Baryon resonance analysis from SAID

We discuss the analysis of data from πN elastic scattering and single pion photo- and electroproduction. The main focus is a study of low-lying non-strange baryon resonances. Here we concentrate on some difficulties associated with resonance identification, in particular the Roper and higher P11 states.     

Baryon resonance analysis from MAID

The unitary isobar model MAID2007 has been used to analyze the recent data of pion electroproduction. The model contains all four-star resonances in the region below W = 2 GeV and both single-Q~2 and Q~2 dependent transition form factors could be obtained for the Delta, Roper, D_(13)(1520), S_(11) (1535), S_(31) (1620), S_(11)(1650), D_(15)(1675), F_(15)(1680) and P_(13)(1720). From the complete world data base, including also π~- data on the neutron, also Q~2 dependent neutron form factors are obtained. For all transition form factors we also give convenient numerical parameterizations that can be used in other reactions. Furthermore, we show how the transition form factors can be used to obtain empirical transverse charge densities and our first results are given for the Roper, the S_(11) and D_(13) resonances.     

Baryon resonance analysis from MAID

The unitary isobar model MAID2007 has been used to analyze the recent data of pion electroproduction. The model contains all four-star resonances in the region below W = 2 GeV and both single-Q2 and Q2 dependent transition form factors could be obtained for the Delta, Roper, D13（1520）, S11 （1535）, S31 （1620）, $11（1650）, D15（1675）, F15（1680） and P13（1720）. From the complete world data base, including also π data on the neutron, also Q2 dependent neutron form factors are obtained. For all transition form factors we also give convenient numerical parameterizations that can be used in other reactions. Furthermore, we show how the transition form factors can be used to obtain empirical transverse charge densities and our first results are given for the Roper, the S11 and D13 resonances.     

Strategies for baryon resonance analysis

The analytic properties of scattering amplitudes provide a meeting point for experimental and theoretical investigations of baryon resonances. Pole positions and residues allow for a parameterization of resonances in a well-defined way which relates different reactions. The recent progress made within the Jiilich model is summarized.     

Strategies for baryon resonance analysis

The analytic properties theoretical investigations of baryon of scattering amplitudes provide a meeting point for experimental and resonances. Pole positions and residues allow for a parameterization of resonances in a well-defined way which relates different reactions. The recent progress made within the Jiilich model is summarized.     

Simulation and analysis of 13N+p elastic resonance scattering

The ^13 N＋p elastic resonance scattering has been studied at the secondary radioactive beam facility of CIAE in inverse kinematics via a thick-target method. The excitation function for the ^13N（p,p） scattering was obtained in the energy interval of Ecru ≈0.5-3.2 MeV with a ^13 N secondary beam of （47.8±1.5） MeV. Careful analysis of the secondary beam components and extensive Monte-Carlo simulations enable the resolution of the experimental proton spectra. The resonance parameters for five low-lying levels in ^14 O were deduced by Rmatrix fitting calculations with MULTI7 and SAMMY-M6-BETA. The present results show general agreement with those from a recent similar work, and thus confirm the observation of a new 0^- level at 5.7 MeV in 140 with an improved width of 400（45） keV.     

Simulation and analysis of 13N+p elastic resonance scattering

The 13N+p elastic resonance scattering has been studied at the secondary radioactive beam facility of CIAE in inverse kinematics via a thick-target method. The excitation function for the 13N(p,p) scattering was obtained in the energy interval of Ecm ≈0.5--3.2 MeV with a 13N secondary beam of (47.8±1.5) MeV. Carefulanalysis of the secondary beam components and extensive Monte-Carlo simulations enable the resolution of the experimental proton spectra. The resonance parameters for five low-lying levels in 140 were deduced by R- matrix fitting calculations with MULTI7 and SAMMY-M6-BETA. The present results show general agreement with those from a recent similar work, and thus confirm the observation of a new 0- level at 5.7 MeV in 14O with an improved width of 400(45) keV.     

SU (8) mass relations amongJ P=1/2+ and 3/2+ baryons

Mass relations among charmed and uncharmed baryons belonging to20 and20′ multiplets of SU(4) are derived in the framework of SU(8) symmetry, Spin singlet mass breaking interaction is found to give unsatisfactory results. Second order effects and spin triplet mass breaking interactions are studied to improve the situation.     

Stereographic intensity projections of elastically backscattered electrons in directional elastic peak electron spectroscopy: Experiment and theory

The stereographic intensity projections of elastically backscattered electrons for Au(1 1 1) were obtained by using directional elastic peak electron spectroscopy (DEPES). An enhancement of the recorded signal is observed when primary electrons with energies ranging from 0.5 to 2.0 keV strike the crystalline sample along the close-packed rows of atoms, proving the sensitivity of DEPES to the short atomic chain axial order. Besides, the obtained data reveal the threefold symmetry of the substrate. Experimental data are compared with the results of single scattering cluster (SSC) and multiple scattering (MS) calculations by means of contrast and an R-factor analysis. A satisfactory agreement between experiment and theory is found when the third scattering order is taken into account in MS approximation.     

