Liquid-liquid extraction separation of zinc and cadmium with 1-phenyl-3-methyl-4-acyl-5-pyrazolones and tri-n-octylphosphine oxide

The extraction of zinc and cadmium with a mixture of a 1-phenyl-3-methyl-4-acyl-5-pyrazolone and trioctylphosphine oxide (TOPO) in various solvents is described. The extraction constants for systems based on eight 4-acyl compounds (C₃C₁₈) are reported. The 1-phenyl-3-methyl-4-stearoyl-5-pyrazolone/benzene system is most effective for the mutual separation of zinc and cadmium at pH 4.5; 20 μg of zinc can be separated efficiently from 20 mg of cadmium.     

Studies on extraction of manganese(II) with 1-phenyl-3-methyl-4-acyl-5-pyrazolone

The extraction of Mn(II) with 1-phenyl-3-methyl-4-acyl-5-pyrazolone (HA) in MIBK has been studied. Mn(II) is extracted as MnA(2). The extraction constant for each 4-acyl compound was calculated. The effect of temperature on the extraction of Mn(II) has also been investigated.     

Solvent extraction of calcium(II) and strontium(II) with 1-phenyl-3-methyl-4-acyl-5-pyrazolone

The extraction of calcium and strontium from aqueous solution with 1-phenyl-3-methyl-4-acyl-5-pyrazolone (C_n) in MIBK and benzyl alcohol has been studied. In the extraction of Sr with 4-acyl derivatives-MIBK systems, the pH_1/2 values change with increasing the length of acyl chain in the derivatives. The reagent C₃ is more suitable than the other reagents for the separation of Ca and Sr, using MIBK as solvent.     

Extraction of thorium(IV) by a mixture of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone and tri-n-octyl phosphine oxide

The extraction behavior of Th(IV) from dilute nitric as well as perchloric acid medium using 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) and its mixture with tri-n-octyl phosphine oxide (TOPO) was investigated. The species of the type Th(X)(PMBP)₃·(HPMBP) and Th(X)(PMBP)₃·(TOPO) were extracted for the binary and ternary extraction systems, respectively, where X=NO₃− or ClO₄−. The presence of 1.25·10⁻⁵M Th carrier in the aqueous phase resulted in the extracted species of the type of Th(PMBP)₄ and Th(PMBP)₄·(TOPO), respectively. The extraction constant (logk _ex ) for the binary species Th(PMBP)₄ was found to be 6.89±0.01 while the overall extraction constant (logK) for the ternary species Th(PMBP)₄·(TOPO) was calculated to be 13.17±0.06.     

Mixed ligand chelate extraction of lanthanides with 1-phenyl-3-methyl-4-octanoyl-5-pyrazolone systems

The equilibrium extraction behavior for a series of representative trivalent lanthanide ions, Pr, Eu, and Yb, using chloroform solutions containing 1-phenyl-3-methyl-4-octanoyl-5-pyrazolone (HPMOP), either alone or combined with 1,10-phenanthroline (phen), trioctylphosphine oxide (TOPO) or methyltrioctylaromonium chloride (R₃R'NCl), is studied. The results demonstrate that these lanthanides are extracted as LnP₃, or in the presence of phen or TOPO. as LnP₃ · phen or LnP₃ · TOPO, or in the presence of R₃R'NCl, as R₃R'NLnP₄. The effects of phen, TOPO, and R₃R—NCl on the extraction of lanthanide ions with HPMOP are more pronounced than their effects with 8-quinolinol or 5,7-dibromo-8-quinolinol.     

Steric effect of ortho-substituents of 1-phenyl-3-methyl-4-aroyl-5-pyrazolones on the synergic extraction of lutetium with trioctylphosphine oxide

The substituent effect of ortho-substituted 4-aroyl derivatives of 1-phenyl-3-methyl-5-pyrazolones (HA) on the adduct formation reaction between their lutetium chelates and a neutral ligand, trioctylphosphine oxide (TOPO, L), in benzene was studied using a liquid-liquid extraction system. The lutetium 4-aroyl-5-pyrazolonates react with TOPO to form LuA₃L and LuA₃L₂ types of adducts. An obvious steric hindrance of the terminal group on the adduct formation reaction was observed. Linear relationships between the acid dissociation constant of the ortho-substituted 4-aroyl-5-pyrazolone derivatives and those of the corresponding benzoic acids, between the extraction constants of lutetium and the acid dissociation constants of pyrazolones and between the adduct formation constants of TOPO and the acid dissociation constants of pyrazolones could be obtained.     

