Zinc-zinc bonded zincocene structures. Synthesis and characterization of Zn2(eta5-C5Me5)2 and Zn2(eta5-C5Me4Et)2

While, in general, decamethylzincocene, Zn(C5Me5)2, and other zincocenes, Zn(C5Me4R)2 (R = H, But, SiMe3), react with dialkyl and diaryl derivatives, ZnR'2, to give the half-sandwich compounds (eta5-C5Me4R)ZnR', under certain conditions the reactions of Zn(C5Me5)2 with ZnEt2 or ZnPh2 produce unexpectedly the dizincocene Zn2(eta5-C5Me5)2 (1) in low yields, most likely as a result of the coupling of two (eta5-C5Me5)Zn* radicals. An improved, large scale (ca. 2 g) synthesis of 1 has been achieved by reduction of equimolar mixtures of Zn(C5Me5)2 and ZnCl2 with KH in tetrahydrofuran. The analogous reduction of Zn(C5Me4R)2 (R = H, SiMe3, But) yields only decomposition products, but the isotopically labeled dimetallocene 68Zn2(eta5-C5Me5)2 and the related compound Zn2(eta5-C5Me4Et)2 (2) have been obtained by this procedure. Compound 2 has lower thermal stability than 1, but it has been unequivocally characterized by low-temperature X-ray diffraction studies. As for 1 a combination of structural characterization techniques has provided unambiguous evidence for its formulation as the Zn-Zn bonded dimer Zn2(eta5-C5Me4Et)2, with a short Zn-Zn bond of 2.295(3) A indicative of a strong Zn-Zn bonding interaction. The electronic structure and the bonding properties of 1 and those of related dizincocenes Zn2(eta5-Cp')2 have been studied by DFT methods (B3LYP level), with computed bond distances and angles for dizincocene 1 very similar to the experimental values. The Zn-Zn bond is strong (ca. 62 kcal.mol-1 for 1) and resides in the HOMO-4, that has a contribution of Zn orbitals close to 60%, consisting mostly of the Zn 4s orbitals (more than 96%).     

Acidites et complexes des acides (alkyl-et aminoalkyl-) phosphoniques-IV: acides aminoalkylphosphoniques R(1)R(2)N(CH(2))(n)CR(3)R(4)PO(3)H(2)

The acids under study differed from one another in length of the carbon chain [N + H(3)(CH(2))(n)PO(3)H(-) for n = 1, 2, 3], substitution on the nitrogen atom [R(1)R(2)N + HCH(2)PO(3)H(-) for R(1) = H; R(2) = Me, Et and R(1) = R(2)= Me, Et] or extent of branching on the carbon atom adjacent to functional groups [N + H(3)CR(3)R(4)PO(3)H(-) for R(3) = H; R(4) = Me, Et, nPr, iPr, nBu and R(3) = R(4) = Me]. Acidity constants and overall stability constants of complexes formed with Ca(II), Mg(II), Co(II), Ni(II), Cu(II), Zn(II) were obtained with the multiparametric refinement programs MUPROT and MUCOMP, applied to potentiometric data, obtained at 25 degrees , in a 0.1M potassium nitrate medium. In the most general case, the existing species are MHA(+), MA, M(OH)A(-), MH(2)A(2), MHA(-)(2) and MA(2-)(2), where A(2-) stands for the fully ionized ligand; preliminary examination of results points out some predominant microscopic forms.     

Synthesis of zinc trisubstituted hydrazido complexes and ortho-metalation of 4-(dimethylamino)pyridine

The zinc hydrazide complexes [EtZn(N(SiMe(3))NMe(2))](2), [EtZn(N(Me)NMe(2))](4), and Zn(3)Et(4)(N(Et)NMe(2))(2) were synthesized by allowing excess hydrazine, HN(R)NMe(2), to react with diethyl zinc. The product of the reaction between ZnEt(2) and HN(i-Pr)NMe(2)ortho-metalated 4-(dimethylamino)pyridine (DMAP) at room temperature, producing the complex Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2). At elevated temperatures, Zn(3)Et(4)(N(Et)NMe(2))(2) also ortho-metalated DMAP, but [EtZn(N(Me)NMe(2))](4) did not. Single-crystal X-ray diffraction studies revealed that the hydrazide ligands in [EtZn(N(SiMe(3))NMe(2))](2) act as bridging mono-hapto amide ligands, and in Zn(3)Et(4)(N(Et)NMe(2))(2) and Zn[(NC(5)H(3)-p-NMe(2))ZnEt(N(i-Pr)NMe(2))](2) the hydrazide ligands are di-hapto.     