Interference between resonance and potential scattering of high energy electrons from crystal surfaces

A solution of the tight-binding model of resonance diffraction of high-energy electrons from a crystal surface is found which describes the behaviour of the reflectivity in the vicinity of the intersection of a resonace parabola and a horizontal Kikuchi line. A simple analytical formula is obtained which makes it possible to evaluate the wave function for the case where both resonance and potential contributions to the reflectivity are of the same order of magnitude. The intensity of the specular reflection is shown to be directly related to the effective displacement Δ of the beam in the direction parallel to the surface, and a general formula suitable for evaluation of Δ from calculated RHEED rocking curves is derived.     

Quantitative interpretation of the low-loss electron signal

Low-loss electron spectra from clean elemental standards of C, Si, Cr, Fe, Cu, Ag, and Au are presented and theoretically interpreted with the aid of two basic theories. One of these assumes a simple elastic scattering and Bethe loss regime in which the low-loss signal arises from primary electrons that have undergone a single large-angle scattering event and whose energy loss is described by the continuous slowing down approximation. However, better qualitative agreement with experiment is obtained when multiple elastic scattering is considered via the transport approximation for electron deflection. The simple low-loss electron detector used to obtain the data is also described.     

Crystalline structure of the Au(1 1 1) surface revealed by stereographic intensity DEPES maps

The intensity of elastically backscattered electrons at the primary electron beam energy 1.9 keV was used to obtain a stereographic map of Au(1 1 1) by means of the directional elastic peak electron spectroscopy (DEPES). An experimental result is compared with the theoretical data obtained by using multiple scattering calculations (MS) performed for both not-reconstructed and model-reconstructed clusters. The lateral lattice misfit of the first layer leads to quantitative changes of theoretical intensities showing a sensitivity of DEPES to the short atomic chain axial order. This comparison proves that a main contribution of the experimental contrast originates from a higher background level. Moreover an anisotropy of the inelastic mean free path is discussed in the paper.     

弹性壳结构静力与动力分析的光滑粒子法

本文通过采用移动最小二乘函数作为近似函数 和完全拉格朗日方程作为近似方程来改善光滑粒子法的稳定性和数值精度; 在此基础上, 提出了壳结构静力分析的光滑粒子法, 并完善了壳结构动力分析方法; 最后, 采用国际公认的壳结构的标准测试模型对静力和动力问题分别进行了验证, 所得结果与已有数据吻合良好, 证明了本文数值模型的有效性和可靠性, 为光滑粒子法进一步在裂纹、破碎等非线性壳结构中的应用提供参考. 关键词： 弹性壳 静力与动力分析 光滑粒子法 完备性和稳定性     

Numerical analysis of stimulated inelastic scatterings in ytterbium-doped double-clad fiber amplifier with multi-ns-duration and multi-hundred-kW peak-power output

We investigate the stimulated Brillouin scattering (SBS) and the stimulated Raman scattering (SRS) in an ytterbium-doped double-clad fiber amplifier that outputs optical pulses with multi-ns-duration and multi-hundred-kW peak-power. The ytterbium-doped double-clad fiber amplifier is simulated by a model which is composed of a set of propagation-rate equations. The simulated results show that SBS and SRS will deform the output signal pulse in both the time domain and the spectral domain, and degrade the performance of the ytterbium-doped double-clad fiber amplifier seriously. It is shown in our simulation that the troublesome SBS can be effectively suppressed by broadening the signal linewidth to a critical value of 0.07 nm in our calculation, and the effect of SRS can be suppressed using a large-mode-area fiber with proper length. The model and the simulated results are very useful for designing an ultra-high-power ytterbium-doped double-clad fiber amplifier.     

The role of the Λ(1405) in the pp → pK<Superscript>+</Superscript>Λ(1405) reaction

We report a theoretical study of the pp → pK ⁺Λ(1405) reaction, which was recently investigated at COSY-Jülich by using a 3.65GeV/c circulating proton beam incident on an internal hydrogen target. The reaction is driven by single-kaon exchange, single-pion exchange, and single-rho exchange terms which have very different shapes due to the two-pole structure of the Λ(1405) and the presence of background terms. The shape for the sum of the three contributions, as well as the total cross-section, are consistent with present data within experimental and theoretical uncertainties, using reasonable form factors for the meson-baryon vertices.     

