Modeling of Equilibrium Adsorption and Surface Tension of Cationic Gemini Surfactants

A series of equilibrium tension models are used to evaluate the adsorption behavior of a novel class of lipoaminoacid gemini cationic surfactants, N^α,N^ω-bis(long-chain N^α-acylarginine)α,ω-dialkylamides or bis(Args). For purposes of comparison, the monomer LAM (the methyl ester of N^α-lauroyl arginine) was also examined. These surfactants are of particular interest for both their low toxicity and biocompatibility. The tension models are based on the Gibbs adsorption isotherm and classified as “ionic” when the surface charge and the electric double layer are accounted for or as “pseudo-nonionic” when the surface charge is ignored. Both model predictions and fitted parameter values are evaluated with respect to physical plausibility and overall goodness of fit to the available tension and density data. In particular, the inferred values for the standard Gibbs free energy of adsorption ΔG°, determined from an equilibrium constant defined on a nondimensional basis, without including artifacts due to an electrostatic contribution, are analyzed. The most reliable values of ΔG° are found with the combined model to range from −110 to −120 kJ mol⁻¹ for the three dimers examined and −80 kJ mol⁻¹ for the monomer. For spacer chain lengths n=3, 6, or 9, the maximum surface area of surfactant adsorption and the maximum free energy of adsorption are observed for the surfactant with the spacer chain length of 6.     

SYNTHESIS, CHARACTERIZATION AND CATALYTIC ACTIVITY OF N,N'-BIS(3-ALLYL SALICYLIDENE)ETHYLENEDIAMINE COBALT SCHIFF BASE COMPLEX ANCHORED ON A NEW POLYMER SUPPORT

 A new chelating polymer support has been prepared by suspension copolymerization of synthesized N,N'-bis(3-allyl salicylidene)ethylenediamine monomer Schiff base (N,N'-BSEDA) with styrene (St) and divinylbenzene (DVB) using azobisisobutyronitrile (AIBN) as initiator in the presence of poly(vinyl alcohol). The content and complexation ability of monomer Schiff base (N,N'-BSEDA) for cobalt(Ⅱ) ions in prepared crosslinked polymer beads have shown dependence on the amount of DVB used in reaction mixture. The amount of monomer Schiff base (N,N '-BSEDA) in crosslinked beads showed a substantial decreasing trend at high concentration of DVB in the reaction mixture (> 1.5 mol dm^-3), hence the efficiency of complexation (EC%) and cobaltⅡion loading (EL%) of polymer beads showed a decreasing trend. The structure of monomer Schiff base (N,N'-BSEDA) and its cobalt(Ⅱ)complex on polymer support was elucidated by IR, UV and magnetic measurements. The catalytic activity of polymer bound cobalt(Ⅱ)Schiff base complex was evaluated by analyzing kinetic data of decomposition of hydrogen peroxide in the presence of either supported cobalt(Ⅱ)complex or free cobalt(Ⅱ)complex. The activation energy for the decomposition of hydrogen peroxide by polymer supported cobalt complex was found to be low (33.37 kJ mol^-1) in comparison with unsupported cobalt(Ⅱ)complex (56.35 kJ mol^-1). On the basis of experimental observations, reaction steps are proposed and a suitable rate expression derived.     

Energy of Formation of an Acyclic <Emphasis Type="Italic">N</Emphasis>-Methyltrifluoromethanesulfonamide Dimer

The energy of formation of an open-chain N-methyltrifluoromethanesulfonamide dimer stabilized by the N-H⋯O=S hydrogen bond is 20.1 kJ mol⁻¹ (CH₂Cl₂). This value exceeds by ∼12 kJ mol⁻¹ the energy of formation of cyclic secondary methanesulfonamide self-associates per hydrogen bond.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 2, 2005, pp. 295–298.Original Russian Text Copyright © 2005 by Chipanina, Sherstyannikova, Sterkhova, Turchaninov, Shainyan.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Adsorption of 2-amino-5-nitropyridine on the (111) and (210) silver faces