Bimetallic anilido-aldimine zinc complexes for epoxide/CO2 copolymerization

Acyclic o-phenylene-bridged bis(anilido-aldimine) compounds, o-C(6)H(4){C(6)H(2)R(2)N=CH-C(6)H(4)-(H)N(C(6)H(3)R'(2))}(2) and related 30-membered macrocyclic compounds, o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-(H)N-C(6)H(2)R(2)}(2) (o-C(6)H(4)) are prepared. Successive additions of Me(2)Zn and SO(2) gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes, o-C(6)H(4){(C(6)H(2)R(2)N=CH-C(6)H(4)-N(C(6)H(3)R'(2))-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (R = iPr and R' = iPr, 29; R = Et and R' = Et, 30; R = Me and R'= Me, 31; R = Me and R' = iPr, 32; R = Et and R' = Me, 33; R = Et and R' = iPr, 34; R = iPr and R' = Et, 35) and o-C(6)H(4){C(6)H(2)R'(2)N=CH-C(6)H(4)-N-C(6)H(2)R(2)-kappa(2)-N,N)Zn(mu-OS(O)Me)}(2) (o-C(6)H(4)) (R = Et and R'= Et, 36; R = Me and R' = Me, 37; R = iPr and R' = Me, 38; R = Et and R' = Me, 39; R = Me and R'= iPr, 40). Molecular structures of 34 and 40 are confirmed by X-ray crystallography. Complexes 30-35 show high activity for cyclohexene oxide/CO(2) copolymerization at low [Zn]/[monomer] ratio (1:5600), whereas the complex of mononucleating beta-diketiminate {[(C(6)H(3)Et(2))N=C(Me)CH=C(Me)N(C(6)H(3)Et(2))]Zn(mu-OS(O)Et)}(2) shows negligible activity in the same condition. Activity is sensitive to the N-aryl ortho substituents and the highest activity is observed with 32. Turnover number up to 2980 and molecular weight (M(n)) up to 284 000 are attained with 32 at such a highly diluted condition as [Zn]/[monomer] = 1:17 400. Macrocyclic complexes 36-40 show negligible activity for copolymerization.     

Mono- versus bis-chelate formation in triazenide and amidinate complexes of magnesium and zinc

Magnesium and zinc complexes of the monoanionic ligands N,N'-bis(2,6-di-isopropylphenyl)triazenide, L1, N,N'-bis(2,6-di-isopropylphenyl)acetamidinate, L2, and N,N'-bis(2,6-di-isopropylphenyl)tert-butylamidinate, L3, have been synthesized, but only L3 possesses sufficient steric bulk to prevent bis-chelation. Hence, the reaction of L1H with excess ZnEt2 leads to the isolation of (L1)2Zn, 1; L1H also reacts with Bu2Mg in Et2O to afford (L1)2Mg(Et2O), 2. Similar reactivity is observed for L2H, leading to the formation of (L2)2Zn, 3, and (L2)2Mg, 4. The reaction of L2H with ZnR2 may also afford the tetranuclear aggregates {(L2)Zn2R2}2O, 5 (R=Me) and 6 (R=Et). By contrast, the tert-butylamidinate ligand was found to exclusively promote mono-chelation, allowing (L3)ZnCl(THF), 7, [(L3)Zn(micro-Cl)]2, 8, (L3)ZnN(SiMe3)2, 9, (L3)MgiPr(Et2O), 10, and (L3)MgiPr(THF), 11, to be isolated. X-ray crystallographic analyses of 1, 2, 3, 4, 5, 6, 8, and 10 indicate that the capacity of L3 to resist bis-chelation is due to greater occupation of the metal coordination sphere by the N-aryl substituents.     

