光诱导雄黄矿物同质异象变化的显微成像拉曼散射研究

利用拉曼光谱研究了激光照射诱导雄黄的同质异象变化,这些结果证实了下面的反应：由于As—As键相对较弱,首先As—As键被破坏,有1个S原子加入到As—As键中,形成As—S—As键。此时由As₄S₄(Realgar类型)变化为As₄S₅相,而As₄S₅处于不稳定状态,As₄S₅相变化为 Pararealgar时有1个S原子从As—S—As键中释放出来。释放出来的S原子又加入到另外1个As₄S₄(Realgar)中,引起As₄S₄(Realgar)相变化为As₄S₅,As₄S₅进而分裂为1个S原子和As₄S₄(Pararealgar类型)。照射促进雄黄经由 As₄S₅ 分子被转换成副雄黄。     

Raman spectroscopy of minerals and mineral pigments in archaeometry

Minerals, as raw structural materials or pigments, play a fundamental role in archaeometry, for the understanding of nature, structure and status of an artefact or object of interest for cultural heritage. A detailed knowledge of the mineral phases is crucial to solve archaeological problems: Raman spectroscopy is a powerful investigation technique and has been applied extensively in the last 30 years on mineral identification and on pigment degradation. Here we report an updated review, covering the last decade, of the applications of Raman techniques to issues in which raw minerals, including mineral pigments, are involved. Particular attention is devoted to cases where the Raman analysis of minerals is deeper than a simple identification of the phases present in an archaeological or artistic object. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantitative mineral analysis using Raman spectroscopy and chemometric techniques

This paper presents four different ways to generate quantitative and qualitative mineral information out of a Raman mapping experiment. The results of the four methods are compared against each other, and the advantages and disadvantages are pointed out. The combination of the point‐counting method with chemometric approaches is presented for the first time. The method with its different possible techniques is explained in detail. It will be shown that this technique works best for minerals. Copyright © 2009 John Wiley & Sons, Ltd.     

Microbiological identification by surface-enhanced Raman spectroscopy

New methods for pathogens identification are of growing interest in clinical and food sectors. The challenge remains to develop rapid methods that are more simple, reliable, and specific. Surface-enhanced Raman spectroscopy (SERS) appears to be a promising tool to compete with current untargeted identification methods. This article presents the intensive research devoted to the use of SERS for bacterial identification, from the first to the very recent published results. Compared to normal Raman spectroscopy, the introduction of nanoparticles for SERS acquisition introduces a new degree of complexity. Bacterial Raman fingerprints, which are already subject to high spectral variability for a given strain, become then very dependent on numerous experimental parameters. To overcome these limitations, several approaches have been proposed to prepare the sample, from the microbiological culture conditions to the analysis of the spectrum including the coupling of nanoparticles on the bacterial membrane. Main strategies proposed over the last 20 years are examined here and discussed in the perspective of a protocol transfer towards industry.     

Breast cancer diagnostics by Raman spectroscopy

This paper presents new results for the normal, malignant and benign tissues by Raman spectroscopy. To the best of our knowledge, this is one of the most statistically reliable research (321 spectra from 44 patients) on Raman spectroscopy-based diagnosis of breast cancers among the world's women population. The paper demonstrates that Raman spectroscopy is a powerful medical diagnostic tool with the key advantage in breast cancer research.     

Application of portable Raman spectroscopy and benchtop spatially offset Raman spectroscopy to interrogate concealed biomaterials

In this paper, we demonstrate the ability of portable Raman spectroscopy and benchtop spatially offset Raman spectroscopy (SORS) techniques to rapidly identify real and fake ivory samples. Both techniques were able to identify exposed genuine from fake ivory samples. In contrast to conventional Raman spectroscopy, SORS was, in addition, able to identify ivory concealed by plastics, paints, varnishes and cloth. Application of the SORS technique allows the interrogation of biomaterial samples through materials in which conventional Raman spectroscopic instrumentation cannot penetrate. Copyright © 2009 John Wiley & Sons, Ltd.     

Applications of Raman spectroscopy in herbal medicine

Raman spectroscopic techniques are a group of chemical fingerprint detection methods based on molecular vibrational spectroscopy. They are compatible with aqueous solutions and are time saving, nondestructive, and highly informative. With complementary and alternative medicine (CAM) becoming increasingly popular, more people are consuming natural herbal medicines. Thus, chemical fingerprints of herbal medicines are investigated to determine the content of these products. In this study, I review the different types of Raman spectroscopic techniques used in fingerprinting herbal medicines, including dispersive Raman spectroscopy, resonance Raman spectroscopy, Fourier transform (FT)–Raman spectroscopy, surface-enhanced Raman scattering (SERS) spectroscopy, and confocal/microscopic Raman spectroscopy. Lab-grade Raman spectroscopy instruments help detect the chemical components of herbal medicines effectively and accurately without the need for complicated separation and extraction procedures. In addition, portable Raman spectroscopy instruments could be used to monitor the health and safety compliance of herbal products in the consumer market.     