Determination of lead in Yellow River using ammonium molybdate as a molecular probe by resonance light scattering technique

A novel method for the determination of trace lead in Yellow River using ammonium molybdate (AM) as a molecular probe based on resonance light scattering (RLS) has been developed. In the presence of KHC₈H₄O₄-NaOH buffer solution, Pb²⁺ can react with AM to form an association, which results in the significant enhancement of RLS intensity and the appearance of the corresponding RLS characteristics. The enhanced RLS intensity is directly proportional to the concentration of Pb²⁺ in the range of 0.01-1.0 μg mL⁻¹. The detection limit can achieve 1.89 ng mL⁻¹. Moreover, the characteristics of RLS spectra of the complexes, the optimum conditions and the influencing factors have been investigated. The method has high selectivity and sensitivity, and was applied to the determination of Pb²⁺ in Yellow River with satisfactory results, which was in agreement with that of atomic absorbance spectrometry (AAS).     

Symmetry changes in He scattering from a Si(111) surface exposed to H atoms

Changes which occur on, and just below, the surface of a Si(111)-(7×7) crystal when it is dosed with H atoms are complex and still not well described. Measurements of He atom diffraction (HAS) from this surface in the [ 2 ] or [ 11] directions give scans which are asymmetric about the specular angle. The scans become symmetric when the surface is exposed to doses of H atoms sufficient to give coverages of 0.1 to 14 ML, if the atoms all stick. This means that the 3-fold rotational symmetry of the clean surface becomes 6-fold after the addition of the H atoms and shows that the faulted and unfaulted regions of the DAS model become equivalent as they are averaged by the He beam, although the large 49-atom unit cell remains. Thus this surface is not Si(111)-H(1×1), the equilibrated product of H-atom addition which is about 0.3 eV lower in energy, but a metastable intermediate state(s).

Comparison of results from HAS with those from other techniques, such as scanning tunneling microscopy, help to characterize this surface.     

An exploration in acoustic radiation force experienced by cylindrical shells via resonance scattering theory

In nonlinear acoustic regime, a body insonified by a sound field is known to experience a steady force that is called the acoustic radiation force (RF). This force is a second-order quantity of the velocity potential function of the ambient medium. Exploiting the sufficiency of linear solution representation of potential function in RF formulation, and following the classical resonance scattering theorem (RST) which suggests the scattered field as a superposition of the resonant field and a background (non-resonant) component, we will show that the radiation force is a composition of three components: background part, resonant part and their interaction. Due to the nonlinearity effects, each part contains the contribution of pure partial waves in addition to their mutual interaction. The numerical results propose the residue component (i.e., subtraction of the background component from the RF) as a good indicator of the contribution of circumferential surface waves in RF. Defining the modal series of radiation force function and its components, it will be shown that within each partial wave, the resonance contribution can be synthesized as the Breit-Wigner form for adequately none-close resonant frequencies. The proposed formulation may be helpful essentially due to its inherent value as a canonical subject in physical acoustics. Furthermore, it may make a tunnel through the circumferential resonance reducing effects on radiation forces.     

水泥老化过程中水动态的准弹性中子散射(QENS)谱分析

准弹性中子散射(quasi-elastic neutron scattering, QENS)实验是研究水泥老化过程中水动态的一种新颖的实验方法.本文利用老化时间分别为7, 14和30 d水泥样品的QENS谱实验数据, 通过应用四个高斯项的和的能量分辨函数R(Q, E)代替一个高斯项的能量分辨函数来改进经验扩散模型(empirical diffusion model, EDM), 再进行非线性最小二乘拟合.由此导出水泥样品中水动态的相关物理参数: 不动水数密度A, 自由水指数FWI=B₁/(A+B₁+B₂), 洛伦兹函数的半高宽Γ, 移动水跳跃之间的平均停留时间τ ₀及自扩散系数D_t, 而且可得出更为精准的QENS谱拟合曲线.拟合得到的物理参数可定量描述水泥老化过程中水动态过程, 从而为QENS实验在水泥老化过程中水动态研究的应用提供一种合理实用的谱分析方法.     

Recent results on hadron spectroscopy from BES

The BES-Ⅲ Detector is a very versatile multipurpose device located at the Institute of High Energy Physics(IHEP) in Beijing,China.Concerning the physics program it ties stringently up to the past BES and BES-Ⅱ experiments.Since start of the data taking in the middle of 2008 the accumulated dataset of 200·106 J/ψ events and 100·106 ψ events already exceeds the world data on these resonances.In addition to studies of the charmonium systems the data offers great opportunity for investigations in the light hadron sector.In detail it will be reported about the confirmation of the enhancement in p invariant mass in radiative J/ψ decays,the search for decays Y(2175) → K0 K0,observation of a charged κ± in K±π0 and observation of a new excited baryon N(2065) decaying to pπ0 and charged conjugate.The first result is based on data taken by BES-Ⅱ and BES-Ⅲ,the latter three on data collected by BES-Ⅱ only.