Iron catalyzed polyethylene chain growth on zinc: a study of the factors delineating chain transfer versus catalyzed chain growth in zinc and related metal alkyl systems

The bis(imino)pyridine iron complex, [[2,6-(MeC=N-2,6-iPr2C6H3)2C5H)N]FeCl2] (1), in combination with MAO and ZnEt2 (> 500 equiv.), is shown to catalyze polyethylene chain growth on zinc. The catalyzed chain growth process is characterized by an exceptionally fast and reversible exchange of the growing polymer chains between the iron and zinc centers. Upon hydrolysis of the resultant ZnR2 product, a Poisson distribution of linear alkanes is obtained; linear alpha-olefins with a Poisson distribution can be generated via a nickel-catalyzed displacement reaction. Other dialkylzinc reagents such as ZnMe2 and ZniPr2 also show catalyzed chain growth; in the case of ZnMe2 a slight broadening of the product distribution is observed. The products obtained from Zn(CH2Ph)2 show evidence for chain transfer but not catalyzed chain growth, whereas ZnPh2 shows no evidence for chain transfer. The Group 13 metal alkyl reagents AlR3 (R = Me, Et, octyl, IBu) and GaR3 (R = Et, nBu) act as highly efficient chain transfer agents, whereas GaMe3 exhibits behavior close to catalyzed chain growth. LinBu, MgnBu2 and BEt3 result in very low activity catalyst systems. SnMe4 and PbEt4 give active catalysts, but with very little chain transfer to Sn or Pb. The remarkably efficient iron catalyzed chain growth reaction for ZnEt2 compared to other metal alkyls can be rationalized on the basis of: (1) relatively low steric hindrance around the zinc center, (2) their monomeric nature in solution, (3) the relatively weak Zn-C bond, and (4) a reasonably close match in Zn-C and Fe-C bond strengths.     

A theoretical study of the effect of a tetraalkylammonium counterion on the hydrogen bond strength in Z-hydrogen maleate.

High-level ab initio calculations (B3LYP/6-31+G and QCISD(T)/6-311+G**) were carried out to resolve the disagreement between recent experimental and computational estimates of the relative strength of the intramolecular hydrogen bond in Z-hydrogen maleate anion with respect to the normal hydrogen bond in maleic acid. The computational estimates for the strength of the intramolecular hydrogen bond in the gas-phase maleate anion are in a range of 14-28 kcal/mol depending on the choice of the reference structure. Computational data suggest that the electrostatic influence of a counterion such as a tetraalkylammonium cation can considerably weaken the hydrogen bonding interaction (by 1.5-2 times) in the complexed hydrogen maleate anion relative to that in the naked anion. The estimated internal H-bonding energies for a series of Z-maleate/R4N+ salts (R = CH3, C2H5, CH3CH2CH2CH2) range from 8 to 13 kcal/mol. The calculated energy differences between the E- and Z-hydrogen maleates complexed to Me4N+, Et4N+, and Bu4N+ cation are 4.9 (B3LYP/6-31+G(d,p)) and 5.7 and 5.8 kcal/mol (B3LYP/6-31G(d)). It is also demonstrated that the sodium cation exerts a similar electrostatic influence on the hydrogen bond strength in bifluoride anion (FHF-). The present study shows that while low-barrier short hydrogen bonds can exist in the gas phase (the barrier for the hydrogen transfer in maleate anion is only 0.2 kcal/mol at the QCISD(T)/6-311+G//QCISD/6-31+G level), whether they can also be strong in condensed media or not depends on how their interactions with their immediate environment affect their strength.     

