Competitional hydrophobicity driven separations under RP‐LC mechanism: Application to sulfonylurea congeners

Retention of a model set of sulfonylurea compounds has been studied under RP‐LC conditions, considering competitional effects brought by different alcohols (ethanol, 1‐propanol, 2‐propanol, 1‐butanol, 1‐pentanol, and 1‐octanol) used as additives in the organic component of the mobile phase (methanol). The capacity factors determined for the model compounds decreased with the increase of the hydrophobic character of the organic additive in the mobile phase. The amount of the additive within the organic component of the mobile phase was kept constant (1% as volumetric ratio). Retention was studied at different mobile phase compositions (aqueous to organic component ratios). Different functional fitting models were used to correlate retention to the content of the organic component in the mobile phase. Extrapolation of retention expressed as capacity factor to a mobile phase composition free of organic component is well correlated to the hydrophobic characteristics of the organic additives. The adsorption model was used for tuning the experimental find‐outs. The possibility of controlling retention through the competitive effects induced by hydrophobic additives in the mobile phase is highlighted.     

Analysis of polar peptides using a silica hydride column and high aqueous content mobile phases

The retention behavior of a set of polar peptides separated on a silica hydride stationary phase was examined with a capillary HPLC system coupled to ESI‐MS detection. The mobile phases consisted of formic acid or acetic acid/acetonitrile/water mixtures with the acetonitrile content ranging from 5 to 80% v/v. The effects on peptide retention of these two acidic buffer additives and their concentrations in the mobile phase were systematically investigated. Strong retention of the peptides on the silica hydride phase was observed with relatively high‐organic low‐aqueous mobile phases (i.e. under aqueous normal‐phase conditions). However, when low concentrations of acetic acid were employed as the buffer additive, strong retention of the peptides was also observed even when high aqueous content mobile phases were employed. This unique feature of the stationary phase therefore provides an opportunity for chromatographic analysis of polar peptides with water‐rich eluents, a feature usually not feasible with traditional RP sorbents, and thus under conditions more compatible with analytical green chemistry criteria. In addition, both isocratic and gradient elution procedures can be employed to optimize peptide separations with excellent reproducibility and resolution under these high aqueous mobile phase conditions with this silica hydride stationary phase.     

Insights into the retention mechanism on an octadecylsiloxane-bonded silica stationary phase (HyPURITY C18) in reversed-phase liquid chromatography

Plots of the retention factor against mobile phase composition were used to organize a varied group of solutes into three categories according to their retention mechanism on an octadecylsiloxane-bonded silica stationary phase HyPURITY C18 with methanol-water and acetonitrile-water mobile phase compositions containing 10-70% (v/v) organic solvent. The solutes in category 1 could be fit to a general retention model, Eq. (2), and exhibited normal retention behavior for the full composition range. The solutes in category 2 exhibited normal retention behavior at high organic solvent composition with a discontinuity at low organic solvent compositions. The solutes in category 3 exhibited a pronounced step or plateau in the middle region of the retention plots with a retention mechanism similar to category 1 solutes at mobile phase compositions after the discontinuity and a different retention mechanism before the discontinuity. Selecting solutes and appropriate composition ranges from the three categories where a single retention mechanism was operative allowed modeling of the experimental retention factors using the solvation parameter model. These models were then used to predict retention factors for solutes not included in the models. The overwhelming number of residual values [log k (experimental) - log k (model predicted)] were negative and could be explained by contributions from steric repulsion, defined as the inability of the solute to insert itself fully into the stationary phase because of its bulkiness (i.e., volume and/or shape). Steric repulsion is shown to strongly depend on the mobile phase composition and was more significant for mobile phases with a low volume fraction of organic solvent in general and for mobile phases containing methanol rather than acetonitrile. For mobile phases containing less than about 20 % (v/v) organic solvent the mobile phase was unable to completely wet the stationary phase resulting in a significant change in the phase ratio and for acetonitrile (but less so methanol) changes in the solvation environment indicated by a discontinuity in the system maps.     