Quantitative analysis of solid-phase mixtures by Raman spectroscopy

We propose a method for using Raman spectroscopy to determine the phase compositions and concentrations in solid-phase equilibrium mixtures. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 3, pp. 416–418, May–June, 2008.     

Recent advances in linear and nonlinear Raman spectroscopy II

Following the first review on recent advances in linear and nonlinear Raman spectroscopy, the present review summarizes papers mainly published in the Journal of Raman Spectroscopy during 2007. This serves to give a fast overview of recent advances in this research field as well as to provide readers of this journal a quick introduction to the various subfields of Raman spectroscopy. It also reflects the current research interests of the Raman community. Similar reviews of highly active areas of Raman spectroscopy will appear in future issues of this journal. Copyright © 2008 John Wiley & Sons, Ltd.     

Recent Advances in linear and nonlinear Raman spectroscopy I

Raman spectroscopy has advanced considerably in the last several years due to rapid developments in instrumentation and the availability of theoretical methods for accurate calculation of Raman spectra, thus enormously facilitating the interpretation of Raman data. This review is restricted to cover papers mainly published in the Journal of Raman Spectroscopy, which serve to give a fast overview of recent advances in this research field as well as to provide readers of this journal a quick introduction to the various subfields of Raman spectroscopy. It also reflects the current research interests of the Raman community. Similar reviews of highly active areas of Raman spectroscopy will appear in future issues of this journal. Copyright © 2007 John Wiley & Sons, Ltd.     

Non‐invasive depth profiling by space and time‐resolved Raman spectroscopy

Time‐resolved Raman spectroscopy, spatially offset Raman spectroscopy and time‐resolved spatially offset Raman spectroscopy (TR‐SORS) have proven their capability for the non‐invasive profiling of deep layers of a sample. Recent studies have indicated that TR‐SORS exhibits an enhanced selectivity toward the deep layers of a sample. However, the enhanced depth profiling efficiency of TR‐SORS, in comparison with time‐resolved Raman spectroscopy and spatially offset Raman spectroscopy, is yet to be assessed and explained in accordance to the synergistic effects of spatial and temporal resolutions. This study provides a critical investigation of the depth profiling efficiency of the three deep Raman techniques. The study compares the efficiency of the various deep Raman spectroscopy techniques for the stand‐off detection of explosive precursors hidden in highly fluorescing packaging. The study explains for the first time the synergistic effects of spatial and temporal resolutions in the deep Raman techniques and their impact on the acquired spectral data. Copyright © 2013 John Wiley & Sons, Ltd.     

Raman and FTIR spectroscopy applied to the conservation report of paleontological collections: identification of Raman and FTIR signatures of several iron sulfate species such as ferrinatrite and sideronatrite

Fossil materials that contain iron sulfide are well known for their instability when exposed to oxygen and humidity. This term however combines a great variety of materials showing different types of damages. Most of them consist of crystal efflorescence appearing on the surface and inside the matrix. In this work, a methodology was determined for the analysis of these damages by the use of Raman and infrared spectroscopy. The infrared and Raman signatures of a large set of iron sulfates were characterized. Specific attention was paid to sideronatrite and ferrinatrite, which are two associated sodium/iron(III) sulfates, and their infrared and Raman bands were partially assigned. Analysis performed on a selection of 11 damaged fossils showed a great variety of degradation products: besides one case that appeared to be a synthetic resin close to polyvinylchloride acetate, which was applied with a brush on the fossil surface, all degradation products belong to the sulfate group. However, many iron‐free sulfates, such as gypsum, halotrichite, epsomite, or pentahydrite were found, often in association with iron sulfates. In one case, despite the presence of iron in the matrix, no iron sulfate could be detected. This shows that the term ‘pyritic fossil’, commonly used by collection managers, is not appropriate as it oversimplifies the reality. A name such as ‘sulfide‐containing fossil’ would be more suitable. Copyright © 2012 John Wiley & Sons, Ltd.     

喇曼感生克尔效应光谱的琼斯矩阵分析

介绍喇曼感生克尔效应光谱(RIKES)的琼斯(Jones)矩阵分析方法.探测光束的传输强度不仅由所经过的每一个光学器件的琼斯矩阵所决定,而且还受到强的泵波在非线性介质样品中感生依赖于强度的二向色性和双折射(克尔效应)对琼斯矩阵的影响.同时计及样品和光学器件由强泵波作用下感生应力和其他外部产生的线双折射对喇曼感生克尔效应光谱观察的不利影响,导出测量系统的功率传输函数的完整表达式和喇曼感生克尔效应光谱的实现观察条件,最后简述以甲笨(C_7H_8)液体为试样的喇曼感生克尔效应光谱实验结果分析.     

