A robust multi‐grid pressure‐based algorithm for multi‐fluid flow at all speeds

This paper reports on the implementation and testing, within a full non‐linear multi‐grid environment, of a new pressure‐based algorithm for the prediction of multi‐fluid flow at all speeds. The algorithm is part of the mass conservation‐based algorithms (MCBA) group in which the pressure correction equation is derived from overall mass conservation. The performance of the new method is assessed by solving a series of two‐dimensional two‐fluid flow test problems varying from turbulent low Mach number to supersonic flows, and from very low to high fluid density ratios. Solutions are generated for several grid sizes using the single grid (SG), the prolongation grid (PG), and the full non‐linear multi‐grid (FMG) methods. The main outcomes of this study are: (i) a clear demonstration of the ability of the FMG method to tackle the added non‐linearity of multi‐fluid flows, which is manifested through the performance jump observed when using the non‐linear multi‐grid approach as compared to the SG and PG methods; (ii) the extension of the FMG method to predict turbulent multi‐fluid flows at all speeds. The convergence history plots and CPU‐times presented indicate that the FMG method is far more efficient than the PG method and accelerates the convergence rate over the SG method, for the problems solved and the grids used, by a factor reaching a value as high as 15. Copyright © 2003 John Wiley & Sons, Ltd.     

Developing implicit pressure‐weighted upwinding scheme to calculate steady and unsteady flows on unstructured grids

The finite‐volume methods normally utilize either simple or complicated mathematical expressions to interpolate the fluxes at the cell faces of their unstructured volumes. Alternatively, we benefit from the advantages of both finite‐volume and finite‐element methods and estimate the advection terms on the cell faces using an inclusive pressure‐weighted upwinding scheme extended on unstructured grids. The present pressure‐based method treats the steady and unsteady flows on a collocated grid arrangement. However, to avoid a non‐physical spurious pressure field pattern, two mass flux per volume expressions are derived at the cell interfaces. The dual advantages of using an unstructured‐based discretization and a pressure‐weighted upwinding scheme result in obtaining high accurate solutions with noticeable progress in the performance of the primitive method extended on the structured grids. The accuracy and performance of the extended formulations are demonstrated by solving different standard and benchmark problems. The results show that there are excellent agreements with both benchmark and analytical solutions as well as experimental data. Copyright © 2007 John Wiley & Sons, Ltd.     

A hybrid pressure–density‐based algorithm for the Euler equations at all Mach number regimes

In the present work, we propose a reformulation of the fluxes and interpolation calculations in the PISO method, a well‐known pressure‐correction solver. This new reformulation introduces the AUSM⁺ ? up flux definition as a replacement for the standard Rhie and Chow method of obtaining fluxes and central interpolation of pressure at the control volume faces. This algorithm tries to compatibilize the good efficiency of a pressure based method for low Mach number applications with the advantages of AUSM⁺ ? up at high Mach number flows. The algorithm is carefully validated using exact solutions. Results for subsonic, transonic and supersonic axisymmetric flows in a nozzle are presented and compared with exact analytical solutions. Further, we also present and discuss subsonic, transonic and supersonic results for the well known bump test‐case. The code is also benchmarked against a very tough test‐case for the supersonic and hypersonic flow over a cylinder. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of pressure‐ and density‐based methods for different flow speeds

In this paper, pressure‐based and density‐based methods are studied at different flow speeds. The methods are intended for steady flows, and the goal is to find as general an approach as possible to cover different Mach number regimes. The solution methods are based on a finite‐volume approach. Various forms of inviscid fluxes are applied and connected with either a pressure‐based or density‐based implicit solution. For this purpose, a new pressure‐correction method is developed that can be applied for incompressible and for compressible flows. Another option is a standard density‐based approximate factorization method. In both cases, a convergence is accelerated with a Full Approximation Scheme (FAS) multigrid approach. Sample problems in the range of Ma = 0…6 are simulated using different approaches, and their efficiency and accuracy are compared. On the basis of the quality of the solutions, recommendations are made. © 2015 The Authors. International Journal for Numerical Methods in Fluids published by John Wiley & Sons Ltd.     

Pressure‐based unified solver for gas‐liquid two‐phase flows where compressible and incompressible flows coexist

We propose a pressure‐based unified solver for gas‐liquid two‐phase flows where compressible and incompressible flows coexist. Unlike the original thermo–Cubic Interpolated Propagation Combined Unified Procedure (CIP‐CUP) method proposed by Himeno et al (Transactions of the Japan Society of Mechanical Engineers, Series B, 2003), we split the advection term of the governing equations into a conservation part and into the rest. The splitting of advection term has two advantages. One is the high degree of freedom in choosing discretization schemes such as central‐difference schemes, upwind schemes, and Total Variation Diminishing (TVD) schemes. The other is the ease of implementation on unstructured grids. The advantages enable the analyses of various flows such as turbulent and supersonic ones in actual complicated boundaries. Therefore, the solver is useful for practical analyses. The solver was validated on the following test cases: subsonic single‐phase flows, incompressible single‐phase turbulent flows, and incompressible gas‐liquid two‐phase flows. With unstructured grids, we obtained the equivalent results as the ones with structured grids. After the validations, subsonic jet impinging on a water pool was calculated and compared with experimental results. It was confirmed that the calculated results were consistent with the experimental ones.     