多糖衍生物手性固定相上采用酸性或碱性添加剂的流动相拆分β受体阻滞剂对映体

考察了多糖类手性固定相在含有酸性或碱性添加剂的流动相下高效液相色谱法拆分β受体阻滞剂对映体的效果。色谱条件: 流动相为10%～30%(体积分数,下同)乙醇-正己烷(含0.1%三氟乙酸)和10%～30%乙醇-正己烷(含0.1%三乙胺),流速1.0 mL/min,紫外检测波长254 nm。结果表明,在直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)衍生物手性固定相(Chiralpak AD和Chiralpak IA)上拆分β受体阻滞剂对映体,酸性添加剂的流动相体系与碱性添加剂的流动相体系相比,碱性添加剂的流动相的拆分效果比酸性添加剂的流动相要好。而在纤维素-三(3,5-二甲基苯基氨基甲酸酯)衍生物的手性固定相(Chiralcel OD和Chiralpak IB)上分离β受体阻滞剂,比较酸性添加剂的流动相与碱性添加剂的流动相的拆分效果,发现酸性添加剂的流动相条件下对映体的保留减弱,但对映体的选择性增大,特别是在Chiralcel OD上,酸性添加剂的流动相体系对对映体的选择性非常理想,而且随着流动相中酸性添加剂含量的增加,β受体阻滞剂对映体的分离效果更佳。     

Simultaneous isocratic separation of phenolic acids and flavonoids using micellar liquid chromatography

The simultaneous isocratic separation of a mixture of five phenolic acids and four flavonoids (two important groups of natural polyphenolic compounds with very different polarities) was investigated in three different RPLC modes using a hydro‐organic mobile phase, and mobile phases containing SDS at concentrations below and above the critical micellar concentration (submicellar LC and micellar LC (MLC), respectively). In the hydro‐organic mode, methanol and acetonitrile; in the submicellar mode methanol; and in the micellar mode, methanol and 1‐propanol were examined individually as organic modifiers. Regarding the other modes, MLC provided more appropriate resolutions and analysis time and was preferred for the separation of the selected compounds. Optimization of separation in MLC was performed using an interpretative approach for each alcohol. In this way, the retention of phenolic acids and flavonoids were modeled using the retention factors obtained from five different mobile phases, then the Pareto optimality method was applied to find the best compatibility between analysis time and quality of separation. The results of this study showed some promising advantages of MLC for the simultaneous separation of phenolic acids and flavonoids, including low consumption of organic solvent, good resolution, short analysis time, and no requirement of gradient elution.     

Study of influence of additives of tyloxapol on the chromatographic characteristics of the model compounds: the comparative characterization of micellar mobile phases of tyloxapol and Triton X‐100

The chromatographic behavior of model compounds of biomedical significance (organic acids, amino acids, drugs) was investigated using mobile phases modified with tyloxapol. The influence of factors such as concentration of tyloxapol, content of organic modifier and pH of mobile phase on the retention factor of solutes was studied. The results were compared with the data obtained by elution with mobile phases containing Triton X‐100 additives, since units of Triton X‐100 are repeated in the structure of tyloxapol. Divergence in chromatographic behavior of model compounds was explained by the difference in physico‐chemical characteristics (microviscosity, polarity, critical micelle concentration, shape of micelles, etc.) of tyloxapol and Triton X‐100 micelles. Copyright © 2009 John Wiley & Sons, Ltd.     