The adsorption isotherms of 2-amino-5-nitropyridine (ANP) on the (111) and (210) silver faces from an aqueous solution of 0.09 M KClO₄ + 0.02 M NaOH were determined at −0.4 V vs. the 1 mol⁻¹ calomel electrode using double-potential-step chronocoulometry. The surface concentration Γ_ANP of ANP was obtained by stepping the applied potential from −0.4 V, where ANP is electroinactive, to −1.2 V, where ANP is electroreduced to 2,5-diaminopyridine. The charge involved in this step, once corrected for the diffusive and capacitive contributions, yields 6FΓ_ANP directly. The maximum surface concentration and standard Gibbs energy of adsorption are equal to 3.6 × 10⁻¹⁰ mol cm⁻² and −35 kJ mol⁻¹ on Ag(111) and 5.2 × 10⁻¹⁰ mol cm⁻² and 42 kJ mol⁻¹ on Ag(210), thus demonstrating the strong effect of surface crystallography on the energetics of ANP adsorption.     

Molecular structure and decomposition mechanism of peracetic acid esters AcOOR (R = Me,Bu<Superscript>t</Superscript>)

The molecular structure and conformational mobility of methyl and tert-butyl esters of peracetic acid AcOOR (R = Me (1), Bu^t (2)) were studied by the ab initio MP4(SDQ)//MP2(FC)/6-31G(d,p) method and density functional B3LYP/6-31G(d,p) approach. The B3LYP calculated equilibrium conformations of the molecules are characterized by the C-O-O-C torsion angles of 93.6° (1) and 117.0° (2). Structural features of the molecules under study and a distortion of tetrahedral bond configuration at the C_α atom were explained using the natural bonding orbital approach. The standard enthalpies of formation of AcOOMe (−328.5 kJ mol⁻¹) and AcOOBu^t (−440.4 kJ mol⁻¹) were determined using the G2 and G2(MP2) computational schemes and the isodesmic reaction approach. The transition state of AcOOMe decomposition into AcOOH and formaldehyde was calculated (E _a = 122.8 kJ mol⁻¹). The thermal effects of homolytic decomposition of the peroxy esters following a concerted mechanism (Me^· + CO₂ + ^·OR) and simple homolysis of the peroxide bond (AcO^· + ^·OR) were found to be 97.5±0.3 and 155.1±0.3 kJ mol⁻¹, respectively. At temperatures below 400 K, the most probable decomposition mechanism of peroxy esters 1 and 2 involves simple homolysis of the O-O bond.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2021–2027, October, 2004.     

A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.     

Theoretical Study of Gas-Phase Acidities of Selected Angiotensin-Converting Enzyme Inhibitors

The structure and gas-phase acidities of six members of large angiotensin-converting enzyme (ACE) inhibitor family [cilazaprilat, silanediol, fosinoprilat, AcSDKP, angiotensin_I (terminal part), and RXP_407] have been studied using the ONIOM Becke3LYP/6-311+G(d,p):HF/3-21G^∗ method. The investigated ACE inhibitors are weak acids with calculated acidity of about 1270–1650 kJ mol⁻¹. Of acids studied the highest gas-phase acidity (1273 kJ mol⁻¹) possesses experimental ACE inhibitor RXP_407. This drug, according to the computed pK_a value (3.2), is also in water solution the most acidic compound of the ACE inhibitors investigated.     

Cyclodextrin gels which have a temperature responsiveness

β-Cyclodextrin (CD) gels crosslinked by epichlorohydrin (CD-gel) were modified with poly(N-isopropylacrylamide) (PIPA; M_n 4900) chains. The CD residue in the gel associated with 8-anilino-1-naphthalenesulfonic acid (ANS) more strongly than the free PIPA-carrying CD. The van't Hoff plot for complexation of ANS with the gel drifted largely from linear relationship above the coil-globule transition temperature of individual PIPA chains. Furthermore, a relatively more significant temperature effect on the stereoselective adsorption of phenylalanine to the CD gel was observed by the modification with PIPA chains. These results imply that the ability of the CD-gel–PIPA conjugate to form inclusion complex could be skillfully controlled by temperature. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1535–1541, 1997     

