含偶氮苯的咔唑类双功能光折变聚合物的合成及表征

通过后重氮偶合方法制备了一系列不同生色团含量的咔唑类双功能光折变聚合物，并用IR、^1H-NMR、UV-vis、DSC以及GPC等对聚合物进行了分析和表征。IR和UV-vis谱图显示偶氮苯基团已接到咔唑环上。UV-vis结果表明：反应时间对该反应的影响非常大，当反应时间从6h增加到60h时，聚合物中生色团的含量从13.5%升高到66.7%。GPC结果显示后重氮偶合法比常规方法得到的该类聚合物的分子量明显提高。DSC结果显示聚合物的玻璃化转变温度随偶氮苯含量的增加而升高。     

偶氮苯取代乙炔功能化合物的合成与表征

采用偶氮偶联和金属钯催化偶联反应法,合成了一系列非线性光学基团直接取代乙炔化合物,其结构经^1HNMR,IR,DSC及元素分析等表征。     

新型咔唑取代乙炔化合物的合成

分别以咔唑和2-羟基咔唑为原料,通过Sonagashira偶联反应和N-烷基化反应合成了6个新型的咔唑取代乙炔化合物:2-乙炔基-9-苄基咔唑,2-乙炔基-9-正丁基咔唑,2-乙炔基-9-正己基咔唑,3-乙炔基-9-苄基咔唑,3-乙炔基-9-正丁基咔唑和3-乙炔基-9-{4·[4·(硝基)苯基偶氮苯]氧}亚丁基咔唑,其...     

后重氮偶合法制备含硝基偶氮苯咔唑类聚合物

后重氮偶合;咔唑;生色团;后重氮偶合法制备含硝基偶氮苯咔唑类聚合物     

间乙炔基苯偶氮线性酚醛泡沫的结构与性能研究

采用高温化学发泡法制备了一种间乙炔基苯偶氮酚醛树脂泡沫(EPANF).采用傅里叶红外光谱(FTIR)、凝胶渗透色谱(GPC)、光学显微镜、扫描电子显微镜(SEM)、导热系数分析仪、临界氧指数分析仪和热重分析(TG)等表征了间乙炔基苯偶氮酚醛树脂(EPAN)结构和EPANF的泡孔结构、压缩强度、隔热性能、阻燃性能和热性能.研究结果表明,当所用发泡剂含量为18%,泡沫体的表观密度为0.179 g/cm~3时,EPANF泡孔均匀微细,闭孔率高,泡孔平均粒径为350μm左右.随着表观密度增加,泡沫体压缩强度增大,热导率系数增大,隔热性能略有下降,但其临界氧指数变大,阻燃性能提高.当表观密度为0.363 g/cm~3时,EPANF的压缩强度达到最大为5.63 MPa.EPANF的5%和10%热失重温度分别为333、381℃,其700℃的残炭率和1000℃的残炭率分别为65.8%和58.2%,耐热性和耐烧蚀性较普通线性酚醛树脂有明显提高.EPANF作为热结构材料和烧蚀材料有望在航天航空等领域应用.     

含咔唑衍生物的聚硅氧烷发光材料的合成及其性能

设计并合成了含咔唑衍生物的聚硅氧烷发光材料。通过核磁共振、元素分析、紫外-可见吸收光谱、荧光光谱、热失重分析、循环伏安法对其结构和性能进行了表征。结果表明:该化合物具有良好的荧光性能和热稳定性,其发射波长为408 nm,分解温度在242℃,最高占据分子轨道能级和分子最低空轨道能级分别为4.70 eV和1.16 eV。     

偶氮苯衍生物Langmuir-Blodgett膜的结构与红外热释电性能

利用Langmuir-Blodgett(LB)方法,在镀有金属膜的盖玻片和CaF_2衬底上转移了双嗜性偶氮苯衍生物多层LB膜.用线性红外二向色性光谱方法研究了分子的各跃迁矩的取向和分子长轴的取向.利用X射线衍射方法研究了LB膜的有序周期结构,讨论了双周期结构与高热释电活性的关系.     

咔唑及其衍生物合成方法研究进展

咔唑及其衍生物是一类重要的含氮芳杂环化合物,具有许多独特的理化性质及生物活性,分析、归纳、总结了近5年来发表的文献,选取具有代表性的实例,并按照中间体的不同将合成方法分为四类,分别讨论了咔唑及其衍生物合成方法的进展情况,对咔唑及其衍生物成环的新方法给予重点关注.     

含甲氧基偶氮苯基元的苯甲酸衍生物的合成与液晶性研究

合成和表征了新型的含有甲氧基偶氮苯液晶基元的3,4,5-三取代苯甲酸衍生物Dn, 研究了结构对其相行为的影响. 结果表明, 在Dn中, 羰基(C=O)和羟基(OH)之间的氢键相互作用存在于结晶态、液晶态和各向同性状态, 在各向同性态时氢键较弱. 通过对其分子结构的调控, 有效地抑制了微相分离和强的分子间的相互作用, 得到了具有单向向列型液晶行为的3,4,5-三取代的苯甲酸衍生物.     