Enantioresolution of basic pharmaceuticals using cellulose tris(4-chloro-3-methylphenylcarbamate) as chiral stationary phase and polar organic mobile phases

A polysaccharide-based chiral stationary phase (Sepapak-4), with cellulose tris(4-chloro-3-methylphenylcarbamate) as chiral selector, has been investigated in liquid chromatography (LC). Its enantioresolution power was evaluated towards 13 basic amino-drugs with widely different structures and polarities, using polar organic mobile phases. After preliminary experiments, acetonitrile was selected as the main mobile phase component, to which a low concentration of diethylamine (0.1%) was systematically added in order to obtain efficient and symmetrical peaks. Different organic solvents were first added in small proportions (5–10%) to acetonitrile to modulate analyte retention. Polar organic modifiers were found to decrease retention and enantioresolution while hexane had the opposite effect, indicating normal-phase behaviour under these conditions. The addition of an organic acid (formic, acetic or trifluoroacetic acid) was found to strongly influence the retention of the basic amino drugs in these nonaqueous systems. The nature and proportion of the acidic additive in the mobile phase had also deep impact on enantioresolution. Therefore, the studied compounds could be subdivided in three groups in respect to the acidic additive used. All analytes could be enantioseparated in relatively short analysis times (10–20 min) using these LC conditions.     

Effect of ionic liquid additives to mobile phase on separation and system efficiency for HPLC of selected alkaloids on different stationary phases

The silica-based stationary phases with favorable physical characteristics are the most popular in liquid chromatography. However, there are several problems with silica-based materials: severe peak tailing in the chromatography of basic compounds, non-reproducibility for the same chemistry columns, and limited pH stability. Ionic liquids (ILs) as mobile phase components can reduce peak tailing by masking residual free silanol groups. The chromatographic behavior of some alkaloids from different classes was studied on C18, phenyl, and pentafluorophenyl columns with different kinds and concentrations of ionic liquids as additives to aqueous mobile phases. Ionic liquids with different alkyl substituents on different cations or with different counterions as eluent additives were investigated. The addition of ionic liquids has great effects on the separation of alkaloids: decrease in band tailing, increase in system efficiency, and improved resolution. The retention, separation selectivity, and sequence of alkaloid elution were different when using eluents containing various ILs. The increase of IL concentration caused an increase in silanol blocking, thus conducted to decrease the interaction between alkaloid cations and free silanol groups, and caused a decrease of alkaloids retention, improvement of peak symmetry, and increase of theoretical plate number in most cases. The effect of ILs on stationary phases with different properties was also examined. The different properties of stationary phases resulted in differences in analyte retention, separation selectivity, peak shape, and system efficiency. The best shape of peaks and the highest theoretical plate number for most investigated alkaloids in mobile phases containing IL was obtained on pentafluorophenyl (PFP) phase.     

High performance liquid chromatography-mass spectrometric analysis of sulphonated dyes and intermediates

This paper reports our results in the analysis of polysulphonated anionic dyes and their intermediates using high-performance liquid chromatography-mass spectrometry (HPLC-MS). Negative-ion electrospray ionization is the most suitable ionization technique for the molecular mass determination of polysulphonated dyes or other dyes carrying a negative charge. From the series of [M-xH]x- ions and their sodiated adducts [M-(x + y)H+yNa]x-, the molecular mass and the number of sulphonic and carboxylic groups can be determined. The mobile phase should be compatible with the mass spectrometric detection, which rules out non-volatile tetraalkylammonium salts usually used as ion-pair mobile phase additives for the HPLC of sulphonated compounds. Some mono- and disulphonated dyes and intermediates can be separated with aqueous-organic mobile phases containing 5 mM ammonium acetate, which is the most suitable additive as far as compatibility with MS detection is concerned. However, the retention of compounds with two or more sulphonic groups is too low for a successful separation both with this mobile phase additive and with ion-pair additives with short alkyl chains. The dihexylammonium acetate ion-pairing reagent offers a reasonable compromise in terms of sufficient volatility and adequate retention and separation selectivity for the HPLC-MS analysis of polysulphonated dyes.     