Conductivity of crosslinked poly(N-vinylpyrrolidone) gel film containing surfactant as electrolyte salt

New polymeric solid electrolyte films, consisting of crosslinked poly(N-vinylpyrrolidone) (PVPD) as matrix, and surfactant, sodium deoxycholate (NaDC), lithium deoxycholate (LiDC), sodium laulylsulfate (R₁₂OSO₃Na), or sodium palmitate (R₁₅COONa) as electrolyte salt, are prepared; their basic structure and conductivity dependence on temperature are reported. The structure of the electrolytes is amorphous. Their conductivity is 3.1 × 10^?5 S cm^?1 (containing NaDC), 8.42 × 10^?6 S cm^?1 (LiDC), 2.18 × 10^?4 S cm^?1 (R₁₂OSO₃Na), and 7.27 × 10^?5 S cm^?1 (R₁₅COONa) at 20°C. Their temperature dependence of the conductivity is similar to that of liquid electrolyte rather than that of usual polymeric solid electrolyte, i.e., the WLF-type dependence. The values of activation energy of conductivity (E_a) were PVPD, 25.5 kJ mol^?1; PVPD/NaDC, 21.4 kJ mol^?1; PVPD/LiDC, 25.3 kJ mol^?1; PVPD/R₁₂OSO₃Na, 17.2 kJ mol^?1; PVPD/R₁₅COONa, 18.7 kJ mol^?1. © 1993 John Wiley & Sons, Inc.     

Catalytic activities of polymer‐supported metal complexes in oxidation of phenol and epoxidation of cyclohexene

The metal complexes of N, N′‐bis (o‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complexation of these metal ions on unsupported HPPn Schiff base was 82.3, 84.5, and 83.9 wt%. The iron(III) complexes of HPPn Schiff base were octahedral in geometry, whereas copper(II) and zinc(II) ions complexes were square planar and tetrahedral. Complexation of metal ions increased the thermal stability of HPPn Schiff base. Catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in the presence of hydrogen peroxide. The polymer‐supported HPPn Schiff base complexes of iron(III) ions showed 73.0 wt% conversion of phenol and 90.6 wt% conversion of cyclohexene at a molar ratio of 1:1:1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 63.8 wt% conversion for phenol and 83.2 wt% conversion for cyclohexene. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 93.1 and 98.3 wt%, respectively with supported HPPn Schiff base complexes of iron(III) ions but was lower with HPPn Schiff base complexes of copper(II) and zinc(II) ions. Activation energy for the epoxidation of cyclohexene and phenol conversion with unsupported HPPn Schiff base complexes of iron(III) ions was 16.6 kJ mol^?1 and 21.2 kJ mol^?1, respectively, but was lower with supported complexes of iron(III) ions. Copyright © 2007 John Wiley & Sons, Ltd.     

β‐Cyclodextrin polymer brushes based on hyperbranched polycarbosilane: Synthesis and characterization