Recent advances in linear and nonlinear Raman spectroscopy. Part VII

The aim of this paper is to provide an overview of advances in the field of Raman spectroscopy as reflected in articles published each year in the Journal of Raman Spectroscopy as well as in trends across related journals publishing in this research area. The context for this review is derived from statistical data on article counts obtained from Thomson Reuters ISI Web of Knowledge by year and by subfield of Raman spectroscopy. Additional information is gleaned from presentations featuring Raman spectroscopy presented at the International Conference on Advanced Vibrational Spectroscopy in Kobe Japan in August 2013 and at SCIX 2013 sponsored by the Federation of Analytical Chemistry and Spectroscopy Societies in Milwaukee, Wisconsin, USA, October 2013. Papers published in the Journal of Raman Spectroscopy in 2012 are highlighted in this review and reflect topics and advances at the frontier of Raman spectroscopy, a field that is expanding rapidly as a sensitive photonic probe of matter at the molecular level in an ever widening sphere of novel applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Monitoring deprotonation of gallic acid by Raman spectroscopy

Gallic acid (GA) is involved in many biochemical processes and reactions and is of great importance in environment thanks to its antioxidant and pro‐oxidant properties. We present in this paper a comprehensive study of GA deprotonation by means of Raman spectroscopy. In the Raman spectra, we identified the characteristic bands that were sensitive to the five pH‐dependent GA forms. From these results, we extracted the GA pKa values that are consistent with the reference values. These results permit the monitoring of GA forms for applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Recent advances in linear and nonlinear Raman spectroscopy. Part V

The purpose of the review is to provide a concise overview of recent advances in the broadly defined field of Raman spectroscopy as reflected in part by the many articles published each year in JRS as well as in trends across all related journals publishing in this research area. Context for this review is derived from statistical data on article counts obtained from Thomson Reuters ISI Web of Knowledge by year and by subfield of Raman spectroscopy. Additional information is gleaned from presentations featuring Raman spectroscopy presented at the meetings of the Federation of Analytical Chemistry and Spectroscopy Societies 2011 and the Sixth International Conference on Advanced Vibrational Spectroscopy 2011. Papers published in JRS in 2010, as reviewed here, reflect trends at the cutting edge of Raman spectroscopy, which is expanding rapidly as a sensitive photonic probe of matter at the molecular level with an ever‐widening sphere of novel applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Recent advances in linear and nonlinear Raman spectroscopy. Part VI

The purpose of this review is to provide a concise overview of recent advances in the broadly defined field of Raman spectroscopy as reflected in part by the many articles published each year in Journal of Raman Spectroscopy as well as in trends across all related journals publishing in this research area. Context for this review is derived from statistical data on article counts obtained from Thomson Reuters ISI Web of Knowledge by year and by subfield of Raman spectroscopy. Additional information is gleaned from presentations featuring Raman spectroscopy presented at the XXIII International Conference on Raman Spectroscopy in Bangalore, India, in August 2012 and at Scientific Exchange 2012 sponsored by the Federation of Analytical Chemistry and Spectroscopy Societies in Kansas City, Missouri, USA, October 2012. Papers published in the Journal of Raman Spectroscopy in 2011 are highlighted in this review and reflect trends at the cutting edge of Raman spectroscopy, a field that is expanding rapidly as a sensitive photonic probe of matter at the molecular level with an ever widening sphere of novel applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Raman and surface-enhanced Raman spectroscopy evidence for oxidation-induced decomposition of graphite

It has been proposed that reduction of exfoliated graphite oxide could be a potential method for producing large quantities of graphene. Raman and surface-enhanced Raman spectroscopy are used to show that oxidation of graphite and exfoliated graphite significantly increases the defect structure of both materials. This would likely lead to a heavily defected graphene structure when oxygen is removed. To insure the observed decomposition is not due to the laser light, the effect of laser intensity on the materials was investigated. It was found that at the highest laser intensity (1.4 × 10⁸ W/M²) there was a significant increase in defects. However, lower laser intensity was found which did not produce defects and was used in the studies of the effect of oxidation on the spectra.     

Recent advances in linear and nonlinear Raman spectroscopy. Part IV

The purpose of the review is to provide a concise overview of recent advances in the broadly defined field of Raman spectroscopy as reflected in part by the many articles published each year in the Journal of Raman Spectroscopy (JRS) as well as in trends across all related journals publishing in this research area. Context for the review is provided by considering statistical data on citations for the Thompson Reuters ISI Web of Science by year and by subfield of Raman spectroscopy. Additional statistics of number of papers and posters presented by category at the XXII International Conference on Raman Spectroscopy (ICORS 2010) is also provided. Papers published in JRS in 2009, as reviewed here, reflect trends at the cutting edge of Raman spectroscopy which is expanding rapidly as a sensitive photonic probe of matter at the molecular level with an ever widening sphere of novel applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Wide area Raman spectroscopy

Raman spectroscopy allows nondestructive analysis of materials using laser illumination. However, most Raman spectrometers can only provide good signal levels and sufficient spectral resolution, by focusing the laser to micrometer-sized spots. This equates to enormous laser intensities, which for samples with even very minor optical absorption either means destroying or damaging it by absorbing even a tiny fraction of the laser power, or it means reducing the laser intensity and hence the signal level. Furthermore, Raman signals generated above or below the focal plane are rejected in traditional Raman spectrometers. As signal levels are already extremely low in Raman spectroscopy, several schemes offer an alternative to focusing down to a diffraction-limited spot, to increase the area by up to 6 orders of magnitude, and increase the sampling depth. This review describes and compares these schemes, and estimates the typical illumination areas.