Accessible silanol sites - beneficial for the RP-HPLC separation of constitutional and diastereomeric azaspirovesamicol isomers

Different RP-HPLC columns (phenyl, conventional ODS, cross-linked C(18) and special end-capped C(8) and C(18) phases) were used to investigate the separation of four basic ionizable isomers. Using ACN/20mM NH(4)OAc aq., a separation was observed exclusively on RP columns with higher silanol activity at unusual high ACN concentration, indicating cation-exchange as main retention mechanism. Using MeOH/20mM NH(4)OAc aq., another separation at low MeOH concentrations was observed on both, RP columns with higher as well as RP columns with lower silanol activity, which is mainly based on hydrophobic interactions. The isomers were also separated on a bare silica column at higher MeOH content using NH(4)OAc. Since cation-exchange governs this retention, the elution order was different compared to the RP phases. A strong retention on the silica column was observed in ACN, which could be attributed to partition processes as additional retention mechanism.     

Optimization of the LC enantioseparation of chiral pharmaceuticals using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as chiral selector and polar non‐aqueous mobile phases

The resolving power of a new commercial polysaccharide‐based chiral stationary phase, Sepapak‐4, with cellulose tris(4‐chloro‐3‐methylphenylcarbamate) coated on silica microparticles as chiral selector, was evaluated toward the enantioseparation of ten basic drugs with widely different structures and hydrophobic properties, using ACN as the main component of the mobile phase. A multivariate approach (experimental design) was used to screen the factors (temperature, n‐hexane content, acidic and basic additives) likely to influence enantioresolution. Then, the optimization was performed using a face‐centered central composite design. Complete enantioseparation could be obtained for almost all tested chiral compounds, demonstrating the high chiral discrimination ability of this chiral stationary phase using polar organic mobile phases made up of ACN and containing an acidic additive (TFA or formic acid), 0.1% diethylamine and n‐hexane. These results clearly illustrate the key role of the nature of the acidic additive in the mobile phase.     

Evaluation of chlorine containing cellulose-based chiral stationary phases for the LC enantioseparation of basic pharmaceuticals using polar non-aqueous mobile phases

The discrimination ability of three cellulose-based chiral stationary phases (CSPs) was evaluated towards the enantiomers of basic drugs, using ACN as the main solvent in polar organic mobile phases. The study was focused on CSPs containing cellulose tris(3-chloro-4-methylphenylcarbamate) (3-Cl-4-MePC), cellulose tris(4-chloro-3-methylphenylcarbamate) (4-Cl-3-MePC) or cellulose tris(3,5-dichlorophenylcarbamate) (3,5-diClPC) as the chiral selector. The behaviour of these CSPs was studied systematically in order to investigate the influence of the presence and position of the chlorine substituents on the phenylcarbamate moieties on the retention and resolution of the enantiomers. The evaluation was made with three different generic mobile phases, namely ACN/0.1%DEA/0.1% TFA (DEA, diethylamine), ACN/0.1%DEA/0.2% FA and ACN/0.1%DEA/0.2%AcA, deduced from the previous study. The nature of the acidic additive and of the chiral selector was found to be particularly important for the retention and enantioresolution of these basic compounds. High-resolution values could be obtained for most studied enantiomers with these CSPs, clearly demonstrating the interest of using them in combination with polar organic mobile phases. However, significant differences in enantioresolution between the CSPs have been observed for many compounds, indicating that these phases seem to be quite complementary.     

Micellar bile salt mobile phases for the liquid chromatographic separation of routine compounds and optical, geometrical, and structural isomers

Aqueous solutions of bile salts, i.e. sodium cholate (NaC), sodium deoxycholate (NaDC), and sodium taurocholate (NaTC), are characterized and evaluated as reversed-phase liquid chromatographic (RPLC) mobile phases. The separation of the ASTM-recommended RPLC test mix in addition to more than 50 other compounds on a C18 column demonstrates the viability of these bile salts as HPLC mobile phases. The Armstrong-Nome theory was applied and found to adequately describe the partitioning behavior of solutes eluted with these bile salts at low surfactant concentrations. The effect of alcohol additives on chromatographic retention and efficiency was also assessed. Not only are the bile salt molecules rigid and chiral, but they form helical micellar aggregates as well. Consequently, many isomeric compounds can be easily resolved with this mobile phase additive. The base-line resolution of some binaphthyl-type enantiomers with a standard C18 column and the bile salt micellar mobile phases is also demonstrated. In addition, these bile salt mobile phases may be preferable to conventional hydroorganic mobile phase systems for the separation of many classes of routine compounds. A brief prospectus on the future utilization of bile salts in liquid chromatography is presented.     