一种含有咔唑功能基团的有机聚磷腈的合成与表征

采用传统的亲核取代反应的方法合成了一种新有含有咔唑侧基的有机磷腈高分子，并用红外、＾１Ｈ核磁、紫外、热失重、差热分析了其结构，它的玻璃化转变温度为９１．６℃，大大低于聚乙烯咔唑的玻璃化转变温度。     

Synthesis and Crystal Structure of a Novel Chiral 1-Methylpropargyl Ester Carrying Azobenzene Moiety

A novel chiral methylpropargyl ester containing azobenzene moiety(S)-(-)-3-methyl-3-{4-[4-(n-octyloxy)phenylazophenyl]carbonyl}oxy-1-propyne 3(C25H30N2O3,Mr = 406.51) was synthesized and characterized by IR,NMR and single-crystal X-ray diffraction.The crystal is of monoclinic system,space group P21 with a=6.7610(17),b=7.675(2),c=22.749(7),β=97.613(6)°,V=1170.1(6)3,Z=2,Dc=1.154,F(000)=436,μ=0.076 mm-1,R=0.0544 and wR=0.1569 for 2444 observed reflections with Ⅰ2σ(Ⅰ).Structure analysis proved that the azobenzene presents a trans form,and intermolecular hydrogen bonds yield a 3D framework.The chiral acetylene carrying azobenzene moieties can be a potential alternative nonlinear optical,helical polymer,and liquid crystalline material.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Luminescence properties of epoxy resins modified with a carbazole derivative

Luminescence properties of a new material - epoxy resin with added 9-(2,3-epoxypropyl)carbazole (REPK) were studied. Absorption and photoluminescence (PL) spectra of REPK are compared with those of poly(N-vinylcarbazole) (PVK). PL in REPK is shifted to shorter wavelengths. Its intensity is higher than in PVK. REPK emits light in the range from 330 nm to 470 nm. PL spectrum of REPK could be well deconvoluted for four emission bands.     

Synthesis and characterization of a novel carbazole cyclic oligomer and main-chain polymer

The efficient synthesis of a novel cyclic carbazole tetramer and carbazole main-chain polymer via the Knoevenagel condensation has been developed. The carbazole cyclic tetramer could be obtained in a high yield by a one-stage Knoevenagel condensation of 3,6-diformyl-9-heptylcarbazole and 3,6-bis(cyanoacetoxymethyl)-9-heptylcarbazole in tetrahydrofuran (THF) without the use of the high-dilution principle. The corresponding carbazole main-chain polymer could also be obtained as a main product by a two-stage Knoevenagel polycondensation. Detailed structural characterization of this novel oligomer by spectroscopy and elemental analysis confirmed the cyclic structure. The corresponding main-chain polymer with large molecular weight was found to be amorphous by differential scanning calorimetry. Studies on the nonlinear optical and photorefractive properties of these materials are in progress. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2041–2047, 1997     

Synthesis and characterization of conjugated polymers containing a carbazole moiety

Two series of conjugated polymers with a carbazole moiety were synthesized by Knovenagel and Wittig condensations. The chemical structure, thermogravimetric, photophysical and electrochemical properties of the polymers were characterized by ¹H‐NMR, IR, GPC, TG, UV‐vis, FL, and CV. The results indicated that PBM is the most thermally stable one and PBP is the most thermally instable one. The absorption and emission properties of the polymers were adjusted by the modification of chemical structures. The quenching effect of cyano group and oxygen atom results in the lower fluorescence quantum efficiency. The fitted emission spectra suggested that the emission spectra of all the polymers come from different vibronic transitions and aggregation emission. Copyright © 2008 John Wiley & Sons, Ltd.     

基于咔唑衍生物的荧光化学传感器的合成及其对金属离子的选择性识别性能

以咔唑为原料合成了2个荧光化学传感器,所得化合物的组成和结构经元素分析以及质谱、红外光谱、核磁共振氢谱验证.通过在25℃下进行荧光光谱滴定,研究了传感器在体积比为1∶1的二甲基亚砜/水缓冲溶液[三羟甲基氨基甲烷盐酸盐(Tris-HCl),pH=7.4]中对Cu2+和Fe3+的选择性识别作用.结果表明,所合成的传感器与Cu2+和Fe3+形成1∶1的配合物并导致荧光猝灭,并对Cu2+离子和Fe3+离子具有较高的选择性识别和荧光传感性能.     

含偶氮苯基团的三枝状凝胶因子的合成和凝胶性质研究

设计合成了一种中心为三乙基氨基,酰胺基作为氢键连接基团,柔性的烷基链连接偶氮苯基团的含多种分子间弱相互作用的三枝状有机凝胶因子1.由于偶氮苯基团处于分子的外缘,在THF溶液中,凝胶因子1表现出良好的光致变色行为.凝胶性能测试中,分子间存在氢键作用、π-π相互作用等使得该化合物在醇类、有机酸类和乙腈等极性溶剂中极易形成稳定的有机凝胶.在少数的非极性溶剂,如正己烷和环己烷中也可以形成稳定凝胶,并且随着溶剂极性的不同,凝胶形貌呈现出规则的纤维状或带状结构.