In this article, our main goal is to combine hyperbranched polymer with β‐cyclodextrin (β‐CD) to establish a novel functional polymer species with core‐shell structure and supramolecular system for further application in inclusion technologies and the complex drugs delivery system. Therefore, two β‐CD polymer brushes based on hyperbranched polycarbosilane (HBP) as a hydrophobic core and poly(N,N‐dimethylaminoethyl methacrylate) (PDMA) carrying β‐CD units as a hydrophilic shell were synthesized. Hyperbranched polycarbosilane macroinitiator carrying ? Cl groups (HBP‐Cl) was also prepared by using 1,1,3,3‐tetrmethyldisiloxane, allyl alcohol, and chloroacetyl chloride as reagents. The molecular structures of HBP‐Cl macroinitiator and β‐CD polymer brushes were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance (¹H NMR), ¹³C nuclear magnetic resonance (¹³C NMR) spectroscopies, size exclusion chromatography/multi‐angle laser light scattering (SEC/MALLS) and laser particle size analyzer. The results indicate that the grafted chain length of two β‐CD polymer brushes can be controlled by changing the feed ratio. Differential scanning calorimetry (DSC) results show that two β‐CD polymer brushes have two glass transition temperatures (T_gs) from a hydrophobic core part and a hydrophilic shell part, respectively, and the T_g from PDMA is higher than that of HBP‐g‐PDMA. Thermalgravimetric analyzer (TGA) analysis indicates that the thermostability of two β‐CD polymer brushes is higher than that of HBP, but is lower than that of HBP‐g‐PDMA. Using phenolphthalein (PP) as a guest molecule, molecular inclusion behaviors for two β‐CD polymer brushes were studied. It reveals that two β‐CD polymer brushes possess molecular inclusion capability in PP buffer solution with a fixed concentration. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5036–5052, 2008     

Rate and Equilibrium Constants of Benzoyl Group Transfer between Pyridine N-Oxides

Kinetic characteristics of 19 transfer reactions of benzoyl group from N-benzoyloxypyridinium salts to pyridine N-oxides and 4-dimethylaminopyridine were studied in acetonitrile by the stopped-flow method. The rate of an identical reaction for 4-methoxypyridine was measured by dynamic NMR spectroscopy. For 5 other identical reactions the rates were estimated from Bronsted correlations. Equilibrium constants were estimated with the use of UV spectrophotometry (6), IR spectroscopy (2), from kinetic data (K _ij = k _ij /k _ji ) (2), and in one case as logK _i−j = logK _i−x − logK _j−x . The second order rate constants (k _ij ) varied in the range 10²–10⁵ l mol⁻¹ s⁻¹, the equilibrium constants (K _ij ) in the range 10²–10⁻²; the activation parameters (ΔH ^≠) were within 15–50 kJ mol⁻¹, (−ΔS ^≠) −20–110 J mol⁻¹ K⁻¹. The reactions under study occur in a single stage following the concerted S_N2 mechanism through an early associative transition state. The benzoyl groups exchange rate and equilibrium are well described by simplified Marcus equation (omitting the quadratic term).__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 5, 2005, pp. 788–792.Original Russian Text Copyright © 2005 by Rybachenko, Schroeder, Chotii, Lenska, Red’ko, Kovalenko.     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.     

In situ synthesis of ABA triblock copolymer nanoparticles by seeded RAFT polymerization: Effect of the chain length of the third a block on the triblock copolymer morphology

Synthesis of the ABA triblock copolymer nanoparticles of poly(N,N‐dimethylacrylamide)‐block‐polystyrene‐block‐poly(N,N‐dimethylacrylamide) (PDMA‐b‐PS‐b‐PDMA) by seeded RAFT polymerization is performed, and the effect of the introduced third poly(N,N‐dimethylacrylamide) (PDMA) block on the size and morphology of the PDMA‐b‐PS‐b‐PDMA triblock copolymer nanoparticles is investigated. This seeded RAFT polymerization affords the in situ synthesis of the PDMA‐b‐PS‐b‐PDMA core‐corona nanoparticles, in which the middle solvophobic PS block forms the compacted core, and the first solvophilic PDMA block and the introduced third PDMA block form the solvated complex corona. During the seeded RAFT polymerization, the introduced third PDMA block extends, and the molecular weight of the PDMA‐b‐PS‐b‐PDMA triblock copolymer linearly increases with the monomer conversion. It is found that, the size of the PS core in the PDMA‐b‐PS‐b‐PDMA triblock copolymer core‐corona nanoparticles is almost equal to that in the precursor of the poly(N,N‐dimethylacrylamide)‐block‐polystyrene diblock copolymer core‐corona nanoparticles and it keeps constant during the seeded RAFT polymerization, and whereas the introduction of the third PDMA block leads to a crowded complex corona on the PS core. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1777–1784     

Deuterium substitution and fluorescence studies on polymer hydrogels and complexes

