醇溶性聚丙烯酸酯乳液的合成及性能研究

以丙烯酸乙酯(EA)、甲基丙烯酸甲酯(MMA)和甲基丙烯酸(MAA)为主单体,采用过硫酸盐作引发剂,经预乳化乳液聚合工艺合成了聚丙烯酸酯乳液.讨论了乳化剂种类、单体种类以及功能性单体、引发剂加入工艺对乳液聚合过程及乳液产品性能的影响.结果表明:单体组成为m(MMA)∶m(EA)∶m(MAA)=45∶40∶15所得乳液聚合物能满足使用性能要求;种子引发剂加入质量控制在单体总质量的0.3%,而总的引发剂用量占单体总质量的0.8%较适宜.用差热分析仪和凝胶渗透色谱仪对乳液聚合物进行了表征.     

苯甲酸分子印迹聚合物的制备及其吸附性能

以苯甲酸为模板分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备了高选择性识别的分子印迹聚合物。利用合成的聚合物作为吸附剂填充制备气体浓缩针装置,并用于挥发性有机化合物(VOCs)的气相色谱分析。实验结果表明:60℃下恒温聚合反应6h,模板分子、功能单体、交联剂的物质量比为1∶4∶20,预聚合时间为3h,溶剂为乙腈,模板分子为苯甲酸时,合成的分子印迹聚合物对苯系物的吸附量最大。     

网状聚合物冠醚的合成与性能—Ⅰ.以双环氧丙基醚、乙二醇双环氧丙基醚及多缩乙二醇双环氧丙基醚为原料合成

本文报道了一类新型网状聚合物冠醚的合成方法及其性能。分别通过双环氧丙基醚、乙二醇双环氧丙基醚及多缩乙二醇双环氧丙基醚等五种双环氧单体的网化聚合,直接合成了八种网状聚合物冠醚。聚合反应中分别采用了两种催化体系:BF₃·OEt₂和(i-Bu)₃Al。测定了网状聚合物冠醚对金属阳离子的络合容量及其在亲核取代反应中的相转移催化活性。实验表明,这类网状聚合物冠醚合成简便、性能良好且便于重复使用。     

聚芳醚酮类高聚物的合成与热性能研究

利用合成的新型单体,采用亲核取代法制备了5类聚芳醚酮.用DSC和WAXD对聚合物的研究表明:新型聚芳醚酮与聚醚醚酮的结晶结构相同,其熔点及玻璃化转变温度均随聚合物结构单元中酮基含量的增加而升高.     

荧光聚合物研究进展

本文总结了近年来荧光聚合物的研究进展,主要介绍了荧光聚合物的分类：按其溶解性能可分为非水溶性、水溶性和两亲荧光聚合物三大类;荧光聚合物的合成：荧光化合物为引发剂、荧光化合物为链转移剂、荧光功能单体聚合、荧光化合物与聚合物的化学键合、非荧光功能单体聚合等五种制备荧光聚合物的设计合成方法;荧光聚合物的应用：荧光聚合物在荧光化学传感器、荧光分子温度计、荧光造影、药物载体、荧光探针等方面的应用研究。     

高固含量丙烯酸酯的微乳液聚合

采用半连续滴加预乳液的微乳液聚合法,合成出聚合物质量分数40%、乳化剂质量分数2.5%的丙烯酸酯微乳液. 考察了单体滴加速度、乳化剂种类及其用量、电解质用量、温度和搅拌等因素对乳液粒径及性能的影响. 研究表明,聚合在相当于Winsor-Ⅰ型的聚合体系中进行,由纯单体相(滴入的单体)和O/W微乳相构成,上层单体只起储存库的作用,它在缓慢的搅拌帮助下扩散进入微乳相中,只要微乳液液面上补加的单体不扰动微乳液的平衡,即不会产生粗粒子. 单体滴加时间控制在4 h,选择质量分数为2.5%的Dowfax2A1/OP-10乳化体系,NaHCO3质量分数为0.16%,反应温度控制在75～80 ℃,搅拌速度控制在150 r/min,可使聚合反应平稳进行,得到了m(聚合物)∶m(乳化剂)=15∶1的丙烯酸酯微乳液.     

孔雀石绿分子印迹聚合物的制备及其吸附

采用本体聚合法制备了孔雀石绿分子印迹聚合物,对功能单体的种类及用量、交联剂用量、模板浓度和聚合时间等参数进行了优化,并通过等温吸附实验,考察聚合物的吸附性能。 结果表明,以α-甲基丙烯酸为功能单体,当孔雀石绿、α-甲基丙烯酸和乙二醇二甲基丙烯酸酯的摩尔比为1∶4∶20时,所合成的聚合物具有最大的吸附容量,印迹因子（α=QMIP/QNIP）可达到3.6,表明合成的印迹聚合物对孔雀石绿有良好的识别和富集能力。     

聚合物Langmuir—Blodgett膜研究进展

聚合物LB膜可用两种方法制备,一种是两亲单体成膜再进行聚合反应,另一种为直接从两亲聚合物在亚相表面铺展成膜并转移。本文综合聚合物LB膜的研究状况,包括两亲聚合物和非两亲聚合物,对聚合物LB膜的成膜特点,结构和性能作了描述,并简要介绍了聚合物LB膜的应用前景。     

新型含环己烯结构的甲基二氮杂萘联苯型聚醚酮的合成及表征

合成了一种新型聚合单体 1 甲基 4,5 二 (4 氯代苯甲酰基 )环己烯 ,并与 4 (3 ,5 二甲基 4 羟基苯基 ) 2 ,3 二氮杂萘 1 酮单体经亲核取代反应 ,成功地合成了含环己烯结构的杂环联苯型聚醚酮聚合物 .用FT IR、1H NMR、DSC、X 射线衍射等方法对聚合物进行了表征 ,并研究了聚合物的溶解性能 .结果表明 ,聚合物是一种具有较高的玻璃化温度的可溶性无规共聚物 .聚合物含有不饱和双键结构 ,是一种反应性高分子     

对氯甲基苯乙烯的聚合及其聚合物性质的研究

<正> 对氯甲基苯乙烯(p-CMS)是一种有工业应用的单体,通过其苄氯基团上的亲核取代反应,可以合成各种功能性单体及功能高分子。虽然其聚合物——聚对氯甲基苯乙烯(P-p-CMS)——可从聚苯乙烯的直接氯甲基化来合成,但通过p-CMS的聚合及共聚可以更准确地控制聚合物的结构和扩大它们在高分子改性中的应用范围.70年代以来,对p-CMS的合成和应用日渐报道,但有关其聚合、单体与聚合物的结构及基本理化性质研     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。