Synergistic extraction of uranium(VI) with 1-phenyl-3-methyl-4-acylpyrazolone-5 and neutral extractants

The synergistic extraction of uranium(VI) from hydrochloric acid solution with five chelating agents: 1-phenyl-3-methyl-4-benzoylpyrazolone-5 (PMBP), 1-phenyl-3-methyl-4-acetylpyrazolone-5 (PMAP), 1-phenyl-3-methyl-4-(2-chlorobenzoyl)pyrazolone-5 (PMCBP), 1-phenyl-3-methyl-4-(p-nitrobenzoyl)pyrazolone-5 (PMNBP) and 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5 (PMTFP) plus the neutral extractants tributylphosphate (TBP), dioctyl sulfoxide (DOSO) and trioctylphosphine oxide (TOPO) in chloroform has been investigated. The extraction coefficients have been found to be greater for such mixtures than the individual component. The formulas of the extracted species have been determined to be UO₂A₂B (where HA = chelating agent, B = neutral extractant). Extraction power of these chelating agents increases as follows: PMCBP>PMNBP>PMTFP=PMBP>PMAP. Synergistic extraction power of the neutral extractants increases as follows: TOPO>DOSO>TBP. The extraction equilibrium constants have been calculated. The mechanism of the synergistic extraction and possible structure of the extracted species are discussed.     

The separation of zinc(II) and cadmium(II) by liquid-liquid extraction

The extraction of Zn(II) and Cd(II) from thiocyanate solutions with bis-2-ethylhexyl sulphoxide (B₂EHSO) in benzene as an extractant has been studied by tracer techniques. For comparison, extraction has also been carried out with tributylphosphate (TBP). The extraction data have been analysed by both graphical and theoretical methods by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexes extracted into the organic phase. The results demonstrate that Zn(II) is extracted as Zn(SCN)₂·2B2EHSO and Zn(SCN)₂·2TBP. In the case of Cd(II), the extracted species are Cd(SCN)₂·4B2EHSO/4TBP. The synergistic extraction of Zn(II) and Cd(II) with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 (HPMBP) and B2EHSO or TBP or trioctylphosphine oxide (TOPO) from acetate buffer solutions has also been investigated. Zn(II) is extracted as Zn(PMBP)₂·B2EHSO/TBP/TOPO. On the other hand, Cd(II) is found to be not extracted with these mixed-ligand systems under the experimental conditions. These results also demonstrate the mutual separation of Zn(II) and Cd(II) using the synergistic extraction with HPMBP in the presence of various neutral oxodonors.     

Solvent extraction of lanthanum(III), europium(III) and lutetium(III) with fluorinated 1-phenyl-3-methyl-4-benzoyl-5-pyrazolones into chloroform

A series of chelating reagents, 1-phenyl-3-methyl-4-(2-fluorobenzoyl)-5-pyrazolone, 1-phenyl-3-methyl-4-(3-fluorobenzoyl)-5-pyrazolone and 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone, has been synthesized. The extraction of Ln(III), (Ln = La, Eu and Lu) into chloroform with these reagents at 30 +/- 1 degrees has been studied. The composition of the complexes extracted has been determined by the slope method, and the extraction constants K(ex), were measured. The presence of the fluorine atom in the reagents does not make the K(ex), values much different from those obtained with the parent pyrazolone.     

1-苯基-3-甲基-4-甲酰基-5-吡唑啉酮Cu(Ⅱ)配合物的合成及晶体结构

A novel Cu(Ⅱ) complex of 1-phenyl-3-methyl-4-acyl-5-pyrazolone was synthesized and crystallogra-phically characterized. The single-crystal structure of the complex reveals that the crystal belongs triclinic, space group P1 with cell parameters a=0.938 7(4) nm, b=1.124 4(5) nm, c=1.222 3(5) nm, α=99.538(7)°, β=104.049(8)°, γ=113.806(6)°, and Z=2, V=1.093 3(8) nm³. Cu(Ⅱ) ion is coordinated by two 1-phenyl-3-methyl-4-acyl-5-pyrazolone ligands, and one methanol molecule giving a coordination number of five, the coordination polyhedron around Cu(Ⅱ) ion can be described as a square pyramid. Two complex units link to each other through the hydrogen-bonding interactions to form a dimer. Meanwhile, a staircase-like layer structure was built up by offset face-to-face π…π stacking interactions and weak interactions between the dimers. CCDC: 625422.     

Adduct formation properties of mono- and bidentate phosphine oxide compounds in the liquid—liquid extraction of some divalent metals with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

The bidentate phosphine oxide compounds bis(diphenylphosphinyl)methane (BDPPM) and bis(diphenylphosphinyl)ethane (BDPPE) were synthesized and the liquid—liquid extraction equilibria of some divalent metal ions such as Co(II), Ni(II), Zn(II) and Cd(II) with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and the neutral phosphine oxide compounds were investigated. BDPPM was found to be much more powerful than BDPPE and the monodentate neutral ligand trioctylphosphine oxide (TOPO). The composition of the extracted species were determined by a graphical method to be M(PMBP)₂(TOPO)_s (s = 2 for Co, Ni, Cd and s = 1 for Zn), M(PMBP)₂(BDPPM) and M(PMBP)₂(BDPPE). The adduct formation constants between the acylpyrazolone chelates and the neutral ligands were determined and are discussed in terms of the molecular structure.     

