Virtual source for a Hermite-Gauss beam

A virtual source that generates a Hermite-Gauss wave of mode numbers m and n is introduced. An expression is obtained for this Hermite-Gauss wave. From this expression, the paraxial approximation and the first 3 orders of nonparaxial corrections for the corresponding paraxial Hermite-Gauss beam are determined. When both m and n are even, leading to maximum amplitude along the axis, the number of orders of nonvanishing nonparaxial corrections is found to be equal to (m + n)/2.     

Virtual source for the Bessel-Gauss beam

The virtual source for generation of the fundamental scalar Bessel-Gauss wave is identified. An expression is derived for the Bessel-Gauss wave, which, in the appropriate limit, yields the paraxial approximation for the fundamental Bessel-Gauss beam. For the azimuthally symmetric beam, the first-order nonparaxial correction to the on-axis field is also determined. This nonparaxial correction reduces correctly to that of the fundamental Gaussian beam in the appropriate limit.     

Virtual source for rotational symmetric Lorentz-Gaussian beam

The virtual source for generation of rotational symmetric Lorentz-Gaussian (RLG) wave whose propagating dynamics present the rotational symmetry is identified. Closed-form expressions, including integral and differential representations, are derived for this kind of Lorentz-Gaussian (LG) wave, thereby yieldingparaxial approximation of the RLG beam in the appropriate regime. From the spectral representation of this wave, the first three order corrections of nonparaxial approximations are determined for a corresponding paraxial RLG beam. Moreover, the relationship between the RLG beam and the Hermite-Gaussian beam is revealed.     

Description of a radially polarized Laguerre-Gauss beam beyond the paraxial approximation

Fifth-order corrected expressions for the fields of a radially polarized Laguerre-Gauss (R-TEM(n1)) laser beams are derived based on perturbative Lax series expansion. When the order of Laguerre polynomial is equal to zero, the corresponding beam reduces to the lowest-order radially polarized beam (R-TEM(01)). Simulation results show that the accuracy of the fifth-order correction for R-TEM(n1) depends not only on the diffraction angle of the beam as R-TEM(01) does, but also on the order of the beam.     

Virtual sources for a cosh-Gaussian beam

On the basis of superposition of beams, a group of virtual sources that generate a cosh-Gaussian wave is identified. A closed-form expression is derived for this cosh-Gaussian wave, which, in the appropriate limit, yields the paraxial approximation for the cosh-Gaussian beam. From this expression, the paraxial approximation and the nonparaxial corrections of all orders for the corresponding paraxial cosh-Gaussian beam are determined.     

双脉冲电子束源实验研究

 利用现有2MeV直线感应注入器，通过改造，将其次级功率源和8个感应腔分成2组，使之交替工作，建立了一台双脉冲电子束源。二极管电压脉冲幅度达到1MeV，电子束脉冲持续时间为120ns，脉冲间隔可以根据需要在100~500ns间进行调节。实验结果表明：该双脉冲电子束源可以产生双脉冲电子束，其电压幅度差值小于2%，束流可达3kA，并且工作稳定，利用该装置可以进行多脉冲二极管物理和天鹅绒多脉冲发射特性实验研究。     

Low-energy electron beam source

Experimental results of research into a ferroelectric-plasma-source-assisted hollow anode (HA) discharge as a source of low-energy electron beams are presented. To generate electron beams, the HA auto-bias negative voltage was achieved by the discharge current flowing through the resistor connecting the HA and the grounded electrode. It is shown that this method allows reliable and reproducible generation of low-energy electron beams with electron energy of several hundreds of eV, electron current density up to several A/cm² and pulse duration of several tens of microseconds.     

双脉冲电子束源实验研究

利用现有2MeV直线感应注入器,通过改造,将其次级功率源和8个感应腔分成2组,使之交替工作,建立了一台双脉冲电子束源。二极管电压脉冲幅度达到1MeV,电子束脉冲持续时间为120ns,脉冲间隔可以根据需要在100~500ns间进行调节。实验结果表明：该双脉冲电子束源可以产生双脉冲电子束,其电压幅度差值小于2%,束流可达3kA,并且工作稳定,利用该装置可以进行多脉冲二极管物理和天鹅绒多脉冲发射特性实验研究。     

拉盖尔-高斯截断级数展开法的应用

 用拉盖尔-高斯截断级数模拟了任意半径的圆孔硬边光阑窗口函数,并应用于研究高斯光束和零阶贝塞尔-高斯光束通过硬边光阑的衍射。对高斯光束和零阶贝塞尔-高斯光束的轴向和横向光强分布的计算结果表明：当积分面不是很靠近光阑时,用参数最佳化选取的拉盖尔-高斯截断级数法与用直接数值积分所得结果符合很好。     