Prediction of Chromatographic Retention of Pyrazine and Alkylpyrazines in RP-LC

Retention prediction models for a group of pyrazines chromatographed under reversed-phase mode were developed using multiple linear regression (MLR) and artificial neural networks (ANNs). Using MLR, the retention of the analytes were satisfactorily described by a two-predictor model based on the logarithm of the partition coefficient of the analytes (log P) and the percentage of the organic modifier in the mobile phase (ACN or MeOH). ANN prediction models were also derived using the predictors derived from MLR as inputs and log k as outputs. The best network architecture was found to be 2-2-1 for both ACN and MeOH data sets. The optimized ANNs showed better predictive properties than the MLR models especially for the ACN data set. In the case of the MeOH data set, the MLR and ANN models have comparable predictive performance.     

Dual‐mode hydrophilic interaction normal phase and reversed phase liquid chromatography of polar compounds on a single column

Adopting a stationary phase convention circumvents problematic definition of the boundary between the stationary and the mobile phase in the liquid chromatography, resulting in thermodynamically consistent and reproducible chromatographic data. Three stationary phase definition conventions provide different retention data, but equal selectivity: (i) the complete solid phase moiety; (ii) the solid porous part carrying the active interaction centers; (iii) the volume of the inner column pores. The selective uptake of water from the bulk aqueous‐organic mobile phase significantly affects the volume and the properties of polar stationary phases. Some polar stationary phases provide dual‐mode retention mechanism in aqueous‐organic mobile phases, reversed‐phase in the water‐rich range, and normal‐phase at high concentrations of the organic solvent in water. The linear solvation energy relationship model characterizes the structural contributions of the non‐selective and selective polar interactions both in the water‐rich and organic solvent‐rich mobile phases. The inner‐pore convention provides a single hold‐up volume value for the retention prediction on the dual‐mode columns over the full mobile phase range. Using the dual‐mode monolithic polymethacrylate zwitterionic micro‐columns alternatively in each mode in the first dimension of two‐dimensional liquid chromatography, in combination with a short reversed‐phase column in the second dimension, provides enhanced sample information.     

Modelling and prediction of retention in high-performance liquid chromatography by using neural networks

Summary Multi-layer feed-forward neural networks trained with an error back-propagation algorithm have been used to model retention behaviour of liquid chromatography as a function of the composition of the mobile phases. Conventional hydro-organic and micellar mobile phases were considered. Accurate retention modelling and prediction have been achieved using mobile phases defined by two, three and four parameters. With micellar mobile phases, the parameters involved included the concentrations of surfactant and organic modifier, pH and temperature. It is shown that neural networks provide a competitive tool to model varied inherent nonlinear relationships of retention behaviour with respect to the mobile phase parameters. The soft models defined by the weights of the networks are capable of accommodating all types of linear and nonlinear relationships, neural networks being specially useful when the relationships between retention behaviour and the mobile phase parameters are unknown. However, to train neural networks more experimental points than with hard-modelling methods are required, hence the use of the networks is recommended only for those cases where adequate theoretical or empirical models do not exist.     