A pressure‐based method with AUSM‐type fluxes for MHD flows at arbitrary Mach numbers

In this paper, we propose an extension of a PISO method, previously developed to solve the Euler equations, and which is here extended to the ideal magnetohydrodynamic (MHD) equations. By following a pressure‐based approach, we make use of the flexibility given by pressure equation for calculating flows at arbitrary Mach numbers. To handle MHD discontinuities, we have adapted the MHD‐Advection Upstream Splitting Method for our pressure‐based formulation. With the purpose of validation, four sets of test cases are presented and discussed. We start with the circularly polarized Alfvén waves that serves as a smooth flow validation. The second case is the 1‐D Riemann problem that is calculated using both 1‐D and 2‐D formulation of the MHD equations. The third and fourth problems are the Orszag–Tang vortex and the supersonic low‐ β cylinder allowing validation of the method in complex 2‐D MHD shock interaction. Copyright © 2013 John Wiley & Sons, Ltd.     

A hybrid scheme based on finite element/volume methods for two immiscible fluid flows

We have successfully extended our implicit hybrid finite element/volume (FE/FV) solver to flows involving two immiscible fluids. The solver is based on the segregated pressure correction or projection method on staggered unstructured hybrid meshes. An intermediate velocity field is first obtained by solving the momentum equations with the matrix‐free implicit cell‐centered FV method. The pressure Poisson equation is solved by the node‐based Galerkin FE method for an auxiliary variable. The auxiliary variable is used to update the velocity field and the pressure field. The pressure field is carefully updated by taking into account the velocity divergence field. This updating strategy can be rigorously proven to be able to eliminate the unphysical pressure boundary layer and is crucial for the correct temporal convergence rate. Our current staggered‐mesh scheme is distinct from other conventional ones in that we store the velocity components at cell centers and the auxiliary variable at vertices. The fluid interface is captured by solving an advection equation for the volume fraction of one of the fluids. The same matrix‐free FV method, as the one used for momentum equations, is used to solve the advection equation. We will focus on the interface sharpening strategy to minimize the smearing of the interface over time. We have developed and implemented a global mass conservation algorithm that enforces the conservation of the mass for each fluid. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of a hybrid finite volume/element solver for incompressible flows

In this paper, we report our development of an implicit hybrid flow solver for the incompressible Navier–Stokes equations. The methodology is based on the pressure correction or projection method. A fractional step approach is used to obtain an intermediate velocity field by solving the original momentum equations with the matrix‐free implicit cell‐centred finite volume method. The Poisson equation derived from the fractional step approach is solved by the node‐based Galerkin finite element method for an auxiliary variable. The auxiliary variable is closely related to the real pressure and is used to update the velocity field and the pressure field. We store the velocity components at cell centres and the auxiliary variable at cell vertices, making the current solver a staggered‐mesh scheme. Numerical examples demonstrate the performance of the resulting hybrid scheme, such as the correct temporal convergence rates for both velocity and pressure, absence of unphysical pressure boundary layer, good convergence in steady‐state simulations and capability in predicting accurate drag, lift and Strouhal number in the flow around a circular cylinder. Copyright © 2007 John Wiley & Sons, Ltd.     

A multiblock operator‐splitting algorithm for unsteady flows at all speeds in complex geometries

This paper describes a non‐iterative operator‐splitting algorithm for computing all‐speed flows in complex geometries. A pressure‐based algorithm is adopted as the base, in which pressure, instead of density, is a primary variable, thus allowing for a unified formulation for all Mach numbers. The focus is on adapting the method for (a) flows at all speeds, and (b) multiblock, non‐orthogonal, body‐fitted grids for very complex geometries. Key features of the formulation include special treatment of mass fluxes at control volume interfaces to avoid pressure–velocity decoupling for incompressible (low Mach number limit) flows and to provide robust pressure–velocity–density coupling for compressible (high‐speed) flows. The method is shown to be robust for all Mach number regimes for both steady and unsteady flows; it is found to be stable for CFL numbers of order ten, allowing large time steps to be taken for steady flows. Enhancements to the method which allow for stable solutions to be obtained on non‐orthogonal grids are also discussed. The method is found to be very reliable even in complex engineering applications such as unsteady rotor–stator interactions in turbulent, all‐speed turbomachinery flows. Copyright © 2004 John Wiley & Sons, Ltd.     