Organozinc hydroxylamides: on the bulk-dependent interplay of nuclearity, structure and dynamics

The reactions of zinc dialkyls, R(2)Zn (1a-d; R = Me (a), Et (b), iPr (c) and tBu (d)), with N,N-dialkylhydroxylamines, HO-NR'(2) (2a-c; R' = Me (a), Et (b) and iPr (c)), afford organozinc hydroxylamides under alkane extrusion. Species of different nuclearity are observed, depending on the hydroxylamine 2 employed. The smaller 2a and 2b give pentanuclear complexes of the general formula Zn(RZn)(4)O-NR'(2))(6) (R = Me, Et, iPr and tBu; R' = Me and Et), whereas the derivatives of 2c are tetramers of the general formula (RZn)(4)(O-NR'(2))(4) (R = Me, Et and iPr; R' = iPr) as governed by bulk issues about the N-donor. Due to the ability of the double-donor unit O-NR(2) to change its bridging mode, two coordination isomers exist for both types of compounds. The pentanuclear species crystallise either in a heterofenestrane or an octahedroid motif. For these species, the central Zn atom exhibits either coordination number 4 or 6; in solution, a rapid change between coordination isomers is observed. Due to the absence of a central Zn atom in the tetranuclear species, these aggregate in heterocubane geometries or such derived thereof. They display the O-N units in either κ(3)O or κ(2)O;κ(1)N mode. The tetranuclear species are also yielded with the less sterically encumbered precursors under thermodynamic conditions (i.e. reflux), as exemplified by the reaction of Me(2)Zn (1a) with HO-NEt(2) (2b). They are non-dynamic in solution, showing that a central cation is mandatory for the fluxional behaviour observed for the pentanuclear derivatives. DFT studies on the O-NMe(2) series reveal that the relative energies of the pentazinc isomers become more similar with increasing RZn group size; possible conversions of these to their tetrazinc counterparts were also scrutinised. Two κ(3)O-bridged degradation products of hydroxylamide complexes could be structurally characterised. They were formed either by partial product hydrolysis, or by in situ oxygenation of the starting zinc dialkyl.     

Bimetallic fluorine-substituted anilido-aldimine zinc complexes for CO2/(cyclohexene oxide) copolymerization

Regioselective nucleophilic aromatic substitution of an o-fluorine occurs to afford fluorine-substituted o-phenylene-bridged bis(anilido-aldimine) compounds o-C6H4[(C6H2R2)N=CH-C6F4-(H)N(C6H3R'2)]2 when Li(H)N-C6H3R'2 (R' = iPr, Et, Me) is reacted with o-C6H4[(C6H2R2)N=CH-C6F5]2 (R = iPr, Et, Me) in a nonpolar solvent such as diethyl ether or toluene. Successive additions of Me2Zn and SO2 gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes o-C6H4[[(C6H2R2)N=CH-C6F4-N(C6H3R'2)-kappa2N,N]Zn(mu-OS(O)Me)]2 (R = iPr, R' = iPr, 3a; R = iPr, R' = Me, 3c; R = Et, R' = (i)Pr, 3d; R = Et, R' = Et, 3e; R = Et, R' = Me, 3f; R = Me, R' = iPr, 3g; R = Me, R' = Et, 3h; R = Me, R' = Me, 3i). The molecular structure of 3c was confirmed by X-ray crystallography. Fluorine-substituted complexes 3a-i show significantly higher TOF (turnover frequencies) than the unfluorinated analogues for CO2/(cyclohexene oxide) copolymerization. The TOF is highly sensitive to the substituents R and R', and the highest TOF (2480 h(-1)) is obtained with 3g (R = Me, R' = iPr). Complex 3g is less sensitive to the residual protic impurities present in the monomers and shows activity at such a low catalyst concentration as [Zn]:[cyclohexene oxide] = 1:50,000, at which the unfluorinated analogue is completely inactive. By realizing the activity at such an extremely low [Zn]:[cyclohexene oxide] ratio, we achieve a high TON (turnover number) up to 10,100. High-molecular-weight polymers (M(n), 100,000-200,000) are obtained with a rather broad molecular-weight distribution (M(w)/M(n), 1.3-2.5). The obtained polymers are not perfectly alternating, and variable carbonate linkages (65-85%) are observed depending on the N-aryl ortho substituents R and R' and the polymerization conditions.     