Effect of the mobile phase composition on the adsorption behavior of tryptophan in reversed-phase liquid chromatography

Single-component adsorption isotherm data of l-tryptophan on a C18-bonded silica column were acquired by frontal analysis (FA), with aqueous mobile phases containing 2.5, 5, and 7.5% of acetonitrile (ACN) or 7, 10, 15, and 20% of methanol (MeOH). Most of these isotherms have two inflection points and three different parts. The low and the high concentration parts exhibit langmuirian behavior. The intermediate part exhibits anti-langmuirian behavior. The inflection points shift toward higher concentrations with increasing mobile phase concentration in ACN or MeOH, which causes the differences in the isotherm profiles. The nature of the organic modifier and its concentration affect only the isotherm profile and the numerical values of its parameters, not the nature of the best model, which is the bi-Moreau model in all cases. The isotherm profiles depend on the experimental conditions because they affect the intensity of the adsorbate-adsorbate interactions. Overloaded band profiles of tryptophan were recorded with the seven mobile phase compositions. They were used to determine the best values of the isotherm coefficients by the inverse method (IM) of chromatography. There is an excellent agreement between the values of these parameters obtained by FA and by IM. Increasing the concentration of either ACN or MeOH in the mobile phase causes a slight decrease in the saturation capacities of the low and the high energy sites, and in the adsorption constant of the low energy sites. The adsorption constant of the high energy sites increases with increasing concentration of either solvent or is little affected. The adsorbate-adsorbate interaction constants of both low and high energy sites increase for both solvents. Saturation capacities of the high energy sites are higher for ACN than for MeOH.     

Retention and Thermodynamic Studies of Piperazine Diastereomers in Reversed-Phase Liquid Chromatography

The effect of organic modifier concentration on retention and selectivity of two piperazine diastereomers in a typical n-octadecyl-bonded silica (ODS) column was investigated at pH 6.4 and pH 3.0 using phosphate-buffered acetonitrile (MeCN/H₂O) and methanol (MeOH/H₂O) mobile phases. The results show the logarithmic retention factors decrease with increasing organic concentration in a less rectilinear fashion in the MeCN/H₂O system than in the MeOH/H₂O system at high organic concentrations at both pHs. At pH 6.4, the MeOH/H₂O system provided significantly higher diastereomer selectivity than the MeCN/H₂O system, which can be ascribed to the hydrogen bonding interaction of methanol (as a hydrogen donor) with the piperazine amine moiety of the solute (as a hydrogen acceptor). At pH 3.0, both mobile phases provided high selectivity, in which both acetonitrile and methanol acted as hydrogen acceptors, while the protonated amine acted as the hydrogen donor. The effect of temperature on retention and selectivity was also studied in the two mobile phase systems at both pHs. It was found that at pH 6.4 the retention and selectivity were enthalpically driven in the MeOH/H₂O system, while entropically driven in the MeCN/H₂O system. However, the retention was entropically driven and the selectivity enthalpically driven in both systems at pH 3.0. Locally preferential solvating and hydrogen bonding effects are proposed to explain the anomalous retention and selectivity behaviors.     

Suitability of ionic liquids as mobile‐phase additives in HPLC with fluorescence and UV detection for the determination of heterocyclic aromatic amines

The effects of several ionic liquids (ILs) as mobile‐phase additives in HPLC with fluorescence and UV–Vis detection for the determination of six heterocyclic aromatic amines were evaluated using two different C₁₈ stationary phases with moderate silanol activity. The studied ILs were 1‐butyl‐3‐methylimidazolium tetrafluoroborate, 1‐hexyl‐3‐methylimidazolium tetrafluoroborate and 1‐methyl‐3‐octylimidazolium tetrafluoroborate. The optical behaviour of heterocyclic aromatic amines in presence of ILs was studied and the silanol‐suppressing potency of ILs was evaluated for the two stationary phases studied. Several chromatographic parameters were evaluated in the presence or absence of ILs, or using triethylamine, the most common mobile‐phase additive. The best results were achieved using 1 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as mobile‐phase additive and NovaPak^® column. In these conditions and with 18% of ACN in the mobile phase, analytical performance of the chromatographic methods using fluorescence and UV–Vis were evaluated, obtaining good precision in all cases (RSD lower than 6.6%) and low LOD (0.001–0.147 μg/mL with UV–Vis and 0.001–0.006 ng/mL with fluorescence detection).