Solvent extraction of alkaline earth metals,and lithium with 1-phenyl-3-methyl-4-acylpyrazol-5-ones and trioctylphosphine oxide

The synergic extraction of magnesium, calcium, strongium, barium and lithium into cyclohexane or benzene containing 1-phenyl-3-methyl-4-acyl-pyrazol-5-one (HA) and tri-n-octylphosphine oxide (TOPO) was investigated as a function of pH, HA and TOPO concentration. The extracted species when the 4-benzoyl compound was used, were MA₂(TOPO)₂ (M = Mg, Ca, Sr), BaA₂(TOPO)₃ and LiA(TOPO)₂. When the 4-trifluoro-acetyl derivatives was used, the extracted species were the same except for SrA₂(TOPO)₃. Extraction constants for the synergic extractions were calculated.     

Solvent extraction of divalent metal ions with azacrown ether substituted acylpyrazolones

Novel 4-acyl-5-pyrazolones having aza-15-crown-5 (HPMP-A15C5) and aza-18-crown-6 (HPMP-A18C6) moieties as an intramolecular synergist have been synthesized by simple coupling reactions between 1-phenyl-3-methyl-4-chloroacetyl-5-pyrazolone and the corresponding azacrown ethers. The solvent extraction of the divalent metal ions (Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+)) were examined. Synergistic extractions with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and benzocrown ethers were also examined for a comparison. Extractions with the novel acylpyrazolones were unique and quite different from those with HPMBP and benzocrown ethers. The synergistic effect with benzocrown ethers was low, and an obvious difference brought by the ring size was not observed. The extractions of the divalent metal ions with HPMP-A18C6 were generally enhanced, as compared to those alone with HPMBP; on the contrary, the extractions with HPMP-A15C5 were relatively poor.     

Solvent extraction of lithium and sodium with 4-benzoyl or 4-perfluoroacyl-5-pyrazolone and TOPO

The synergic solvent extraction of lithium and sodium into benzene or cyclohexane with 4-benzoyl or 4-perfluoroacyl-5-pyrazolone and trioctylphosphine oxide (TOPO) has been investigated. Quantitative extraction (>99%) of lithium, which is one of the most poorly extractable metal ions, can be achieved with 1-tolyl-3-methyl-4-perfluoroacyl-5-pyrazolone and TOPO. The extraction of sodium is somewhat poorer than that of lithium under the same conditions. The perfluoroacyl group at the 4-position of the pyrazolone ring enhances the extraction and increases the maximum percentage extracted. Cyclohexane is found to be suitable for a quantitative extraction as an organic phase when the reagents are soluble in it. Improved separation of lithium and sodium can be attained when they are extracted into benzene.     

Catalytic Potential of Pyrazolone Based Dioxidomolybdenum(VI) Complexes for Multicomponent Biginelli Reactions,Epoxidation of Olefins and Oxidative Bromination of Phenol Derivatives

Three different types of dioxidomolybdenum(VI) complexes of 4-acetyl-3-methyl-1-phenyl-5-pyrazolone (Hmp, I )), 3-methyl-1-phenyl-4-propionyl-5-pyrazolone (Hpp, II ), 4-butyryl-3-methyl-1-phenyl-5-pyrazolone (Hbutp, III ), and 4-isobutyryl-3-methyl-1-phenyl-5-pyrazolone (isobutp, IV ) have been isolated and characterized by various spectroscopic (FT-IR, UV/Vis, ¹H and ¹³C NMR) techniques, thermal analysis and single crystal X-ray analysis. These complexes adopt a distorted six-coordinate octahedral geometry where ligands act as bidentate, coordinating through the two O atoms. These complexes have been used as catalysts to explore a single pot multicomponent (benzaldehyde or its derivatives, urea/thiourea and ethyl acetoacetate/phenyl acetoacatate) Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one and 3,4-dihydropyrimidin-2-(1H)-thione based biomolecules under solvent-free conditions. Presence of H₂O₂ improves the yield of dihydropyrimidin-2-(1H)-one but it acts as poison for the later molecule. Epoxidation of internal and terminal alkenes mainly resulted in the formation of the corresponding epoxide. The catalytic oxidative bromination of thymol, a reaction facilitated by vanadium dependent haloperoxidases, resulted in the formation of three product namely 2-bromothymol, 4-bromothymol and 2,4-bromothymol. Other phenol derivatives have also been brominated effectively.     