金属-金属键形成反应的研究: [η^5-RO~2CC~5H~4(CO)~3M]~2Hg(R=Me,Et;M=Cr,Mo,W)的合成及鉴定

η^5-RO~2CC~5H~4(CO)~3MNa与R^1HgCl,R^1=Me, Et, Ph)可发生一种非预期的金属键形成反应, 生成[η^5-RO~2CC~5H~4(CO)~3M]~2Hg(R=Me,Et;M=Cr,Mo,W)。对反应中间物η^5-EtO~2CC~5H~4(CO)~3MoHgPh的研究表明: 反应是按缩合及对称化两步机理进行的。(R=Et,M=Mo)属三斜晶系, 空间群P-1。a=0.6333(1), b=0.7712(1), c=1.4204(4)nm; a=77.31(1),β=74.51(2), γ=68.72(1)^°; V=0.61714nm^3;Z=1;D~x=2.246g/cm^3;R=0.044。     

Interaction of tertiary phosphines with lignin-type, alpha,beta-unsaturated aldehydes in water

To learn more about the bleaching action of pulps by (hydroxymethyl)phosphines, lignin chromophores, such as the alpha,beta-unsaturated aromatic aldehydes, sinapaldehyde, coniferylaldehyde, and coumaraldehyde, were reacted with the tertiary phosphines R2R'P [R = R' = Me, Et, (CH2)3OH, iPr, cyclo-C6H11, (CH2)2CN; R = Me or Et, R' = Ph; R = Ph, R' = Me, m-NaSO3-C6H4] in water at room temperature under argon. In all cases, initial nucleophilic attack of the phosphine occurs at the activated C=C bond to form a zwitterionic monophosphonium species. With the phosphines PR3 [R = Me, Et, (CH2)3OH] and with R2R'P (R = Me or Et, R' = Ph), the zwitterion undergoes self-condensation to give a bisphosphonium zwitterion that can react with aqueous HCl to form the corresponding dichloride salts (as a mixture of R,R- and S,S-enantiomers); X-ray structures are presented for the bisphosphonium chlorides synthesized from the Et3P and Me3P reactions with sinapaldehyde. With the more bulky phosphines, iPr3P, MePPh2, (cyclo-C6H11)3P, and Na[Ph2P(m-SO3-C6H4)], only an equilibrium of the monophosphonium zwitterion with the reactant aldehyde is observed. The weakly nucleophilic [NC(CH2)2]3P does not react with sinapaldehyde. An analysis of some exceptional 1H NMR data within the prochiral phosphorus centers of the bisphosphonium chlorides is also presented.     

Synthesis,structure, and reactivity of some sterically hindered (Silylamino)phosphines