Deuterium isotope effects on swelling kinetics and volume phase transition in typical polymer hydrogels (poly(N-isopropylacrylamide) and polyacrylamide gels) are discussed. Deuterium substitutions affect on the swelling kinetics and volume phase transition of the polymer hydrogels. The slower swelling kinetics of hydrogels in D₂O than in H₂O arises mainly from the high viscosity of the medium. The deuterium isotope effect on the swelling-shrinking curve of hydrogels would come from the different polymer-solvent interaction. The microenvironments of hydrogels studied by solvatochromic fluorescence probe are compared with the bulk state. The zipper-type hydrogen-bonding inter-polymer complexes (poly(acrylic acid)-polyacrylamide and poly(acrylic acid)-poly(N-acryloylglycineamide)) are also investigated and show the huge isotope effect on the phase separation temperature.     

Synthesis,complexing properties and molecular modelling of open chain receptors of barbiturates derived from 2,6-diamino pyridine

Three new derivatives of 2,6-diacyldiaminopyridine are reported. NMR shift titrations were performed in CDCl₃ with barbiturates. The diamide1 affords a greater complexation energy (–13.00 kJ mol^–1) with bemegride than the dithioamide2 (–9.15 kJ mol^–1). This result, unexpected on the basis of the proton acidities, is explained by the great torsion energy induced in2 by the bulky sulfur atom. Compounds3 and4 present unusual four and five H-bond features with barbital and relatively weak complexation energies (–9.53 and –16.34 kJ mol^–1, respectively). Molecular mechanics indicates that ligand4 displays a helical secondary structure which is disrupted by complexation. Calculations of the H-bond energies (E _calc.) of the intermolecular assemblies with barbital or phenobarbital and other host-guest complexes given in the literature give a good correlation (r=0.98) with experimental values: E _calc.=1.07 G _a–42.0. Limitations of this relation are discussed.     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

Kinetics of the thermal decomposition of [Co(NH3)6]2(C2O4)3·4H2O

The thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O was studied under isothermal conditions in flowing air and argon. Dissociation of the above complex occurs in three stages. The kinetics of the particular stages thermal decomposition have been evaluated. The R_N and/or A_M models were selected as those best fitting the experimental TG curves. The activation energies,E, and lnA were calculated with a conventional procedure and by a new method suggested by Kogaet al. [10, 11]. Comparison of the results have showed that the Arrhenius parameters values estimated by the use of both methods are very close. The calculated activation energies were in air: 96 kJ mol^–1 (R_1.575, stage I); 101 kJ mol^–1 (Ain1.725 stage II); 185 kJ mol^–1 (A _2.9, stage III) and in argon: 66 kJ mol^–1 (A _1.25, stage I); 87 kJ mol^–1 (A _1.825, stage II); 133 kJ mol^–1 (A _2.525, stage III).     

Ionic Transport in Dilute Solid Polymer Electrolytes with Amorphous Structure

The ionic structure and transport properties of amorphous solid polymer electrolytes in the system copolymer of acrylonitrile and butadiene (40 : 60)—lithium hexafluoroarsenate (SPE) is studied in the region of small salt concentrations (up to 0.37 mol dm⁻³) at 298–368 K. In conditions studied, LiAsF₆ is dissociated predominantly to ions. Macroscopic models of ion transport are used to analyze the results of measurements of transport characteristics of SPE. Transport of anions free of the polymer matrix is realized activationlessly and resembles the Stokes drift in viscous media. Transport of cations solvated by electron-donating groups of the polymer turns possible only at temperatures in excess of a critical value (T _crit ≈ 333 K), when the statistical mean of molecules in the first coordination sphere of the lithium cation becomes less than four (which is the coordination number for solvation) and requires the overcoming of an energy barrier of ∼6 kJ mol⁻¹. Below T _crit, the SPE are unipolar anionic conductors.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 537–545.Original Russian Text Copyright © 2005 by Bushkova, Sofronova, Lirova, Zhukovskii.