A reflex electron beam discharge as a plasma source for electronbeam generation

A reflex electron beam glow discharge has been used as a plasma source for the generation of broad-area electron beams. An electron current of 120 A (12 A/cm²) was extracted from the plasma in 10 μs pulses and accelerated to energies greater than 1 keV in the gap between two grids. The scaling of the scheme for the generation of multikiloamp high-energy electron beams is discussed     

Phobis,a photon beam ion source for production of highly-charged ions

An ion source based on successive photoionization of trapped ions is now possible using high-brightness X rays from a modern synchrotron storage ring. Calculations based on the design parameters for the National Synchrotron Light Source at Brookhaven indicate that degrees of ionization and beam intensities should be comparable to those achieved with existing EBIS, ECRIS, or recoil-ion sources.     

Controlling helicity-correlated beam asymmetries in a polarized electron source

The control of helicity-correlated changes in the electron beam is a critical issue for the next generation of parity-violating electron scattering measurements. The underlying causes and methods for controlling these changes are reviewed with reference to recent operational experience at Jefferson Lab.     

Design of a new pseudospark-produced high-brightness electron beam source

Ｄｅｓｉｇｎｏｆａｎｅｗｐｓｅｕｄｏｓｐａｒｋ－ｐｒｏｄｕｃｅｄｈｉｇｈ－ｂｒｉｇｈｔｎｅｓｓｅｌｅｃｔｒｏｎｂｅａｍｓｏｕｒｃｅＺＨＵＪｕｎｂｉａｏ；ＷＡＮＧＭｉｎｇｃｈａｎｇ；ＷＡＮＧＺｈｉｊｉａｎｇ（ＳｈａｎｇｈａｉｉｎｓｔｉｔｕｔｅｏｆＯｐｔ...     

High-purity F atom beam source

Fluorine atoms are generated by 2.45 GHz microwave dissociation of 99.99% F₂ in a synthetic sapphire single-crystal discharge tube. Typical F₂ gas flow and beam intensity are: 0.1 mbar ls^?1 and 9.5×10¹⁷ atoms sterad^?1 s^?1. The measured degree of dissociation into atoms isD>98%. The high total F atom flux together with the purity of the beam seem to make the source a very promising device for both reaction kinetic-and molecular beam-experiments     

带状束高功率微波源宽通带收集极

设计了一种适用于带状电子束高功率微波源的宽通带收集极,在有效吸收束-波相互作用后的带状电子束的同时,保证了带状电子束高功率微波源的工作模式矩形波导TM11模式高效率地通过。研究结果表明：在13~27 GHz范围内,功率传输效率大于95%,这一宽通带特性使得该类型的收集极与带状电子束高功率微波源能够更好配合,显著提高了微波源的模拟优化和实验调试效率;TM11模式微波的传输效率对收集极厚度和长度等参数不敏感;该类型收集极结构具有良好的散热能力,在不加外部水冷装置的条件下,仅靠空气自然对流冷却和辐射冷却,可以承受电流3 kA、电压300 kV、脉冲宽度30 ns及重复频率50 Hz带状电子束的连续冲击。     

拉盖尔-高斯截断级数展开法的应用

用拉盖尔-高斯截断级数模拟了任意半径的圆孔硬边光阑窗口函数,并应用于研究高斯光束和零阶贝塞尔-高斯光束通过硬边光阑的衍射。对高斯光束和零阶贝塞尔-高斯光束的轴向和横向光强分布的计算结果表明：当积分面不是很靠近光阑时,用参数最佳化选取的拉盖尔-高斯截断级数法与用直接数值积分所得结果符合很好。     

Virtual Compton scattering at low energies with a positron beam

The European Physical Journal A - Using a transport model that includes a first-order chiral phase transition between the partonic and the hadronic matter, we study the development of density...     

Superlight source of radiation with a waveguide used for bunching an electron beam

A scheme of a generator of electromagnetic-wave radiation is proposed in which a radiating region moves along a radiator with a velocity greater than the velocity of light in vacuum. The superlight motion of the generating region leads to the situation in which the resulting radiation has the properties of Vavilov-Cherenkov radiation. The electron beam of a superlight source is formed while the particles travel across a waveguide along which an electromagnetic wave propagates. The construction of the generator makes it possible to vary the velocity of the radiating region, the radiation pattern, and the radiation beamwidth. Calculations are performed that allow one to evaluate the parameters of the generator and the characteristics of radiation.     

Minimizing radial emittance of a beam from a synchrotron radiation source

The feasibility of minimizing the radial emittance of a beam from a synchrotron radiation source (storage ring) is studied. It is shown that the emittance can be diminished by producing nonuniform fields in the magnetic storage ring.