A series of new (silylamino)phosphines that contain sterically bulky silyl groups on nitrogen were prepared by deprotonation/substitution reactions of the hindered disilylamines t-BuR(2)Si(Me(3)Si)NH (1, R = Me; 2, R = Ph) and (Et(3)Si)(2)NH (3). Sequential treatment of the N-lithio derivatives of 1-3 with PCl(3) or PhPCl(2) and MeLi gave the corresponding (silylamino)phosphines t-BuR(2)Si(Me(3)Si)NP(R')Me (5, R = Me, R' = Ph; 6, R = Ph, R' = Me) and (Et(3)Si)(2)NP(R)Me (11, R = Me; 12, R = Ph) in high yields. Two of the P-chloro intermediates t-BuR(2)Si(Me(3)Si)NP(Ph)Cl (7, R = Ph; 9, R = Me) were also isolated and fully characterized. Hydrolysis of 7 afforded the crystalline PH-substituted aminophosphine oxide t-BuPh(2)SiN(H)P(Ph)(=O)H (10). Thermal decomposition of 7 occurred with elimination of Me(3)SiCl and formation of a novel P(2)N(2) four-membered ring system (36) that contains both P(III) and P(V) centers. Reactions of the N-lithio derivatives of amines 1 and 2 with phosphorus trihalides afforded the thermally stable -PF(2) derivatives t-BuR(2)Si(Me(3)Si)NPF(2) (13, R = Me; 14, R = Ph) and the unstable -PCl(2) analogue 17 (R = Ph). Reduction (using LiAlH(4)) of the SiPh-substituted dihalophosphines 14 and 17 gave the unstable parent phosphine t-BuPh(2)Si(Me(3)Si)NPH(2) (15). The P-organo-substituted (silylamino)phosphines underwent oxidative bromination to afford high yields of the corresponding N-silyl-P-bromophosphoranimines t-BuR(2)SiN=P(R')(Me)Br (18, R = R' = Me; 19, R = Me, R' = Ph; 20, R = Ph, R' = Me) and Et(3)SiN=P(R)(Me)Br (23, R = Me; 24, R = Ph). Subsequent treatment of these reactive PBr compounds with lithium trifluoroethoxide or phenoxide produced the corresponding PO derivatives t-BuR(2)SiN=P(R')(Me)OR' ' (25 and 26, R' ' = CH(2)CF(3); 28-30, R' ' = Ph) and Et(3)SiN=P(R)(Me)OR' (31 and 33, R' = CH(2)CF(3); 32 and 34, R = Ph), respectively. Many of the new compounds containing the bulky tert-butyldiphenylsilyl group, t-BuPh(2)Si, were solids that gave crystals suitable for X-ray diffraction studies. Consequently, the crystal structures of three (silylamino)phosphines (6, 7, and 14), one (silylamino)phosphine oxide (10), one N-silylphosphoranimine (30), and the cyclic compound 36 were determined. Among the (silylamino)phosphines, the P-N bond distances [6, N-PMe(2), 1.725(3) A; 7, N-P(Ph)Cl, 1.68(1) A, 14, N-PF(2), 1.652(4) A] decreased significantly as the electron-withdrawing nature of the phosphorus substituents increased. The N-silylphosphoranimine t-BuPh(2)SiN=PMe(2)OPh (30), which is a model system for poly(phosphazene) precursors, had a much shorter P=N distance of 1.512(6) A and a wide Si-N-P bond angle of 166.4(3) degrees. A similar P=N bond distance [1.514(7) A] and Si-N-P angle [169.9(6) degrees ] were observed for the exocyclic P=N-Si linkage in the ring compound 36, while the phosphine oxide 10 had P-N and P=O distances of 1.637(4) and 1.496(3) A, respectively, and a Si-N-P angle of 134.3(2) degrees.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Reactions at the B–B Bond of Bis(trisyl)oxadiborirane: Ring Extensions

The B–B bond of bis(trisyl)oxadiborirane OB₂R₂ (R = C(SiMe₃)₃) is opened by amides R′CO(NHR″) to give the dioxaazadiboracyclohexanes [–BR–O–BR–NR″–CHR′–O–] (R′/R″ = H/H, H/Me, H/Et, Me/H: 5 a – d ). The amide MeCO(NHMe) yields 5 e (R′/R″ = Me/Me), when an excess of the amide is applied for 24 h, but yields an isomeric 1 : 1 adduct ( 6 e ), when a stoichiometric amount of the amide is applied for 15 h; upon refluxing this isomer in hexane, it is transformed into 5 e .     

鸟嘌呤受羟基自由基损伤反应机理的量子化学研究

用密度泛函理论(DFT)研究羟基自由基与鸟嘌呤分子加成反应的过渡态, 并进行内禀反应坐标(IRC)反应路径解析, 结果表明, 羟基自由基加成到鸟嘌呤碳碳双键上. 利用B3LYP/6-31++G**对反应物、反应物络合物、过渡态以及产物络合物等反应通道上各个能量驻点的能量进行了计算, 得到反应活化能E_a=28.0867 kJ/mol. AIM计算结果显示, 过渡态结构中鸟嘌呤分子碳碳双键结构被削弱, 羟基自由基氧原子与鸟嘌呤分子碳碳双键中的C4原子具有较强的相互作用, 双键中剩余的π电子离域到了环体系中.     