Mass spectra of indazolones and pyrazolones—II: 5-pyrazolones

The mass spectral fragmentations of 3-methyl-5-pyrazolone (I), 3-methyl-5-pyrazolone-1-d₁ (II), 3-methyl-5-pyrazolone-1,4,4-d₃ (III), 1-acetyl-3-methyl-5-pyrazolone (IV), 3-methyl-5-ethoxy-pyrazole (V), 3,4-dimethyl-5-pyrazolone (VI), 1,3-dimethyl-5-pyrazolone (VII), 1-acetyl-5-acetoxy-3,4-dimethylpyrazole (VIII), 1,2,3-trimethyl-5-pyrazolone (IX), 3,4,4-trimethyl-5-pyrazolone (X), 3,4,4-trimethyl-5-pyrazolone-1-d₁ (XI), 3-phenyl-5-pyrazolone (XII), 2-acetyl-3-phenyl-5-pyrazolone (XIII) and 5-acetoxy-3-phenylpyrazole (XIV) are reported. Comparison is made between the mass spectra of 5-pyrazolones and 3-indazolones. As for the latter compounds initial loss of ·N₂R is preferred to loss of ·CHO, and is followed by loss of CO. The [M ? 1]ions are intense in the C-methyl substituted pyrazolones, and unlike the 3-indazolones, the pyrazolones do not show any significant loss of HCN from these ions. The mass spectra distinguish between certain isomeric 5-pyrazolones.     

Estimation of rare and radioactive constitutents in samples of Indian tobacco with the aid of low-level beta-counter

The extraction of radium and barium into a mixture of 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPy) and trioctylphosphine oxide (TOPO) in n-hexane or cyclohexane was investigated as a function of pH and TOPO concentration. It was found that the synergistic enhancement of the extraction is caused by the formation of mixed complexes of type M(Py)₂ (TOPO)₃ and the overall extraction constants of both complexes were calculated.     

Synergistic extraction of alkaline earth cations with 3-phenyl-4-benzoyl-isoxazol-5-one and tri-n-octylphosphine oxide in toluene

The synergistic extraction of alkaline earth cations from 1M NaNO₃ aqueous solutions with 3-phenyl-4-benzoylisoxazol-5-one (HPBI) and tri-n-octylphosphine oxide (TOPO) in toluene at 25°C has been studied. The extraction efficiency follows the order Ba²⁺<Sr²⁺<Ca²⁺<Mg²⁺, which is the same as that previously observed with 1-phenyl-3-methyl-4-benzoyl-pyrazol-5-one (HPMBP). The extraction occurs at a lower pH range than with HPMBP because of the higher acidity of HPBI. The extracted species are M(PBI)₂(TOPO) _x withx=2 for M=Mg, Ca, Sr and Ba (logK _1,2,2=3.91, 1.18 and 0.29 respectively) and withx=3 for M=Sr and Ba (logK _1,2,3=3.28 and 2.07 respectively). The strong interactions which occur between HPBI and TOPO (logK _int=1.84) have been considered in the extraction constant calculations..     

Recovery of plutonium from oxalate supernatant using 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

Summary Extraction of Pu(IV) from oxalate supernatant was carried out employing 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) in xylene as extractant. The conditions for quantitative extraction were determined by the variation of ligand, oxalic acid and nitric acid concentration. Quantitative stripping was achieved using a mixture of 0.4M oxalic acid and 0.4M ammonium oxalate. Extraction of Pu(IV) from synthetic oxalate supernatant solution containing 3M nitric acid and 0.2M oxalic acid was investigated under various loading conditions employing 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone in xylene as extractant. Under uranium loading conditions the Pu extraction decreased significantly while with increased Pu loading whereas the D_Pu value was influenced marginally. The effect of a redox reagent on Pu extraction was also investigated.     

Synergistic extraction of U(VI) and Th(IV) from nitric acid with 4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione (HBMPPT) and tri-n-octylphosphine oxide (TOPO) in toluene

The extractant HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) was synthesized from HBMPP. Its m.p. was 106–108°C. The synergistic extraction of U(VI) and Th(IV) from nitric acid solution by HBMPPT and TOPO in toluene was studied. The extraction ability of HBMPPT was not so high as that of its parent (HBMPP), but when a little tri-n-octylphosphine oxide (TOPO) was added the ability to extract U(VI) and Th(IV) was seriously improved. The synergistic extracted complexes may be presented as UO₂NO₃·BMPPT·TOPO and UO₂(BMPPT)₂·TOPO for U(VI), and Th(NO₃)₃·BMPPT·TOPO and Th(NO₃)₂(BMPPT)₂·TOPO for Th(IV) respectively.