An hp‐adaptive unstructured finite volume solver for compressible flows

The idea of hp‐adaptation, which has originally been developed for compact schemes (such as finite element methods), suggests an adaptation scheme using a mixture of mesh refinement and order enrichment based on the smoothness of the solution to obtain an accurate solution efficiently. In this paper, we develop an hp‐adaptation framework for unstructured finite volume methods using residual‐based and adjoint‐based error indicators. For the residual‐based error indicator, we use a higher‐order discrete operator to estimate the truncation error, whereas this estimate is weighted by the solution of the discrete adjoint problem for an output of interest to form the adaptation indicator for adjoint‐based adaptations. We perform our adaptation by local subdivision of cells with nonconforming interfaces allowed and local reconstruction of higher‐order polynomials for solution approximations. We present our results for two‐dimensional compressible flow problems including subsonic inviscid, transonic inviscid, and subsonic laminar flow around the NACA 0012 airfoil and also turbulent flow over a flat plate. Our numerical results suggest the efficiency and accuracy advantages of adjoint‐based hp‐adaptations over uniform refinement and also over residual‐based adaptation for flows with and without singularities.     

A pressure correction‐volume of fluid method for simulation of two‐phase flows

A pressure correction method coupled with the volume of fluid (VOF) method is developed to simulate two‐phase flows. A volume fraction function is introduced in the VOF method and is governed by an advection equation. A modified monotone upwind scheme for a conservation law (modified MUSCL) is used to solve the solution of the advection equation. To keep the initial sharpness of an interface, a slope modification scheme is introduced. The continuum surface tension (CST) model is used to calculate the surface tension force. Three schemes, central‐upwind, Parker–Youngs, and mixed schemes, are introduced to compute the interface normal vector and the gradient of the volume fraction function. Moreover, a height function technique is applied to compute the local curvature of the interface. Several basic test problems are performed to check the order of accuracy of the present numerical schemes for computing the interface normal vector and the gradient of the volume fraction function. Three physical problems, two‐dimensional broken dam problem, static drop, and spurious currents, and three‐dimensional rising bubble, are performed to demonstrate the efficiency and accuracy of the pressure correction method. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of a hybrid particle‐mesh method for two‐phase flow simulations

A hybrid particle‐mesh method was developed for efficient and accurate simulations of two‐phase flows. In this method, the main component of the flow is solved using the constrained interpolated profile/multi‐moment finite volumemethod; the two‐phase interface is rendered using the finite volume particle (FVP) method. The effect of surface tension is evaluated using the continuum surface force model. Numerical particles in the FVP method are distributed only on the surface of the liquid in simulating the interface between liquid and gas; these particles are used to determine the density of each mesh grid. An artificial term was also introduced to mitigate particle clustering in the direction of maximum compression and sparse discretization errors in the stretched direction. This enables accurate interface tracking without diminishing numerical efficiency. Two benchmark simulations are used to demonstrate the validity of the method developed and its numerical stability. Copyright © 2016 John Wiley & Sons, Ltd.     

A compressible single‐temperature conservative two‐phase model with phase transitions

A model for multidimensional compressible two‐phase flow with pressure and velocity relaxations based on the theory of thermodynamically compatible system is extended to study liquid–gas flows with cavitation. The model assumes for each phase its own pressure and velocity, while a common temperature is considered. The governing equations form a hyperbolic system in conservative form and are derived through the theory of a thermodynamically compatible system. The phase pressure‐equalizing process and the interfacial friction are taken into account in the balance laws for the volume fractions of one phase and for the relative velocity by adding two relaxation source terms, while the phase transition is introduced into the model considering in the balance equation for the mass of one phase the relaxation of the Gibbs free energies of the two phases. A modification of the central finite‐volume Kurganov–Noelle–Petrova method is adopted in this work to solve the homogeneous hyperbolic part, while the relaxation source terms are treated implicitly. In order to investigate the effect of the mass transfer in the solution, a 1D cavitation tube problem is presented. In addition, two 2D numerical simulations regarding cavitation problem are also studied: a cavitating Richtmyer–Meshkov instability and a laser‐induced cavitation problem. Copyright © 2014 John Wiley & Sons, Ltd.     

Different modelings of cell‐face velocities and their effects on the pressure–velocity coupling,accuracy and convergence of solution

In this article, a detailed study on the effects of different modelings of cell‐face velocities on pressure–velocity coupling, accuracy and convergence rate of the solution has been conducted. Discussions are focused on the collocated scheme of Schneider and Karimian (Computational Mechanics 1994; 14 : 1–16) in the context of a control‐volume finite‐element Method. In this scheme, variables at the control volume surface are evaluated based on the physics of their governing equations, and the fully coupled system obtained is solved using a direct sparse solver. A special test problem has been defined to check the pressure–velocity coupling for all of the formulations. Other test cases, including Taylor problem, inviscid converging–diverging nozzle and the lid‐driven cavity, have been conducted for different Reynolds numbers, mesh sizes and time steps to investigate the accuracy and the performance of the formulations. Finally, a reliable and efficient scheme for the evaluation of cell‐face velocities is proposed, which can be easily extended to three dimensions. Copyright © 2010 John Wiley & Sons, Ltd.     

Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

A coupling strategy based on anisotropic mesh adaptation for solving two‐fluid flows

We propose a coupling strategy for solving efficiently bifluid flows based on the Stokes equations. Our approach relies on a level set formulation of the interface‐capturing problem, and involves a finite element discretization for the fluid resolution, the method of characteristics for solving the advection of the interface and the anisotropic mesh adaptation of the computational domain in the vicinity of the interface for better accuracy. Copyright © 2010 John Wiley & Sons, Ltd.     

A hybrid vortex method for the simulation of three‐dimensional flows

This paper presents an integral vorticity method for solving three‐dimensional Navier–Stokes equations. A finite volume scheme is implemented to solve the vorticity transport equation, which is discretized on a structured hexahedral mesh. A vortex sheet algorithm is used to enforce the no‐slip boundary condition through a vorticity flux at the boundary. The Biot–Savart integral is evaluated to compute the velocity field, in conjunction with a fast algorithm based on multipole expansion. This method is applied to the simulation of uniform flow past a sphere. Copyright © 2007 John Wiley & Sons, Ltd.     

A solution adaptive simulation of compressible multi‐fluid flows with general equation of state

The unstructured quadrilateral mesh‐based solution adaptive method is proposed in this article for simulation of compressible multi‐fluid flows with a general form of equation of state (EOS). The five equation model (J. Comput. Phys. 2002; 118 :577–616) is employed to describe the compressible multi‐fluid flows. To preserve the oscillation‐free property of velocity and pressure across the interface, the non‐conservative transport equation is discretized in a compatible way of the HLLC scheme for the conservative Euler equations on the unstructured quadrilateral cell‐based adaptive mesh. Five numerical examples, including an interface translation problem, a shock tube problem with two fluids, a solid impact problem, a two‐dimensional Riemann problem and a bubble explosion under free surface, are used to examine its performance in solving the various compressible multi‐fluid flow problems with either the same types of EOS or different types of EOS. The results are compared with those calculated by the following methods: the method with ROE scheme (J. Comput. Phys. 2002; 118 :577–616), the seven equation model (J. Comput. Phys. 1999; 150 :425–467), Shyue's fluid‐mixture model (J. Comput. Phys. 2001; 171 :678–707) or the method in Liu et al. (Comp. Fluids 2001; 30 :315–337). The comparisons for the test problems show that the proposed method seems to be more accurate than the method in Allaire et al. (J. Comput. Phys. 2002; 118 :577–616) or the seven‐equation model (J. Comput. Phys. 1999; 150 :425–467). They also show that it can adaptively and accurately solve these compressible multi‐fluid problems and preserve the oscillation‐free property of pressure and velocity across the material interface. Copyright © 2010 John Wiley & Sons, Ltd.     

A simple three‐wave approximate Riemann solver for the Saint‐Venant‐Exner equations

Erosion and sediments transport processes have a great impact on industrial structures and on water quality. Despite its limitations, the Saint‐Venant‐Exner system is still (and for sure for some years) widely used in industrial codes to model the bedload sediment transport. In practice, its numerical resolution is mostly handled by a splitting technique that allows a weak coupling between hydraulic and morphodynamic distinct softwares but may suffer from important stability issues. In recent works, many authors proposed alternative methods based on a strong coupling that cure this problem but are not so trivial to implement in an industrial context. In this work, we then pursue 2 objectives. First, we propose a very simple scheme based on an approximate Riemann solver, respecting the strong coupling framework, and we demonstrate its stability and accuracy through a number of numerical test cases. However, second, we reinterpret our scheme as a splitting technique and we extend the purpose to propose what should be the minimal coupling that ensures the stability of the global numerical process in industrial codes, at least, when dealing with collocated finite volume method. The resulting splitting method is, up to our knowledge, the only one for which stability properties are fully demonstrated.     

A flux‐splitting solver for shallow water equations with source terms

This paper introduces a stable flux‐splitting solver for one‐dimensional (1D) shallow water equations. This solver is specifically designed to satisfy a strengthened consistency condition for stationary solutions that ensures the stability and accuracy of the scheme. It applies to channels with variable depth and width, including terms modelling friction at bottom and vertical walls. Some numerical tests by comparison to both analytical solutions and experimental measurements show the good performances of the scheme. Copyright © 2003 John Wiley & Sons, Ltd.