Cyclic and linear polyferrocenes with silicon and tin as alternating bridges

The synthesis and characterization of ferrocene-based oligomers that contained two different elements (Si and Sn) as alternating bridges is described for the first time. The salt-metathesis reaction of R(2) Si[(C(5) H(4) )Fe(C(5) H(4) Li)](2) (R=Me, Et) with R'(2) SnCl(2) (R'=Me, nBu, tBu) afforded a mixture of oligomers (6(Me) SnMe(2), 6(Et) SnMe(2), 6(Me) SnnBu(2), 6(Et) SnnBu(2), 6(Me) SntBu(2), and 6(Et) SntBu(2)). These oligomers were characterized by (1) H, (13) C, (29) Si, and (119) Sn?NMR spectroscopy and by mass spectrometry. MS (MALDI-TOF) studies of 6(Et) SnMe(2) revealed the presence of linear (l) and cyclic (c) species that contained up to 20?ferrocene moieties. The molecular weights of the polymers were determined by gel-permeation chromatography (GPC) and by dynamic-light scattering (DLS). GPC analysis revealed average molecular weights of 2100-6300?Da with respect to polystyrene as a standard. DLS analysis yielded very similar results. Some compounds, c-(6(Me) SnMe(2) )(1), c-(6(Me) SntBu(2))(2), c-(6(Et) SnMe(2))(1), c-(6(Et) SntBu(2))(2), l-(6(Me) SnnBu(2) )(2), and l-(6(Me) SnnBu(2))(3), which contained up to six ferrocene moieties, were isolated in their pure form either by column chromatography or by crystallization. The Si- and Sn-bridged macrocycles that contained four ferrocene units (c-(6(Me) SntBu(2))(2) and c-(6(Et) SntBu(2))(2)) were structurally characterized by single-crystal X-ray analysis.     

Aluminum and zinc complexes based on an amino-bis(pyrazolyl) ligand: synthesis, structures, and use in MMA and lactide polymerization

The coordination chemistry of bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (1, LH) with aluminum- and zinc-alkyls has been studied. Reaction of 1 with AlR3 affords the adducts [LH] x AlR3 (R = Me, 2; Et, 3), which undergo alkane elimination upon heating to yield the amido complexes [L]AlR2 (R = Me, 4; Et, 5). Reaction of LiO(iPrO)C=CMe2 with 2 proceeds via N-H deprotonation to give Li[L]AlMe3 (6), while the former enolate adds to 4 to generate [Me2C=C(OiPr)OLi] x [L]AlMe2 (7). Similarly, the 1:1 reaction of ZnEt2 with 1 gives [LH] x ZnEt2 (9), which is transformed into [L]ZnEt (10) upon heating. When an excess of ZnEt2 was used in the latter reaction, the bimetallic complex [L]ZnEt x ZnEt2 (11) was isolated beside 10. Performing the same reaction in the presence of O2 traces yielded selectively the dinuclear ethyl-ethoxide complex [L]Zn2Et2(mu-OEt) (12), which was alternatively prepared from the reaction of 10 and ZnEt(OEt). Zinc chloride complexes [LH] x ZnRCl (R = Et, 13; p-CH3C6H4CH2, 14) and [L]ZnCl (15) were prepared in high yields following similar strategies. Ethyl abstraction from 10 with B(C6F5)3 yields [L]Zn+EtB(C6F5)3- (16). All complexes have been characterized by multinuclear nuclear magnetic resonance (NMR), elemental analysis, and single-crystal X-ray diffraction studies for four-coordinate Al complexes 2, 4, and 6 and Zn complexes 9-12 and 14. Aluminate species 6 and 7 initiate the polymerization of methyl methacrylate, and the monomer conversions are improved in the presence of neutral complexes 2 or 4, respectively; however, these methyl methacrylate (MMA) polymerizations are uncontrolled. Polymerization of rac-lactide takes place at 20 degrees C in the presence of zinc ethoxide complex 12 to yield atactic polymers with controlled molecular masses and relatively narrow polydispersities.     

