2的CuCl2/AC催化剂活性更高。当Cu负载量为9.0%，Pd负载量为0.5%时，催化剂的活性较好。在优化的催化剂制备条件下，乙醇的转化率超过30%，碳酸二乙酯（DEC）的选择性达到95%。     

Zn-La复合氧化物催化剂用于甲醇与碳酸乙烯酯酯交换反应的研究

ZnO、La₂O₃和Zn-La复合氧化物催化剂用于甲醇与碳酸乙烯酯反应制备碳酸二甲酯和乙二醇。催化剂采用共沉淀法进行制备,并用BET、XRD、TG-DSC、CO₂-TPD和Hammett滴定等对催化剂进行表征。考察了Zn-La物质的量比、焙烧温度,反应条件（反应温度、反应时间、催化剂用量等）对催化剂活性的影响。结果表明,ZnLa复合氧化物物质的量比为2：1,焙烧温度为500℃时,催化剂表现了较好的催化效果。催化剂的活性与催化剂表面的碱性强度和碱量有关,碱量越多催化剂的活性越好。     

Amberlyst-15型离子交换树脂催化γ-丁内酯酯交换反应的研究

从反应温度、时间、催化剂的用量、催化剂的重复使用、产物的分离等方面系统研究了γ-丁内酯与甲醇的酯交换反应,得到了优化的反应条件,即,反应温度为28℃,反应时间为10h,γ-丁内酯/甲醇/Amberlyst-15为0.9∶12.5∶12.5(V/V/m)。在该反应条件下,酯交换产物的分离产率达到77%。同时考察了γ-丁内酯与其它6种醇的酯交换反应,证明了在较高反应温度下,该树脂对其它醇仍有较好的催化活性(产物的质量百分数为50%～60%)。然而,随着醇体积的增大,反应的转化率逐渐下降。     

NaF含量对以水滑石结构为前驱体的固体碱催化剂F-Ca-Mg-Al及碳酸二甲酯合成的影响（英文）

以碳酸丙烯(PC)和甲醇为原料,经酯交换反应合成的多功能、环保的碳酸二甲酯(DMC)是一种绿色、节能的合成方法。CaO固体碱催化剂对该反应具有良好的催化性能,但其再生性不理想。以F-Ca-Mg-Al水滑石(LDHs)为原料,制备了一系列不同Na F用量的固体碱催化剂,并对其进行了表征和酯交换反应测试。与不加氟的FCMA-0催化剂相比,经氟改性后的催化剂的比表面积、碱量、催化活性等性能均有明显提高。催化活性由高到低依次为:FCMA-0.8> FCMA-0.4>FCMA-1.2> FCMA-1.6> FCMA-0,这与总碱位量和强碱位量一致。FCMA-0.8催化剂活性最好,与纯CaO催化剂的相当,PC转化率为66.8%,DMC选择性为97.4%,DMC收率为65.1%。在10次循环使用后,FCMA-0.8催化剂的DMC收率仅下降3.9%(CaO催化剂下降33.2%)。FCMA-0.8在PC与甲醇酯交换制DMC方面具有良好的工业应用前景。     

Reverse hydrolysis reaction in aqueous medium without any cosolvent

The synthesis of L-tyrosine fructosyl ester, from fructose and L-tyrosine methyl ester, was carried out by a transesterification reaction catalyzed by α-chymotrypsin in water without cosolvent. The effect of fructose concentration and temperature for the transesterification reaction were determined on both specific activities and product yield. The influence of the presence of fructose has been studied regarding α-chymotrypsin and L-tyrosine fructosyl ester stabilities. It appeared that an increase of temperature enhanced enzyme activity but slumped the product yield because of the very weak stability of tyrosine fructosyl ester.     

Zirconium-containing UiO-66 as an efficient and reusable catalyst for transesterification of triglyceride with methanol

Zirconium-based MOFs of the UiO family have attracted considerable attention due to their high thermal,chemical and mechanical stability. With the aim of further exploring the applications of zirconium-based UiO-66 in acid-catalyzed reactions and elucidating the effects of the defects in UiO-66 materials on their catalytic performances, in this work, a series of zirconium-containing UiO-66 samples were synthesized by varying the synthesis temperatures and BDC/Zr(terephthalic acid/ZrCl_4) ratios in the synthesis system.The synthesized UiO-66 samples were characterized by X-ray diffraction(XRD), N_2 adsorption-desorption,scanning electron microscopy(SEM), thermogravimetrical analysis(TGA), temperature-programmed desorption of NH_3(NH_3-TPD). Their catalytic performances were investigated in transesterification of tributyrin and soybean oil with methanol. The results showed that UiO-66 samples with different amounts of defects could be successfully prepared by varying the synthesis temperatures and/or the BDC/Zr ratios used in the synthesis system. The catalytic activities of the UiO-66 materials greatly depended on their linker defects and enhanced with the increase of the defect amount. The UiO-66 was an efficient catalyst for transesterification of tributyrin and soybean oil with methanol under mild reaction conditions and its catalytic activity was comparable to other solid acid catalysts reported in the literatures. The UiO-66 catalyst was relatively stable and could be reused.     

Zn-Al水滑石催化碳酸二甲酯与苯酚酯交换反应的研究

用共沉淀法制备了Zn-Al水滑石,并用于多相催化酯交换合成碳酸二苯酯的反应.研究了不同n(Zn)/n(Al)比的水滑石及其焙烧产物等对酯交换反应的催化活性.结果表明,Zn-Al水滑石催化剂对该反应的催化活性和选择性很高,当n(Zn)/n(Al)=3时,在150～180℃,n(PhOH)/n(DMC)=2,催化剂用量为反应物总质量的1.5%,在反应时间为12h的条件下,DMC的转化率达到55.9%,DPC和MPC的收率分别为25.3%和27.0%,酯交换产物的选择性达到93.6%.利用XRD,TG-DTA和TEM等手段对催化剂进行了表征.