Spin-trapping of oxygen free radicals in chemical and biological systems: new traps, radicals and possibilities

The choice of the spin-trap that is to be applied in any EPR study represents the crossroad between a comprehensive investigation and an "ordinary" quantification of production of radicals. So, the scope of our study was to compare the performance of different spin-traps for qualitative analysis of radical-generating systems, and their ability to recognize previously unnoticed radicals. In addition, we present a brief account of the difficulties involved in the detection of oxygen-centered radicals in chemical and biological systems accompanied by the rationale for using the EPR spin-trapping technique in quantitative studies of such reactive species. Certain technical aspects of EPR experiments related to efficient trapping of free radicals in biochemical systems are also discussed. As an example we present here results obtained using EPR spectroscopy and the spin-trap DEPMPO, which show that the Fenton reaction, as well as various biological systems generate a previously unappreciated hydrogen (*H) atom.     

Aluminacyclopropene: syntheses, characterization, and reactivity toward terminal alkynes

Reactions of LAl with ethyne, mono- and disubstituted alkynes, and diyne to aluminacyclopropene LAl[eta2-C2(R1)(R2)] ((L = HC[(CMe)(NAr)]2, Ar = 2,6-iPr2C6H3); R1 = R2 = H, (1); R1 = H, R2 = Ph, (2); R1 = R2 = Me, (3); R1 = SiMe3, R2 = C[triple bond]CSiMe3, (4)) are reported. Compounds 1 and 2 were obtained in equimolar quantities of the starting materials at low temperature. The amount of C2H2 was controlled by removing an excess of C2H2 in the range from -78 to -50 degrees C. Compound 4 can be alternatively prepared by the substitution reaction of LAl[eta2-C2(SiMe3)2] with Me3SiC[triple bond]CC[triple bond]CSiMe3 or by the reductive coupling reaction of LAlI2 with potassium in the presence of Me3SiC[triple bond]CC[triple bond]CSiMe3. The reaction of LAl with excess C2H2 and PhC[triple bond]CH (<1:2) afforded the respective alkenylalkynylaluminum compounds LAl(CH=CH2)(C[triple bond]CH) (5) and LAl(CH=CHPh)(C[triple bond]CPh) (6). The reaction of LAl(eta2-C2Ph2) with C2H2 and PhC[triple bond]CH yielded LAl(CPh=CHPh)(C[triple bond]CH) (7) and LAl(CPh=CHPh)(C[triple bond]CPh) (8), respectively. Rationally, the formation of 5 (or 6) may proceed through the corresponding precursor 1 (or 2). The theoretical studies based on DFT calculations show that an interaction between the Al(I) center and the C[triple bond]C unit needs almost no activation energy. Within the AlC2 ring the computational Al-C bond order of ca. 1 suggests an Al-C sigma bond and therefore less pi electron delocalization over the AlC2 ring. The computed Al-eta2-C2 bond dissociation energies (155-82.6 kJ/mol) indicate a remarkable reactivity of aluminacyclopropene species. Finally, the 1H NMR spectroscopy monitored reaction of LAl(eta2-C2Ph2) and PhC[triple bond]CH in toluene-d8 may reveal an acetylenic hydrogen migration process.     

Quenched gas-phase reactions of tetraborane(10), B4H10, with substituted alkynes: new nido-dicarbapentaboranes and arachno-monocarbapentaboranes

New alkyl derivatives of the nido-dicarbapentaborane, 1,2-C(2)B(3)H(7), and arachno-carbapentaborane, 1-CB(4)H(10), have been identified as the main volatile carbaborane products in quenched gas-phase reactions of tetraborane(10), B(4)H(10), with alkyl-substituted ethynes RC[triple bond]CR' (R = Me, Et, (n)Pr or (t)Bu, R' = H; R = Me or Et, R' = Me). The gaseous mixtures were heated at 70 degrees C, and monitored by gas-phase mass spectrometry. Each reaction was quenched when the ethyne was used up. The quenched gas-phase reaction of B(4)H(10) and Me(3)SiC[triple bond]CH gave a single volatile carbaborane product, 1-Me(3)Si-1,2-C(2)B(3)H(6).